
--_000_D159E0274ED4soerenmalchowmconnet_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hi Bill, First, i would strongly suggest that you check whether the interfaces are e= xplcicitly NOT managed by NetworkManager, thats the way we do it. We have something like this =97 DEVICE=3Dovirtmgmt TYPE=3DBridge DELAY=3D0 STP=3Doff ONBOOT=3Dyes IPADDR=3D NETMASK=3D GATEWAY=3D BOOTPROTO=3Dnone DEFROUTE=3Dyes NM_CONTROLLED=3Dno HOTPLUG=3Dno ---- And =97 DEVICE=3Dbond0 BONDING_OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad xmit_= hash_policy=3Dlayer3+4' BRIDGE=3Dovirtmgmt ONBOOT=3Dyes NM_CONTROLLED=3Dno HOTPLUG=3Dno --- Physical interfaces =97 DEVICE=3Dp3p3 HWADDR=3D MASTER=3Dbond0 SLAVE=3Dyes ONBOOT=3Dyes MTU=3D1500 NM_CONTROLLED=3Dno =97 And we actually create all the interfaces BEFORE ovirt installation even th= ough the files will be regenerated after installing and configuring ovirt (= vdsm) That works like a charm for us Cheers Soeren From: Bill Dossett <Bill.Dossett@pb.com<mailto:Bill.Dossett@pb.com>> Date: Thursday 16 April 2015 21:49 To: "users@ovirt.org<mailto:users@ovirt.org>" <users@ovirt.org<mailto:users= @ovirt.org>> Subject: [ovirt-users] bonding interfaces Hi, I had a Gluster Cluster running that I setup with oVirt engine=85 =93had=94= being the operative word here. Today I connected the second network interface and then went to the host an= d tried to bond this interface to the ovirt mgmt. network=85 this is where = the =93had=94 part comes in ;-) Now I have no working interfaces at all, can=92t ping in or out and all int= erfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (= this is centos7) I have done this quite a few times on RHEV clusters and it always worked we= ll, very impressed with it. The differences are=85 RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that=92s it. I haven=92t really dug into the /etc/sysconfig/network-scripts to see what = normally goes into the config files to create a bonded interface =96 only t= o see how to configure my first interface with a vlan and then I let ovirte= ngine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips = on fixing it. It=92s just PoC anyway, so learning. Thanks Bill Dossett Systems Architect Tech Central =96 Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.dossett@pb.com<mailto:bill.dossett@pb.com> pitneybowes.com<http://pitneybowes.com/> Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HERE<applewebdata://5D25CA10-0BA9-4233-= 9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Inc= ident/newIncident.aspx>] takes less than a minute CloudForms User Guide available [HERE<https://dl.dropboxusercontent.com/u/6= 219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf>] ________________________________ --_000_D159E0274ED4soerenmalchowmconnet_ Content-Type: text/html; charset="Windows-1252" Content-ID: <42A3D06613151E4C827129CE3CF4D8DE@liquidcampaign.com> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin= e-break: after-white-space; color: rgb(0, 0, 0); font-size: 14px; font-fami= ly: Calibri, sans-serif;"> <div>Hi Bill,</div> <div><br> </div> <div>First, i would strongly suggest that you check whether the interfaces = are explcicitly NOT managed by NetworkManager, thats the way we do it.</div=
</o:p></p> <p class=3D"MsoNormal">RHEV I was using 6.4 or 6.5 RHEL <o:p></o:p></=
<span style=3D"color:#0082D5">HERE</span></a></span>]<span style=3D"color:= blue"> </span>takes less than a minute</span></b><span style=3D"mso-fareast-language:EN-GB"><o= :p></o:p></span></p> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;"> </span></b><span style=3D"mso-fareast-language:EN-GB"= <o:p></o:p></span></p> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;">CloudForms User Guide available</span></b><span style=3D"fo= nt-size: 10pt; font-family: Arial, sans-serif;"> [<b><span style=3D"co= lor:#0082D5"><a href=3D"https://dl.dropboxusercontent.com/u/6219441/ManageI= Q%20-%20User%20Manual%20PB%20v5.pdf"><span style=3D"color:#0082D5">HERE</sp= an></a></span></b>]</span><span style=3D"mso-fareast-language:EN-GB"><o:p><= /o:p></span></p> </td> </tr> </tbody> </table> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"><o:p>&nbs=
