Check if there’s another lvm.conf file in the dir like lvm.conf.rpmsave and swap them out. I recall having to do something similar to solve a deployment issue much like yours On Wed, Jun 30, 2021 at 6:39 PM <coradat@gmail.com> wrote:

Been beating my head against this for a while, but I'm having issues deploying a new 4.4.6 node hyperconverged cluster. It's a homelab/dev environment, so it's on pretty outdated hardware, SuperMicro X8DTT based systems. No on board raid controller, so that should help at least. Storage drives are a software raid 0 of two 1T SSDs at /dev/md/ovstore and disk traffic is on a separate network from management traffic; ssh-copy-id was run for both interfaces. It looks like it fails when trying to create the volume group on the VDO but I cannot figure out why it's excluded. /etc/lvm/lvm.conf is (should be) default from the install, raid is formatted with no partitions, and I've done a wipefs on the raid. I've been able to complete the same install on these devices with Node 4.3.9, but not 4.4.6. Logs are available at https://pastebin.com/yBzUpe3c _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3BVNTQI62BD2DE...