Change Vlan ID's which are connected to the Host/VM's
Hi Guys, Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ? As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges. I hope someone has an idea. Thanks! Matt
Hello Matt Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well. Good luck) On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Check this feature page as well) http://www.ovirt.org/develop/release-management/features/network/multihostne... On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
HI Micheal, Thanks! it looks like it's what I need, checking out! Thank you very much! Matt 2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/multihostne...
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Hi Micheal, I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ? I'm on Ovirt 4.0.6 Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again. Thanks, Matt 2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/multihostne...
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Hi Matt Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s. Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue. Thanks! On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/ multihostnetworkconfiguration/
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this
will
send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Hi, OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ? Cheers, Matt 2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/multihostne...
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Guys,
Is there a way to change Vlan ID's which are connected to the Hosts when the VM's on it are down ?
As i need to change a lot of them it would be create if the engine can perform some process which allows me to hammer my hosts with the new vlan ID's for their bridges.
I hope someone has an idea.
Thanks!
Matt _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done. Can't this be changed ? Thanks, Matt 2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/multihostne...
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com> wrote:
Hello Matt
Yes, there is a way, it can be done as part of our MultiHost Network feature(since 3.4). If you have the same logical network attached to multiple hosts in your DC, you can update their vlan IDs via the 'Networks' main tab and this will send a setup networks command through all of your hosts in the DC and update the logical network with the new vlan ID. - Note that this can be done when the VMs are running on the host/s as well.
Good luck)
On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> wrote: > > Hi Guys, > > Is there a way to change Vlan ID's which are connected to the Hosts > when the VM's on it are down ? > > As i need to change a lot of them it would be create if the engine > can > perform some process which allows me to hammer my hosts with the new > vlan ID's for their bridges. > > I hope someone has an idea. > > Thanks! > > Matt > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Hi again This can't be changed. When the network attached to host, it is used by vdsm and has a vdsm-'network-name' which in use. When it used by a VM, virsh using this name, so you can't change it, unless removing and detaching the network from VM and host. Best regards, On Fri, Feb 17, 2017 at 12:17 PM, Matt . <yamakasi.014@gmail.com> wrote:
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done.
Can't this be changed ?
Thanks,
Matt
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>:
Check this feature page as well)
http://www.ovirt.org/develop/release-management/features/network/
multihostnetworkconfiguration/
On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman <mburman@redhat.com
wrote: > > Hello Matt > > Yes, there is a way, it can be done as part of our MultiHost Network > feature(since 3.4). > If you have the same logical network attached to multiple hosts in > your > DC, you can update their vlan IDs via the 'Networks' main tab and
2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>: this
> will > send a setup networks command through all of your hosts in the DC and > update > the logical network with the new vlan ID. > - Note that this can be done when the VMs are running on the host/s as > well. > > Good luck) > > On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> > wrote: >> >> Hi Guys, >> >> Is there a way to change Vlan ID's which are connected to the Hosts >> when the VM's on it are down ? >> >> As i need to change a lot of them it would be create if the engine >> can >> perform some process which allows me to hammer my hosts with the new >> vlan ID's for their bridges. >> >> I hope someone has an idea. >> >> Thanks! >> >> Matt >> _______________________________________________ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Hi Micheal, OK, thanks for this, but what if I change them in the Database and resync ? As ovirtmgmt is seperate it should be able to control the hosts. I'm curious about that as I think that should work. Thanks, Matt 2017-02-19 10:30 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi again
This can't be changed. When the network attached to host, it is used by vdsm and has a vdsm-'network-name' which in use. When it used by a VM, virsh using this name, so you can't change it, unless removing and detaching the network from VM and host.
Best regards,
On Fri, Feb 17, 2017 at 12:17 PM, Matt . <yamakasi.014@gmail.com> wrote:
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done.
Can't this be changed ?
Thanks,
Matt
2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
HI Micheal,
Thanks! it looks like it's what I need, checking out!
Thank you very much!
