vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt
Hi all, I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm keeps removing 'BOOTPROTO=dhcp' from /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. I set the file as follows: DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes BOOTPROTO=dhcp MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no call 'sudo systemctl restart network' and ip address is successfully assigned. Then reboot the machine and ip address is not fetched and ifcfg-ovirtmgmt looks like this # Generated by VDSM version 4.17.0-1240.git487a19e.fc22 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no HOTPLUG=no Is there any way how to prevent vdsm from removing BOOTPROTO statement or make ovirtmgmt to work with dhcp? Environment: Host: runs in virt-manager vm, Fedora 22 vdsm: 4.17.0-1240.git487a19e.fc22 from http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/ Thanks. Jakub
Ahoj Kubo, would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right after restarting the network service? I think your configuration needs be persisted in VDSM's network persistence so it is restored (with the same configuration) on startup. Anyway, VDSM should be used to configure networks (directly using vdsClient or indirectly through oVirt engine or via other means -- RPC). Your network may be configured by running (assuming your NIC is eth0): vdsClient -s 0 setupNetworks 'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}' If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a bug with myself as the assignee :-) Thanks, Ondra On 11.8.2015 13:04, Jakub Niedermertl wrote:
Hi all,
I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm keeps removing 'BOOTPROTO=dhcp' from /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt.
I set the file as follows:
DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes BOOTPROTO=dhcp MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no
call 'sudo systemctl restart network' and ip address is successfully assigned. Then reboot the machine and ip address is not fetched and ifcfg-ovirtmgmt looks like this
# Generated by VDSM version 4.17.0-1240.git487a19e.fc22 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no HOTPLUG=no
Is there any way how to prevent vdsm from removing BOOTPROTO statement or make ovirtmgmt to work with dhcp?
Environment: Host: runs in virt-manager vm, Fedora 22 vdsm: 4.17.0-1240.git487a19e.fc22 from http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/
Thanks.
Jakub _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Ahoj, I've created a bug https://bugzilla.redhat.com/show_bug.cgi?id=1252534 and assign it to you. Thanks for help Jakub ----- Original Message -----
From: "Ondřej Svoboda" <ondrej@svobodasoft.cz> To: users@ovirt.org Sent: Tuesday, August 11, 2015 2:06:36 PM Subject: Re: [ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt
Ahoj Kubo,
would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right after restarting the network service? I think your configuration needs be persisted in VDSM's network persistence so it is restored (with the same configuration) on startup.
Anyway, VDSM should be used to configure networks (directly using vdsClient or indirectly through oVirt engine or via other means -- RPC). Your network may be configured by running (assuming your NIC is eth0):
vdsClient -s 0 setupNetworks 'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}'
If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a bug with myself as the assignee :-)
Thanks, Ondra
On 11.8.2015 13:04, Jakub Niedermertl wrote:
Hi all,
I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm keeps removing 'BOOTPROTO=dhcp' from /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt.
I set the file as follows:
DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes BOOTPROTO=dhcp MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no
call 'sudo systemctl restart network' and ip address is successfully assigned. Then reboot the machine and ip address is not fetched and ifcfg-ovirtmgmt looks like this
# Generated by VDSM version 4.17.0-1240.git487a19e.fc22 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no HOTPLUG=no
Is there any way how to prevent vdsm from removing BOOTPROTO statement or make ovirtmgmt to work with dhcp?
Environment: Host: runs in virt-manager vm, Fedora 22 vdsm: 4.17.0-1240.git487a19e.fc22 from http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/
Thanks.
Jakub _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hi Jakub, I think I had a similar problem. Vdsm would change the parameters of my network interface even when I used the ovirt management console to change it. There are files that vdsm use to configure the ifcfg-* files in /var/lib/vdsm/persistence/netconf/ovirtmgmt on the virtual server hosts. Maybe you can try fooling around with those. Good luck, Tyler On Tue, Aug 11, 2015 at 9:08 AM, Jakub Niedermertl <jniederm@redhat.com> wrote:
Ahoj,
I've created a bug https://bugzilla.redhat.com/show_bug.cgi?id=1252534 and assign it to you.
Thanks for help Jakub
----- Original Message -----
From: "Ondřej Svoboda" <ondrej@svobodasoft.cz> To: users@ovirt.org Sent: Tuesday, August 11, 2015 2:06:36 PM Subject: Re: [ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt
Ahoj Kubo,
would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right after restarting the network service? I think your configuration needs be persisted in VDSM's network persistence so it is restored (with the same configuration) on startup.
Anyway, VDSM should be used to configure networks (directly using vdsClient or indirectly through oVirt engine or via other means -- RPC). Your network may be configured by running (assuming your NIC is eth0):
vdsClient -s 0 setupNetworks
'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}'
If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a bug with myself as the assignee :-)
Thanks, Ondra
On 11.8.2015 13:04, Jakub Niedermertl wrote:
Hi all,
I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm
keeps
removing 'BOOTPROTO=dhcp' from /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt.
I set the file as follows:
DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes BOOTPROTO=dhcp MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no
call 'sudo systemctl restart network' and ip address is successfully assigned. Then reboot the machine and ip address is not fetched and ifcfg-ovirtmgmt looks like this
# Generated by VDSM version 4.17.0-1240.git487a19e.fc22 DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no HOTPLUG=no
Is there any way how to prevent vdsm from removing BOOTPROTO statement or make ovirtmgmt to work with dhcp?
Environment: Host: runs in virt-manager vm, Fedora 22 vdsm: 4.17.0-1240.git487a19e.fc22 from http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/
Thanks.
Jakub _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (3)
-
Jakub Niedermertl -
Ondřej Svoboda -
Tyler Couto