Ovirt Hyperconverged Cluster
Hi all, I have configured a 3 nodes cluster with an Hyperconverged gluster. I have used 2 network interface bonded with one VLAN for the mgmt and an other one for the storage. When I use cockpit to deploy the hosted engine I receive this error. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, please check engine logs, fix accordingly and re-deploy.\n"} The ovirt version is 4.3 Someone have a similar problem?
On Wed, Jun 19, 2019 at 5:36 PM <raffaele@stefanile.com> wrote:
Hi all,
I have configured a 3 nodes cluster with an Hyperconverged gluster. I have used 2 network interface bonded with one VLAN for the mgmt and an other one for the storage.
When I use cockpit to deploy the hosted engine I receive this error.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, please check engine logs, fix accordingly and re-deploy.\n"}
Hi, Please check/share relevant logs - from the host /var/log/ovirt-hosted-engine-setup/* (and perhaps /var/log/vdsm/* and /var/log/ovirt-hosted-engine-ha/*) and from the engine (if you can access it) /var/log/ovirt-engine/engine.log . Thanks and best regards, -- Didi
Many thanks for your help https://drive.google.com/drive/folders/1HmKccGRAI0ggyuyZrQ2OA42G24-26bsx?usp...
Are you using the same interface for gluster and the ovirt engine? On Thursday, June 20, 2019, 08:53:57 AM PDT, raffaele@stefanile.com <raffaele@stefanile.com> wrote: Many thanks for your help https://drive.google.com/drive/folders/1HmKccGRAI0ggyuyZrQ2OA42G24-26bsx?usp... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/B2VRA7FUZCXXVW...
Yes, I am using the same two interface in bond configuration with one vlan for the storage and annoter one for the mgmt.
You issue is here: 2019-06-20 11:25:53,200+02 WARN [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2598128e] Validation of action 'HostSetupNetworks' failed for user admin@internal-authz. Reasons: VAR__ACTION__SETUP,VAR__TYPE__NETWORKS,INVALID_BOND_MODE_FOR_BOND_WITH_VM_NETWORK,$BondName bond0,$networkName ovirtmgmt Please use a valid bond mode for the bond selected on the management network (I'll try to understand why the setup tool didn't detected it before). On Wed, Jun 26, 2019 at 10:46 AM <raffaele@stefanile.com> wrote:
Yes, I am using the same two interface in bond configuration with one vlan for the storage and annoter one for the mgmt. _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/56UBS4RALC2QQ6...
-- Simone Tiraboschi He / Him / His Principal Software Engineer Red Hat <https://www.redhat.com/> stirabos@redhat.com @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit>
On Wed, Jun 26, 2019 at 10:58 AM Simone Tiraboschi <stirabos@redhat.com> wrote:
You issue is here: 2019-06-20 11:25:53,200+02 WARN [org.ovirt.engine.core.bll.network.host.HostSetupNetworksCommand] (EE-ManagedThreadFactory-engine-Thread-1) [2598128e] Validation of action 'HostSetupNetworks' failed for user admin@internal-authz. Reasons: VAR__ACTION__SETUP,VAR__TYPE__NETWORKS,INVALID_BOND_MODE_FOR_BOND_WITH_VM_NETWORK,$BondName bond0,$networkName ovirtmgmt
Please use a valid bond mode for the bond selected on the management network (I'll try to understand why the setup tool didn't detected it before).
Ok, the issue is here: 2019-06-17 13:50:04,014+0200 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Please indicate a nic to set ovirtmgmt bridge on: (team0, team0.13, team0.19) [team0.13]: 2019-06-17 13:50:14,978+0200 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:RECEIVE team0.19 oVirt doesn't support at all the teamed devices but just bonds, please see: https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks.html#b... Unfortunately ansible facts module as for https://github.com/ansible/ansible/issues/43129 also fails discriminating a teamed interface from a plain one and so you were able to select it.
On Wed, Jun 26, 2019 at 10:46 AM <raffaele@stefanile.com> wrote:
Yes, I am using the same two interface in bond configuration with one vlan for the storage and annoter one for the mgmt. _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/56UBS4RALC2QQ6...
--
Simone Tiraboschi
He / Him / His
Principal Software Engineer
Red Hat <https://www.redhat.com/>
stirabos@redhat.com @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit>
-- Simone Tiraboschi He / Him / His Principal Software Engineer Red Hat <https://www.redhat.com/> stirabos@redhat.com @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit>
participants (5)
-
raffaele＠stefanile.com -
Simone Tiraboschi -
Slobodan Stevanovic -
Stefanile Raffaele -
Yedidyah Bar David