2:03 a.m.
Anyone had luck using a GRID K2 for vGPU pass-through?
I can't seem to install the driver (367.128-370.28)
7:15 a.m.
If you don't post the entire log with error is quite difficult to help.
Luca
Il gio 27 set 2018, 13:11 femi adegoke <ovirt(a)fateknollogee.com> ha scritto:
Still looking for answers!
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q4T7ITWFWGE...
7:22 a.m.
There is error to log.
Per nVidia instructions, I am trying to install a driver for GRID K2.
The driver is "NVIDIA-Linux-x86_64-367.128-grid.run"
I get an error message saying "I need to have the gcc-c++ package"
It is very possible that I am not doing this correctly.
7:31 a.m.
Il giorno gio 27 set 2018 alle ore 13:23 femi adegoke <
ovirt(a)fateknollogee.com> ha scritto:
There is error to log.
Per nVidia instructions, I am trying to install a driver for GRID K2.
The driver is "NVIDIA-Linux-x86_64-367.128-grid.run"
I get an error message saying "I need to have the gcc-c++ package"
It is very possible that I am not doing this correctly.
Try "yum install gcc-c++" and then try again.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PNLYXB6AX7M...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...
7:36 a.m.
I already tried "yum install gcc-c++"
Result is this:
# yum install gcc-c++
Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload,
product-id, search-disabled-repos, subscription-manager, vdsmupgrade
This system is not registered with an entitlement server. You can use subscription-manager
to register.
Loading mirror speeds from cached hostfile
* ovirt-4.2-epel: mirror.seas.harvard.edu
No package gcc-c++ available.
Error: Nothing to do
Uploading Enabled Repositories Report
Loaded plugins: fastestmirror, product-id, subscription-manager
This system is not registered with an entitlement server. You can use subscription-manager
to register.
Cannot upload enabled repos report, is this client registered?
7:46 a.m.
Il giorno gio 27 set 2018 alle ore 13:37 femi adegoke <
ovirt(a)fateknollogee.com> ha scritto:
I already tried "yum install gcc-c++"
Result is this:
# yum install gcc-c++
Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist,
package_upload, product-id, search-disabled-repos, subscription-manager,
vdsmupgrade
This system is not registered with an entitlement server. You can use
subscription-manager to register.
Loading mirror speeds from cached hostfile
* ovirt-4.2-epel: mirror.seas.harvard.edu
No package gcc-c++ available.
Are you on ovirt-node? If yes you'll need to enable centos repos from
/etc/yum.repos.d/
Error: Nothing to do
Uploading Enabled Repositories Report
Loaded plugins: fastestmirror, product-id, subscription-manager
This system is not registered with an entitlement server. You can use
subscription-manager to register.
Cannot upload enabled repos report, is this client registered?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3W76RMFEQ5Y...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...
7:55 a.m.
I was not sure if it was ok to enable repos when using oVirt node.
The question I still need an answer to is this: "Does GRID K2 work (compatible) in
oVirt?"
3:01 a.m.
Il giorno gio 27 set 2018 alle ore 14:01 femi adegoke <
ovirt(a)fateknollogee.com> ha scritto:
I was not sure if it was ok to enable repos when using oVirt node.
The question I still need an answer to is this: "Does GRID K2 work
(compatible) in oVirt?"
See this conversation about K2 on oVirt:
https://www.facebook.com/groups/ovirt.openvirtualization/permalink/113687...
If I understand correctly, K2 supports only 2 VMs but should work on oVirt.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZUNZ3OM2OBR...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...
3:06 a.m.
Thanks, I will take a look.
I'm guessing the newer generation of cards (P4/P40/V100) probably have better
performance.
On Sep 28 2018, at 12:01 am, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote:
Il giorno gio 27 set 2018 alle ore 14:01 femi adegoke <ovirt(a)fateknollogee.com
(mailto:ovirt@fateknollogee.com)> ha scritto:
> I was not sure if it was ok to enable repos when using oVirt node.
