[ANN] oVirt 4.3.6 Second Release Candidate is now available for testing

The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019. This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.6/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

I just tried to update my 4.6 testlab and got the following RPM dependency issue: rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch Error encountered: yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ... Regards, Brett On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...

Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

Thanks Sandro, Run into another dependency issue though: Resolving Dependencies --> Running transaction check ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.1.rc1.el7 will be updated ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.2.rc2.el7 will be an update ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-lib.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-lib.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be obsoleted ---> Package vdsm.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm.x86_64 0:4.30.26-1.el7 will be an update --> Processing Dependency: sanlock-python >= 3.7.3 for package: vdsm-4.30.26-1.el7.x86_64 ---> Package vdsm-api.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-api.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-client.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-client.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-common.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-common.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-gluster.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-gluster.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-fcoe.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-fcoe.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-openstacknet.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-openstacknet.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vhostmd.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vhostmd.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-http.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-http.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-jsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-jsonrpc.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-network.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-network.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-python.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-python.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-yajsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-yajsonrpc.noarch 0:4.30.26-1.el7 will be an update --> Running transaction check ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-python.x86_64 0:3.7.3-1.el7 will be an update --> Finished Dependency Resolution Error: Package: python2-sanlock-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) Requires: sanlock-lib = 3.7.1-1.el7 Removing: sanlock-lib-3.6.0-1.el7.x86_64 (@base) sanlock-lib = 3.6.0-1.el7 Updated By: sanlock-lib-3.7.3-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.3-1.el7 Available: sanlock-lib-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-1.el7 Available: sanlock-lib-3.7.1-2.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.el7 Available: sanlock-lib-3.7.1-2.1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest On Thu, 8 Aug 2019 at 08:59, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

Il giorno gio 8 ago 2019 alle ore 10:37 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Thanks Sandro,
Run into another dependency issue though:
Resolving Dependencies --> Running transaction check ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.1.rc1.el7 will be updated ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.2.rc2.el7 will be an update ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-lib.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-lib.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be obsoleted ---> Package vdsm.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm.x86_64 0:4.30.26-1.el7 will be an update --> Processing Dependency: sanlock-python >= 3.7.3 for package: vdsm-4.30.26-1.el7.x86_64 ---> Package vdsm-api.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-api.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-client.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-client.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-common.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-common.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-gluster.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-gluster.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-fcoe.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-fcoe.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-openstacknet.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-openstacknet.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vhostmd.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vhostmd.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-http.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-http.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-jsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-jsonrpc.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-network.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-network.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-python.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-python.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-yajsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-yajsonrpc.noarch 0:4.30.26-1.el7 will be an update --> Running transaction check ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-python.x86_64 0:3.7.3-1.el7 will be an update --> Finished Dependency Resolution Error: Package: python2-sanlock-3.7.1-1.el7.x86_64 (ovirt-4.3-fix)
this is weird, https://cbs.centos.org/koji/buildinfo?buildID=25776 3.7.1-1 shouldn't be there, it's not tagged for testing. can you please exclude python2-sanlock in your repo file? exclude=python2-sanlock
Requires: sanlock-lib = 3.7.1-1.el7 Removing: sanlock-lib-3.6.0-1.el7.x86_64 (@base) sanlock-lib = 3.6.0-1.el7 Updated By: sanlock-lib-3.7.3-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.3-1.el7 Available: sanlock-lib-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-1.el7 Available: sanlock-lib-3.7.1-2.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.el7 Available: sanlock-lib-3.7.1-2.1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
On Thu, 8 Aug 2019 at 08:59, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

Sure, it seems to be running now. For anyone else with this issue, I ended up with this addtional repo file: cat /etc/yum.repos.d/ov4.3-fix.repo [ovirt-4.3-fix] name=oVirt 4.3 Pre-Release Fix CentOS 7.7 baseurl=https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.3 exclude=python2-sanlock On Thu, 8 Aug 2019 at 09:55, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 10:37 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Thanks Sandro,
Run into another dependency issue though:
Resolving Dependencies --> Running transaction check ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.1.rc1.el7 will be updated ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.2.rc2.el7 will be an update ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-lib.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-lib.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be obsoleted ---> Package vdsm.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm.x86_64 0:4.30.26-1.el7 will be an update --> Processing Dependency: sanlock-python >= 3.7.3 for package: vdsm-4.30.26-1.el7.x86_64 ---> Package vdsm-api.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-api.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-client.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-client.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-common.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-common.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-gluster.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-gluster.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-fcoe.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-fcoe.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-openstacknet.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-openstacknet.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vhostmd.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vhostmd.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-http.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-http.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-jsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-jsonrpc.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-network.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-network.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-python.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-python.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-yajsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-yajsonrpc.noarch 0:4.30.26-1.el7 will be an update --> Running transaction check ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-python.x86_64 0:3.7.3-1.el7 will be an update --> Finished Dependency Resolution Error: Package: python2-sanlock-3.7.1-1.el7.x86_64 (ovirt-4.3-fix)
this is weird, https://cbs.centos.org/koji/buildinfo?buildID=25776 3.7.1-1 shouldn't be there, it's not tagged for testing. can you please exclude python2-sanlock in your repo file?
exclude=python2-sanlock
Requires: sanlock-lib = 3.7.1-1.el7 Removing: sanlock-lib-3.6.0-1.el7.x86_64 (@base) sanlock-lib = 3.6.0-1.el7 Updated By: sanlock-lib-3.7.3-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.3-1.el7 Available: sanlock-lib-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-1.el7 Available: sanlock-lib-3.7.1-2.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.el7 Available: sanlock-lib-3.7.1-2.1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
On Thu, 8 Aug 2019 at 08:59, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

