2:27 a.m.
Hi ovirt users,
I was trying to check on IRC the below, did not get any replies, so
sending this mail.
Can someone help me understand what could be the issue that causing my
managed host to lose network settings, when i try to discover it from
ovirt-engine ?
I have to then manually (using a remote console) re-setup the network..
it even overrites my ifcfg-eth0 file
I see a new bridge getting added called ovirtmgmt and route entry corr.
to that.. the ifcfg-eth0 also has that entry
I feel that ovirt scripts running on the host should atleast take a
backup of the ifcfg* files they modify so that in case of issues like
these, user can login via remote console and restore the original ifcfg
file.
This is what i asked on IRC... responses appreciated...
deepakcs> Hello, i just configured ovirt-engine and discovering my first
managed host.. got some Qs
<deepakcs> what diff does it make when i select "override ip tables"
check box during new Host workflow ?
* djasa has quit (Ping timeout: 480 seconds)
<deepakcs> this is the second time i am discovering this host and
everytime the host discovery hangs during "Installing" and if i check
the host, it goes out of network.... has anybody faced this problem before ?
<deepakcs> While discovering the host, the host network ipv4 address is
gone ! and thus the host goes out of network
Some more updates..
1) I manually re-setup the host network, made it pingable, esp from the
ovirt-engine node, and clicked on Re-install on the web gui, this time
with the 'override ip tables' check enabled
2) this time it successfully completed the node bootstrap steps (as seen
from the Events window) and status was Reboot
3) But after reboot the same thing happened.. the host lost ipv4 addr,
route entries are completely gone and onthe web gui the host is seen as
non-responsive, which is expected bcos the host is not on the network
anymore...
what is the reason the above is happening ?
3:35 a.m.
--Apple-Mail-AC421548-58A6-42D0-9436-F4095405E006
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
On Jan 28, 2012, at 10:27, Deepak C Shetty <deepakcs(a)linux.vnet.ibm.com> wro=
te:
Hi ovirt users,
=20
I was trying to check on IRC the below, did not get any replies, so sendin=
g this
mail.
Can someone help me understand what could be the issue that causing
my man=
aged host to lose network settings, when i try to discover it from
ovirt-eng=
ine ?
I have to then manually (using a remote console) re-setup the
network.. it=
even overrites my ifcfg-eth0 file
=20
I see a new bridge getting added called ovirtmgmt and route entry corr. to=
that..
the ifcfg-eth0 also has that entry
I feel that ovirt scripts running on the host should atleast take a
backup=
of the ifcfg* files they modify so that in case of issues like these, user
c=
an login via remote console and restore the original ifcfg file.
=20
This is what i asked on IRC... responses appreciated...
=20
deepakcs> Hello, i just configured ovirt-engine and discovering my first m=
anaged host.. got some Qs
<deepakcs> what diff does it make when i select "override
ip tables" check=
box during new Host workflow ?
* djasa has quit (Ping timeout: 480 seconds)
<deepakcs> this is the second time i am discovering this host and everytim=
e
the host discovery hangs during "Installing" and if i check the host, it g=
oes out of network.... has anybody faced this problem before ?
<deepakcs> While discovering the host, the host network ipv4
address is go=
ne ! and thus the host goes out of network
=20
Some more updates..
1) I manually re-setup the host network, made it pingable, esp from the ov=
irt-engine node, and clicked on Re-install on the web gui, this time with th=
e 'override ip tables' check enabled
2) this time it successfully completed the node bootstrap steps (as
seen f=
rom the Events window) and status was Reboot
3) But after reboot the same thing happened.. the host lost ipv4
addr, rou=
te entries are completely gone and onthe web gui the host is seen as
non-res=
ponsive, which is expected bcos the host is not on the network anymore...
=20
what is the reason the above is happening ?
Hi,=20
First, in order to understand the reason for bootstrap failures, please atta=
ch engine.log (ovirt-engine) and node logs (under /tmp/vds_bootstrap.log, vd=
s_installer.log).
