7:11 a.m.
Hi all,
When setting up hosted engine setup on top gluster with 3 nodes, I had
gluster configured on a separate network interface, as recommended. When I
tried later to upload ISO from engine to ISO domain, the engine was not
able to upload it since the VM did not have access to the separate storage
network. I then added the storage network interface to the hosted engine
and ISO upload succeeded.
1st question: do I need to add the network interface to engine in order to
upload ISOs? does there exist any alternate way?
Then I proceeded to configure bonding for the storage domain, bonding 2
NICs at each server. When trying to set a custom bond of mode=6 (as
recommended from gluster) I received a warning that mode0, 5 and 6 cannot
be configured since the interface is used from VMs. I also understood that
having the storage network assigned to VMs makes it a bridge which
decreases performance of networking. When trying to remove the network
interface from engine it cannot be done, since the engine is running.
2nd question: Is there a way I can remove the secondary storage network
interface from the engine?
Many thanx
7:32 a.m.
On 06/27/2017 05:41 PM, Abi Askushi wrote:
Hi all,
When setting up hosted engine setup on top gluster with 3 nodes, I had
gluster configured on a separate network interface, as recommended.
When I tried later to upload ISO from engine to ISO domain, the engine
was not able to upload it since the VM did not have access to the
separate storage network. I then added the storage network interface
to the hosted engine and ISO upload succeeded.
May i know what was the volume type
created and added as ISO domain ?
If you plan to use a glusterfs volume below is the procedure :
1) Create a glusterfs volume.
2) While adding storage domain select Domain Function as 'ISO' and
Storage Type as 'glusterfs' .
3) You can either use 'use managed gluster volume' check box and select
the gluster volume which you have created for storing ISO's or you can
type the full path of the volume.
4) Once this is added please make sure to set the option nfs.disable off.
5) Now you can go to HE engine and run the command engine-iso-uploader
upload -i <gluster_iso_domain_name> <iso_file>
Iso gets uploaded successfully.
1st question: do I need to add the network interface to engine in
order to upload ISOs? does there exist any alternate way?
AFAIK, this is not
required when glusterfs volume is used.
Attached is the screenshot where i have only one network attached to my
HE which is ovirtmgmt.
Then I proceeded to configure bonding for the storage domain, bonding
2 NICs at each server. When trying to set a custom bond of mode=6 (as
recommended from gluster) I received a warning that mode0, 5 and 6
cannot be configured since the interface is used from VMs. I also
understood that having the storage network assigned to VMs makes it a
bridge which decreases performance of networking. When trying to
remove the network interface from engine it cannot be done, since the
engine is running.
2nd question: Is there a way I can remove the secondary storage
network interface from the engine?
Many thanx
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
8:04 a.m.
Hi Knarra,
The ISO domain is of type gluster though I had nfs enabled on that volume.
I will disable the nfs and try. Though in order to try I need first to
remove that second interface from engine.
Is there a way I can remove the secondary storage network interface from
the engine?
Thanx
On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com> wrote:
On 06/27/2017 05:41 PM, Abi Askushi wrote:
Hi all,
When setting up hosted engine setup on top gluster with 3 nodes, I had
gluster configured on a separate network interface, as recommended. When I
tried later to upload ISO from engine to ISO domain, the engine was not
able to upload it since the VM did not have access to the separate storage
network. I then added the storage network interface to the hosted engine
and ISO upload succeeded.
May i know what was the volume type created and added as ISO domain ?
If you plan to use a glusterfs volume below is the procedure :
1) Create a glusterfs volume.
2) While adding storage domain select Domain Function as 'ISO' and Storage
Type as 'glusterfs' .
3) You can either use 'use managed gluster volume' check box and select
the gluster volume which you have created for storing ISO's or you can type
the full path of the volume.
4) Once this is added please make sure to set the option nfs.disable off.
5) Now you can go to HE engine and run the command engine-iso-uploader
upload -i <gluster_iso_domain_name> <iso_file>
Iso gets uploaded successfully.
1st question: do I need to add the network interface to engine in order to
upload ISOs? does there exist any alternate way?
AFAIK, this is not required when glusterfs volume is used.
Attached is the screenshot where i have only one network attached to my HE
which is ovirtmgmt.