<div><br> </div> <div>We have something like this</div> <div><br> </div> <div>=97</div> <div><br> </div> <div> <div>DEVICE=3Dovirtmgmt</div> <div>TYPE=3DBridge</div> <div>DELAY=3D0</div> <div>STP=3Doff</div> <div>ONBOOT=3Dyes</div> <div>IPADDR=3D</div> <div>NETMASK=3D</div> <div>GATEWAY=3D</div> <div>BOOTPROTO=3Dnone</div> <div>DEFROUTE=3Dyes</div> <div>NM_CONTROLLED=3Dno</div> <div>HOTPLUG=3Dno</div> </div> <div><br> </div> <div>----</div> <div><br> </div> <div>And</div> <div><br> </div> <div>=97</div> <div> <div>DEVICE=3Dbond0</div> <div>BONDING_OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad = xmit_hash_policy=3Dlayer3+4'</div> <div>BRIDGE=3Dovirtmgmt</div> <div>ONBOOT=3Dyes</div> <div>NM_CONTROLLED=3Dno</div> <div>HOTPLUG=3Dno</div> </div> <div>---</div> <div><br> </div> <div>Physical interfaces</div> <div><br> </div> <div>=97</div> <div><br> </div> <div> <div>DEVICE=3Dp3p3</div> <div>HWADDR=3D</div> <div>MASTER=3Dbond0</div> <div>SLAVE=3Dyes</div> <div>ONBOOT=3Dyes</div> <div>MTU=3D1500</div> <div>NM_CONTROLLED=3Dno</div> </div> <div><br> </div> <div>=97</div> <div><br> </div> <div>And we actually create all the interfaces BEFORE ovirt installation ev= en though the files will be regenerated after installing and configuring ov= irt (vdsm)</div> <div><br> </div> <div>That works like a charm for us</div> <div><br> </div> <div>Cheers</div> <div>Soeren </div> <div><br> </div> <div><br> </div> <span id=3D"OLK_SRC_BODY_SECTION"> <div style=3D"font-family:Calibri; font-size:11pt; text-align:left; color:b= lack; BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; PADDING-BOTTOM:= 0in; PADDING-LEFT: 0in; PADDING-RIGHT: 0in; BORDER-TOP: #b5c4df 1pt solid;= BORDER-RIGHT: medium none; PADDING-TOP: 3pt"> <span style=3D"font-weight:bold">From: </span>Bill Dossett <<a href=3D"m= ailto:Bill.Dossett@pb.com">Bill.Dossett@pb.com</a>><br> <span style=3D"font-weight:bold">Date: </span>Thursday 16 April 2015 21:49<= br> <span style=3D"font-weight:bold">To: </span>"<a href=3D"mailto:users@o= virt.org">users@ovirt.org</a>" <<a href=3D"mailto:users@ovirt.org">= users@ovirt.org</a>><br> <span style=3D"font-weight:bold">Subject: </span>[ovirt-users] bonding inte= rfaces<br> </div> <div><br> </div> <div xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micro= soft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" x= mlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:/= /www.w3.org/TR/REC-html40"> <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style><!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0cm; margin-bottom:.0001pt; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} a:link, span.MsoHyperlink {mso-style-priority:99; color:#0563C1; text-decoration:underline;} a:visited, span.MsoHyperlinkFollowed {mso-style-priority:99; color:#954F72; text-decoration:underline;} span.EmailStyle17 {mso-style-type:personal-compose; font-family:"Calibri","sans-serif"; color:windowtext;} .MsoChpDefault {mso-style-type:export-only; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} @page WordSection1 {size:612.0pt 792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt;} div.WordSection1 {page:WordSection1;} --></style><!--[if gte mso 9]><xml> <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" /> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext=3D"edit"> <o:idmap v:ext=3D"edit" data=3D"1" /> </o:shapelayout></xml><![endif]--> <div lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hi,<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I had a Gluster Cluster running that I setup with oV= irt engine=85 =93had=94 being the operative word here.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Today I connected the second network interface and t= hen went to the host and tried to bond this interface to the ovirt mgmt. ne= twork=85 this is where the =93had=94 part comes in ;-)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Now I have no working interfaces at all, can=92t pin= g in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond= 0 when I do an ip add (this is centos7)<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I have done this quite a few times on RHEV clusters = and it always worked well, very impressed with it. <o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">The differences are=85<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">RHEV cluster I was using trunked ports and VLANS<o:p= p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I think that=92s it.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I haven=92t really dug into the /etc/sysconfig/netwo= rk-scripts to see what normally goes into the config files to create a bond= ed interface =96 only to see how to configure my first interface with a vla= n and then I let ovirtengine do the rest for me as it worked so wellI<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I guess I may have to rip it out and start over unle= ss anyone has any tips on fixing it. It=92s just PoC anyway, so learn= ing.