Il giorno gio 8 ago 2019 alle ore 11:20 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Sure, it seems to be running now.
For anyone else with this issue, I ended up with this addtional repo file:
cat /etc/yum.repos.d/ov4.3-fix.repo [ovirt-4.3-fix] name=oVirt 4.3 Pre-Release Fix CentOS 7.7 baseurl=https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.3
exclude=python2-sanlock
thanks, adding it to release notes for 4.3.6 rc2 here: https://github.com/oVirt/ovirt-site/pull/2067
On Thu, 8 Aug 2019 at 09:55, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 10:37 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Thanks Sandro,
Run into another dependency issue though:
Resolving Dependencies --> Running transaction check ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.1.rc1.el7 will be updated ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.2.rc2.el7 will be an update ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-lib.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-lib.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be obsoleted ---> Package vdsm.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm.x86_64 0:4.30.26-1.el7 will be an update --> Processing Dependency: sanlock-python >= 3.7.3 for package: vdsm-4.30.26-1.el7.x86_64 ---> Package vdsm-api.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-api.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-client.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-client.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-common.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-common.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-gluster.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-gluster.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-fcoe.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-fcoe.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-openstacknet.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-openstacknet.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vhostmd.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vhostmd.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-http.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-http.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-jsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-jsonrpc.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-network.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-network.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-python.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-python.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-yajsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-yajsonrpc.noarch 0:4.30.26-1.el7 will be an update --> Running transaction check ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-python.x86_64 0:3.7.3-1.el7 will be an update --> Finished Dependency Resolution Error: Package: python2-sanlock-3.7.1-1.el7.x86_64 (ovirt-4.3-fix)
this is weird, https://cbs.centos.org/koji/buildinfo?buildID=25776 3.7.1-1 shouldn't be there, it's not tagged for testing. can you please exclude python2-sanlock in your repo file?
exclude=python2-sanlock
Requires: sanlock-lib = 3.7.1-1.el7 Removing: sanlock-lib-3.6.0-1.el7.x86_64 (@base) sanlock-lib = 3.6.0-1.el7 Updated By: sanlock-lib-3.7.3-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.3-1.el7 Available: sanlock-lib-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-1.el7 Available: sanlock-lib-3.7.1-2.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.el7 Available: sanlock-lib-3.7.1-2.1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
On Thu, 8 Aug 2019 at 08:59, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
The oVirt Project is pleased to announce the availability of the oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019.
This update is a release candidate of the sixth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production.
This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8)
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only)
See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed.
Notes: - oVirt Appliance is already available - oVirt Node is not yet available, pending CentOS 7.7 release to be available
Additional Resources: * Read more about the oVirt 4.3.6 release highlights: http://www.ovirt.org/release/4.3.6/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.3.6/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.* _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
-- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