Then I proceeded to configure bonding for the storage domain, bonding 2
NICs at each server. When trying to set a custom bond of mode=6 (as
recommended from gluster) I received a warning that mode0, 5 and 6 cannot
be configured since the interface is used from VMs. I also understood that
having the storage network assigned to VMs makes it a bridge which
decreases performance of networking. When trying to remove the network
interface from engine it cannot be done, since the engine is running.
2nd question: Is there a way I can remove the secondary storage network
interface from the engine?
Many thanx
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
8:25 a.m.
This is a multi-part message in MIME format.
--------------DFD9860AA5CE5C2F724DFD86
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
On 06/27/2017 06:34 PM, Abi Askushi wrote:
Hi Knarra,
The ISO domain is of type gluster though I had nfs enabled on that
volume.
you need to have nfs enabled on the volume. what i meant is nfs.disable
off which means nfs is on.
For more info please refer to bug
https://bugzilla.redhat.com/show_bug.cgi?id=1437799
I will disable the nfs and try. Though in order to try I need first
to
remove that second interface from engine.
Is there a way I can remove the secondary storage network interface
from the engine?
I am not sure how to do that, but you may shutdown the vm using
the
command hosted-engine --vm-shutdown which will power off the vm and try
to remove the networks using vdsclient. (not sure if this is right, but
suggesting a way)
Thanx
On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com
<mailto:knarra@redhat.com>> wrote:
On 06/27/2017 05:41 PM, Abi Askushi wrote:
> Hi all,
>
> When setting up hosted engine setup on top gluster with 3 nodes,
> I had gluster configured on a separate network interface, as
> recommended. When I tried later to upload ISO from engine to ISO
> domain, the engine was not able to upload it since the VM did not
> have access to the separate storage network. I then added the
> storage network interface to the hosted engine and ISO upload
> succeeded.
May i know what was the volume type created and added as ISO domain ?
If you plan to use a glusterfs volume below is the procedure :
1) Create a glusterfs volume.
2) While adding storage domain select Domain Function as 'ISO' and
Storage Type as 'glusterfs' .
3) You can either use 'use managed gluster volume' check box and
select the gluster volume which you have created for storing ISO's
or you can type the full path of the volume.
4) Once this is added please make sure to set the option
nfs.disable off.
5) Now you can go to HE engine and run the command
engine-iso-uploader upload -i <gluster_iso_domain_name> <iso_file>
Iso gets uploaded successfully.
>
> 1st question: do I need to add the network interface to engine in
> order to upload ISOs? does there exist any alternate way?
AFAIK, this is not required when glusterfs volume is used.
Attached is the screenshot where i have only one network attached
to my HE which is ovirtmgmt.
>
> Then I proceeded to configure bonding for the storage domain,
> bonding 2 NICs at each server. When trying to set a custom bond
> of mode=6 (as recommended from gluster) I received a warning that
> mode0, 5 and 6 cannot be configured since the interface is used
> from VMs. I also understood that having the storage network
> assigned to VMs makes it a bridge which decreases performance of
> networking. When trying to remove the network interface from
> engine it cannot be done, since the engine is running.
>
> 2nd question: Is there a way I can remove the secondary storage
> network interface from the engine?
>
> Many thanx
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.ovirt.org/mailman/listinfo/users>
--------------DFD9860AA5CE5C2F724DFD86
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">On 06/27/2017 06:34 PM, Abi Askushi
wrote:<br>
</div>
<blockquote
cite="mid:CABMULtJwwZ1NYYv1NP0G6j1TNApitLzFXV-9eX5ptOH15WjEkQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>
<div>
<div>Hi Knarra, <br>
<br>
</div>
The ISO domain is of type gluster though I had nfs enabled
on that volume. <br>
</div>
</div>
</div>
</blockquote>
you need to have nfs enabled on the volume. what i meant is
nfs.disable off which means nfs is on.<br>
<br>
For more info please refer to bug
<a class="moz-txt-link-freetext"
href="https://bugzilla.redhat.com/show_bug.cgi?id=1437799">h...
