7:13 a.m.
Hi All,
I did successfully upgraded my 4.1 hosted engine and the first node to 4.2.3. Since
upgrade, the node's 10Gbe connection does not work. It was the connection between host
and storage. That is why, now I can't activate my node.
I have IP and I have all of bonding, and it seems to fine. All other networks and bonds
(1gbe) is working fine, I can communicate with other hosts.
I had a mode-1 (active/passive) bonding on that interfaces. I can ping from other nodes,
but not from this.
Also, I did a full OS upgrade (yum update) on node.
Somebody could me help?
Thanks in advance,
R
Tibor
3:09 a.m.
New subject: Upgrade host to 4.2 - 10gbe connection does not work anymore
Hi Tibor,
Could you please provide the output of "ip address" and "vdsm-client Host
getCapabilities", "ethtool <dev name>"?
Also, please mention what is the network name which is defined to use this
device.
Thanks,
Edy.
On Wed, May 9, 2018 at 3:13 PM, Demeter Tibor <tdemeter(a)itsmart.hu> wrote:
Hi All,
I did successfully upgraded my 4.1 hosted engine and the first node to
4.2.3. Since upgrade, the node's 10Gbe connection does not work. It was the
connection between host and storage. That is why, now I can't activate my
node.
I have IP and I have all of bonding, and it seems to fine. All other
networks and bonds (1gbe) is working fine, I can communicate with other
hosts.
I had a mode-1 (active/passive) bonding on that interfaces. I can ping
from other nodes, but not from this.
Also, I did a full OS upgrade (yum update) on node.
Somebody could me help?
Thanks in advance,
R
Tibor
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
3:15 a.m.
New subject: Upgrade host to 4.2 - 10gbe connection does not work anymore
Hi,
Meanwhile I could repair my network connections.
Thank you
R
Tibor
----- 2018. máj.. 10., 10:09, Edward Haas <ehaas(a)redhat.com> írta:
egarsHi Tibor,
Could you please provide the output of "ip address" and
"vdsm-client Host
getCapabilities", "ethtool <dev name>"?
Also, please mention what is the network name which is defined to use this
device.
Thanks,
Edy.
On Wed, May 9, 2018 at 3:13 PM, Demeter Tibor < [
mailto:tdemeter@itsmart.hu |
tdemeter(a)itsmart.hu ] > wrote:
> Hi All,
> I did successfully upgraded my 4.1 hosted engine and the first
node to 4.2.3.
> Since upgrade, the node's 10Gbe connection does not work. It was the connection
> between host and storage. That is why, now I can't activate my node.
> I have IP and I have all of bonding, and it seems to fine. All other networks
> and bonds (1gbe) is working fine, I can communicate with other hosts.
> I had a mode-1 (active/passive) bonding on that interfaces. I can ping from
> other nodes, but not from this.
> Also, I did a full OS upgrade (yum update) on node.
> Somebody could me help?
> Thanks in advance,
> R
> Tibor
> _______________________________________________
> Users mailing list -- [ mailto:users@ovirt.org | users(a)ovirt.org ]
> To unsubscribe send an email to [ mailto:users-leave@ovirt.org |
> users-leave(a)ovirt.org ]
2185
days inactive
2186
days old
2 comments
2 participants
participants (2)
-
Demeter Tibor -
Edward Haas