Anyone else have this problem? I haven't been able to find a solution. Don On Tue, Nov 19, 2019 at 10:03 AM Don Dupuis <dondster@gmail.com> wrote:

with that approach, still get same error.

Don

On Mon, Nov 18, 2019 at 10:49 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

...

I would recommend you to "unpresent" that USB, then replug (if that's possible) the USB and then to refresh the hosts's Capabilities (management dropdown). Only then try to assign the USB.

Best Regards, Strahil Nikolov

В вторник, 19 ноември 2019 г., 05:30:00 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

I am trying to pass through a USB Dongle to a Windows virtual machine in ovirt 4.3.6. This will work if these options aren't used. Below is the output of lsusb with no iommu enable:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 1604:10c0 Tascam Bus 001 Device 004: ID 1604:10c0 Tascam Bus 001 Device 003: ID 1604:10c0 Tascam Bus 001 Device 002: ID 07f2:0001 Microcomputer Applications, Inc. KEYLOK II Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The device I am passing through is Bus 001 Device 002.

This is the error I get in vdsmd.log:

Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 867, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2890, in _run self._domDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2466, in _domDependentInit self._vmDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2480, in _vmDependentInit self._getUnderlyingVmDevicesInfo() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2448, in _getUnderlyingVmDevicesInfo vmdevices.common.update_device_info(self, self._devices) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/common.py", line 94, in update_device_info hostdevice.HostDevice.update_device_info(vm, devices[hwclass.HOSTDEV]) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 426, in update_device_info vm, device_conf, device_xml) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 223, in update_from_xml if host_address == dev.hostAddress: AttributeError: 'MdevDevice' object has no attribute 'hostAddress' 2019-11-18 18:20:06,173-0600 INFO (vm/9944089c) [virt.vm] (vmId='9944089c-2109-4352-a0c6-7d0d9e04bb3f') Changed state to Down: 'MdevDevice' object has no attribute 'hostAddress' (code=1) (vm:1690)

I am using kernel 3.10.0-957.12.1.el7.x86_64

vdsm is vdsm-4.30.33-1.el7.x86_64 libvirt is libvirt-5.0.0-1.el7.x86_64 qemu is qemu-img-ev-2.12.0-33.1.el7.x86_64

Any help with this issue would be appreciated.

Thanks Don _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JWP5GNYJWH7HD...

I have created a bug and the number is 1775306. Thanks Don On Thu, Nov 21, 2019 at 9:46 AM Michal Skrivanek < michal.skrivanek@redhat.com> wrote:

On 21 Nov 2019, at 16:31, Don Dupuis <dondster@gmail.com> wrote:

Anyone else have this problem? I haven't been able to find a solution.

Don

On Tue, Nov 19, 2019 at 10:03 AM Don Dupuis <dondster@gmail.com> wrote:

...

with that approach, still get same error.

Don

On Mon, Nov 18, 2019 at 10:49 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

...

I would recommend you to "unpresent" that USB, then replug (if that's possible) the USB and then to refresh the hosts's Capabilities (management dropdown). Only then try to assign the USB.

Best Regards, Strahil Nikolov

В вторник, 19 ноември 2019 г., 05:30:00 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

I am trying to pass through a USB Dongle to a Windows virtual machine in ovirt 4.3.6. This will work if these options aren't used. Below is the output of lsusb with no iommu enable:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 1604:10c0 Tascam Bus 001 Device 004: ID 1604:10c0 Tascam Bus 001 Device 003: ID 1604:10c0 Tascam Bus 001 Device 002: ID 07f2:0001 Microcomputer Applications, Inc. KEYLOK II Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The device I am passing through is Bus 001 Device 002.