Second, what you describe regarding the loss of network could derive from th=
e following reasons:
- host is configured with bonding - but bonding is not configured correctly.=
- NetworkManager interfere with networking config.
- bridge (ovirtmgmt) is not set to with any BOOTPROTO or ONBOOT.
Please attach network scripts (ifcfg-eth0, ifcfg-ovirtmgmt) and /var/log/mes=
sages .
Haim
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--Apple-Mail-AC421548-58A6-42D0-9436-F4095405E006
Content-Transfer-Encoding: base64
Content-Type: text/html;
charset=utf-8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--Apple-Mail-AC421548-58A6-42D0-9436-F4095405E006--
3:45 a.m.
This is a multi-part message in MIME format.
--------------020008080101020100040909
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
First, in order to understand the reason for bootstrap failures,
please attach engine.log (ovirt-engine) and node logs (under
/tmp/vds_bootstrap.log, vds_installer.log).
Second, what you describe regarding the loss of network could derive
from the following reasons:
- host is configured with bonding - but bonding is not configured
correctly.
- NetworkManager interfere with networking config.
- bridge (ovirtmgmt) is not set to with any BOOTPROTO or ONBOOT.
Please attach network scripts (ifcfg-eth0, ifcfg-ovirtmgmt) and
/var/log/messages .
Hi,
I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think ONBOOT
was probably not there.
BTW, before i attach any files here, is there a way to remove the host
and re-discover it afresh ?
ovirt web gui does not give me any option to remove.. the Remove is
diabled and host is in Non Responsive state.
How do i remove and start from scratch and then i can try to see if i
can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to remove the host.
--------------020008080101020100040909
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#ffffff">
<br>
<blockquote
cite="mid:E548E5C8-2D77-4E58-950D-26DE58B1F8F2@redhat.com"
type="cite">
<div style="text-align: left; direction: ltr;">Hi, </div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">First, in order to
understand the reason for bootstrap failures, please attach
engine.log (ovirt-engine) and node logs (under
/tmp/vds_bootstrap.log, vds_installer.log).</div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">Second, what you
describe regarding the loss of network could derive from the
following reasons:</div>
<div style="text-align: left; direction: ltr;">- host is
configured with bonding - but bonding is not configured
correctly.</div>
<div style="text-align: left; direction: ltr;">- NetworkManager
interfere  with networking config.</div>
<div style="text-align: left; direction: ltr;">- bridge
(ovirtmgmt) is not set to with any BOOTPROTO or ONBOOT.</div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">Please attach
network scripts (ifcfg-eth0, ifcfg-ovirtmgmt) and
/var/log/messages .</div>
<br>
</blockquote>
<br>
<tt>Hi,<br>
   I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think
ONBOOT was probably not there.<br>
BTW, before i attach any files here, is there a way to remove the
host and re-discover it afresh ? <br>
ovirt web gui does not give me any option to remove.. the Remove
is diabled and host is in Non Responsive state.<br>
How do i remove and start from scratch and then i can try to see
if i can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to
remove the host.<br>
</tt>
</body>
</html>
--------------020008080101020100040909--
3:54 a.m.
--Apple-Mail-6FEA0081-096F-43B7-982A-2A0C8455E896
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
On Jan 28, 2012, at 11:45, Deepak C Shetty <deepakcs(a)linux.vnet.ibm.com> wro=
te:
=20
> Hi,=20
>=20
> First, in order to understand the reason for bootstrap failures, please a=
ttach engine.log (ovirt-engine) and node logs (under /tmp/vds_bootstrap.log,=
vds_installer.log).
>=20
> Second, what you describe regarding the loss of network could derive from=
the
following reasons:
> - host is configured with bonding - but bonding is not configured
correct=
ly.
> - NetworkManager interfere with networking config.
> - bridge (ovirtmgmt) is not set to with any BOOTPROTO or ONBOOT.
>=20
> Please attach network scripts (ifcfg-eth0, ifcfg-ovirtmgmt) and /var/log/=
messages .