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Thanks<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <table class=3D"MsoNormalTable" border=3D"0" cellspacing=3D"0" cellpadding= =3D"0" width=3D"1280" style=3D"width:960.0pt"> <tbody> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif; color: rgb(0, 130, 213);">Bill Dossett</span></b><span style= =3D"mso-fareast-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size: 10pt; font-family: Arial, = sans-serif;">Systems Architect</span><span style=3D"mso-fareast-language:EN= -GB"><o:p></o:p></span></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;">Tech Central =96 Global Engineering Services</span></b><spa= n style=3D"mso-fareast-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;mso-fareast-language= :EN-GB"> </span><span style=3D"mso-fareast-language:EN-GB"><o:p></o:p>= </span></p> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;">T</span></b><span style=3D"font-size: 10pt; font-family: Ar= ial, sans-serif;"> +1 303 440 3523</span><span style=3D"mso-fareas= t-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;">M</span></b><span style=3D"font-size: 10pt; font-family: Ar= ial, sans-serif;"> +44 (0)777 590 8612</span><span style=3D"mso-fa= reast-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"><a href= =3D"mailto:bill.dossett@pb.com"><span style=3D"color:#954F72">bill.dossett@= pb.com</span></a><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"><a href= =3D"http://pitneybowes.com/"><span style=3D"color:#954F72">pitneybowes.com<= /span></a><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;mso-fareast-language= :EN-GB"><br> </span><b><span style=3D"font-size: 10pt; font-family: Arial, sans-serif;">= Pitney Bowes</span></b><span style=3D"mso-fareast-language:EN-GB"><o:p></o:= p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size: 10pt; font-family: Arial, = sans-serif;">4750 Walnut Street | Boulder, Colorado, 80301 | USA</span><spa= n style=3D"mso-fareast-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size: 10pt; font-family: Arial, = sans-serif;"> </span><span style=3D"mso-fareast-language:EN-GB"><o:p><= /o:p></span></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"> <o:= p></o:p></span></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal" style=3D"page-break-after:avoid"><span style=3D"font= -size: 10pt; font-family: Arial, sans-serif;">In Engineering?</span><span s= tyle=3D"mso-fareast-language:EN-GB"><o:p></o:p></span></p> <p class=3D"MsoNormal"><b><span style=3D"font-size: 10pt; font-family: Aria= l, sans-serif;">Raise a ticket via Remedy Anywhere [<span style=3D"color:#0= 082D5"><a href=3D"applewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teams= ite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx"= p;</o:p></span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> <br> <hr> <font face=3D"Arial" color=3D"Black" size=3D"2"><br> </font></div> </div> </span> </body> </html> --_000_D159E0274ED4soerenmalchowmconnet_--

--_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, no network manager... I have been sort of doing what you describe. I c= reate my first interface manually with a minimum configuration (when I was = first testing ovirt, I was using trunked ports and vlans, so had to do all = that manually) then add the host to ovirt-engine and it did it's magic and = bonded interfaces for me.. I'm going to try a later release I think as it s= eems there may have been a bug like this in 3.5.1. Thank you From: Soeren Malchow [mailto:soeren.malchow@mcon.net] Sent: 19 April 2015 14:48 To: Bill Dossett; users@ovirt.org Subject: Re: [ovirt-users] bonding interfaces Hi Bill, First, i would strongly suggest that you check whether the interfaces are e= xplcicitly NOT managed by NetworkManager, thats the way we do it. We have something like this - DEVICE=3Dovirtmgmt TYPE=3DBridge DELAY=3D0 STP=3Doff ONBOOT=3Dyes IPADDR=3D NETMASK=3D GATEWAY=3D BOOTPROTO=3Dnone DEFROUTE=3Dyes NM_CONTROLLED=3Dno HOTPLUG=3Dno ---- And - DEVICE=3Dbond0 BONDING_OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad xmit_= hash_policy=3Dlayer3+4' BRIDGE=3Dovirtmgmt ONBOOT=3Dyes NM_CONTROLLED=3Dno HOTPLUG=3Dno --- Physical interfaces - DEVICE=3Dp3p3 HWADDR=3D MASTER=3Dbond0 SLAVE=3Dyes ONBOOT=3Dyes MTU=3D1500 NM_CONTROLLED=3Dno - And we actually create all the interfaces BEFORE ovirt installation even th= ough the files will be regenerated after installing and configuring ovirt (= vdsm) That works like a charm for us Cheers Soeren From: Bill Dossett <Bill.Dossett@pb.com<mailto:Bill.Dossett@pb.com>> Date: Thursday 16 April 2015 21:49 To: "users@ovirt.org<mailto:users@ovirt.org>" <users@ovirt.org<mailto:users= @ovirt.org>> Subject: [ovirt-users] bonding interfaces Hi, I had a Gluster Cluster running that I setup with oVirt engine... "had" bei= ng the operative word here. Today I connected the second network interface and then went to the host an= d tried to bond this interface to the ovirt mgmt. network... this is where = the "had" part comes in ;-) Now I have no working interfaces at all, can't ping in or out and all inter= faces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (th= is is centos7) I have done this quite a few times on RHEV clusters and it always worked we= ll, very impressed with it. The differences are... RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that's it. I haven't really dug into the /etc/sysconfig/network-scripts to see what no= rmally goes into the config files to create a bonded interface - only to se= e how to configure my first interface with a vlan and then I let ovirtengin= e do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips = on fixing it. It's just PoC anyway, so learning. Thanks Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 bill.dossett@pb.com<mailto:bill.dossett@pb.com> pitneybowes.com<http://pitneybowes.com/> Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HERE<applewebdata://5D25CA10-0BA9-4233-= 9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Inc= ident/newIncident.aspx>] takes less than a minute CloudForms User Guide available [HERE<https://dl.dropboxusercontent.com/u/6= 219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf>] ________________________________ ________________________________ --_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
</p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">We have= something like this<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">—= <o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">DEVICE= =3Dovirtmgmt<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">TYPE=3D= Bridge<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">DELAY= =3D0<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">STP=3Do= ff<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">ONBOOT= =3Dyes<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">IPADDR= =3D<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">NETMASK= =3D<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">GATEWAY= =3D<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">BOOTPRO= TO=3Dnone<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">DEFROUT= E=3Dyes<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">NM_CONT= ROLLED=3Dno<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">HOTPLUG= =3Dno<o:p></o:p></span></p> </div> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">----<o:=
</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">—= <o:p></o:p></span></p> </div> <div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">DEVICE= =3Dbond0<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">BONDING= _OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad xmit_hash_po=
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <!--[if !mso]><style>v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style><![endif]--><style><!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0cm; margin-bottom:.0001pt; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} a:link, span.MsoHyperlink {mso-style-priority:99; color:#0563C1; text-decoration:underline;} a:visited, span.MsoHyperlinkFollowed {mso-style-priority:99; color:#954F72; text-decoration:underline;} span.EmailStyle17 {mso-style-type:personal; font-family:"Calibri","sans-serif"; color:windowtext;} span.EmailStyle18 {mso-style-type:personal-reply; font-family:"Calibri","sans-serif"; color:#1F497D;} .MsoChpDefault {mso-style-type:export-only; font-size:10.0pt;} @page WordSection1 {size:612.0pt 792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt;} div.WordSection1 {page:WordSection1;} --></style><!--[if gte mso 9]><xml> <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" /> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext=3D"edit"> <o:idmap v:ext=3D"edit" data=3D"1" /> </o:shapelayout></xml><![endif]--> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Hi, no network manager= … I have been sort of doing what you describe. I create my firs= t interface manually with a minimum configuration (when I was first testing= ovirt, I was using trunked ports and vlans, so had to do all that manually) then add the host to ovirt-engine and it did = it’s magic and bonded interfaces for me.. I’m going to try a la= ter release I think as it seems there may have been a bug like this in 3.5.