This is the error I get in vdsmd.log:

Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 867, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2890, in _run self._domDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2466, in _domDependentInit self._vmDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2480, in _vmDependentInit self._getUnderlyingVmDevicesInfo() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2448, in _getUnderlyingVmDevicesInfo vmdevices.common.update_device_info(self, self._devices) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/common.py", line 94, in update_device_info hostdevice.HostDevice.update_device_info(vm, devices[hwclass.HOSTDEV]) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 426, in update_device_info vm, device_conf, device_xml) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 223, in update_from_xml if host_address == dev.hostAddress: AttributeError: 'MdevDevice' object has no attribute 'hostAddress' 2019-11-18 18:20:06,173-0600 INFO (vm/9944089c) [virt.vm] (vmId='9944089c-2109-4352-a0c6-7d0d9e04bb3f') Changed state to Down: 'MdevDevice' object has no attribute 'hostAddress' (code=1) (vm:1690)

Looks like a code bug. Would you please open it? On vdsm, oVirt team “virt”

Thanks, michal

...

...

I am using kernel 3.10.0-957.12.1.el7.x86_64

vdsm is vdsm-4.30.33-1.el7.x86_64 libvirt is libvirt-5.0.0-1.el7.x86_64 qemu is qemu-img-ev-2.12.0-33.1.el7.x86_64

Any help with this issue would be appreciated.

Thanks Don _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JWP5GNYJWH7HD...

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BFES4PVZJ5LTNW...

Actually this is broken on an earlier version of ovirt at another customer of mine. They are running ovirt 4.2.3. I tried to make sure I could get it working on the latest release in order to troubleshoot that issue. I have provided the latest information and created the bugzilla case. Don On Fri, Nov 22, 2019 at 2:51 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

Have you checked if the issue is specific to this host ? Also , check on another VM.

Best Regards, Strahil Nikolov

В четвъртък, 21 ноември 2019 г., 17:31:33 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

Anyone else have this problem? I haven't been able to find a solution.

Don

On Tue, Nov 19, 2019 at 10:03 AM Don Dupuis <dondster@gmail.com> wrote:

with that approach, still get same error.

Don

On Mon, Nov 18, 2019 at 10:49 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

I would recommend you to "unpresent" that USB, then replug (if that's possible) the USB and then to refresh the hosts's Capabilities (management dropdown). Only then try to assign the USB.

Best Regards, Strahil Nikolov

В вторник, 19 ноември 2019 г., 05:30:00 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

I am trying to pass through a USB Dongle to a Windows virtual machine in ovirt 4.3.6. This will work if these options aren't used. Below is the output of lsusb with no iommu enable:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 1604:10c0 Tascam Bus 001 Device 004: ID 1604:10c0 Tascam Bus 001 Device 003: ID 1604:10c0 Tascam Bus 001 Device 002: ID 07f2:0001 Microcomputer Applications, Inc. KEYLOK II Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The device I am passing through is Bus 001 Device 002.

This is the error I get in vdsmd.log:

Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 867, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2890, in _run self._domDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2466, in _domDependentInit self._vmDependentInit() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2480, in _vmDependentInit self._getUnderlyingVmDevicesInfo() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2448, in _getUnderlyingVmDevicesInfo vmdevices.common.update_device_info(self, self._devices) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/common.py", line 94, in update_device_info hostdevice.HostDevice.update_device_info(vm, devices[hwclass.HOSTDEV]) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 426, in update_device_info vm, device_conf, device_xml) File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 223, in update_from_xml if host_address == dev.hostAddress: AttributeError: 'MdevDevice' object has no attribute 'hostAddress' 2019-11-18 18:20:06,173-0600 INFO (vm/9944089c) [virt.vm] (vmId='9944089c-2109-4352-a0c6-7d0d9e04bb3f') Changed state to Down: 'MdevDevice' object has no attribute 'hostAddress' (code=1) (vm:1690)

I am using kernel 3.10.0-957.12.1.el7.x86_64

vdsm is vdsm-4.30.33-1.el7.x86_64 libvirt is libvirt-5.0.0-1.el7.x86_64 qemu is qemu-img-ev-2.12.0-33.1.el7.x86_64

Any help with this issue would be appreciated.

Thanks Don _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JWP5GNYJWH7HD...