>=20
=20
Hi,
I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think ONBOOT was=
probably not there.
BTW, before i attach any files here, is there a way to remove the
host and=
re-discover it afresh ?=20
ovirt web gui does not give me any option to remove.. the Remove is
diable=
d and host is in Non Responsive state.
How do i remove and start from scratch and then i can try to see if i
can f=
ix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to remove the host.
Please move host to maintenance, under 'general' tab, you will find re-insta=
ll option, or slightly remove the host and add it again.
Please make sure to delete ovirtmgmt bridge before the re-install phase.
--Apple-Mail-6FEA0081-096F-43B7-982A-2A0C8455E896
Content-Transfer-Encoding: 7bit
Content-Type: text/html;
charset=utf-8
<html><head></head><body
bgcolor="#FFFFFF"><div><br><br></div><div><br>On
Jan 28, 2012, at 11:45, Deepak C Shetty <<a
href="mailto:deepakcs@linux.vnet.ibm.com">deepakcs@linux.vnet.ibm.com</a>>
wrote:<br><br></div><div></div><blockquote
type="cite"><div>
<meta content="text/html; charset=UTF-8"
http-equiv="Content-Type">
<br>
<blockquote cite="mid:E548E5C8-2D77-4E58-950D-26DE58B1F8F2@redhat.com"
type="cite">
<div style="text-align: left; direction:
ltr;">Hi, </div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">First, in order to
understand the reason for bootstrap failures, please attach
engine.log (ovirt-engine) and node logs (under
/tmp/vds_bootstrap.log, vds_installer.log).</div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">Second, what you
describe regarding the loss of network could derive from the
following reasons:</div>
<div style="text-align: left; direction: ltr;">- host is
configured with bonding - but bonding is not configured
correctly.</div>
<div style="text-align: left; direction: ltr;">- NetworkManager
interfere with networking config.</div>
<div style="text-align: left; direction: ltr;">- bridge
(ovirtmgmt) is not set to with any BOOTPROTO or ONBOOT.</div>
<div style="text-align: left; direction: ltr;"><br>
</div>
<div style="text-align: left; direction: ltr;">Please attach
network scripts (ifcfg-eth0, ifcfg-ovirtmgmt) and
/var/log/messages .</div>
<br>
</blockquote>
<br>
<tt>Hi,<br>
I forgot to backup the ifcfg-eth0 for ovirtmgmt but i
think
ONBOOT was probably not there.<br>
BTW, before i attach any files here, is there a way to remove the
host and re-discover it afresh ? <br>
ovirt web gui does not give me any option to remove.. the Remove
is diabled and host is in Non Responsive state.<br>
How do i remove and start from scratch and then i can try to see
if i can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to
remove the host.<br>
</tt>
</div></blockquote><br><div>Please move host to maintenance, under
'general' tab, you will find re-install option, or slightly remove the host and
add it again.</div><div>Please make sure to delete ovirtmgmt bridge before the
re-install phase.</div><div><br></div></body></html>
--Apple-Mail-6FEA0081-096F-43B7-982A-2A0C8455E896--
11:23 p.m.
On 01/28/2012 03:24 PM, Haim Ateya wrote:
> Hi,
> I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think
> ONBOOT was probably not there.
> BTW, before i attach any files here, is there a way to remove the
> host and re-discover it afresh ?
> ovirt web gui does not give me any option to remove.. the Remove is
> diabled and host is in Non Responsive state.
> How do i remove and start from scratch and then i can try to see if i
> can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to remove
> the host.
Please move host to maintenance, under 'general' tab, you will find
re-install option, or slightly remove the host and add it again.
Please make sure to delete ovirtmgmt bridge before the re-install phase.
Host cannot be moved to Maintenance mode, since there is no network
connectivity between ovirt and host (due to the above issues).. ovirt
tries to put the host into maint mode, but does not and reverts the
status back to non responsive, because of this I am never ever able to
delete the host.. i think this is a bug because such issues will be common
in user environments & there should be a way for the user to delete the
host and start afresh irrespective of the
host status.. any reason why Remove is disabled when host is in non
responsive state ?
