Hi, Sandvik you can run: cat /etc/yum.repo.d/ 2014-11-21 14:21 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt;: > Hi, > > > The repo that I have use if > http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from > this documentation http://www.ovirt.org/Quick_Start_Guide, because the > repo that this documentation > http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ > seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm > sudo yum localinstall -y > http://ovirt.org/releases/ovirt-release.noarch.rpm > ------------------------------ > > This article originally appeared on community.redhat.com. Follow the > community on Twitter at @redhatopen <https://twitter.com/redhatopen>;, > and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ > <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391... > . > sudo yum localinstall -y > http://ovirt.org/releases/ovirt-release.noarch.rpm > ------------------------------ > > This article originally appeared on community.redhat.com. Follow the > community on Twitter at @redhatopen <https://twitter.com/redhatopen>;, > and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ > <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391... > . > sudo yum localinstall -y > http://ovirt.org/releases/ovirt-release.noarch.rpm > ------------------------------ > > This article originally appeared on community.redhat.com. Follow the > community on Twitter at @redhatopen <https://twitter.com/redhatopen>;, > and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ > <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391... > . > > On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou <coffee.zyr(a)gmail.com&gt; > wrote: > >> Hi, Sandvik >> I have read the engine.log, it shows: >> Cannot find a valid baseurl for repo: base >> >> can you show me your repo? >> >> 2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt;: >> >>> Hi, >>> >>> I'm sorry I forgot, here's the attachement. >>> >>> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin < >>> agustinsandvik(a)gmail.com&gt; wrote: >>> >>>> Hi, >>>> >>>> I'm sorry I forgot, here's the attachement. >>>> >>>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com&gt; >>>> wrote: >>>> >>>>> Hi, Sandvik >>>>> maybe you forgot to attach your log~ that's >>>>> ovirt-hosted-engine-setup, so you can also attach your setup log:-) >>>>> >>>>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt; >>>>> : >>>>> >>>>>> Hi users, >>>>>> >>>>>> Chou, here's my I already tried your suggestion right now, but it >>>>>> still failed, here's my engine.log and vdsm.log. and one more thing, since >>>>>> the time that I started the installation of ovirt-hosted-engine setup, I >>>>>> starting to have this kind of error message on my /var/log/message. >>>>>> >>>>>> >>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>>>> multipath: error getting device >>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>>>> target to table >>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>>>> multipath: error getting device >>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>>>> target to table >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>>>> can't remove >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>>>> can't remove >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>>>> can't remove >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>>>> can't remove >>>>>> >>>>>> >>>>>> Thanks in advance >>>>>> Sandvik >>>>>> >>>>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com&gt; >>>>>> wrote: >>>>>> >>>>>>> Hi, Sandvik >>>>>>> it's just a suggestion:-) >>>>>>> >>>>>>> i think you can have a try, as i don't know my solution worked >>>>>>> or not. maybe there are some other people who have encountered this problem >>>>>>> before and they can give you some advice:-) >>>>>>> >>>>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin < >>>>>>> agustinsandvik(a)gmail.com&gt;: >>>>>>> >>>>>>>> HI Chou, >>>>>>>> >>>>>>>> >>>>>>>> Thanks, I will try your solution now, and should I resend this >>>>>>>> email to users(a)ovirt.org? >>>>>>>> >>>>>>>> >>>>>>>> Thanks >>>>>>>> Sandvik >>>>>>>> >>>>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com >>>>>>>> > wrote: >>>>>>>> >>>>>>>>> Hi, Sandvik >>>>>>>>> and please don't send the email to me only but to user mail >>>>>>>>> list, so everybody can help you :-) >>>>>>>>> >>>>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com&gt;: >>>>>>>>> >>>>>>>>>> Hi, Sandvik >>>>>>>>>> i can see the ERROR message: Command returned failure code 1 >>>>>>>>>> during SSH session .... you can try these: >>>>>>>>>> >>>>>>>>>> 1. stop firewall on the hosted_engine_1 >>>>>>>>>> 2. running command: vdsm-tool configure >>>>>>>>>> >>>>>>>>>> if it's still failure, please attach your engine.log and >>>>>>>>>> vdsm.log >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin < >>>>>>>>>> agustinsandvik(a)gmail.com&gt;: >>>>>>>>>> >>>>>>>>>>> Hi Chou, >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I have successfully install the hosted