<blockquote
cite="mid:CABMULtJwwZ1NYYv1NP0G6j1TNApitLzFXV-9eX5ptOH15WjEkQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>I will disable the nfs and try. Though in order to try I
need first to remove that second interface from engine. <br>
<span class="gmail-im">Is there a way I can remove the
secondary storage network interface from the engine?<br>
</span></div>
</div>
</blockquote>
I am not sure how to do that, but you may shutdown the vm using
the command hosted-engine --vm-shutdown which will power off the vm
and try to remove the networks using vdsclient. (not sure if this is
right, but suggesting a way)<br>
<blockquote
cite="mid:CABMULtJwwZ1NYYv1NP0G6j1TNApitLzFXV-9eX5ptOH15WjEkQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div><span class="gmail-im"><br>
</span></div>
<span class="gmail-im">Thanx<br>
</span></div>
</blockquote>
<br>
<blockquote
cite="mid:CABMULtJwwZ1NYYv1NP0G6j1TNApitLzFXV-9eX5ptOH15WjEkQ@mail.gmail.com"
type="cite">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, Jun 27, 2017 at 3:32 PM, knarra
<span dir="ltr"><<a moz-do-not-send="true"
href="mailto:knarra@redhat.com"
target="_blank">knarra(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"><span
class="">
<div class="m_-6805624692919781363moz-cite-prefix">On
06/27/2017 05:41 PM, Abi Askushi wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div>
<div>Hi all, <br>
<br>
</div>
When setting up hosted engine setup on top
gluster with 3 nodes, I had gluster configured
on a separate network interface, as
recommended. When I tried later to upload ISO
from engine to ISO domain, the engine was not
able to upload it since the VM did not have
access to the separate storage network. I then
added the storage network interface to the
hosted engine and ISO upload succeeded. <br>
</div>
</div>
</div>
</div>
</blockquote>
</span> May i know what was the volume type created and
added as ISO domain ?<br>
<br>
If you plan to use a glusterfs volume below is the
procedure :<br>
<br>
1) Create a glusterfs volume.<br>
2) While adding storage domain select Domain Function as
'ISO' and Storage Type as 'glusterfs' .<br>
3) You can either use 'use managed gluster volume' check
box and select the gluster volume which you have created
for storing ISO's or you can type the full path of the
volume.<br>
4) Once this is added please make sure to set the option
nfs.disable off.<br>
5) Now you can go to HE engine and run the command
engine-iso-uploader upload -i
<gluster_iso_domain_name> <iso_file><br>
<br>
Iso gets uploaded successfully.<span class=""><br>
<br>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div><br>
</div>
1st question: do I need to add the network
interface to engine in order to upload ISOs?
does there exist any alternate way?<br>
</div>
</div>
</div>
</blockquote>
</span> AFAIK, this is not required when glusterfs volume
is used.<br>
<br>
Attached is the screenshot where i have only one network
attached to my HE which is ovirtmgmt.<br>
<blockquote type="cite"><span class="">
<div dir="ltr">
<div>
<div><br>
</div>
Then I proceeded to configure bonding for the
storage domain, bonding 2 NICs at each server.
When trying to set a custom bond of mode=6 (as
recommended from gluster) I received a warning
that mode0, 5 and 6 cannot be configured since the
interface is used from VMs. I also understood that
having the storage network assigned to VMs makes
it a bridge which decreases performance of
networking. When trying to remove the network
interface from engine it cannot be done, since the
engine is running. <br>
<br>
2nd question: Is there a way I can remove the
secondary storage network interface from the
engine?<br>
<br>
</div>
Many thanx<br>
</div>
<br>
<fieldset
class="m_-6805624692919781363mimeAttachmentHeader"></fieldset>
<br>
</span>
<pre>______________________________<wbr>_________________
Users mailing list
<a moz-do-not-send="true"
class="m_-6805624692919781363moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a>
<a moz-do-not-send="true"
class="m_-6805624692919781363moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/<wbr>mailman/li...
</pre>
</blockquote>
<p>
</p>
</div>
</blockquote></div>
</div>
</blockquote><p>
</p></body></html>
--------------DFD9860AA5CE5C2F724DFD86--
8:54 a.m.
Hi Knarra,
Then I had already enabled NFS on ISO gluster volume.
Maybe i had some networking issue then. I need to remove the secondary
interface in order to test that again.
On Tue, Jun 27, 2017 at 4:25 PM, knarra <knarra(a)redhat.com> wrote:
On 06/27/2017 06:34 PM, Abi Askushi wrote:
Hi Knarra,
The ISO domain is of type gluster though I had nfs enabled on that volume.
you need to have nfs enabled on the volume. what i meant is nfs.disable
off which means nfs is on.