12:59 a.m.
On 01/31/2012 07:23 AM, Deepak C Shetty wrote:
On 01/28/2012 03:24 PM, Haim Ateya wrote:
>
>> Hi,
>> I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think
>> ONBOOT was probably not there.
>> BTW, before i attach any files here, is there a way to remove the
>> host and re-discover it afresh ?
>> ovirt web gui does not give me any option to remove.. the Remove is
>> diabled and host is in Non Responsive state.
>> How do i remove and start from scratch and then i can try to see if
>> i can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to remove
>> the host.
>
> Please move host to maintenance, under 'general' tab, you will find
> re-install option, or slightly remove the host and add it again.
> Please make sure to delete ovirtmgmt bridge before the re-install phase.
>
Host cannot be moved to Maintenance mode, since there is no network
connectivity between ovirt and host (due to the above issues).. ovirt
tries to put the host into maint mode, but does not and reverts the
status back to non responsive, because of this I am never ever able to
delete the host.. i think this is a bug because such issues will be
common
in user environments & there should be a way for the user to delete
the host and start afresh irrespective of the
host status.. any reason why Remove is disabled when host is in non
responsive state ?
not being able to move the host to maintenance sounds like a bug indeed,
can you please attach engine logs to the bug.
for the network issue- i would have looked at
https://bugzilla.redhat.com/show_bug.cgi?id=785557 as well, to see this
isn't your problem.
Moran.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
5:07 a.m.
On 01/31/2012 12:29 PM, Moran Goldboim wrote:
On 01/31/2012 07:23 AM, Deepak C Shetty wrote:
>
> Host cannot be moved to Maintenance mode, since there is no network
> connectivity between ovirt and host (due to the above issues).. ovirt
> tries to put the host into maint mode, but does not and reverts the
> status back to non responsive, because of this I am never ever able
> to delete the host.. i think this is a bug because such issues will
> be common
> in user environments & there should be a way for the user to delete
> the host and start afresh irrespective of the
> host status.. any reason why Remove is disabled when host is in non
> responsive state ?
>
not being able to move the host to maintenance sounds like a bug
indeed, can you please attach engine logs to the bug.
for the network issue- i would have looked at
https://bugzilla.redhat.com/show_bug.cgi?id=785557 as well, to see
this isn't your problem.
Moran.
Where are the engine logs, in /tmp, i tried to look but could not find.
6:09 a.m.
On 01/31/2012 01:07 PM, Deepak C Shetty wrote:
On 01/31/2012 12:29 PM, Moran Goldboim wrote:
> On 01/31/2012 07:23 AM, Deepak C Shetty wrote:
>>
>> Host cannot be moved to Maintenance mode, since there is no network
>> connectivity between ovirt and host (due to the above issues)..
>> ovirt tries to put the host into maint mode, but does not and
>> reverts the status back to non responsive, because of this I am
>> never ever able to delete the host.. i think this is a bug because
>> such issues will be common
>> in user environments & there should be a way for the user to delete
>> the host and start afresh irrespective of the
>> host status.. any reason why Remove is disabled when host is in non
>> responsive state ?
>>
> not being able to move the host to maintenance sounds like a bug
> indeed, can you please attach engine logs to the bug.
> for the network issue- i would have looked at
> https://bugzilla.redhat.com/show_bug.cgi?id=785557 as well, to see
> this isn't your problem.
> Moran.
Where are the engine logs, in /tmp, i tried to look but could not find.
you can find the engine logs at : /var/log/ovirt-engine/
the log needed for that matter is engine.log (latest), you can also use
the engine-log-collector tool installed.
Moran.
1:37 a.m.
On 01/31/2012 07:23 AM, Deepak C Shetty wrote:
On 01/28/2012 03:24 PM, Haim Ateya wrote:
>
>> Hi,
>> I forgot to backup the ifcfg-eth0 for ovirtmgmt but i think ONBOOT
>> was probably not there.
