5:23 a.m.
Hi,
I’m running oVirt 4.4.4.7-1.el8 and need to connect one of the VMs straight to the ISP
link via Ethernet cable.
oVirt already have 2 networks (ovirt mgmt local + DMZ).
Created new network provider and assigned to it available physical interface of HP
ProLiant, connected via cable to ISP switch with public IP.
Options of this network: (VM Network = on, Port Isolation = off, NIC Type = VirtIO, the
rest are defaults).
VM is Debian 10.
Link works but with strange artefacts. If VM left being idle for a while, it cant be
connected or pinged from outside, until I initiate pings from VM itself.
I have only 2 IPs from this ISP so I’m sure there are no IP address conflicts.
Another port and public IP go to our VyOS router handling internal and DMZ zone.
How to fix this problem ?
Thanks in advance.
Andrei
6:10 a.m.
On Tue, Mar 9, 2021 at 12:35 PM Andrei Verovski <andreil1(a)starlett.lv>
wrote:
Hi,
Hi,
I’m running oVirt 4.4.4.7-1.el8 and need to connect one of the VMs
straight to the ISP link via Ethernet cable.
oVirt already have 2 networks (ovirt mgmt local + DMZ).
Created new network provider and assigned to it available physical
interface of HP ProLiant, connected via cable to ISP switch with public IP.
By provider do you mean ovirt-provider-ovn? If so are you using OVS cluster
type? The physical interface connection for external networks work only
in an OVS switch type cluster.
Options of this network: (VM Network = on, Port Isolation = off, NIC
Type
= VirtIO, the rest are defaults).
VM is Debian 10.
Link works but with strange artefacts. If VM left being idle for a while,
it cant be connected or pinged from outside, until I initiate pings from VM
itself.
I have only 2 IPs from this ISP so I’m sure there are no IP address
conflicts.
Another port and public IP go to our VyOS router handling internal and DMZ
zone.
When this happens I would suggest to trace where the packets are getting
dropped.
How to fix this problem ?
Thanks in advance.
Andrei
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5SAC77DSZQ4...
Thank you.
Best regards,
Ales
--
Ales Musil
Software Engineer - RHV Network
Red Hat EMEA <https://www.redhat.com>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
7:54 a.m.
New subject: Strange Glitches with VM and Network (oVirt 4.4.4.7-1.el8)
I’m running oVirt 4.4.4.7-1.el8 and need to connect one of the VMs straight to the ISP
link via Ethernet cable.
oVirt already have 2 networks (ovirt mgmt local + DMZ).
Created new network provider and assigned to it available physical interface of HP
ProLiant, connected via cable to ISP switch with public IP.
By provider do you mean ovirt-provider-ovn? If so are you using OVS cluster type? The
physical interface connection for external networks work only
in an OVS switch type cluster.
If you mean Native Open vSwitch as described here we don’t use it.
https://www.ovirt.org/develop/release-management/features/network/openvsw...
Current setup is simple 2-node and unfortunately I'm not aware of all deep details of
oVirt networking.
Since oVirt uses KVM as underlying technology I assume it uses bridged networking to
connect VMs and physical interfaces.
Each our server uses 2 Ethernet connections, 1 for internal LAN 192.168.0.xxx and 2nd for
DMZ 192.168.1.xxx.
If so I assumed that it could not be a problem to bridge VM to external IP via 3rd
Ethernet using oVirt networking.
May be its enough to turn on “isolated port” and VM Interface Profile to “clean-traffic”?
Please correct if I'm wrong here
Options of this network: (VM Network = on, Port Isolation = off, NIC Type = VirtIO, the
rest are defaults).
VM is Debian 10.
Link works but with strange artefacts. If VM left being idle for a while, it cant be
connected or pinged from outside, until I initiate pings from VM itself.
I have only 2 IPs from this ISP so I’m sure there are no IP address conflicts.
Another port and public IP go to our VyOS router handling internal and DMZ zone.
When this happens I would suggest to trace where the packets are getting dropped.
How to fix this problem ?
Thanks in advance.
Andrei
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org
<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
<https://www.ovirt.org/privacy-policy.html>
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
<https://www.ovirt.org/community/about/community-guidelines/>
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5SAC77DSZQ4...
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/5SAC77DSZQ4...
Thank you.
Best regards,
Ales
--
Ales Musil
Software Engineer - RHV Network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com <mailto:amusil@redhat.com> IM: amusil
<https://red.ht/sig>
12:23 a.m.
On Tue, Mar 9, 2021 at 2:54 PM Andrei Verovski <andreil1(a)starlett.lv> wrote:
> I’m running oVirt 4.4.4.7-1.el8 and need to connect one of the VMs
> straight to the ISP link via Ethernet cable.
> oVirt already have 2 networks (ovirt mgmt local + DMZ).
> Created new network provider and assigned to it available physical
> interface of HP ProLiant, connected via cable to ISP switch with public IP.
>
By provider do you mean ovirt-provider-ovn? If so are you using OVS
cluster type? The physical interface connection for external networks work
only
in an OVS switch type cluster.
If you mean Native Open vSwitch as described here we don’t use it.
https://www.ovirt.org/develop/release-management/features/network/openvsw...
Current setup is simple 2-node and unfortunately I'm not aware of
all deep
details of oVirt networking.
Since oVirt uses KVM as underlying technology I assume it uses bridged
networking to connect VMs and physical interfaces.
Correct, every network in Linux Bridge switch type cluster is created as a
bridge on host when marked as VM network.
Non-VM networks are bridgeless.
Each our server uses 2 Ethernet connections, 1 for internal LAN
192.168.0.xxx and 2nd for DMZ 192.168.1.xxx.
If so I assumed that it could not be a problem to bridge VM to external IP
via 3rd Ethernet using oVirt networking.
It should not because if the interface is really directly connected to an
external network, the bridge provides the needed L2 connection.
May be its enough to turn on “isolated port” and VM Interface Profile
to
“clean-traffic”?
Actually quite the opposite, if there are any troubles like that I would
suggest to have Port Isolation turned off
and no network filter.
Best regards,
Ales
Please correct if I'm wrong here
> Options of this network: (VM Network = on, Port Isolation = off, NIC Type
> = VirtIO, the rest are defaults).
> VM is Debian 10.
>
> Link works but with strange artefacts. If VM left being idle for a while,
> it cant be connected or pinged from outside, until I initiate pings from VM
> itself.
> I have only 2 IPs from this ISP so I’m sure there are no IP address
> conflicts.
> Another port and public IP go to our VyOS router handling internal and
> DMZ zone.
>
When this happens I would suggest to trace where the packets are getting
dropped.
>
> How to fix this problem ?
> Thanks in advance.
> Andrei
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5SAC77DSZQ4...
>
Thank you.
Best regards,
Ales
--
Ales Musil
Software Engineer - RHV Network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
--
Ales Musil
Software Engineer - RHV Network
Red Hat EMEA <https://www.redhat.com>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
1149
days inactive
1150
days old
3 comments
2 participants
participants (2)
-
Ales Musil -
Andrei Verovski