For more info please refer to bug https://bugzilla.redhat.com/
show_bug.cgi?id=1437799
I will disable the nfs and try. Though in order to try I need first to
remove that second interface from engine.
Is there a way I can remove the secondary storage network interface from
the engine?
I am not sure how to do that, but you may shutdown the vm using the
command hosted-engine --vm-shutdown which will power off the vm and try to
remove the networks using vdsclient. (not sure if this is right, but
suggesting a way)
Thanx
On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com> wrote:
> On 06/27/2017 05:41 PM, Abi Askushi wrote:
>
> Hi all,
>
> When setting up hosted engine setup on top gluster with 3 nodes, I had
> gluster configured on a separate network interface, as recommended. When I
> tried later to upload ISO from engine to ISO domain, the engine was not
> able to upload it since the VM did not have access to the separate storage
> network. I then added the storage network interface to the hosted engine
> and ISO upload succeeded.
>
> May i know what was the volume type created and added as ISO domain ?
>
> If you plan to use a glusterfs volume below is the procedure :
>
> 1) Create a glusterfs volume.
> 2) While adding storage domain select Domain Function as 'ISO' and
> Storage Type as 'glusterfs' .
> 3) You can either use 'use managed gluster volume' check box and select
> the gluster volume which you have created for storing ISO's or you can type
> the full path of the volume.
> 4) Once this is added please make sure to set the option nfs.disable off.
> 5) Now you can go to HE engine and run the command engine-iso-uploader
> upload -i <gluster_iso_domain_name> <iso_file>
>
> Iso gets uploaded successfully.
>
>
> 1st question: do I need to add the network interface to engine in order
> to upload ISOs? does there exist any alternate way?
>
> AFAIK, this is not required when glusterfs volume is used.
>
> Attached is the screenshot where i have only one network attached to my
> HE which is ovirtmgmt.
>
>
> Then I proceeded to configure bonding for the storage domain, bonding 2
> NICs at each server. When trying to set a custom bond of mode=6 (as
> recommended from gluster) I received a warning that mode0, 5 and 6 cannot
> be configured since the interface is used from VMs. I also understood that
> having the storage network assigned to VMs makes it a bridge which
> decreases performance of networking. When trying to remove the network
> interface from engine it cannot be done, since the engine is running.
>
> 2nd question: Is there a way I can remove the secondary storage network
> interface from the engine?
>
> Many thanx
>
>
> _______________________________________________
> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>
>
11:19 a.m.
Hi all,
Just in case ones needs it, in order to remove the secondary network
interface from engine, you can go to:
Virtual Machines -> Hostedengine -> Network Interfaces -> edit -> unplug it
-> confirm -> remove it.
It was simple...
On Tue, Jun 27, 2017 at 4:54 PM, Abi Askushi <rightkicktech(a)gmail.com>
wrote:
Hi Knarra,
Then I had already enabled NFS on ISO gluster volume.
Maybe i had some networking issue then. I need to remove the secondary
interface in order to test that again.
On Tue, Jun 27, 2017 at 4:25 PM, knarra <knarra(a)redhat.com> wrote:
> On 06/27/2017 06:34 PM, Abi Askushi wrote:
>
> Hi Knarra,
>
> The ISO domain is of type gluster though I had nfs enabled on that
> volume.
>
> you need to have nfs enabled on the volume. what i meant is nfs.disable
> off which means nfs is on.
>
> For more info please refer to bug https://bugzilla.redhat.com/sh
> ow_bug.cgi?id=1437799
>
> I will disable the nfs and try. Though in order to try I need first to
> remove that second interface from engine.
> Is there a way I can remove the secondary storage network interface from
> the engine?
>
> I am not sure how to do that, but you may shutdown the vm using the
> command hosted-engine --vm-shutdown which will power off the vm and try to
> remove the networks using vdsclient. (not sure if this is right, but
> suggesting a way)
>
>
> Thanx
>
>
>
> On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com> wrote:
>
>> On 06/27/2017 05:41 PM, Abi Askushi wrote:
>>
>> Hi all,
>>
>> When setting up hosted engine setup on top gluster with 3 nodes, I had
>> gluster configured on a separate network interface, as recommended. When I
>> tried later to upload ISO from engine to ISO domain, the engine was not
>> able to upload it since the VM did not have access to the separate storage
>> network. I then added the storage network interface to the hosted engine
>> and ISO upload succeeded.