>> BTW, before i attach any files here, is there a way to remove the
>> host and re-discover it afresh ?
>> ovirt web gui does not give me any option to remove.. the Remove is
>> diabled and host is in Non Responsive state.
>> How do i remove and start from scratch and then i can try to see if i
>> can fix ifcfg-eth0 for ovirtmgmt ? Currently i am unable to remove
>> the host.
>
> Please move host to maintenance, under 'general' tab, you will find
> re-install option, or slightly remove the host and add it again.
> Please make sure to delete ovirtmgmt bridge before the re-install phase.
>
Host cannot be moved to Maintenance mode, since there is no network
connectivity between ovirt and host (due to the above issues).. ovirt
tries to put the host into maint mode, but does not and reverts the
status back to non responsive, because of this I am never ever able to
delete the host.. i think this is a bug because such issues will be common
in user environments & there should be a way for the user to delete the
host and start afresh irrespective of the
host status.. any reason why Remove is disabled when host is in non
responsive state ?
is the host the SPM or running any VMs?
you should be able to fence it via power management, or just right click
and "confirm manual shutdown" so engine will know it is not consuming
these resources any more.
5:11 a.m.
is the host the SPM or running any VMs?
you should be able to fence it via power management, or just right
click and "confirm manual shutdown" so engine will know it is not
consuming these resources any more.
No, the host is not running in VMs. I am not sure how to look for spm in
the host. In fact right now
even vdsm i dont see it under ps output. I did not configure power mgmt,
since for the same host i had
tried configuring pwrmgmt and ovirt gave some error, so when i tried
afresh, i did not check pwrmgmt.
I don't see confirm manual shutdown option, when i right click the host.
I see Confirm reboot.... i say yes and ok, but it still goes back to non
responsive state.
Do i need to open a BZ for reporting this issue, or I can start by
attaching logs here in the mail ?
6 a.m.
On 01/31/2012 01:11 PM, Deepak C Shetty wrote:
> is the host the SPM or running any VMs?
> you should be able to fence it via power management, or just right
> click and "confirm manual shutdown" so engine will know it is not
> consuming these resources any more.
>
>
No, the host is not running in VMs. I am not sure how to look for spm in
the host. In fact right now
even vdsm i dont see it under ps output. I did not configure power mgmt,
since for the same host i had
tried configuring pwrmgmt and ovirt gave some error, so when i tried
afresh, i did not check pwrmgmt.
SPM is the last column in the hosts main tab.
I don't see confirm manual shutdown option, when i right click the host.
I see Confirm reboot.... i say yes and ok, but it still goes back to non
responsive state.
Do i need to open a BZ for reporting this issue, or I can start by
attaching logs here in the mail ?
i suspect a bug will be more productive, but doing a few rounds with log
excerpts is valid as well.
8:55 a.m.
Hi Itamar,
My reply with the attachments is on hold since the size is around 114KB
I tried with and without .tar, the same happens, so not sure how to send
the attachments
otherwise to this email thread.
9:09 a.m.
On 01/31/2012 04:55 PM, Deepak C Shetty wrote:
Hi Itamar,
My reply with the attachments is on hold since the size is around 114KB
I tried with and without .tar, the same happens, so not sure how to send
the attachments
otherwise to this email thread.
1. i got it, since you cc'd me directly.
2. karsten - can we change the limit on users(a)ovirt.org to something in MBs?
thanks
9:30 a.m.
On 01/31/2012 05:09 PM, Itamar Heim wrote:
On 01/31/2012 04:55 PM, Deepak C Shetty wrote:
> Hi Itamar,
> My reply with the attachments is on hold since the size is around 114KB
> I tried with and without .tar, the same happens, so not sure how to send
> the attachments
> otherwise to this email thread.
>
1. i got it, since you cc'd me directly.