engine, but at the end >>>>>>>>>>> of the installation I have this kind of error message >>>>>>>>>>> >>>>>>>>>>> To continue make a selection from the options below: >>>>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>>>> (2) Power off and restart the VM >>>>>>>>>>> (3) Abort setup >>>>>>>>>>> >>>>>>>>>>> (1, 2, 3)[1]: >>>>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>>>>>>>> Enter the name of the cluster to which you want to >>>>>>>>>>> add the host (Default) [Default]: >>>>>>>>>>> [ INFO ] Waiting for the host to become operational in the >>>>>>>>>>> engine. This may take several minutes... >>>>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please >>>>>>>>>>> check engine and bootstrap installation logs. >>>>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>>>>>>>> Please shutdown the VM allowing the system to launch >>>>>>>>>>> it as a monitored service. >>>>>>>>>>> The system will wait until the VM is down. >>>>>>>>>>> [ INFO ] Enabling and starting HA services >>>>>>>>>>> Hosted Engine successfully set up >>>>>>>>>>> [ INFO ] Stage: Clean up >>>>>>>>>>> [ INFO ] Generating answer file >>>>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' >>>>>>>>>>> has been updated >>>>>>>>>>> [ INFO ] Stage: Pre-termination >>>>>>>>>>> [ INFO ] Stage: Termination >>>>>>>>>>> >>>>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>>>>>>>> while executing action: >>>>>>>>>>> >>>>>>>>>>> hosted_engine_1: >>>>>>>>>>> >>>>>>>>>>> - Cannot activate Host. Host has no unique id. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen >>>>>>>>>>> it still failed status. >>>>>>>>>>> >>>>>>>>>>> I hope you can help me. >>>>>>>>>>> >>>>>>>>>>> Please see attach for screenshot. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thanks in advance. >>>>>>>>>>> sandvik >>>>>>>>>>> >>>>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>>>>>>>> agustinsandvik(a)gmail.com&gt; wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi guys, >>>>>>>>>>>> >>>>>>>>>>>> First of all I want to thank you for replying my email. >>>>>>>>>>>> @Chou, yes I can access the engine webadmin. >>>>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check >>>>>>>>>>>> my /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>>>>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>>>>>>>> Is this because of I've put different FQDN during the installation process? >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou < >>>>>>>>>>>> coffee.zyr(a)gmail.com&gt; wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi, Chao >>>>>>>>>>>>> You may make a mistake, that's not my setup :-) >>>>>>>>>>>>> But i don't think it's a problem of password. If the >>>>>>>>>>>>> passwords were not the same, it will throw an ERROR of: >>>>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: >>>>>>>>>>>>> HTTP Status 401 >>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add >>>>>>>>>>>>> the host to cluster None >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> so, i guess, maybe Sandvik's setup is still not >>>>>>>>>>>>> accessable ? >>>>>>>>>>>>> >>>>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao < >>>>>>>>>>>>> xiec.fnst(a)cn.fujitsu.com&gt;: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi, Chou >>>>>>>>>>>>>> >>>>>>>>>>>>>> It seems your rhevm is not setup successfully. I >>>>>>>>>>>>>> suggest you can think about the two possible root cause below: >>>>>>>>>>>>>> >>>>>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is >>>>>>>>>>>>>> configured correctly? >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>>>>>>>> rhevm-setup is same ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> If those are not your problem cause, Please provide more log >>>>>>>>>>>>>> about it. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto: >>>>>>>>>>>>>> users-bounces(a)ovirt.org] *代表 *Coffee Chou >>>>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>>>>>>>> *收件人:* Sandvik Agustin >>>>>>>>>>>>>> *抄送:* users(a)ovirt.org >>>>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>>>>>>>> agustinsandvik(a)gmail.com&gt;: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi!, >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this >>>>>>>>>>>>>> documentation >>>>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have already completed the installation of ovirt engine >>>>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy >>>>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>>>>>>>> >>>>>>>>>>>>>> Engine health status page is not yet reachable. >>>>>>>>>>>>>> >>>>>>>>>>>>>> To continue make a selection from the options >>>>>>>>>>>>>> below: >>>>>>>>>>>>>> >>>>>>>>>>>>>> (1) Continue setup - engine installation is >>>>>>>>>>>>>> complete >>>>>>>>>>>>>> >>>>>>>>>>>>>> (2) Power off and restart the VM >>>>>>>>>>>>>> >>>>>>>>>>>>>> (3) Abort setup >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> what should I do? how to fix this? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>>>> >>>>>>>>>>>>>> sandvik >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >