3:52 a.m.
Hi,
I'm trying to reinstall but when I execute: engine-cleanup I get the
following errors:
<---->
[root@test ~]# engine-cleanup
WARNING: Executing oVirt Engine cleanup utility.
This utility will wipe all existing data including configuration settings,
certificates and database.
In addition, all existing DB connections will be closed.
Would you like to proceed? (yes|no): yes
Stopping ovirt-engine service... [ ERROR ]
Error: Couldn't connect to the database server.Check that connection is
working and rerun the cleanup utility
Error: Cleanup failed.
please check log at
/var/log/ovirt-engine/engine-cleanup_2012_10_10_23_38_30.log
<---->
And If I execute engine-setup, those ones:
<---->
[root@test ~]# engine-setup
Welcome to oVirt Engine setup utility
In order to proceed the installer must stop the ovirt-engine service
Would you like to stop the ovirt-engine service? (yes|no): yes
Stopping ovirt-engine service... Error: Can't stop the ovirt-engine service
Please check log file
/var/log/ovirt-engine/engine-setup_2012_10_10_23_49_28.log for more
information
<---->
Log file:
<---->
2012-10-10 23:49:29::DEBUG::common_utils::335::root:: stderr =
2012-10-10 23:49:29::DEBUG::common_utils::336::root:: retcode = 0
2012-10-10 23:49:29::DEBUG::engine-setup::1992::root:: Found a match,
amount of memory: 2887
2012-10-10 23:49:29::WARNING::engine-setup::2003::root:: There is less then
4096 available memory
2012-10-10 23:49:29::DEBUG::engine-setup::1897::root:: Entered
main(configFile='None')
2012-10-10 23:49:29::DEBUG::engine-setup::1684::root:: stopping
ovirt-engine service
2012-10-10 23:49:29::DEBUG::common_utils::815::root:: asking user: Would
you like to stop the ovirt-engine service? (yes|no):
2012-10-10 23:49:30::DEBUG::common_utils::819::root:: user answered: yes
2012-10-10 23:49:30::DEBUG::common_utils::1059::root:: stopping ovirt-engine
2012-10-10 23:49:30::DEBUG::common_utils::1096::root:: executing action
ovirt-engine on service stop
2012-10-10 23:49:30::DEBUG::common_utils::294::root:: Executing command -->
'/sbin/service ovirt-engine stop'
2012-10-10 23:49:30::DEBUG::common_utils::334::root:: output = Stopping
engine-service: [FAILED]
2012-10-10 23:49:30::DEBUG::common_utils::335::root:: stderr =
2012-10-10 23:49:30::DEBUG::common_utils::336::root:: retcode = 1
2012-10-10 23:49:30::DEBUG::engine-setup::1771::root:: *** The following
params were used as user input:
2012-10-10 23:49:30::ERROR::engine-setup::2170::root:: Traceback (most
recent call last):
File "/usr/bin/engine-setup", line 2164, in <module>
main(confFile)
File "/usr/bin/engine-setup", line 1911, in main
if not _stopEngine(configFile):
File "/usr/bin/engine-setup", line 1693, in _stopEngine
jservice.stop(True)
File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1064, in stop
raise Exception(output_messages.ERR_FAILED_STOP_SERVICE % self.name)
Exception: Error: Can't stop the ovirt-engine service
<---->
I removed all oVirt packages and installed again (yum), but the same error.
What can I do ?
Regards.-
--
AGD
3:56 a.m.
----- Original Message -----
From: "Andres Gonzalez" <tuchoz(a)gmail.com>
To: "<users(a)ovirt.org>" <users(a)ovirt.org>
Sent: Thursday, October 11, 2012 3:52:16 AM
Subject: [Users] [oVirt 3.1] reinstallation
<snip>
I removed all oVirt packages and installed again (yum), but the same
error.
What can I do ?
Make sure you do not have java process running, if you have, just kill it.
remove:
/var/run/ovirt-engine*
/var/lib/ovirt-engine
/var/log/ovirt-engine
/var/cache/virt-engine
/etc/ovirt-engine
remove all packages, and install them again, or simply reinstall 'ovirt-engine*'
Alon.
4:30 a.m.
On Wed, Oct 10, 2012 at 11:56 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
----- Original Message -----
> From: "Andres Gonzalez" <tuchoz(a)gmail.com>
> To: "<users(a)ovirt.org>" <users(a)ovirt.org>
> Sent: Thursday, October 11, 2012 3:52:16 AM
> Subject: [Users] [oVirt 3.1] reinstallation
<snip>
>
>
> I removed all oVirt packages and installed again (yum), but the same
> error.
