3:22 p.m.
Fwd'g to list to continue to thread...
-----Original Message-----
From: Will Dennis
Sent: Wednesday, June 08, 2016 11:55 AM
To: 'Simone Tiraboschi'
Subject: RE: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt
VM
OK, I did, and... Still not getting DHCP IP's assigned on the containers running in
the VM...
Again, I see the DHCP packets coming in on the 'vnet0' int on the oVirt hypervisor
hosts having the VM which has the containers:
[root@ovirt-node-03 ~]# tcpdump -i vnet0 -vvv -s 1500 '(port 67 or port 68)'
11:13:38.689970 IP (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17),
length 328)
0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from
32:33:32:64:30:65 (oui Unknown), length 300, xid 0xd0f70f67, secs 247, Flags [none]
(0x0000)
Client-Ethernet-Address 32:33:32:64:30:65 (oui Unknown)
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Discover
Hostname Option 12, length 9: "blitsnorp"
Parameter-Request Option 55, length 13:
Subnet-Mask, BR, Time-Zone, Default-Gateway
Domain-Name, Domain-Name-Server, Option 119, Hostname
Netbios-Name-Server, Netbios-Scope, MTU, Classless-Static-Route
NTP
END Option 255, length 0
PAD Option 0, length 0, occurs 30
But I do not see the MAC from the container in the relevant oVirt bridge that the VM is
connected to (in this case, port 3 on the bridge):
[root@ovirt-node-03 ~]# brctl showmacs 207-net | grep "^ 3"
3 00:1a:4a:16:01:57 no 0.13 (VM eth0 MAC)
3 fe:1a:4a:16:01:57 yes 0.00 (veth connection from VM)
3 fe:1a:4a:16:01:57 yes 0.00 (why are two showing???)
(notice no entry for MAC 32:33:32:64:30:65 from the container on the VM)
-----Original Message-----
From: Simone Tiraboschi [mailto:stirabos@redhat.com]
Sent: Wednesday, June 08, 2016 10:54 AM
To: Will Dennis
Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt
VM
On Wed, Jun 8, 2016 at 4:50 PM, Will Dennis <wdennis(a)nec-labs.com> wrote:
OK, installed on all hypervisor hosts (and the engine host as well) -
do I need to bounce the VMs having containers now, or not?
Yes, of course: you have to reboot all the involved VMs.
-----Original Message-----
From: Simone Tiraboschi [mailto:stirabos@redhat.com]
Sent: Wednesday, June 08, 2016 10:44 AM
To: Will Dennis
Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt
VM
On Wed, Jun 8, 2016 at 4:38 PM, Will Dennis <wdennis(a)nec-labs.com> wrote:
> OK. This goes on just the engine host, or on the hypervisor hosts? (or both?)
On all the hosted-engine hosts
> Also (and not trying to be insulting here), is this documented anywhere? I didn't
run across this dependency in anything I read...
Good question
> -----Original Message-----
> From: Simone Tiraboschi [mailto:stirabos@redhat.com]
> Sent: Wednesday, June 08, 2016 10:31 AM
> To: Will Dennis
> Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a
oVirt VM
>
> On Wed, Jun 8, 2016 at 4:27 PM, Will Dennis <wdennis(a)nec-labs.com> wrote:
>> No, I didn't see (notice) that step / instructions anywhere... How to do
that?
>>
>> -----Original Message-----
>> From: Simone Tiraboschi [mailto:stirabos@redhat.com]
>> Sent: Wednesday, June 08, 2016 10:23 AM
>> To: Will Dennis
>> Cc: jvdwege(a)xs4all.nl; users(a)ovirt.org; Michal Skrivanek
>> Subject: Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in
a oVirt VM
>>
>>
>> Did you also correctly installed vdsm-hook-macspoof on all of your hosted-engine
hosts?
>
> yum install vdsm-hook-macspoof
2878
days inactive
2878
days old
0 comments
1 participants
participants (1)
-
Will Dennis