7:39 a.m.
Greetings,
My setup is a complete Red Hat install.
Manager OS: RHEL 7.5
Hypervisors OS: RHEL 7.5
Running Red Hat CephFS (with their Ceph repos on all of the systems)
with Red Hat Virtualization (aka oVirt).
Everything is fully patched and updated as of yesterday morning.
Yes, I have valid Red Hat support but I figured this was an odd enough
problem that the community (and the Red-Hat-ers who hang out on this
list) might have a better idea of where to start. (Although I might open
a ticket anyway just because that is what support is for, right? :)
Quick background:
Your /etc/fstab when you mount a nfs should probably look something like
this:
<your.nfs.ip.addr>:/path/ /mount/point nfs <various options> 0 0
Just one IP is needed. Since part of the redundancy for Ceph is in the
monitors, to mount CephFS the fstab should look something like this:
<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/
/mount/point ceph <various options> 0 0
Both the Ceph community and Red Hat recommend the comma separator for
mounting multiple CephFS monitor nodes. (See section 4.2 point 3)
https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html...
Now to oVirt/RHV.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>:/path/" it works splendidly well (especially after
the last Red Hat kernel update!). I've done a bunch of stuff to it and
it seems to work every time. However, I don't have the redundancy of
multiple Ceph Monitors.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/"
most things seem to work. But I noticed a higher rate of failures. The
only failure that I can trigger 100% of the time though is to mount a
second data import domain and attempt to copy a vm disk from the import
into the CephFS Data domain. Then I get an error like this:
would
VDSM ovirt01 command HSMGetAllTasksStatusesVDS failed:
low level Image copy failed:
(u'Destination volume 7c1bb510-9f35-4456-8d51-0955f788ac3e error:
ParamsList: sep , in
/rhev/data-center/mnt/<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addr3>:_ovirt_data/70fb34ad-e66d-43e6-8412-5e020baa34df/images/23991a68-0c43-433f-b1f9-48b1533da54a',)
Uh, oh. It seems that the commas in the mount path are causing the
problems. So I went looking through the logs for "sep , in" and found a
bunch more hits which makes me think that this is actually the problem
message.
I've switched back to just one IP address for the time being but I
obviously want the Ceph redundancy back. While running on just one IP,
the vm disk that refused to copy before had no problem copying. The
_only_ change I made was dropping two of the three IP's from the Data
Domain path option.
Is this a bug, or did I do something wrong?
Does anyone have a suggestion for me to try?
Thank you!
~Stack~
9:28 a.m.
On Wed, 29 Aug 2018, 15:48 Stack Korora, <stackkorora(a)disroot.org> wrote:
Greetings,
My setup is a complete Red Hat install.
Manager OS: RHEL 7.5
Hypervisors OS: RHEL 7.5
Running Red Hat CephFS (with their Ceph repos on all of the systems)
with Red Hat Virtualization (aka oVirt).
Everything is fully patched and updated as of yesterday morning.
Yes, I have valid Red Hat support but I figured this was an odd enough
problem that the community (and the Red-Hat-ers who hang out on this
list) might have a better idea of where to start. (Although I might open
a ticket anyway just because that is what support is for, right? :)
Quick background:
Your /etc/fstab when you mount a nfs should probably look something like
this:
<your.nfs.ip.addr>:/path/ /mount/point nfs <various options> 0 0
Just one IP is needed. Since part of the redundancy for Ceph is in the
monitors, to mount CephFS the fstab should look something like this:
<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/
/mount/point ceph <various options> 0 0
Both the Ceph community and Red Hat recommend the comma separator for
mounting multiple CephFS monitor nodes. (See section 4.2 point 3)
https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html...
Now to oVirt/RHV.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>:/path/" it works splendidly well (especially after
the last Red Hat kernel update!). I've done a bunch of stuff to it and
it seems to work every time. However, I don't have the redundancy of
multiple Ceph Monitors.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/"
most things seem to work. But I noticed a higher rate of failures. The
only failure that I can trigger 100% of the time though is to mount a
second data import domain and attempt to copy a vm disk from the import
into the CephFS Data domain. Then I get an error like this:
would
VDSM ovirt01 command HSMGetAllTasksStatusesVDS failed:
low level Image copy failed:
(u'Destination volume 7c1bb510-9f35-4456-8d51-0955f788ac3e error:
ParamsList: sep , in
/rhev/data-center/mnt/<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addr3>:_ovirt_data/70fb34ad-e66d-43e6-8412-5e020baa34df/images/23991a68-0c43-433f-b1f9-48b1533da54a',)
Uh, oh. It seems that the commas in the mount path are causing the
problems. So I went looking through the logs for "sep , in" and found a
bunch more hits which makes me think that this is actually the problem
message.