I will double check that as I believe all the usb ports on this sever is USB 3.0. Support on 3.0 still should be tested and fixed if it is broken. Again it will work as long as the iommu is now enabled!!!. Don On Fri, Nov 22, 2019 at 3:43 PM Green, Jacob Allen /C < jacob.a.green@exxonmobil.com> wrote:

Have you tried making sure it is plugged into a USB 2.0 port or hub? I have had no luck passing through USB3.0 in the past.

*Jacob Green*

Container Platform Engineer

EMIT | APPS | Modern Apps & Platforms

ExxonMobil Information Technology

1735 Hughes Landing Blvd, The Woodlands, TX 77381 | TEL:+1-832-624-4348

*From:* Don Dupuis [mailto:dondster@gmail.com] *Sent:* Friday, November 22, 2019 3:05 PM *To:* Strahil Nikolov <hunter86_bg@yahoo.com> *Cc:* users <users@ovirt.org> *Subject:* [ovirt-users] Re: Ovirt 4.3.6 USB passthrough not working with iommu_intel=on iommu=pt

Actually this is broken on an earlier version of ovirt at another customer of mine. They are running ovirt 4.2.3. I tried to make sure I could get it working on the latest release in order to troubleshoot that issue. I have provided the latest information and created the bugzilla case.

Don

On Fri, Nov 22, 2019 at 2:51 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

Have you checked if the issue is specific to this host ?

Also , check on another VM.

Best Regards,

Strahil Nikolov

В четвъртък, 21 ноември 2019 г., 17:31:33 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

Anyone else have this problem? I haven't been able to find a solution.

Don

On Tue, Nov 19, 2019 at 10:03 AM Don Dupuis <dondster@gmail.com> wrote:

with that approach, still get same error.

Don

On Mon, Nov 18, 2019 at 10:49 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:

I would recommend you to "unpresent" that USB, then replug (if that's possible) the USB and then to refresh the hosts's Capabilities (management dropdown). Only then try to assign the USB.

Best Regards,

Strahil Nikolov

В вторник, 19 ноември 2019 г., 05:30:00 ч. Гринуич+2, Don Dupuis < dondster@gmail.com> написа:

I am trying to pass through a USB Dongle to a Windows virtual machine in ovirt 4.3.6. This will work if these options aren't used. Below is the output of lsusb with no iommu enable:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 005: ID 1604:10c0 Tascam

Bus 001 Device 004: ID 1604:10c0 Tascam

Bus 001 Device 003: ID 1604:10c0 Tascam

Bus 001 Device 002: ID 07f2:0001 Microcomputer Applications, Inc. KEYLOK II

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The device I am passing through is Bus 001 Device 002.

This is the error I get in vdsmd.log:

Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 867, in _startUnderlyingVm

self._run()

File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2890, in _run

self._domDependentInit()

File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2466, in _domDependentInit

self._vmDependentInit()

File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2480, in _vmDependentInit

self._getUnderlyingVmDevicesInfo()

File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2448, in _getUnderlyingVmDevicesInfo

vmdevices.common.update_device_info(self, self._devices)

File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/common.py", line 94, in update_device_info

hostdevice.HostDevice.update_device_info(vm, devices[hwclass.HOSTDEV])

File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 426, in update_device_info

vm, device_conf, device_xml)

File "/usr/lib/python2.7/site-packages/vdsm/virt/vmdevices/hostdevice.py", line 223, in update_from_xml

if host_address == dev.hostAddress:

AttributeError: 'MdevDevice' object has no attribute 'hostAddress'

2019-11-18 18:20:06,173-0600 INFO (vm/9944089c) [virt.vm] (vmId='9944089c-2109-4352-a0c6-7d0d9e04bb3f') Changed state to Down: 'MdevDevice' object has no attribute 'hostAddress' (code=1) (vm:1690)

I am using kernel 3.10.0-957.12.1.el7.x86_64

vdsm is vdsm-4.30.33-1.el7.x86_64

libvirt is libvirt-5.0.0-1.el7.x86_64

qemu is qemu-img-ev-2.12.0-33.1.el7.x86_64

Any help with this issue would be appreciated.

Thanks

Don

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JWP5GNYJWH7HD...