>>
>> May i know what was the volume type created and added as ISO domain ?
>>
>> If you plan to use a glusterfs volume below is the procedure :
>>
>> 1) Create a glusterfs volume.
>> 2) While adding storage domain select Domain Function as 'ISO' and
>> Storage Type as 'glusterfs' .
>> 3) You can either use 'use managed gluster volume' check box and select
>> the gluster volume which you have created for storing ISO's or you can type
>> the full path of the volume.
>> 4) Once this is added please make sure to set the option nfs.disable off.
>> 5) Now you can go to HE engine and run the command engine-iso-uploader
>> upload -i <gluster_iso_domain_name> <iso_file>
>>
>> Iso gets uploaded successfully.
>>
>>
>> 1st question: do I need to add the network interface to engine in order
>> to upload ISOs? does there exist any alternate way?
>>
>> AFAIK, this is not required when glusterfs volume is used.
>>
>> Attached is the screenshot where i have only one network attached to my
>> HE which is ovirtmgmt.
>>
>>
>> Then I proceeded to configure bonding for the storage domain, bonding 2
>> NICs at each server. When trying to set a custom bond of mode=6 (as
>> recommended from gluster) I received a warning that mode0, 5 and 6 cannot
>> be configured since the interface is used from VMs. I also understood that
>> having the storage network assigned to VMs makes it a bridge which
>> decreases performance of networking. When trying to remove the network
>> interface from engine it cannot be done, since the engine is running.
>>
>> 2nd question: Is there a way I can remove the secondary storage network
>> interface from the engine?
>>
>> Many thanx
>>
>>
>> _______________________________________________
>> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>
>>
12:29 a.m.
This is a multi-part message in MIME format.
--------------1EF5E87F75A716DDFC387F61
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
On 06/27/2017 09:49 PM, Abi Askushi wrote:
Hi all,
Just in case ones needs it, in order to remove the secondary network
interface from engine, you can go to:
Virtual Machines -> Hostedengine -> Network Interfaces -> edit ->
unplug it -> confirm -> remove it.
cool. But in your previous mail you did
mention that it fails for you
since the engine is running. Instead of remove you tried unplug here ?
It was simple...
On Tue, Jun 27, 2017 at 4:54 PM, Abi Askushi <rightkicktech(a)gmail.com
<mailto:rightkicktech@gmail.com>> wrote:
Hi Knarra,
Then I had already enabled NFS on ISO gluster volume.
Maybe i had some networking issue then. I need to remove the
secondary interface in order to test that again.
On Tue, Jun 27, 2017 at 4:25 PM, knarra <knarra(a)redhat.com
<mailto:knarra@redhat.com>> wrote:
On 06/27/2017 06:34 PM, Abi Askushi wrote:
> Hi Knarra,
>
> The ISO domain is of type gluster though I had nfs enabled on
> that volume.
you need to have nfs enabled on the volume. what i meant is
nfs.disable off which means nfs is on.
For more info please refer to bug
https://bugzilla.redhat.com/show_bug.cgi?id=1437799
<https://bugzilla.redhat.com/show_bug.cgi?id=1437799>
> I will disable the nfs and try. Though in order to try I need
> first to remove that second interface from engine.
> Is there a way I can remove the secondary storage network
> interface from the engine?
I am not sure how to do that, but you may shutdown the vm
using the command hosted-engine --vm-shutdown which will power
off the vm and try to remove the networks using vdsclient.
(not sure if this is right, but suggesting a way)
>
> Thanx
>
> On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com
> <mailto:knarra@redhat.com>> wrote:
>
> On 06/27/2017 05:41 PM, Abi Askushi wrote:
>> Hi all,
>>
>> When setting up hosted engine setup on top gluster with
>> 3 nodes, I had gluster configured on a separate network
>> interface, as recommended. When I tried later to upload
>> ISO from engine to ISO domain, the engine was not able
>> to upload it since the VM did not have access to the
>> separate storage network. I then added the storage
>> network interface to the hosted engine and ISO upload
>> succeeded.
> May i know what was the volume type created and added as
> ISO domain ?