> What can I do ?
>
Make sure you do not have java process running, if you have, just kill it.
remove:
/var/run/ovirt-engine*
/var/lib/ovirt-engine
/var/log/ovirt-engine
/var/cache/virt-engine
/etc/ovirt-engine
remove all packages, and install them again, or simply reinstall
'ovirt-engine*'
Alon.
I killed a java proces that was running, removed everything (except
/var/cache/virt-engine that didn't exist), then removed all ovirt-engine*
and reinstall it (yum install) but still happening the same thing.
It's like is trying to stop the overt-engine process that isn't running.
--
AGD
12:44 p.m.
----- Original Message -----
Hi,
I'm trying to reinstall but when I execute: engine-cleanup I get the
following errors:
<---->
[root@test ~]# engine-cleanup
WARNING: Executing oVirt Engine cleanup utility.
This utility will wipe all existing data including configuration
settings, certificates and database.
In addition, all existing DB connections will be closed.
Would you like to proceed? (yes|no): yes
Stopping ovirt-engine service... [ ERROR ]
Error: Couldn't connect to the database server.Check that connection
is working and rerun the cleanup utility
Error: Cleanup failed.
please check log at
/var/log/ovirt-engine/engine-cleanup_2012_10_10_23_38_30.log
can you please supply this log? it might reveal the actual issue.
also, /var/log/messages might be helpful
few questions:
1. Did you ever touched the postgres configuration?
2. Any special iptables modifications?
Thanks,
Ofer
<---->
And If I execute engine-setup, those ones:
<---->
[root@test ~]# engine-setup
Welcome to oVirt Engine setup utility
In order to proceed the installer must stop the ovirt-engine service
Would you like to stop the ovirt-engine service? (yes|no): yes
Stopping ovirt-engine service... Error: Can't stop the ovirt-engine
service
Please check log file
/var/log/ovirt-engine/engine-setup_2012_10_10_23_49_28.log for more
information
<---->
Log file:
<---->
2012-10-10 23:49:29::DEBUG::common_utils::335::root:: stderr =
2012-10-10 23:49:29::DEBUG::common_utils::336::root:: retcode = 0
2012-10-10 23:49:29::DEBUG::engine-setup::1992::root:: Found a match,
amount of memory: 2887
2012-10-10 23:49:29::WARNING::engine-setup::2003::root:: There is
less then 4096 available memory
2012-10-10 23:49:29::DEBUG::engine-setup::1897::root:: Entered
main(configFile='None')
2012-10-10 23:49:29::DEBUG::engine-setup::1684::root:: stopping
ovirt-engine service
2012-10-10 23:49:29::DEBUG::common_utils::815::root:: asking user:
Would you like to stop the ovirt-engine service? (yes|no):
2012-10-10 23:49:30::DEBUG::common_utils::819::root:: user answered:
yes
2012-10-10 23:49:30::DEBUG::common_utils::1059::root:: stopping
ovirt-engine
2012-10-10 23:49:30::DEBUG::common_utils::1096::root:: executing
action ovirt-engine on service stop
2012-10-10 23:49:30::DEBUG::common_utils::294::root:: Executing
command --> '/sbin/service ovirt-engine stop'
2012-10-10 23:49:30::DEBUG::common_utils::334::root:: output =
Stopping engine-service: [FAILED]
2012-10-10 23:49:30::DEBUG::common_utils::335::root:: stderr =
2012-10-10 23:49:30::DEBUG::common_utils::336::root:: retcode = 1
2012-10-10 23:49:30::DEBUG::engine-setup::1771::root:: *** The
following params were used as user input:
2012-10-10 23:49:30::ERROR::engine-setup::2170::root:: Traceback
(most recent call last):
File "/usr/bin/engine-setup", line 2164, in <module>
main(confFile)
File "/usr/bin/engine-setup", line 1911, in main
if not _stopEngine(configFile):
File "/usr/bin/engine-setup", line 1693, in _stopEngine
jservice.stop(True)
File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1064, in
stop
raise Exception(output_messages.ERR_FAILED_STOP_SERVICE % self.name )
Exception: Error: Can't stop the ovirt-engine service
<---->
I removed all oVirt packages and installed again (yum), but the same
error.
What can I do ?
Regards.-
--
AGD
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:40 p.m.