= 1.<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D">Thank you<o:p></o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"color:#1F497D"><o:p> </o:p></spa= n></p> <div> <div style=3D"border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm = 0cm 0cm"> <p class=3D"MsoNormal"><b><span lang=3D"EN-US" style=3D"mso-fareast-languag= e:EN-GB">From:</span></b><span lang=3D"EN-US" style=3D"mso-fareast-language= :EN-GB"> Soeren Malchow [mailto:soeren.malchow@mcon.net] <br> <b>Sent:</b> 19 April 2015 14:48<br> <b>To:</b> Bill Dossett; users@ovirt.org<br> <b>Subject:</b> Re: [ovirt-users] bonding interfaces<o:p></o:p></span></p> </div> </div> <p class=3D"MsoNormal"><o:p> </o:p></p> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">Hi Bill= ,</span><span style=3D"font-size:10.5pt;color:black;mso-fareast-language:EN= -GB"><o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">First, = i would strongly suggest that you check whether the interfaces are explcici= tly NOT managed by NetworkManager, thats the way we do it.<o:p></o:p></span= p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">And<o:p= licy=3Dlayer3+4'<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">BRIDGE= =3Dovirtmgmt<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">ONBOOT= =3Dyes<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">NM_CONT= ROLLED=3Dno<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">HOTPLUG= =3Dno<o:p></o:p></span></p> </div> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">---<o:p=
</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">Physica= l interfaces<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">—= <o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">DEVICE= =3Dp3p3<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">HWADDR= =3D<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">MASTER= =3Dbond0<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">SLAVE= =3Dyes<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">ONBOOT= =3Dyes<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">MTU=3D1= 500<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">NM_CONT= ROLLED=3Dno<o:p></o:p></span></p> </div> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">—= <o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">And we = actually create all the interfaces BEFORE ovirt installation even though th= e files will be regenerated after installing and configuring ovirt (vdsm)<o= :p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">That wo= rks like a charm for us<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">Cheers<= o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black">Soeren&= nbsp;<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div style=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm = 0cm 0cm"> <p class=3D"MsoNormal"><b><span style=3D"color:black">From: </span></b><spa= n style=3D"color:black">Bill Dossett <<a href=3D"mailto:Bill.Dossett@pb.= com">Bill.Dossett@pb.com</a>><br> <b>Date: </b>Thursday 16 April 2015 21:49<br> <b>To: </b>"<a href=3D"mailto:users@ovirt.org">users@ovirt.org</a>&quo= t; <<a href=3D"mailto:users@ovirt.org">users@ovirt.org</a>><br> <b>Subject: </b>[ovirt-users] bonding interfaces<o:p></o:p></span></p> </div> <div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"><o:p>&n= bsp;</o:p></span></p> </div> <div> <div> <p class=3D"MsoNormal"><span style=3D"color:black">Hi,<o:p></o:p></span></p=
</o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">I have done this quite a= few times on RHEV clusters and it always worked well, very impressed with = it. <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">The differences are̷= 0;<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">RHEV cluster I was using=
