Trying to deploy a 3 Node Hyperconverged Ovirt Cluster with Gluster as the backend storage. I have tried this against the three nodes that I have as well as with just a single node to get a working base line. The failure that I keep getting stuck on is: TASK [gluster.infra/roles/backend_setup : Create volume groups] **************** task path: /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vg_create.yml:59 failed: [ovirt01-storage.poling.local] (item={'key': 'gluster_vg_sdb', 'value': [{'vgname': 'gluster_vg_sdb', 'pvname': '/dev/sdb'}]}) => {"ansible_loop_var": "item", "changed": false, "err": " Device /dev/sdb excluded by a filter.\n", "item": {"key": "gluster_vg_sdb", "value": [{"pvname": "/dev/sdb", "vgname": "gluster_vg_sdb"}]}, "msg": "Creating physical volume '/dev/sdb' failed", "rc": 5} I have verified my dns records and have reverse dns set up. The Front End Network and Storage Networks are physical separated and are 10GB connections. In the reading i have done this seems to point to possibly being a multipath issue, but i do see multipath configs being set in the Gluster Wizard and when I check after the wizard fails out - it does look like the mpath is set correctly. [root@ovirt01 ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 446.1G 0 disk ├─sda1 8:1 0 1G 0 part /boot └─sda2 8:2 0 445.1G 0 part ├─onn-pool00_tmeta 253:0 0 1G 0 lvm │ └─onn-pool00-tpool 253:2 0 351.7G 0 lvm │ ├─onn-ovirt--node--ng--4.4.3--0.20201110.0+1 253:3 0 314.7G 0 lvm / │ ├─onn-pool00 253:5 0 351.7G 1 lvm │ ├─onn-var_log_audit 253:6 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:7 0 8G 0 lvm /var/log │ ├─onn-var_crash 253:8 0 10G 0 lvm /var/crash │ ├─onn-var 253:9 0 15G 0 lvm /var │ ├─onn-tmp 253:10 0 1G 0 lvm /tmp │ ├─onn-home 253:11 0 1G 0 lvm /home │ └─onn-ovirt--node--ng--4.4.2--0.20200918.0+1 253:12 0 314.7G 0 lvm ├─onn-pool00_tdata 253:1 0 351.7G 0 lvm │ └─onn-pool00-tpool 253:2 0 351.7G 0 lvm │ ├─onn-ovirt--node--ng--4.4.3--0.20201110.0+1 253:3 0 314.7G 0 lvm / │ ├─onn-pool00 253:5 0 351.7G 1 lvm │ ├─onn-var_log_audit 253:6 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:7 0 8G 0 lvm /var/log │ ├─onn-var_crash 253:8 0 10G 0 lvm /var/crash │ ├─onn-var 253:9 0 15G 0 lvm /var │ ├─onn-tmp 253:10 0 1G 0 lvm /tmp │ ├─onn-home 253:11 0 1G 0 lvm /home │ └─onn-ovirt--node--ng--4.4.2--0.20200918.0+1 253:12 0 314.7G 0 lvm └─onn-swap 253:4 0 4G 0 lvm [SWAP] sdb 8:16 0 5.5T 0 disk └─sdb1 8:17 0 5.5T 0 part /sdb Looking for any pointers on what else I should be looking at to get gluster to deploy successfully. Thanks ~ R _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5DB2ENDLVT7...