>
> If you plan to use a glusterfs volume below is the
> procedure :
>
> 1) Create a glusterfs volume.
> 2) While adding storage domain select Domain Function as
> 'ISO' and Storage Type as 'glusterfs' .
> 3) You can either use 'use managed gluster volume' check
> box and select the gluster volume which you have created
> for storing ISO's or you can type the full path of the
> volume.
> 4) Once this is added please make sure to set the option
> nfs.disable off.
> 5) Now you can go to HE engine and run the command
> engine-iso-uploader upload -i <gluster_iso_domain_name>
> <iso_file>
>
> Iso gets uploaded successfully.
>
>>
>> 1st question: do I need to add the network interface to
>> engine in order to upload ISOs? does there exist any
>> alternate way?
> AFAIK, this is not required when glusterfs volume is used.
>
> Attached is the screenshot where i have only one network
> attached to my HE which is ovirtmgmt.
>>
>> Then I proceeded to configure bonding for the storage
>> domain, bonding 2 NICs at each server. When trying to
>> set a custom bond of mode=6 (as recommended from
>> gluster) I received a warning that mode0, 5 and 6 cannot
>> be configured since the interface is used from VMs. I
>> also understood that having the storage network assigned
>> to VMs makes it a bridge which decreases performance of
>> networking. When trying to remove the network interface
>> from engine it cannot be done, since the engine is running.
>>
>> 2nd question: Is there a way I can remove the secondary
>> storage network interface from the engine?
>>
>> Many thanx
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>
--------------1EF5E87F75A716DDFC387F61
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">On 06/27/2017 09:49 PM, Abi Askushi
wrote:<br>
</div>
<blockquote
cite="mid:CABMULtJ1t7DzewdFmEyj1nPUypAjxN3DvWgWJBPq9d5LGW1jxQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>
<div>
<div>Hi all, <br>
<br>
</div>
Just in case ones needs it, in order to remove the secondary
network interface from engine, you can go to: <br>
</div>
Virtual Machines -> Hostedengine -> Network Interfaces
-> edit -> unplug it -> confirm -> remove it.
<br>
</div>
</div>
</blockquote>
cool. But in your previous mail you did mention that it fails for
you since the engine is running. Instead of remove you tried unplug
here ?<br>
<blockquote
cite="mid:CABMULtJ1t7DzewdFmEyj1nPUypAjxN3DvWgWJBPq9d5LGW1jxQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div><br>
</div>
It was simple...<br>
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, Jun 27, 2017 at 4:54 PM, Abi
Askushi <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:rightkicktech@gmail.com"
target="_blank">rightkicktech(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>
<div>
<div>
<div>Hi Knarra, <br>
<br>
</div>
Then I had already enabled NFS on ISO gluster
volume. <br>
</div>
Maybe i had some networking issue then. I need to
remove the secondary interface in order to test that
again. <br>
<br>
</div>
</div>
<div>
<div>
<div><br>
</div>
</div>
</div>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, Jun 27, 2017 at 4:25
PM, knarra <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:knarra@redhat.com"
target="_blank">knarra(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF"
text="#000000"><span>
<div
class="m_889488259470675464m_-5677008902476285395moz-cite-prefix">On
06/27/2017 06:34 PM, Abi Askushi wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div>Hi Knarra, <br>
<br>
</div>
The ISO domain is of type gluster
though I had nfs enabled on that
volume. <br>
</div>
</div>
</div>
</blockquote>
</span> you need to have nfs enabled on the
volume. what i meant is nfs.disable off which
means nfs is on.<br>
<br>
For more info please refer to bug <a
moz-do-not-send="true"
class="m_889488259470675464m_-5677008902476285395moz-txt-link-freetext"
href="https://bugzilla.redhat.com/show_bug.cgi?id=1437799"
target="_blank">https://bugzilla.redhat.com/sh<wbr>ow_...
<blockquote type="cite">
<div dir="ltr">
<div>I will disable the nfs and try.