Matt
2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>: > Check this feature page as well) > > > > http://www.ovirt.org/develop/release-management/features/network/multihostne... > > > > On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman > <mburman@redhat.com> > wrote: >> >> Hello Matt >> >> Yes, there is a way, it can be done as part of our MultiHost >> Network >> feature(since 3.4). >> If you have the same logical network attached to multiple hosts in >> your >> DC, you can update their vlan IDs via the 'Networks' main tab and >> this >> will >> send a setup networks command through all of your hosts in the DC >> and >> update >> the logical network with the new vlan ID. >> - Note that this can be done when the VMs are running on the >> host/s as >> well. >> >> Good luck) >> >> On Tue, Feb 14, 2017 at 11:51 PM, Matt . <yamakasi.014@gmail.com> >> wrote: >>> >>> Hi Guys, >>> >>> Is there a way to change Vlan ID's which are connected to the >>> Hosts >>> when the VM's on it are down ? >>> >>> As i need to change a lot of them it would be create if the >>> engine >>> can >>> perform some process which allows me to hammer my hosts with the >>> new >>> vlan ID's for their bridges. >>> >>> I hope someone has an idea. >>> >>> Thanks! >>> >>> Matt >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> -- >> Michael Burman >> RedHat Israel, RHV-M Network QE >> >> Mobile: 054-5355725 >> IRC: mburman > > > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Hi Matt, It won't work. The name is the key for the sync operation. So it cannot be out of sync. If you change the name via the db (which is highly not recommended!), the network will be considered as a new one. You will end up (after refreshing the capabilities) with unmanaged network in the hosts (the network with the old name) and new network in the dc/cluster that is not attached to any host. Alona. On Sun, Feb 19, 2017 at 12:28 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
OK, thanks for this, but what if I change them in the Database and resync ? As ovirtmgmt is seperate it should be able to control the hosts.
I'm curious about that as I think that should work.
Thanks,
Matt
Hi again
This can't be changed. When the network attached to host, it is used by vdsm and has a vdsm-'network-name' which in use. When it used by a VM, virsh using this name, so you can't change it, unless removing and detaching the network from VM and host.
Best regards,
On Fri, Feb 17, 2017 at 12:17 PM, Matt . <yamakasi.014@gmail.com> wrote:
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done.
Can't this be changed ?
Thanks,
Matt
2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case,
it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
I trying pro process the change the issue is that I still get the message (with some variable bug in it) that some hosts have the logical network in usage. Is this Only on the name of the network ?
I'm on Ovirt 4.0.6
Error while executing action: Cannot edit Network. This logical network is used by hosts: (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} - Please detach hosts using this logical network and try again.
Thanks,
Matt
2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>: > HI Micheal, > > Thanks! it looks like it's what I need, checking out! > > Thank you very much! > > Matt > > 2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>: >> Check this feature page as well) >> >> >> >> http://www.ovirt.org/develop/release-management/features/
network/multihostnetworkconfiguration/
>> >> >> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman >> <mburman@redhat.com> >> wrote: >>> >>> Hello Matt >>> >>> Yes, there is a way, it can be done as part of our MultiHost >>> Network >>> feature(since 3.4). >>> If you have the same logical network attached to multiple hosts in >>> your >>> DC, you can update their vlan IDs via the 'Networks' main tab and >>> this >>> will >>> send a setup networks command through all of your hosts in the DC >>> and >>> update >>> the logical network with the new vlan ID. >>> - Note that this can be done when the VMs are running on the >>> host/s as >>> well. >>> >>> Good luck) >>> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt . < yamakasi.014@gmail.com> >>> wrote: >>>> >>>> Hi Guys, >>>> >>>> Is there a way to change Vlan ID's which are connected to the >>>> Hosts >>>> when the VM's on it are down ? >>>> >>>> As i need to change a lot of them it would be create if the >>>> engine >>>> can >>>> perform some process which allows me to hammer my hosts with
2017-02-19 10:30 GMT+01:00 Michael Burman <mburman@redhat.com>: then the
>>>> new >>>> vlan ID's for their bridges. >>>> >>>> I hope someone has an idea. >>>> >>>> Thanks! >>>> >>>> Matt >>>> _______________________________________________ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> >>> -- >>> Michael Burman >>> RedHat Israel, RHV-M Network QE >>> >>> Mobile: 054-5355725 >>> IRC: mburman >> >> >> >> >> -- >> Michael Burman >> RedHat Israel, RHV-M Network QE >> >> Mobile: 054-5355725 >> IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hi, Yes I saw it's not ideal to do this using the DB. It would be nice if it's possible to change it if the using VM's are down. Cheers, Matt 2017-02-19 14:10 GMT+01:00 Alona Kaplan <alkaplan@redhat.com>:
Hi Matt,
It won't work. The name is the key for the sync operation. So it cannot be out of sync.
If you change the name via the db (which is highly not recommended!), the network will be considered as a new one. You will end up (after refreshing the capabilities) with unmanaged network in the hosts (the network with the old name) and new network in the dc/cluster that is not attached to any host.
Alona.
On Sun, Feb 19, 2017 at 12:28 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
OK, thanks for this, but what if I change them in the Database and resync ? As ovirtmgmt is seperate it should be able to control the hosts.
I'm curious about that as I think that should work.
Thanks,
Matt
2017-02-19 10:30 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi again
This can't be changed. When the network attached to host, it is used by vdsm and has a vdsm-'network-name' which in use. When it used by a VM, virsh using this name, so you can't change it, unless removing and detaching the network from VM and host.