2. karsten - can we change the limit on users(a)ovirt.org to something
in MBs?
thanks
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Deepak, can you please look for SetVdsStatusVDSCommand following a
MaintananceVdsCommand in /var/log/ovirt-engine/engine.log
if you were having a problem with this command it is most likely for an
ERROR to appear around there.
Moran.
4:02 p.m.
On 01/31/2012 09:55 AM, Deepak C Shetty wrote:
Hi Itamar,
My reply with the attachments is on hold since the size is around
114KB
I tried with and without .tar, the same happens, so not sure how to
send the attachments
otherwise to this email thread.
___________
Either attach them to the wiki, and then link the page. just specify the
id you want and someone can create you an account. Or the other option
is to attach them to a BZ.
The reason we moderate attachments to the list is to not spam all users
with attachments. :-)
Carl.
4:14 p.m.
On 02/01/2012 12:02 AM, Carl Trieloff wrote:
On 01/31/2012 09:55 AM, Deepak C Shetty wrote:
> Hi Itamar,
> My reply with the attachments is on hold since the size is around
> 114KB
> I tried with and without .tar, the same happens, so not sure how to
> send the attachments
> otherwise to this email thread.
>
> ___________
Either attach them to the wiki, and then link the page. just specify the
id you want and someone can create you an account. Or the other option
is to attach them to a BZ.
The reason we moderate attachments to the list is to not spam all users
with attachments. :-)
what is the current limit?
114KB means even a screen shot won't pass through.
4:20 p.m.
Last time I tried to send an attachment I found the limit to be 40KB.
- Chris
-----Original Message-----
From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf
Of Carl Trieloff
Sent: Tuesday, January 31, 2012 4:14 PM
To: Itamar Heim
Cc: users(a)ovirt.org
Subject: Re: [Users] Host discovery failing due to host network being
lost
On 01/31/2012 05:14 PM, Itamar Heim wrote:
what is the current limit?
114KB means even a screen shot won't pass through.
Don't know who all is admin on user list to look -- Karsten?
Carl.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
5 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 01/31/2012 02:20 PM, Brown, Chris (GE Healthcare) wrote:
Last time I tried to send an attachment I found the limit to be
40KB.
Yes, that is the default. I just upped it to 5000KB. Hopefully that
won't be a problem for anyone, and we should consider alternate ways
to share files than this list if we find we need to regularly. (I
think 100+KB log files are fine for the list, fwiw.)
BTW, if anyone is interested in helping administrate this list, I'm
always looking to spread the responsibility. If you haven't admin'd a
Mailman list before, this is a good opportunity to learn.
- - Karsten
-----Original Message----- From: users-bounces(a)ovirt.org
[mailto:users-bounces@ovirt.org] On Behalf Of Carl Trieloff Sent:
Tuesday, January 31, 2012 4:14 PM To: Itamar Heim Cc:
users(a)ovirt.org Subject: Re: [Users] Host discovery failing due to
host network being lost
On 01/31/2012 05:14 PM, Itamar Heim wrote:
> what is the current limit? 114KB means even a screen shot won't
> pass through.
Don't know who all is admin on user list to look -- Karsten?
Carl. _______________________________________________ Users mailing
list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list
Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users
- --
name: Karsten 'quaid' Wade, Sr. Community Architect
team: Red Hat Community Architecture & Leadership
uri: http://communityleadershipteam.org
http://TheOpenSourceWay.org
gpg: AD0E0C41
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iD8DBQFPKHKU2ZIOBq0ODEERAo+RAJ0TyklGtReMXQDHpHfYpx8eSeYkMgCgwCyT
104W6iWjhZKiVW3u7WpHiJM=
=7bVI
-----END PGP SIGNATURE-----
4468
days inactive
4471
days old
18 comments
7 participants
participants (7)
-
Brown, Chris (GE Healthcare) -
Carl Trieloff -
Deepak C Shetty -
Haim Ateya -
Itamar Heim -
Karsten 'quaid' Wade -
Moran Goldboim