I've switched back to just one IP address for the time being but I
obviously want the Ceph redundancy back. While running on just one IP,
the vm disk that refused to copy before had no problem copying. The
_only_ change I made was dropping two of the three IP's from the Data
Domain path option.
Is this a bug, or did I do something wrong?
Looks like a bug,aybe vdsm is not parsing the mount spec correctly.
Please file vdsm bug and attach vdsm logs showing the entire flow.
Regardless, I'm not sure how well oVirt with cephfs is tested, or
recommended.
Adding Yaniv t9 add more info on this.
Nir
Does anyone have a suggestion for me to try?
Thank you!
~Stack~
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VVKOIQIDEH...
10:14 a.m.
Hi,
maybe a foolish guess: Did you try this
https://www.spinics.net/lists/ceph-devel/msg30958.html
Mit freundlichen Grüßen,
Markus Stockhausen
Head of Software Technology
Ubierring 11 · 50678 Köln
Telefon: +49 221 33 608 611
Mobil: +49 151 12040606
Mail: markus.stockhausen(a)collogia.de
Web: www.collogia-it-services.de
________________________________________
Von: Stack Korora [stackkorora(a)disroot.org]
Gesendet: Mittwoch, 29. August 2018 14:39
An: users
Betreff: [ovirt-users] Multiple CephFS Monitors cause issues with oVirt
Greetings,
My setup is a complete Red Hat install.
Manager OS: RHEL 7.5
Hypervisors OS: RHEL 7.5
Running Red Hat CephFS (with their Ceph repos on all of the systems)
with Red Hat Virtualization (aka oVirt).
Everything is fully patched and updated as of yesterday morning.
Yes, I have valid Red Hat support but I figured this was an odd enough
problem that the community (and the Red-Hat-ers who hang out on this
list) might have a better idea of where to start. (Although I might open
a ticket anyway just because that is what support is for, right? :)
Quick background:
Your /etc/fstab when you mount a nfs should probably look something like
this:
<your.nfs.ip.addr>:/path/ /mount/point nfs <various options> 0 0
Just one IP is needed. Since part of the redundancy for Ceph is in the
monitors, to mount CephFS the fstab should look something like this:
<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/
/mount/point ceph <various options> 0 0
Both the Ceph community and Red Hat recommend the comma separator for
mounting multiple CephFS monitor nodes. (See section 4.2 point 3)
https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html...
Now to oVirt/RHV.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>:/path/" it works splendidly well (especially after
the last Red Hat kernel update!). I've done a bunch of stuff to it and
it seems to work every time. However, I don't have the redundancy of
multiple Ceph Monitors.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/"
most things seem to work. But I noticed a higher rate of failures. The
only failure that I can trigger 100% of the time though is to mount a
second data import domain and attempt to copy a vm disk from the import
into the CephFS Data domain. Then I get an error like this:
would
VDSM ovirt01 command HSMGetAllTasksStatusesVDS failed:
low level Image copy failed:
(u'Destination volume 7c1bb510-9f35-4456-8d51-0955f788ac3e error:
ParamsList: sep , in
/rhev/data-center/mnt/<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addr3>:_ovirt_data/70fb34ad-e66d-43e6-8412-5e020baa34df/images/23991a68-0c43-433f-b1f9-48b1533da54a',)
Uh, oh. It seems that the commas in the mount path are causing the
problems. So I went looking through the logs for "sep , in" and found a
bunch more hits which makes me think that this is actually the problem
message.
I've switched back to just one IP address for the time being but I
obviously want the Ceph redundancy back. While running on just one IP,
the vm disk that refused to copy before had no problem copying. The
_only_ change I made was dropping two of the three IP's from the Data
Domain path option.
Is this a bug, or did I do something wrong?
Does anyone have a suggestion for me to try?
Thank you!
~Stack~
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6VVKOIQIDEH...
10:41 a.m.
New subject: Multiple CephFS Monitors cause issues with oVirt
On 08/29/2018 09:28 AM, Nir Soffer wrote:
On Wed, 29 Aug 2018, 15:48 Stack Korora, <stackkorora(a)disroot.org
<mailto:stackkorora@disroot.org>> wrote:
Greetings,
My setup is a complete Red Hat install.
