4:57 p.m.
Hi all.
Is it possible to configure oVirt for work with two NICs in bond/LACP
across two switches, according to the image below?
[image: LACP_Across_Two_Switchs.png]
Thank you all.
You guys do a wonderful job.
--
Att,
Jorge Visentini
+55 55 98432-9868
5:23 p.m.
Yes.
I have it running this way. You must configure as 802.3ad normally on oVirt but keep in
mind that you must use bond and not teaming.
On the switches just configure MLAG, VLT, vPC ou whatever multichassis aggregation
suportes by your switch vendor.
For the ovirtmgmt there’s some caveats to add it on top of bonds. I’m not sure if as today
is solved, but you need to preconfigure vdsm if you want the bonded interfaces to host
ovirtmgmt.
Sent from my iPhone
On 27 Jul 2021, at 12:01, Jorge Visentini <jorgevisentini(a)gmail.com> wrote:
Hi all.
Is it possible to configure oVirt for work with two NICs in bond/LACP across two switches,
according to the image below?
<LACP_Across_Two_Switchs.png>
Thank you all.
You guys do a wonderful job.
--
Att,
Jorge Visentini
+55 55 98432-9868
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ARRD5B7M6RH...
5:25 p.m.
Yes, why not?
k
Sent from my iPhone
On 27 Jul 2021, at 18:01, Jorge Visentini
<jorgevisentini(a)gmail.com> wrote:
Hi all.
Is it possible to configure oVirt for work with two NICs in bond/LACP across two
switches, according to the image below?
<LACP_Across_Two_Switchs.png>
Thank you all.
You guys do a wonderful job.
--
Att,
Jorge Visentini
+55 55 98432-9868
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ARRD5B7M6RH...
5:29 p.m.
Ok.
Thanks man!!
I'm working to improve the infrastructure.
Em ter., 27 de jul. de 2021 às 12:23, Vinícius Ferrão <
ferrao(a)versatushpc.com.br> escreveu:
Yes.
I have it running this way. You must configure as 802.3ad normally on
oVirt but keep in mind that you must use bond and not teaming.
On the switches just configure MLAG, VLT, vPC ou whatever multichassis
aggregation suportes by your switch vendor.
For the ovirtmgmt there’s some caveats to add it on top of bonds. I’m not
sure if as today is solved, but you need to preconfigure vdsm if you want
the bonded interfaces to host ovirtmgmt.
Sent from my iPhone
On 27 Jul 2021, at 12:01, Jorge Visentini <jorgevisentini(a)gmail.com>
wrote:
Hi all.
Is it possible to configure oVirt for work with two NICs in bond/LACP
across two switches, according to the image below?
<LACP_Across_Two_Switchs.png>
Thank you all.
You guys do a wonderful job.
--
Att,
Jorge Visentini
+55 55 98432-9868
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ARRD5B7M6RH...
--
Att,
Jorge Visentini
+55 55 98432-9868
1:56 p.m.
For the ovirtmgmt there’s some caveats to add it on top of bonds. I’m
not sure if as today
is solved, but you need to preconfigure vdsm if you want the bonded interfaces to host
ovirtmgmt.
Can you please elaborate on the "preconfigure vdsm if you want the bonded interfaces
to host ovirtmgmt" bit. What config should be changed in vdsm for it to work?
Regards,
Ravi
4:24 p.m.
I believe they updated the vdsm configuration part.
You just need to configure the bond on the host via the cockpit.
For some reason, I needed to configure an IP on the bond, otherwise the bond kept
deactivating and I lost connection with the host.
Then, you create the vlan interface on top of the bond interface with the IP of your
management network.
When you add the host to the engine, the ovirtmgmt interface will be on top of the vlan
interface of your management network.
Below is the configuration flow:
IP 10.0.0.1/24 - Your host MGMT Network (ovirtmgmt)
IF Slave1 (Switch1) + IF Slave2 (Switch2) ---> (IF bond0 - IP 172.16.0.1/32) --->
(IF bond0.100 - IP 10.0.0.1/24 (VLAN 100)) ---> (IF ovirtmgmt)
695
days inactive
997
days old
5 comments
5 participants
participants (5)
-
Jorge Visentini -
jorgevisentini＠gmail.com
-
Konstantin Shalygin -
ravi k -
Vinícius Ferrão