Though in order to try I need first to
remove that second interface from
engine. <br>
<span
class="m_889488259470675464m_-5677008902476285395gmail-im">Is
there a way I can remove the secondary
storage network interface from the
engine?<br>
</span></div>
</div>
</blockquote>
</span> I am not sure how to do that, but you
may shutdown the vm using the command
hosted-engine --vm-shutdown which will power off
the vm and try to remove the networks using
vdsclient. (not sure if this is right, but
suggesting a way)<span><br>
<blockquote type="cite">
<div dir="ltr">
<div><span
class="m_889488259470675464m_-5677008902476285395gmail-im"><br>
</span></div>
<span
class="m_889488259470675464m_-5677008902476285395gmail-im">Thanx<br>
</span></div>
</blockquote>
<br>
<blockquote type="cite">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, Jun 27,
2017 at 3:32 PM, knarra <span
dir="ltr"><<a
moz-do-not-send="true"
href="mailto:knarra@redhat.com"
target="_blank">knarra(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0
.8ex;border-left:1px #ccc
solid;padding-left:1ex">
<div bgcolor="#FFFFFF"
text="#000000"><span>
<div
class="m_889488259470675464m_-5677008902476285395m_-6805624692919781363moz-cite-prefix">On
06/27/2017 05:41 PM, Abi Askushi
wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div>
<div>Hi all, <br>
<br>
</div>
When setting up hosted
engine setup on top
gluster with 3 nodes, I
had gluster configured
on a separate network
interface, as
recommended. When I
tried later to upload
ISO from engine to ISO
domain, the engine was
not able to upload it
since the VM did not
have access to the
separate storage
network. I then added
the storage network
interface to the hosted
engine and ISO upload
succeeded. <br>
</div>
</div>
</div>
</div>
</blockquote>
</span> May i know what was the
volume type created and added as ISO
domain ?<br>
<br>
If you plan to use a glusterfs
volume below is the procedure :<br>
<br>
1) Create a glusterfs volume.<br>
2) While adding storage domain
select Domain Function as 'ISO' and
Storage Type as 'glusterfs' .<br>
3) You can either use 'use managed
gluster volume' check box and select
the gluster volume which you have
created for storing ISO's or you can
type the full path of the volume.<br>
4) Once this is added please make
sure to set the option nfs.disable
off.<br>
5) Now you can go to HE engine and
run the command engine-iso-uploader
upload -i
<gluster_iso_domain_name>
<iso_file><br>
<br>
Iso gets uploaded successfully.<span><br>
<br>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>
<div><br>
</div>
1st question: do I need to
add the network interface
to engine in order to
upload ISOs? does there
exist any alternate way?<br>
</div>
</div>
</div>
</blockquote>
</span> AFAIK, this is not required
when glusterfs volume is used.<br>
<br>
Attached is the screenshot where i
have only one network attached to my
HE which is ovirtmgmt.<br>
<blockquote type="cite"><span>
<div dir="ltr">
<div>
<div><br>
</div>
Then I proceeded to
configure bonding for the
storage domain, bonding 2
NICs at each server. When
trying to set a custom bond
of mode=6 (as recommended
from gluster) I received a
warning that mode0, 5 and 6
cannot be configured since
the interface is used from
VMs. I also understood that
having the storage network
assigned to VMs makes it a
bridge which decreases
performance of networking.
When trying to remove the
network interface from
engine it cannot be done,
since the engine is running.
<br>
<br>
2nd question: Is there a way
I can remove the secondary
storage network interface
from the engine?<br>
<br>
</div>
Many thanx<br>
</div>
<br>
<fieldset
class="m_889488259470675464m_-5677008902476285395m_-6805624692919781363mimeAttachmentHeader"></fieldset>
<br>
</span>
<pre>______________________________<wbr>_________________
Users mailing list
<a moz-do-not-send="true"
class="m_889488259470675464m_-5677008902476285395m_-6805624692919781363moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a>
<a moz-do-not-send="true"
class="m_889488259470675464m_-5677008902476285395m_-6805624692919781363moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman<wbr>/li...
</pre>
</blockquote>
<p>
</p>
</div>
</blockquote></div>
</div>
</blockquote><p>
</p></span></div></blockquote></div>
</div>
</div></div></blockquote></div>
</div>
</blockquote><p>
</p></body></html>
--------------1EF5E87F75A716DDFC387F61--
2:06 a.m.
Hi,
I was trying to remove the nic from the edit menu of the VM and that failed.
I had to unplug the nic first to be able to remove it from the network
interfaces submenu of the vm.
