4:23 p.m.
On 23/11/17 06:46, Maton, Brett wrote:
Might not be quite what you're after but adding
# RHEV PRIVATE
To /etc/multipath.conf will stop vdsm from changing the file.
|||
Hi there. Thanks for the reply.
Yes I am aware of that and it seems that's what I will have to do.
I have no problem with VDSM managing the file, I just wish it didn't
automatically load local storage devices into multipathd.
I'm still not clear on the purpose of this automatic management though.
From what I can tell there is no difference to hosts/clusters made
through this automatic management - i.e. you still have to add storage
domains manually in oVirt.
Could anyone give any info on the purpose of this auto-management of
local storage devices into multipathd in VDSM?
Then I will be able to make an informed decision as to the benefit of
letting it continue.
Thanks, Ben
On 22 November 2017 at 22:42, Ben Bradley <listsbb(a)virtx.net
<mailto:listsbb@virtx.net>> wrote:
Hi All
I have been running ovirt in a lab environment on CentOS 7 for
several months but have only just got around to really testing things.
I understand that VDSM manages multipath.conf and I understand that
I can make changes to that file and set it to private to prevent
VDSM making further changes.
I don't mind VDSM managing the file but is it possible to set to
prevent local devices being automatically added to multipathd?
Many times I have had to flush local devices from multipath when
they are added/removed or re-partitioned or the system is rebooted.
It doesn't even look like oVirt does anything with these devices
once they are setup in multipathd.
I'm assuming it's the VDSM additions to multipath that are causing
this. Can anyone else confirm this?
Is there a way to prevent new or local devices being added
automatically?
Regards
Ben
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
6:39 a.m.
New subject: VDSM multipath.conf - prevent automatic management of local devices
On Tue, Nov 28, 2017 at 12:25 AM Ben Bradley <listsbb(a)virtx.net> wrote:
On 23/11/17 06:46, Maton, Brett wrote:
> Might not be quite what you're after but adding
>
> # RHEV PRIVATE
>
> To /etc/multipath.conf will stop vdsm from changing the file.
> |||
Hi there. Thanks for the reply.
Yes I am aware of that and it seems that's what I will have to do.
I have no problem with VDSM managing the file, I just wish it didn't
automatically load local storage devices into multipathd.
We don't load anything, this is multipathd default behavior.
We cannot blacklist local devices since we don't know which devices
are local, this is something the administrator of the machine should handle.
In RHEL/CentOS 7.5 we will have a good way to blacklist most local devices,
see https://bugzilla.redhat.com/show_bug.cgi?id=1456955#c0
Once this is available, your multipath.conf will be upgrade to use the
new feature when you upgrade vdsm.
I'm still not clear on the purpose of this automatic management though.
From what I can tell there is no difference to hosts/clusters made
through this automatic management - i.e. you still have to add storage
domains manually in oVirt.
The purpose of this configuration is to allow Vdsm to manage shared
storage - we require certain configuration.
In 4.2 we documented every setting in multipath.conf, please see
https://github.com/oVirt/vdsm/blob/913c2e202de718ec828b240642e37e059a86da...
to understand why we require each value.
If the default multiapth.conf does not work for you, you can make the file
private, and then you are responsible for using new features provided
by multipath, we will never touch the file.
You can also file a bug if you think the default configuration can be
improved to support some use case.
Nir
Could anyone give any info on the purpose of this auto-management of
local storage devices into multipathd in VDSM?
Then I will be able to make an informed decision as to the benefit of
letting it continue.
Thanks, Ben
>
> On 22 November 2017 at 22:42, Ben Bradley <listsbb(a)virtx.net
> <mailto:listsbb@virtx.net>> wrote:
>
> Hi All
>
> I have been running ovirt in a lab environment on CentOS 7 for
> several months but have only just got around to really testing
things.
> I understand that VDSM manages multipath.conf and I understand that
> I can make changes to that file and set it to private to prevent
> VDSM making further changes.
>
> I don't mind VDSM managing the file but is it possible to set to
> prevent local devices being automatically added to multipathd?
>
> Many times I have had to flush local devices from multipath when
> they are added/removed or re-partitioned or the system is rebooted.
> It doesn't even look like oVirt does anything with these devices
> once they are setup in multipathd.
>
> I'm assuming it's the VDSM additions to multipath that are causing
> this. Can anyone else confirm this?
>
> Is there a way to prevent new or local devices being added
> automatically?
>
> Regards
> Ben
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.ovirt.org/mailman/listinfo/users>
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2341
days inactive
2350
days old
1 comments
2 participants
participants (2)
-
Ben Bradley -
Nir Soffer