Oops, package not signed, update to disable gpgcheck... cat /etc/yum.repos.d/ov4.3-fix.repo [ovirt-4.3-fix] name=oVirt 4.3 Pre-Release Fix CentOS 7.7 baseurl=https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ enabled=1 gpgcheck=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.3 exclude=python2-sanlock On Thu, 8 Aug 2019 at 10:27, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 11:20 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Sure, it seems to be running now.
For anyone else with this issue, I ended up with this addtional repo file:
cat /etc/yum.repos.d/ov4.3-fix.repo [ovirt-4.3-fix] name=oVirt 4.3 Pre-Release Fix CentOS 7.7 baseurl=https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.3
exclude=python2-sanlock
thanks, adding it to release notes for 4.3.6 rc2 here: https://github.com/oVirt/ovirt-site/pull/2067
On Thu, 8 Aug 2019 at 09:55, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 10:37 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
Thanks Sandro,
Run into another dependency issue though:
Resolving Dependencies --> Running transaction check ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.1.rc1.el7 will be updated ---> Package ovirt-release43-pre.noarch 0:4.3.6-0.2.rc2.el7 will be an update ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-lib.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-lib.x86_64 0:3.7.3-1.el7 will be an update ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be obsoleted ---> Package vdsm.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm.x86_64 0:4.30.26-1.el7 will be an update --> Processing Dependency: sanlock-python >= 3.7.3 for package: vdsm-4.30.26-1.el7.x86_64 ---> Package vdsm-api.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-api.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-client.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-client.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-common.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-common.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-gluster.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-gluster.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-ethtool-options.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-fcoe.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-fcoe.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-openstacknet.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-openstacknet.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vhostmd.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vhostmd.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-hook-vmfex-dev.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-http.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-http.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-jsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-jsonrpc.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-network.x86_64 0:4.30.25-1.el7 will be updated ---> Package vdsm-network.x86_64 0:4.30.26-1.el7 will be an update ---> Package vdsm-python.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-python.noarch 0:4.30.26-1.el7 will be an update ---> Package vdsm-yajsonrpc.noarch 0:4.30.25-1.el7 will be updated ---> Package vdsm-yajsonrpc.noarch 0:4.30.26-1.el7 will be an update --> Running transaction check ---> Package python2-sanlock.x86_64 0:3.7.1-1.el7 will be obsoleting --> Processing Dependency: sanlock-lib = 3.7.1-1.el7 for package: python2-sanlock-3.7.1-1.el7.x86_64 ---> Package sanlock-python.x86_64 0:3.6.0-1.el7 will be updated ---> Package sanlock-python.x86_64 0:3.7.3-1.el7 will be an update --> Finished Dependency Resolution Error: Package: python2-sanlock-3.7.1-1.el7.x86_64 (ovirt-4.3-fix)
this is weird, https://cbs.centos.org/koji/buildinfo?buildID=25776 3.7.1-1 shouldn't be there, it's not tagged for testing. can you please exclude python2-sanlock in your repo file?
exclude=python2-sanlock
Requires: sanlock-lib = 3.7.1-1.el7 Removing: sanlock-lib-3.6.0-1.el7.x86_64 (@base) sanlock-lib = 3.6.0-1.el7 Updated By: sanlock-lib-3.7.3-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.3-1.el7 Available: sanlock-lib-3.7.1-1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-1.el7 Available: sanlock-lib-3.7.1-2.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.el7 Available: sanlock-lib-3.7.1-2.1.el7.x86_64 (ovirt-4.3-fix) sanlock-lib = 3.7.1-2.1.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
On Thu, 8 Aug 2019 at 08:59, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il giorno gio 8 ago 2019 alle ore 09:56 Maton, Brett < matonb@ltresources.co.uk> ha scritto:
I just tried to update my 4.6 testlab and got the following RPM dependency issue:
rpm -qa ovirt-release* ovirt-release43-pre-4.3.6-0.1.rc1.el7.noarch
Error encountered:
yum upgrade ... Error: Package: vdsm-4.30.26-1.el7.x86_64 (ovirt-4.3-pre) Requires: sanlock-python >= 3.7.3 Installed: sanlock-python-3.6.0-1.el7.x86_64 (@base) sanlock-python = 3.6.0-1.el7 ...
yes, as mentioned in release announce, this requires RHEL / CentOS 7.7. you can workaround this by adding https://buildlogs.centos.org/centos/7/virt/x86_64/ovirt-4.3/ repo until CentOS 7.7 will be released
Regards, Brett
On Thu, 8 Aug 2019 at 07:53, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
> The oVirt Project is pleased to announce the availability of the > oVirt 4.3.6 Second Release Candidate for testing, as of August 8th, 2019. > > This update is a release candidate of the sixth in a series of > stabilization updates to the 4.3 series. > This is pre-release software. This pre-release should not to be used > in production. > > This release is available now on x86_64 architecture for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > > This release supports Hypervisor Hosts on x86_64 and ppc64le > architectures for: > * Red Hat Enterprise Linux 7.7 or later (but <8) > * CentOS Linux (or similar) 7.7 or later (but <8) > * oVirt Node 4.3 (available for x86_64 only) > > See the release notes [1] for installation / upgrade instructions > and a list of new features and bugs fixed. > > Notes: > - oVirt Appliance is already available > - oVirt Node is not yet available, pending CentOS 7.7 release to be > available > > Additional Resources: > * Read more about the oVirt 4.3.6 release highlights: > http://www.ovirt.org/release/4.3.6/ > * Get more oVirt Project updates on Twitter: > https://twitter.com/ovirt > * Check out the latest project news on the oVirt blog: > http://www.ovirt.org/blog/ > > [1] http://www.ovirt.org/release/4.3.6/ > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA <https://www.redhat.com/> > > sbonazzo@redhat.com > <https://www.redhat.com/>*Red Hat respects your work life balance. > Therefore there is no need to answer this email out of your office hours.* > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/6STDS7UGBADU2I... >
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo@redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*
participants (2)
-
Maton, Brett
-
Sandro Bonazzola