[Users] Successfully virt-v2v from CentOS 6.3 VM to Ovirt 3.2 nightly

Hello, on my oVirt Host configured with F18 and all-in-one and ovirt-nightly as of ovirt-engine-3.2.0-1.20130107.git1a60fea.fc18.noarch I was able to import a CentOS 5.8 VM coming from a CentOS 6.3 host. The oVirt node server is the same where I'm unable to run a newly created WIndows 7 32bit vm... See http://lists.ovirt.org/pipermail/users/2013-January/011390.html In this thread I would like to report about successful import phases and some doubts about: 1) no password requested during virt-v2v 2) no connectivity in guest imported. On CentOS 6.3 host # virt-v2v -o rhev -osd 10.4.4.59:/EXPORT --network ovirtmgmt c56cr c56cr_001: 100% [===================================================================================]D 0h02m17s virt-v2v: c56cr configured with virtio drivers. ---> I would expect to be asked for the password of a privileged user in oVirt infra, instead the export process started without any prompt. Is this correct? In my opinion in this case it could be a security concern.... during virt-v2v command, on oVirt node I see this inside NFS Export domain: $ sudo ls -l /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/v2v.pmbPOGM_/30df5806-6911-41b3-8fef-1fd8d755659f total 10485764 -rw-r--r--. 1 vdsm kvm 10737418240 Jan 9 16:05 0d0e8e12-8b35-4034-89fc-8cbd4a7d7d81 At the end of the process: $ sudo ls -l /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/images/ total 4 drwxr-xr-x. 2 vdsm kvm 4096 Jan 9 16:05 30df5806-6911-41b3-8fef-1fd8d755659f $ sudo ls -lR /EXPORT/ /EXPORT/: total 4 drwxr-xr-x. 5 vdsm kvm 4096 Jan 9 16:06 b878ad09-602f-47da-87f5-2829d67d3321 /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321: total 12 drwxr-xr-x. 2 vdsm kvm 4096 Jan 9 16:01 dom_md drwxr-xr-x. 3 vdsm kvm 4096 Jan 9 16:06 images drwxr-xr-x. 4 vdsm kvm 4096 Jan 9 16:02 master /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/dom_md: total 8 -rw-rw----. 1 vdsm kvm 0 Jan 9 16:01 ids -rw-rw----. 1 vdsm kvm 0 Jan 9 16:01 inbox -rw-rw----. 1 vdsm kvm 512 Jan 9 16:01 leases -rw-r--r--. 1 vdsm kvm 350 Jan 9 16:01 metadata -rw-rw----. 1 vdsm kvm 0 Jan 9 16:01 outbox /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/images: total 4 drwxr-xr-x. 2 vdsm kvm 4096 Jan 9 16:05 30df5806-6911-41b3-8fef-1fd8d755659f /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/images/30df5806-6911-41b3-8fef-1fd8d755659f: total 10485768 -rw-r--r--. 1 vdsm kvm 10737418240 Jan 9 16:06 0d0e8e12-8b35-4034-89fc-8cbd4a7d7d81 -rw-r--r--. 1 vdsm kvm 330 Jan 9 16:05 0d0e8e12-8b35-4034-89fc-8cbd4a7d7d81.meta /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/master: total 8 drwxr-xr-x. 2 vdsm kvm 4096 Jan 9 16:02 tasks drwxr-xr-x. 3 vdsm kvm 4096 Jan 9 16:06 vms /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/master/tasks: total 0 /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/master/vms: total 4 drwxr-xr-x. 2 vdsm kvm 4096 Jan 9 16:06 2398149c-32b9-4bae-b572-134d973a759c /EXPORT/b878ad09-602f-47da-87f5-2829d67d3321/master/vms/2398149c-32b9-4bae-b572-134d973a759c: total 8 -rw-r--r--. 1 vdsm kvm 4649 Jan 9 16:06 2398149c-32b9-4bae-b572-134d973a759c.ovf Then I began the vm import in webadmin: Import process has begun for VM(s): c56cr. You can check import status in the 'Events' tab of the specific destination storage domain, or in the main 'Events' tab ---> regarding the import status, the "specific destination storage domain" would be my DATA domain, correct? Because I see nothing in it and nothing in export domain. Instead I correctly see in main events tab of the cluster these two messages 2013-Jan-09, 16:16 Starting to import Vm c56cr to Data Center Poli, Cluster Poli1 2013-Jan-09, 16:18 Vm c56cr was imported successfully to Data Center Poli, Cluster Poli1 SO probably the first option should go away....? During the import, on the oVirt host [g.cecchi@f18aio ~]$ vmstat 3 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 1684556 121824 28660956 0 0 8 69 21 66 0 0 99 0 1 1 0 1515192 121824 28830112 0 0 0 58749 4468 6068 0 3 85 11 0 1 0 1330708 121828 29014320 0 0 0 59415 4135 5149 0 4 85 11 $ sudo iotop -d 3 -P -o -k Total DISK READ: 0.33 K/s | Total DISK WRITE: 56564.47 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 22501 idle vdsm 55451.24 K/s 56459.45 K/s 0.00 % 91.03 % dd if=/rhev/data-center/~count=10240 oflag=direct 831 be/4 root 0.00 K/s 0.00 K/s 0.00 % 3.56 % [flush-253:1] 576 be/3 root 0.00 K/s 19.69 K/s 0.00 % 0.72 % [jbd2/dm-1-8] 23309 be/3 vdsm 0.33 K/s 0.00 K/s 0.00 % 0.00 % python /usr/share/vdsm/st~moteFileHandler.pyc 49 47 17057 be/4 apache 0.00 K/s 2.63 K/s 0.00 % 0.00 % httpd -DFOREGROUND 15524 be/4 root 0.00 K/s 1.31 K/s 0.00 % 0.00 % libvirtd --listen $ ps -wfp 22501 UID PID PPID C STIME TTY TIME CMD vdsm 22501 16120 8 16:16 ? 00:00:14 /usr/bin/dd if=/rhev/data-center/89d40d09-5109-4070-b9b0-86f1addce8af/b878ad09-602f- I was then able to power on and connect via vnc to the console. But I noticed it has no connectivity with its gateway Host is on vlan 65 (em3 + em3.65 cofigured) host has 3: em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovirtmgmt state UP qlen 1000 link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff inet6 fe80::21c:c4ff:feab:3add/64 scope link valid_lft forever preferred_lft forever ... 6: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff inet6 fe80::21c:c4ff:feab:3add/64 scope link valid_lft forever preferred_lft forever 7: em3.65@em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff inet 10.4.4.59/24 brd 10.4.4.255 scope global em3.65 inet6 fe80::21c:c4ff:feab:3add/64 scope link valid_lft forever preferred_lft forever ... 13: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UNKNOWN qlen 500 link/ether fe:54:00:d3:8f:a3 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc54:ff:fed3:8fa3/64 scope link valid_lft forever preferred_lft forever [g.cecchi@f18aio ~]$ ip route list default via 10.4.4.250 dev em3.65 10.4.4.0/24 dev em3.65 proto kernel scope link src 10.4.4.59 ovirtmgmt is tagged in datacenter Poli1 guest is originally configured (and it maintained this) on bridged vlan65 on CentOS 63 host. Its parameters eth0 with ip 10.4.4.53 and gw 10.4.4.250 from webadmin pov it seems ok. see also this screenshot https://docs.google.com/open?id=0BwoPbcrMv8mvbENvR242VFJ2M1k any help will be appreciated. do I have to enable some kind of routing not enabled by default..? Thanks, Gianluca
participants (1)
-
Gianluca Cecchi