On Thu, Oct 11, 2012 at 8:44 AM, Ofer Schreiber <oschreib(a)redhat.com> wrote:
----- Original Message -----
>
> Hi,
>
>
> I'm trying to reinstall but when I execute: engine-cleanup I get the
> following errors:
>
>
> <---->
> [root@test ~]# engine-cleanup
>
> WARNING: Executing oVirt Engine cleanup utility.
> This utility will wipe all existing data including configuration
> settings, certificates and database.
> In addition, all existing DB connections will be closed.
> Would you like to proceed? (yes|no): yes
>
>
> Stopping ovirt-engine service... [ ERROR ]
>
>
> Error: Couldn't connect to the database server.Check that connection
> is working and rerun the cleanup utility
> Error: Cleanup failed.
> please check log at
> /var/log/ovirt-engine/engine-cleanup_2012_10_10_23_38_30.log
can you please supply this log? it might reveal the actual issue.
also, /var/log/messages might be helpful
few questions:
1. Did you ever touched the postgres configuration?
2. Any special iptables modifications?
Thanks,
Ofer
Hi, attached are booth files. Regarding your questions, I didn't touched
postgres configuration and the iptables y stopped.
Regards.
--
AGD
10:39 a.m.
Hi,
On 10/11/2012 03:52 AM, Andres Gonzalez wrote:
I'm trying to reinstall but when I execute: engine-cleanup I get
the
following errors:
<snip>
Stopping ovirt-engine service... [ ERROR ]
Error: Couldn't connect to the database server.Check that connection is
working and rerun the cleanup utility
Error: Cleanup failed.
please check log at
/var/log/ovirt-engine/engine-cleanup_2012_10_10_23_38_30.log
I had the same issue and found out what the problem was by looking in
the oVirt start-up logs - the issue was that the database was not
starting, because of an operating system setting (which I documented in
http://wiki.ovirt.org/wiki/Troubleshooting in the section "I am having
trouble connecting to the database. In the system log, I get the
following message from Postgres").
The issue is that SHMMAX is set low on Fedora 17 by default, and you
need to increase it.
Let me know if this is the problem, or whether this is a different issue
for you.
Thanks,
Dave.
--
Dave Neary
Community Action and Impact
Open Source and Standards, Red Hat
Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13
10:23 p.m.
On Sat, Oct 13, 2012 at 6:39 AM, Dave Neary <dneary(a)redhat.com> wrote:
Hi,
On 10/11/2012 03:52 AM, Andres Gonzalez wrote:
> I'm trying to reinstall but when I execute: engine-cleanup I get the
> following errors:
>
<snip>
Stopping ovirt-engine service... [ ERROR ]
>
> Error: Couldn't connect to the database server.Check that connection is
> working and rerun the cleanup utility
> Error: Cleanup failed.
> please check log at
> /var/log/ovirt-engine/engine-**cleanup_2012_10_10_23_38_30.**log
>
I had the same issue and found out what the problem was by looking in the
oVirt start-up logs - the issue was that the database was not starting,
because of an operating system setting (which I documented in
http://wiki.ovirt.org/wiki/**Troubleshooting<http://wiki.ovirt.org/wik...
the section "I am having trouble connecting to the database. In the
system log, I get the following message from Postgres").
The issue is that SHMMAX is set low on Fedora 17 by default, and you need
to increase it.
Let me know if this is the problem, or whether this is a different issue
for you.
Thanks,
Dave.
Hi Dave,
I changed the values according to the wiki but stills happens the same
error.
Regards.
Andres
--
AGD
9:40 a.m.