Manager OS: RHEL 7.5
Hypervisors OS: RHEL 7.5
Running Red Hat CephFS (with their Ceph repos on all of the systems)
with Red Hat Virtualization (aka oVirt).
Everything is fully patched and updated as of yesterday morning.
Yes, I have valid Red Hat support but I figured this was an odd enough
problem that the community (and the Red-Hat-ers who hang out on this
list) might have a better idea of where to start. (Although I
might open
a ticket anyway just because that is what support is for, right? :)
Quick background:
Your /etc/fstab when you mount a nfs should probably look
something like
this:
<your.nfs.ip.addr>:/path/ /mount/point nfs <various options> 0 0
Just one IP is needed. Since part of the redundancy for Ceph is in the
monitors, to mount CephFS the fstab should look something like this:
<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/
/mount/point ceph <various options> 0 0
Both the Ceph community and Red Hat recommend the comma separator for
mounting multiple CephFS monitor nodes. (See section 4.2 point 3)
https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html...
Now to oVirt/RHV.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>:/path/" it works splendidly well (especially
after
the last Red Hat kernel update!). I've done a bunch of stuff to it and
it seems to work every time. However, I don't have the redundancy of
multiple Ceph Monitors.
When I mount my Data Domain path as a Posix file system with a path of
"<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addrX>:/path/"
most things seem to work. But I noticed a higher rate of failures. The
only failure that I can trigger 100% of the time though is to mount a
second data import domain and attempt to copy a vm disk from the
import
into the CephFS Data domain. Then I get an error like this:
would
VDSM ovirt01 command HSMGetAllTasksStatusesVDS failed:
low level Image copy failed:
(u'Destination volume 7c1bb510-9f35-4456-8d51-0955f788ac3e error:
ParamsList: sep , in
/rhev/data-center/mnt/<your.ceph.ip.addr1>,<your.ceph.ip.addr2>,<your.ceph.ip.addr3>:_ovirt_data/70fb34ad-e66d-43e6-8412-5e020baa34df/images/23991a68-0c43-433f-b1f9-48b1533da54a',)
Uh, oh. It seems that the commas in the mount path are causing the
problems. So I went looking through the logs for "sep , in" and
found a
bunch more hits which makes me think that this is actually the problem
message.
I've switched back to just one IP address for the time being but I
obviously want the Ceph redundancy back. While running on just one IP,
the vm disk that refused to copy before had no problem copying. The
_only_ change I made was dropping two of the three IP's from the Data
Domain path option.
Is this a bug, or did I do something wrong?
Looks like a bug,aybe vdsm is not parsing the mount spec correctly.
Please file vdsm bug and attach vdsm logs showing the entire flow.
Regardless, I'm not sure how well oVirt with cephfs is tested, or
recommended.
Adding Yaniv t9 add more info on this.
Nir
Thank you. I can file a report today.
10:44 a.m.
New subject: Multiple CephFS Monitors cause issues with oVirt
On 08/29/2018 10:14 AM, Markus Stockhausen wrote:
Hi,
maybe a foolish guess: Did you try this
https://www.spinics.net/lists/ceph-devel/msg30958.html
Mit freundlichen Grüßen,
Markus Stockhausen
Head of Software Technology
Thanks, I thought about that but I have not tried it. I will add it to
my list to check today and will report back if it works (though I don't
see why it wouldn't). It is good to know that someone else has at least
had success with having a DNS entry for the multiple CephFS monitor hosts.
~Stack~
5:15 p.m.
New subject: Multiple CephFS Monitors cause issues with oVirt
On 08/29/2018 10:44 AM, Stack Korora wrote:
On 08/29/2018 10:14 AM, Markus Stockhausen wrote:
> Hi,
>
> maybe a foolish guess: Did you try this
>
> https://www.spinics.net/lists/ceph-devel/msg30958.html
>
> Mit freundlichen Grüßen,
>
> Markus Stockhausen
> Head of Software Technology
Thanks, I thought about that but I have not tried it. I will add it to
my list to check today and will report back if it works (though I don't
see why it wouldn't). It is good to know that someone else has at least
had success with having a DNS entry for the multiple CephFS monitor hosts.
A single DNS entry did not work. Red Hat's oVirt did not like mounting
it even though it works fine via command line. :-/
I now have a Red Hat ticket open so we will see what happens on that front.
