Not Enough Mac address pool
HI, When deploying a vm from template ,getting the below error,anyways to resolve the issue ? Not enough MAC addresses left in MAC Address Pool. Thanks, Nagaraju
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions. Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
HI Rafael, I found the configure option but didn't find the option to increase the Mac address pool. can you please help me ? Thanks, Nagaraju On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase the Mac address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range. Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
I'm using 3.5 version and getting below options and able to get the options Mac address pools Roles System Permissions Cluster Policies Instance Type. Thanks, Nagaraju On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase the Mac address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range.
Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hi Budur On 3.5 you should increase or create the MAC pool range via the engine-config: Example: engine-config -s MacPoolRanges=00:00:00:00:00:00-FF:FF:FF:FF:FF:FF restart engine service Good luck On Wed, Jan 11, 2017 at 1:57 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
I'm using 3.5 version and getting below options and able to get the options Mac address pools
Roles System Permissions Cluster Policies Instance Type.
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase the Mac address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range.
Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Getting the below error [root@pscloud ~]# engine-config -s MacpoolRanges=00:1A:4A:22:39:00-00:1A:4A:22:39:FF Error setting MacpoolRanges's value. No such entry. [root@pscloud ~]# On Wed, Jan 11, 2017 at 5:51 PM, Michael Burman <mburman@redhat.com> wrote:
Hi Budur
On 3.5 you should increase or create the MAC pool range via the engine-config:
Example: engine-config -s MacPoolRanges=00:00:00:00:00:00-FF:FF:FF:FF:FF:FF restart engine service
Good luck
On Wed, Jan 11, 2017 at 1:57 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
I'm using 3.5 version and getting below options and able to get the options Mac address pools
Roles System Permissions Cluster Policies Instance Type.
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins <rmartins@redhat.com> wrote:
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase
----- Original Message ----- the Mac
address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range.
Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message -----
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 11:16:19 AM Subject: [ovirt-users] Not Enough Mac address pool
HI,
When deploying a vm from template ,getting the below error,anyways to resolve the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
Not enough MAC addresses left in MAC Address Pool.
Thanks, Nagaraju
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
My bad, had a typo, try: engine-config -s MacPoolRanges=00:1A:4A:22:39:00-00:1A:4A:22:39:FF On Wed, Jan 11, 2017 at 2:34 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
Getting the below error
[root@pscloud ~]# engine-config -s MacpoolRanges=00:1A:4A:22:39: 00-00:1A:4A:22:39:FF Error setting MacpoolRanges's value. No such entry. [root@pscloud ~]#
On Wed, Jan 11, 2017 at 5:51 PM, Michael Burman <mburman@redhat.com> wrote:
Hi Budur
On 3.5 you should increase or create the MAC pool range via the engine-config:
Example: engine-config -s MacPoolRanges=00:00:00:00:00:00-FF:FF:FF:FF:FF:FF restart engine service
Good luck
On Wed, Jan 11, 2017 at 1:57 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
I'm using 3.5 version and getting below options and able to get the options Mac address pools
Roles System Permissions Cluster Policies Instance Type.
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins <rmartins@redhat.com> wrote:
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase
----- Original Message ----- the Mac
address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range.
Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
----- Original Message ----- > From: "Budur Nagaraju" <nbudoor@gmail.com> > To: "users" <users@ovirt.org> > Sent: Wednesday, January 11, 2017 11:16:19 AM > Subject: [ovirt-users] Not Enough Mac address pool > > HI, > > When deploying a vm from template ,getting the below error,anyways to resolve > the issue ?
It seems that you (or any other administrator) configured the engine to use a specific range of mac addresses for your virtual machines, and this range was not enough for the number of vms you want to use. you need to add a new range of mac addresses or expand the existing one, if possible. You can find this settings on the "Configure" menu, right top of ovirt engine admin portal, if you have the required permissions.
Rafael
> Not enough MAC addresses left in MAC Address Pool. > > Thanks, > Nagaraju > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Actually it's your typo, you should have P instead of p On Wed, Jan 11, 2017 at 2:39 PM, Michael Burman <mburman@redhat.com> wrote:
My bad, had a typo, try: engine-config -s MacPoolRanges=00:1A:4A:22:39:00-00:1A:4A:22:39:FF
On Wed, Jan 11, 2017 at 2:34 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
Getting the below error
[root@pscloud ~]# engine-config -s MacpoolRanges=00:1A:4A:22:39:0 0-00:1A:4A:22:39:FF Error setting MacpoolRanges's value. No such entry. [root@pscloud ~]#
On Wed, Jan 11, 2017 at 5:51 PM, Michael Burman <mburman@redhat.com> wrote:
Hi Budur
On 3.5 you should increase or create the MAC pool range via the engine-config:
Example: engine-config -s MacPoolRanges=00:00:00:00:00:00-FF:FF:FF:FF:FF:FF restart engine service
Good luck
On Wed, Jan 11, 2017 at 1:57 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
I'm using 3.5 version and getting below options and able to get the options Mac address pools
Roles System Permissions Cluster Policies Instance Type.
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 5:16 PM, Rafael Martins <rmartins@redhat.com> wrote:
From: "Budur Nagaraju" <nbudoor@gmail.com> To: "Rafael Martins" <rmartins@redhat.com> Cc: "users" <users@ovirt.org> Sent: Wednesday, January 11, 2017 12:39:55 PM Subject: Re: [ovirt-users] Not Enough Mac address pool
HI Rafael,
I found the configure option but didn't find the option to increase
----- Original Message ----- the Mac
address pool. can you please help me ?
This option opens a dialog, with a lateral menu of tabs. one of those tabs is "MAC Address Pools". just go there and add your new range.
Rafael
Thanks, Nagaraju
On Wed, Jan 11, 2017 at 4:57 PM, Rafael Martins <rmartins@redhat.com> wrote:
> ----- Original Message ----- > > From: "Budur Nagaraju" <nbudoor@gmail.com> > > To: "users" <users@ovirt.org> > > Sent: Wednesday, January 11, 2017 11:16:19 AM > > Subject: [ovirt-users] Not Enough Mac address pool > > > > HI, > > > > When deploying a vm from template ,getting the below error,anyways to > resolve > > the issue ? > > It seems that you (or any other administrator) configured the engine to > use a specific range of mac addresses for your virtual machines, and this > range was not enough for the number of vms you want to use. you need to add > a new range of mac addresses or expand the existing one, if possible. You > can find this settings on the "Configure" menu, right top of ovirt engine > admin portal, if you have the required permissions. > > Rafael > > > Not enough MAC addresses left in MAC Address Pool. > > > > Thanks, > > Nagaraju > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
participants (3)
-
Budur Nagaraju -
Michael Burman -
Rafael Martins