------=_Part_4284968_312906203.1350546010972
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Hi,=20
Maybe this will help. I create a note, how remove and install a new install=
ation on RHEVM 3.1:=20
Remove / Uninstall RHEVM & VDSM (clear old installation)=20
#### Manager: ####=20
rhevm-cleanup=20
yum -y remove rhevm* vdsm-bootstrap=20
rm -rf /var/log/ovirt-engine/engine*=20
rm -rf /var/log/ovirt-engine/server*=20
rm -rf /tmp/*=20
yum clean all=20
*** Clean PostgresSQL ***=20
psql -U postgres -l=20
dropdb -U postgres engine_2012_06_26_10_20_21=20
psql -U postgres -l=20
#### Host ####=20
service vdsmd stop=20
# service libvirtd stop=20
initctl stop libvirtd=20
service libvirtd status=20
# initctl status libvirtd=20
### yum remove libvirt* vdsm* qemu* sanlock*=20
yum -y remove *vdsm* *libvirt* *qemu* *sanlock* jpackage* vdsm-python*=20
rm -rf /etc/libvirt/DC-04=20
rm -rf /var/lib/libvirt/=20
rm -rf /var/log/vdsm/=20
## rm -rf /var/log/vdsm/vdsm.log*=20
## rm -rf /var/log/vdsm/libvirt.log*=20
rm -rf /tmp/*=20
yum clean all=20
# yum makecache=20
### Disconnect all iSCSI sessions:=20
iscsiadm -m session=20
iscsiadm -m session -u=20
iscsiadm -m node=20
iscsiadm -m node -o delete=20
iscsiadm -m session=20
iscsiadm -m node=20
### umount PosixFS=20
ls -l /rhev/data-center/mnt/10.35.97.44\:_vol1_=20
umount /rhev/data-center/mnt/10.35.97.44\:_vol1_=20
----- Original Message -----
From: "Andres Gonzalez" <tuchoz(a)gmail.com>
To: "Dave Neary" <dneary(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Wednesday, October 17, 2012 10:23:12 PM
Subject: Re: [Users] [oVirt 3.1] reinstallation
On Sat, Oct 13, 2012 at 6:39 AM, Dave Neary < dneary(a)redhat.com
>
wrote:
> Hi,
=20
> On 10/11/2012 03:52 AM, Andres Gonzalez wrote:
=20
> > I'm trying to reinstall but when I execute:
engine-cleanup I get
> > the
>=20
=20
> > following errors:
>=20
=20
> <snip>
=20
> > Stopping ovirt-engine service... [ ERROR ]
>=20
=20
> > Error: Couldn't connect to the database server.Check
that
> > connection
> > is
>=20
=20
> > working and rerun the cleanup utility
>=20
=20
> > Error: Cleanup failed.
>=20
=20
> > please check log at
>=20
=20
> > /var/log/ovirt-engine/engine- cleanup_2012_10_10_23_38_30. log
>=20
=20
> I had the same issue and found out what the problem was by
looking
> in
> the oVirt start-up logs - the issue was that the database was not
> starting, because of an operating system setting (which I
> documented
> in http://wiki.ovirt.org/wiki/ Troubleshooting in the section "I am
> having trouble connecting to the database. In the system log, I get
> the following message from Postgres").
=20
> The issue is that SHMMAX is set low on Fedora 17 by default,
and
> you
> need to increase it.
=20
> Let me know if this is the problem, or whether this is a
different
> issue for you.
=20
> Thanks,
=20
> Dave.
=20
Hi Dave,
I changed the values according to the wiki but stills happens the
same error.
Regards.
Andres
--
AGD
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--=20
Have a nice day =E2=98=BA=E2=98=BB=E2=98=BA=E2=98=BB=E2=98=BA!=20
Thank you and best regards=20
Vladimir Vyazmin=20
Mobile: +972 (0) 50 277 2707=20
Phone: +972 (0) 9 769 2346=20
Email: vvyazmin(a)redhat.com=20
------=_Part_4284968_312906203.1350546010972
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: times new roman,new york,times,serif; font-size: =
12pt; color: #000000'>Hi,<br><br>Maybe this will help. I create a note,
how=
remove and install a new installation on RHEVM 3.1:<br><br>Remove / Uninst=
all RHEVM & VDSM (clear old installation)<br><br>#### Manager: ####
<br=
<br>rhevm-cleanup<br>yum -y remove rhevm*
vdsm-bootstrap<br><br>rm -rf /va=
r/log/ovirt-engine/engine*<br>rm
-rf /var/log/ovirt-engine/server*<br>rm -r=
f /tmp/*<br><br>yum clean all<br><br>*** Clean PostgresSQL
***<br>psql -U p=
ostgres -l<br>dropdb -U postgres engine_2012_06_26_10_20_21<br>psql -U post=
gres -l<br><br><br><br>#### Host #### <br><br>service
vdsmd stop<br># servi=