>
> The question I still need an answer to is this: "Does GRID K2 work (compatible)
in oVirt?"
See this conversation about K2 on oVirt:
https://www.facebook.com/groups/ovirt.openvirtualization/permalink/113687...
If I understand correctly, K2 supports only 2 VMs but should work on oVirt.
> _______________________________________________
> Users mailing list -- users(a)ovirt.org (mailto:users@ovirt.org)
> To unsubscribe send an email to users-leave(a)ovirt.org
(mailto:users-leave@ovirt.org)
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZUNZ3OM2OBR...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA (https://www.redhat.com/)
sbonazzo(a)redhat.com (mailto:sbonazzo@redhat.com)
3:45 a.m.
When I try yum install gcc-c++, I get this error message at the end.
Is it safe to continue trying to install gcc-c++?
Error: Package: libstdc++-devel-4.8.5-28.el7.x86_64 (base)
Requires: libstdc++(x86-64) = 4.8.5-28.el7
Installed: libstdc++-4.8.5-28.el7_5.1.x86_64 (installed)
libstdc++(x86-64) = 4.8.5-28.el7_5.1
Available: libstdc++-4.8.5-28.el7.x86_64 (base)
libstdc++(x86-64) = 4.8.5-28.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
4:13 a.m.
Il giorno ven 28 set 2018 alle ore 09:45 femi adegoke <
ovirt(a)fateknollogee.com> ha scritto:
When I try yum install gcc-c++, I get this error message at the end.
Is it safe to continue trying to install gcc-c++?
You should enable also the updattes repo. the version in base is older
thant the one included in oVirt Node
Error: Package: libstdc++-devel-4.8.5-28.el7.x86_64 (base)
Requires: libstdc++(x86-64) = 4.8.5-28.el7
Installed: libstdc++-4.8.5-28.el7_5.1.x86_64 (installed)
libstdc++(x86-64) = 4.8.5-28.el7_5.1
Available: libstdc++-4.8.5-28.el7.x86_64 (base)
libstdc++(x86-64) = 4.8.5-28.el7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BFDULLSWAPJ...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...
9:56 a.m.
After enabling the update repo, here is the new error:
ERROR: Unable to find the kernel source tree for the currently running kernel. Please
make sure you have installed the kernel source files for your kernel and that they are
properly configured; on Red Hat Linux systems, for
example, be sure you have the 'kernel-source' or 'kernel-devel'
RPM installed. If you know the correct kernel source files are installed, you may specify
the kernel source path with the '--kernel-source-path' command line
option.
9:59 a.m.
Il giorno ven 28 set 2018 alle ore 15:57 femi adegoke <
ovirt(a)fateknollogee.com> ha scritto:
After enabling the update repo, here is the new error:
ERROR: Unable to find the kernel source tree for the currently running
kernel. Please make sure you have installed the kernel source files for
your kernel and that they are properly configured; on Red Hat Linux
systems, for
example, be sure you have the 'kernel-source' or 'kernel-devel'
RPM installed. If you know the correct kernel source files are installed,
you may specify the kernel source path with the '--kernel-source-path'
command line
option.
I think you need to install kernel-devel and kernel-headers too
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AQMMLFTTZBX...
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
<https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=70...
10:03 a.m.
"kernel-headers-3.10.0-862.11.6.el7.x86_64" was already installed as part of
gcc-c++
10:08 a.m.
I installed kernel-devel, new error is:
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently
when this kernel module was built against the wrong or improperly configured kernel
sources, with a version of gcc that differs from the one used to
build the target kernel, or if a driver such as rivafb, nvidiafb, or nouveau is
present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA
graphics device(s), or no NVIDIA GPU installed in this
system is supported by this NVIDIA Linux graphics driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for more
information.
2280
days inactive
2283
days old
18 comments
3 participants
participants (3)
-
femi adegoke -
Luca 'remix_tj' Lorenzetto -
Sandro Bonazzola