Morning All, I have oVirt 3.1 running on an F17 installation(All In One). When on the same network as the said server, via webadmin, I can open the console to VM's setup to use Spice. However, when I come in from the outside via an ADSL router no joy. Please note, I use my same laptop each time. I have the following setup : Port 22 -> Port 22 (oVirt Server) Works Port 80 -> Port 80 (oVirt Server) Works Port 443 -> Port 443 (oVirt Server) Works Ports 5900 - 5910 -> Ports 5900 - 5910 (oVirt Server) ??? I have run : [root@ovirt ~]# vdsClient -s 0 list | grep displayPort displayPort = 5900 [root@ovirt ~]# Hence the port forward range. All I get is a window opening, cursor becomes an X and after about 30 seconds it closes. Any help would be much appreciated. Regards Shaun
On 11/13/2012 07:56 AM, Shaun Glass wrote:
Morning All,
I have oVirt 3.1 running on an F17 installation(All In One). When on the same network as the said server, via webadmin, I can open the console to VM's setup to use Spice.
However, when I come in from the outside via an ADSL router no joy. Please note, I use my same laptop each time. I have the following setup :
Port 22 -> Port 22 (oVirt Server) Works Port 80 -> Port 80 (oVirt Server) Works Port 443 -> Port 443 (oVirt Server) Works Ports 5900 - 5910 -> Ports 5900 - 5910 (oVirt Server) ???
spice talks directly to the host, not to engine, so you need to fix your mappings per host. there is some work on a spice squid proxy which would tunnel such requests and would solve this problem for you.
I have run :
[root@ovirt ~]# vdsClient -s 0 list | grep displayPort displayPort = 5900 [root@ovirt ~]#
Hence the port forward range. All I get is a window opening, cursor becomes an X and after about 30 seconds it closes.
Any help would be much appreciated.
Regards
Shaun
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Thanks ... will try that. On Tue, Nov 13, 2012 at 8:24 AM, Itamar Heim <iheim@redhat.com> wrote:
On 11/13/2012 07:56 AM, Shaun Glass wrote:
Morning All,
I have oVirt 3.1 running on an F17 installation(All In One). When on the same network as the said server, via webadmin, I can open the console to VM's setup to use Spice.
However, when I come in from the outside via an ADSL router no joy. Please note, I use my same laptop each time. I have the following setup :
Port 22 -> Port 22 (oVirt Server) Works Port 80 -> Port 80 (oVirt Server) Works Port 443 -> Port 443 (oVirt Server) Works Ports 5900 - 5910 -> Ports 5900 - 5910 (oVirt Server) ???
spice talks directly to the host, not to engine, so you need to fix your mappings per host. there is some work on a spice squid proxy which would tunnel such requests and would solve this problem for you.
I have run :
[root@ovirt ~]# vdsClient -s 0 list | grep displayPort displayPort = 5900 [root@ovirt ~]#
Hence the port forward range. All I get is a window opening, cursor becomes an X and after about 30 seconds it closes.
Any help would be much appreciated.
Regards
Shaun
______________________________**_________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
participants (2)
-
Itamar Heim -
Shaun Glass