Thanks!
~Stack~
5:41 p.m.
On Thu, Aug 30, 2018 at 1:24 AM Stack Korora <stackkorora(a)disroot.org>
wrote:
On 08/29/2018 10:44 AM, Stack Korora wrote:
> On 08/29/2018 10:14 AM, Markus Stockhausen wrote:
>> Hi,
>>
>> maybe a foolish guess: Did you try this
>>
>> https://www.spinics.net/lists/ceph-devel/msg30958.html
>>
>> Mit freundlichen Grüßen,
>>
>> Markus Stockhausen
>> Head of Software Technology
> Thanks, I thought about that but I have not tried it. I will add it to
> my list to check today and will report back if it works (though I don't
> see why it wouldn't). It is good to know that someone else has at least
> had success with having a DNS entry for the multiple CephFS monitor
hosts.
A single DNS entry did not work. Red Hat's oVirt did not like mounting
it even though it works fine via command line. :-/
I now have a Red Hat ticket open so we will see what happens on that front.
I can confirm that multiple hosts:port in a mount spec is not supported by
the current code.
You can see all the supported formats here:
https://github.com/oVirt/vdsm/blob/d43376f3b2e913f3ee0ef226b5c196eb03da70...
Nir
11:31 p.m.
Hi,
I think that there's already a bug on this issue:
*Bug 1577529* <https://bugzilla.redhat.com/show_bug.cgi?id=1577529> - [RFE]
Support multiple hosts in posix storage domain path for cephfs
Regards,
Idan
On Thu, Aug 30, 2018 at 1:41 AM, Nir Soffer <nsoffer(a)redhat.com> wrote:
On Thu, Aug 30, 2018 at 1:24 AM Stack Korora
<stackkorora(a)disroot.org>
wrote:
> On 08/29/2018 10:44 AM, Stack Korora wrote:
> > On 08/29/2018 10:14 AM, Markus Stockhausen wrote:
> >> Hi,
> >>
> >> maybe a foolish guess: Did you try this
> >>
> >> https://www.spinics.net/lists/ceph-devel/msg30958.html
> >>
> >> Mit freundlichen Grüßen,
> >>
> >> Markus Stockhausen
> >> Head of Software Technology
> > Thanks, I thought about that but I have not tried it. I will add it to
> > my list to check today and will report back if it works (though I don't
> > see why it wouldn't). It is good to know that someone else has at least
> > had success with having a DNS entry for the multiple CephFS monitor
> hosts.
>
> A single DNS entry did not work. Red Hat's oVirt did not like mounting
> it even though it works fine via command line. :-/
>
> I now have a Red Hat ticket open so we will see what happens on that
> front.
>
I can confirm that multiple hosts:port in a mount spec is not supported by
the current code.
You can see all the supported formats here:
https://github.com/oVirt/vdsm/blob/d43376f3b2e913f3ee0ef226b5c196
eb03da708f/tests/storage/fileutil_test.py#L182
Nir
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/IEHMS5UZIF4HXYY7YEP6H66TMU74DAWW/
12:06 a.m.
New subject: Multiple CephFS Monitors cause issues with oVirt
Hm,
why should OVirt mount differently to OS? You just provide the Mount options and I expect
that the Python scripts wrap that to a normal Command.
Strange.
Btw. Can you add me to the BZ?
Markus
Am 30.08.2018 00:25 schrieb Stack Korora <stackkorora(a)disroot.org>:
On 08/29/2018 10:44 AM, Stack Korora wrote:
On 08/29/2018 10:14 AM, Markus Stockhausen wrote:
> Hi,
>
> maybe a foolish guess: Did you try this
>
> https://www.spinics.net/lists/ceph-devel/msg30958.html
>
> Mit freundlichen Grüßen,
>
> Markus Stockhausen
> Head of Software Technology
Thanks, I thought about that but I have not tried it. I will add it to
my list to check today and will report back if it works (though I don't
see why it wouldn't). It is good to know that someone else has at least
had success with having a DNS entry for the multiple CephFS monitor hosts.
A single DNS entry did not work. Red Hat's oVirt did not like mounting
it even though it works fine via command line. :-/
I now have a Red Hat ticket open so we will see what happens on that front.
Thanks!
~Stack~
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4RFPEUFOIGH...
2082
days inactive
2083
days old
8 comments
4 participants
participants (4)
-
Idan Shaby -
Markus Stockhausen -
Nir Soffer -
Stack Korora