<p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">I had a Gluster Cluster = running that I setup with oVirt engine… “had” being the o= perative word here.<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">Today I connected the se= cond network interface and then went to the host and tried to bond this int= erface to the ovirt mgmt. network… this is where the “had”= ; part comes in ;-)<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">Now I have no working in= terfaces at all, can’t ping in or out and all interfaces say they are= down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7)<o:p= trunked ports and VLANS<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black">RHEV I was using 6.4 or = 6.5 RHEL <o:p> </o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">I think that’s it.= <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">I haven’t really d= ug into the /etc/sysconfig/network-scripts to see what normally goes into t= he config files to create a bonded interface – only to see how to con= figure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI<o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">I guess I may have to ri= p it out and start over unless anyone has any tips on fixing it. It= 8217;s just PoC anyway, so learning.<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black">Thanks<o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <table class=3D"MsoNormalTable" border=3D"0" cellspacing=3D"0" cellpadding= =3D"0" width=3D"1280" style=3D"width:960.0pt"> <tbody> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif";color:#0082D5">Bill Dossett</span></b><= o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial","sans-serif"">Systems Architect</span><o:p></o:p></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif"">Tech Central – Global Engineerin= g Services</span></b><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;mso-fareast-language= :EN-GB"> </span><o:p></o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif"">T</span></b><span style=3D"font-size:1= 0.0pt;font-family:"Arial","sans-serif""> +1 30= 3 440 3523</span><o:p></o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif"">M</span></b><span style=3D"font-size:1= 0.0pt;font-family:"Arial","sans-serif""> +44 (= 0)777 590 8612</span><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"><a href= =3D"mailto:bill.dossett@pb.com"><span style=3D"color:#954F72">bill.dossett@= pb.com</span></a></span><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"><a href= =3D"http://pitneybowes.com/"><span style=3D"color:#954F72">pitneybowes.com<= /span></a></span><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;mso-fareast-language= :EN-GB"><br> </span><b><span style=3D"font-size:10.0pt;font-family:"Arial",&qu= ot;sans-serif"">Pitney Bowes</span></b><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial","sans-serif"">4750 Walnut Street | Boulder, Colorado, 8= 0301 | USA</span><o:p></o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial","sans-serif""> </span><o:p></o:p></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-GB"> </s= pan><o:p></o:p></p> </td> </tr> <tr> <td width=3D"640" style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm"> <p class=3D"MsoNormal" style=3D"page-break-after:avoid"><span style=3D"font= -size:10.0pt;font-family:"Arial","sans-serif"">In Engin= eering?</span><o:p></o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif"">Raise a ticket via Remedy Anywhere [<s= pan style=3D"color:#0082D5"><a href=3D"applewebdata://5D25CA10-0BA9-4233-9D= DF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid= ent/newIncident.aspx"><span style=3D"color:#0082D5">HERE</span></a></span>]= <span style=3D"color:blue"> </span>takes less than a minute</span></b><o:p></o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif""> </span></b><o:p></o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:"= ;Arial","sans-serif"">CloudForms User Guide available</span>= </b><span style=3D"font-size:10.0pt;font-family:"Arial","san= s-serif""> [<b><span style=3D"color:#0082D5"><a href=3D"https://d= l.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.p= df"><span style=3D"color:#0082D5">HERE</span></a></span></b>]</span><o:p></= o:p></p> </td> </tr> </tbody> </table> <p class=3D"MsoNormal"><span style=3D"color:black;mso-fareast-language:EN-G= B"> </span><span style=3D"color:black"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"color:black"> <o:p></o:p></span>= </p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black;mso-fare= ast-language:EN-GB"><o:p> </o:p></span></p> <div class=3D"MsoNormal" align=3D"center" style=3D"text-align:center"><span= style=3D"font-size:10.5pt;color:black;mso-fareast-language:EN-GB"> <hr size=3D"2" width=3D"100%" align=3D"center"> </span></div> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black;mso-fare= ast-language:EN-GB"><o:p> </o:p></span></p> </div> </div> </div> <br> <hr> <font face=3D"Arial" color=3D"Black" size=3D"2"><br> </font> </body> </html> --_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_--
participants (2)
-
Bill Dossett
-
Soeren Malchow