Problem on installing ovirtengine and ovirtnode

5 Nov 2017

      ------=_Part_2627496_1691162795.1509895684749
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Hi all,

I followed below document to install ovirtengine and ovirtnode on CentOS 7 =
gnome desktop which is a VM on KVM.

How to install and configure oVirt 4.0 on CentOS 7 / RHEL 7
https://www.linuxtechi.com/install-configure-ovirt-4-0-on-centos7-rhel7/

Installation went through without problem.=C2=A0 After finish on local brow=
ser running; http://ovirtengin.example.com I can't connect "oVirt OPEN VIRT=
UALIZATION MANAGER"
I don't understand the use of adding;
192.168.1.30=C2=A0 ovirtengine.example.com
192.168.1.40=C2=A0 ovirtnode.example.com

to /etc/hosts ???

The internal network is 192.168.8.0/24

However on local browser running 192.168.8.8 (the local IP of CentOS 7) I c=
an connect "oVirt OPEN VIRTUALIZATION MANAGER"

There is a warning: "ovirtengine.example.com: Name or service not known"

For remote browser (Host) to connect "oVirt OPEN VIRTUALIZATION MANAGER" I =
must stop the firewall of CentOS 7 running;
# systemctl stop firewalld

before running 192.168.8.8 (the local IP of CentOS 7)

Please advise what I can do about the domain "ovirtengine.example.com" and =
"ovirtnode.example.com"

What is the use adding following 2 lines on /etc/hosts
192.168.1.30=C2=A0 ovirtengine.example.com
192.168.1.40=C2=A0 ovirtnode.example.com

Thanks in advance.

Regards
SL

------=_Part_2627496_1691162795.1509895684749
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

<html><head></head><body><div style=3D"font-family:Helvetica Neue, Helvetic=
a, Arial, sans-serif;font-size:16px;"><div>Hi all,<br><br>I followed below =
document to install ovirtengine and ovirtnode on CentOS 7 gnome desktop whi=
ch is a VM on KVM.<br><br>How to install and configure oVirt 4.0 on CentOS =
7 / RHEL 7<br>https://www.linuxtechi.com/install-configure-ovirt-4-0-on-cen=
tos7-rhel7/<br><br><div>Installation went through without problem.  Af=
ter finish on local browser running; http://ovirtengin.example.com </div><d=
iv>I can't connect "oVirt OPEN VIRTUALIZATION MANAGER"</div><br>I don't und=
erstand the use of adding;<br>192.168.1.30  ovirtengine.example.com<br=
...
192.168.1.40  ovirtnode.example.com<br><br>to /etc/hosts ???<br><br>T=
he internal network is 192.168.8.0/24<br><br>However on local browser runni=
ng 192.168.8.8 (the local IP of CentOS 7) I can connect "oVirt OPEN VIRTUAL=
IZATION MANAGER"<br><br>There is a warning: "ovirtengine.example.com: Name =
or service not known"<br><br>For remote browser (Host) to connect "oVirt OP=
EN VIRTUALIZATION MANAGER" I must stop the firewall of CentOS 7 running;<br=
# systemctl stop firewalld<br><br>before running 192.168.8.8 (the local IP=
 of CentOS 7)<br><br>Please advise what I can do about the domain "ovirteng=
ine.example.com" and "ovirtnode.example.com"<br><br>What is the use adding =
following 2 lines on /etc/hosts<br>192.168.1.30  ovirtengine.example.c=
om<br>192.168.1.40  ovirtnode.example.com<br><br>Thanks in advance.<br=
<br>Regards<br>SL<br><br><br></div></div></body></html>
------=_Part_2627496_1691162795.1509895684749--

Stephen Liu

tags

participants (1)