ce libvirtd stop<br>initctl stop libvirtd<br>service libvirtd
status<br># i=
nitctl status libvirtd<br><br>### yum remove libvirt* vdsm* qemu*
sanlock*<=
br>yum -y remove *vdsm* *libvirt* *qemu* *sanlock* jpackage* vdsm-python*<b=
r>rm -rf /etc/libvirt/DC-04<br>rm -rf /var/lib/libvirt/<br>rm -rf
/var/log/=
vdsm/<br>## rm -rf /var/log/vdsm/vdsm.log*<br>## rm -rf /var/log/vdsm/libvi=
rt.log*<br>rm -rf /tmp/*<br><br>yum clean all<br># yum
makecache<br><br>###=
Disconnect all iSCSI sessions:<br>iscsiadm -m session<br>iscsiadm -m sessi=
on -u<br>iscsiadm -m node<br>iscsiadm -m node -o delete<br>iscsiadm -m
sess=
ion<br>iscsiadm -m node<br><br>### umount PosixFS<br>ls -l
/rhev/data-cente=
r/mnt/10.35.97.44\:_vol1_<br>umount /rhev/data-center/mnt/10.35.97.44\:_vol=
1_<br><br><hr id=3D"zwchr"><blockquote
style=3D"border-left:2px solid rgb(1=
6, 16, 255);margin-left:5px;padding-left:5px;color:#000;font-weight:normal;=
font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-ser=
if;font-size:12pt;"><b>From: </b>"Andres Gonzalez"
&lt;tuchoz(a)gmail.com&gt;=
<br><b>To: </b>"Dave Neary"
&lt;dneary(a)redhat.com&gt;<br><b>Cc: </b>users@o=
virt.org<br><b>Sent: </b>Wednesday, October 17, 2012 10:23:12
PM<br><b>Subj=
ect: </b>Re: [Users] [oVirt 3.1] reinstallation<br><br><div
class=3D"gmail_=
quote">On Sat, Oct 13, 2012 at 6:39 AM, Dave Neary <span
dir=3D"ltr"><<a=
href=3D"mailto:dneary@redhat.com"
target=3D"_blank">dneary(a)redhat.com</a>&=
gt;</span> wrote:<br><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 =
0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi,<div class=3D"im"><br>
<br>
On 10/11/2012 03:52 AM, Andres Gonzalez wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex">
I'm trying to reinstall but when I execute: engine-cleanup I get the<br>
following errors:<br>
</blockquote>
<br></div>
<snip><div class=3D"im"><br>
<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex">
Stopping ovirt-engine service...
=
[ ERROR ]<br>
<br>
Error: Couldn't connect to the database server.Check that connection is<br>
working and rerun the cleanup utility<br>
Error: Cleanup failed.<br>
please check log at<br>
/var/log/ovirt-engine/engine-<u></u>cleanup_2012_10_10_23_38_30.<u></u>log<=
br>
</blockquote>
<br></div>
I had the same issue and found out what the problem was by looking in the o=
Virt start-up logs - the issue was that the database was not starting, beca=
use of an operating system setting (which I documented in <a href=3D"http:/=
/wiki.ovirt.org/wiki/Troubleshooting"
target=3D"_blank">http://wiki.ovirt.o=
rg/wiki/<u></u>Troubleshooting</a> in the section "I am having
trouble conn=
ecting to the database. In the system log, I get the following message from=
Postgres").<br>
<br>
The issue is that SHMMAX is set low on Fedora 17 by default, and you need t=
o increase it.<br>
<br>
Let me know if this is the problem, or whether this is a different issue fo=
r you.<br>
<br>
Thanks,<br>
Dave.<span class=3D"HOEnZb"><font
color=3D"#888888"><br><br></font></span><=
/blockquote><div><br></div><div>Hi
Dave, </div><div><br></div><div>I c=
hanged the values according to the wiki but stills happens the same error.<=
/div>
<div><br></div><div>Regards.</div><div>Andres</div><div> </div></div><=
br><br clear=3D"all"><div><br></div>--
<br>AGD<br>
<br>_______________________________________________<br>Users mailing
list<b=
r>Users@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></blo=
ckquote><br><br><br>-- <br><div><span
name=3D"x"></span><br>Have a nice day=
=E2=98=BA=E2=98=BB=E2=98=BA=E2=98=BB=E2=98=BA!<br>Thank you and best regar=
ds<br><br>Vladimir Vyazmin<br>Mobile: +972 (0) 50 277
2707<br>Phone: =
+972 (0) 9 769 2346<br>Email: vvyazmin(a)redhat.com<span
name=
=3D"x"></span><br></div></div></body></html>
------=_Part_4284968_312906203.1350546010972--
4228
days inactive
4235
days old
7 comments
5 participants
participants (5)
-
Alon Bar-Lev -
Andres Gonzalez -
Dave Neary -
Ofer Schreiber -
Vladimir Vyazmin