On Jun 28, 2017 08:29, "knarra" <knarra(a)redhat.com> wrote:
On 06/27/2017 09:49 PM, Abi Askushi wrote:
Hi all,
Just in case ones needs it, in order to remove the secondary network
interface from engine, you can go to:
Virtual Machines -> Hostedengine -> Network Interfaces -> edit -> unplug
it -> confirm -> remove it.
cool. But in your previous mail you did mention that it fails for you
since the engine is running. Instead of remove you tried unplug here ?
It was simple...
On Tue, Jun 27, 2017 at 4:54 PM, Abi Askushi <rightkicktech(a)gmail.com>
wrote:
> Hi Knarra,
>
> Then I had already enabled NFS on ISO gluster volume.
> Maybe i had some networking issue then. I need to remove the secondary
> interface in order to test that again.
>
>
>
> On Tue, Jun 27, 2017 at 4:25 PM, knarra <knarra(a)redhat.com> wrote:
>
>> On 06/27/2017 06:34 PM, Abi Askushi wrote:
>>
>> Hi Knarra,
>>
>> The ISO domain is of type gluster though I had nfs enabled on that
>> volume.
>>
>> you need to have nfs enabled on the volume. what i meant is nfs.disable
>> off which means nfs is on.
>>
>> For more info please refer to bug https://bugzilla.redhat.com/sh
>> ow_bug.cgi?id=1437799
>>
>> I will disable the nfs and try. Though in order to try I need first to
>> remove that second interface from engine.
>> Is there a way I can remove the secondary storage network interface from
>> the engine?
>>
>> I am not sure how to do that, but you may shutdown the vm using the
>> command hosted-engine --vm-shutdown which will power off the vm and try to
>> remove the networks using vdsclient. (not sure if this is right, but
>> suggesting a way)
>>
>>
>> Thanx
>>
>>
>>
>> On Tue, Jun 27, 2017 at 3:32 PM, knarra <knarra(a)redhat.com> wrote:
>>
>>> On 06/27/2017 05:41 PM, Abi Askushi wrote:
>>>
>>> Hi all,
>>>
>>> When setting up hosted engine setup on top gluster with 3 nodes, I had
>>> gluster configured on a separate network interface, as recommended. When I
>>> tried later to upload ISO from engine to ISO domain, the engine was not
>>> able to upload it since the VM did not have access to the separate storage
>>> network. I then added the storage network interface to the hosted engine
>>> and ISO upload succeeded.
>>>
>>> May i know what was the volume type created and added as ISO domain ?
>>>
>>> If you plan to use a glusterfs volume below is the procedure :
>>>
>>> 1) Create a glusterfs volume.
>>> 2) While adding storage domain select Domain Function as 'ISO' and
>>> Storage Type as 'glusterfs' .
>>> 3) You can either use 'use managed gluster volume' check box and
select
>>> the gluster volume which you have created for storing ISO's or you can
type
>>> the full path of the volume.
>>> 4) Once this is added please make sure to set the option nfs.disable
>>> off.
>>> 5) Now you can go to HE engine and run the command engine-iso-uploader
>>> upload -i <gluster_iso_domain_name> <iso_file>
>>>
>>> Iso gets uploaded successfully.
>>>
>>>
>>> 1st question: do I need to add the network interface to engine in order
>>> to upload ISOs? does there exist any alternate way?
>>>
>>> AFAIK, this is not required when glusterfs volume is used.
>>>
>>> Attached is the screenshot where i have only one network attached to my
>>> HE which is ovirtmgmt.
>>>
>>>
>>> Then I proceeded to configure bonding for the storage domain, bonding 2
>>> NICs at each server. When trying to set a custom bond of mode=6 (as
>>> recommended from gluster) I received a warning that mode0, 5 and 6 cannot
>>> be configured since the interface is used from VMs. I also understood that
>>> having the storage network assigned to VMs makes it a bridge which
>>> decreases performance of networking. When trying to remove the network
>>> interface from engine it cannot be done, since the engine is running.
>>>
>>> 2nd question: Is there a way I can remove the secondary storage network
>>> interface from the engine?
>>>
>>> Many thanx
>>>
>>>
>>> _______________________________________________
>>> Users mailing
listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
2502
days inactive
2503
days old
7 comments
2 participants
participants (2)
-
Abi Askushi -
knarra