Best regards,
On Fri, Feb 17, 2017 at 12:17 PM, Matt . <yamakasi.014@gmail.com> wrote:
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done.
Can't this be changed ?
Thanks,
Matt
2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi Matt
Are you trying to change the network's name? if this is the case, then it doesn't allowed while network is attached to host/s.
Yes, it is a bug in the error message when trying to rename network while it is attached to multiple hosts. I will report a bug for this issue.
Thanks!
On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> wrote: > > Hi Micheal, > > I trying pro process the change the issue is that I still get the > message (with some variable bug in it) that some hosts have the > logical network in usage. Is this Only on the name of the network ? > > I'm on Ovirt 4.0.6 > > Error while executing action: Cannot edit Network. This logical > network is used by hosts: > (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): > ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} > - Please detach hosts using this logical network and try again. > > Thanks, > > Matt > > 2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>: > > HI Micheal, > > > > Thanks! it looks like it's what I need, checking out! > > > > Thank you very much! > > > > Matt > > > > 2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>: > >> Check this feature page as well) > >> > >> > >> > >> > >> http://www.ovirt.org/develop/release-management/features/network/multihostne... > >> > >> > >> > >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman > >> <mburman@redhat.com> > >> wrote: > >>> > >>> Hello Matt > >>> > >>> Yes, there is a way, it can be done as part of our MultiHost > >>> Network > >>> feature(since 3.4). > >>> If you have the same logical network attached to multiple hosts > >>> in > >>> your > >>> DC, you can update their vlan IDs via the 'Networks' main tab > >>> and > >>> this > >>> will > >>> send a setup networks command through all of your hosts in the > >>> DC > >>> and > >>> update > >>> the logical network with the new vlan ID. > >>> - Note that this can be done when the VMs are running on the > >>> host/s as > >>> well. > >>> > >>> Good luck) > >>> > >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt . > >>> <yamakasi.014@gmail.com> > >>> wrote: > >>>> > >>>> Hi Guys, > >>>> > >>>> Is there a way to change Vlan ID's which are connected to the > >>>> Hosts > >>>> when the VM's on it are down ? > >>>> > >>>> As i need to change a lot of them it would be create if the > >>>> engine > >>>> can > >>>> perform some process which allows me to hammer my hosts with > >>>> the > >>>> new > >>>> vlan ID's for their bridges. > >>>> > >>>> I hope someone has an idea. > >>>> > >>>> Thanks! > >>>> > >>>> Matt > >>>> _______________________________________________ > >>>> Users mailing list > >>>> Users@ovirt.org > >>>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >>> > >>> > >>> > >>> -- > >>> Michael Burman > >>> RedHat Israel, RHV-M Network QE > >>> > >>> Mobile: 054-5355725 > >>> IRC: mburman > >> > >> > >> > >> > >> -- > >> Michael Burman > >> RedHat Israel, RHV-M Network QE > >> > >> Mobile: 054-5355725 > >> IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hi Alona, I must say, I removed the network from the host but the VM's still have it on their nics and that is the issue and stop me from changing the networkname. In my opinion nothing affects changing the name when it's only on the VM and the VM is down. I hope we can work something out on that part, the hosts is not the issue, I can manage that with removing the networklabel from the network so it get's removed from the host. Cheers, Matt 2017-02-19 15:28 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
Yes I saw it's not ideal to do this using the DB.
It would be nice if it's possible to change it if the using VM's are down.
Cheers,
Matt
2017-02-19 14:10 GMT+01:00 Alona Kaplan <alkaplan@redhat.com>:
Hi Matt,
It won't work. The name is the key for the sync operation. So it cannot be out of sync.
If you change the name via the db (which is highly not recommended!), the network will be considered as a new one. You will end up (after refreshing the capabilities) with unmanaged network in the hosts (the network with the old name) and new network in the dc/cluster that is not attached to any host.
Alona.
On Sun, Feb 19, 2017 at 12:28 PM, Matt . <yamakasi.014@gmail.com> wrote:
Hi Micheal,
OK, thanks for this, but what if I change them in the Database and resync ? As ovirtmgmt is seperate it should be able to control the hosts.
I'm curious about that as I think that should work.
Thanks,
Matt
2017-02-19 10:30 GMT+01:00 Michael Burman <mburman@redhat.com>:
Hi again
This can't be changed. When the network attached to host, it is used by vdsm and has a vdsm-'network-name' which in use. When it used by a VM, virsh using this name, so you can't change it, unless removing and detaching the network from VM and host.
Best regards,
On Fri, Feb 17, 2017 at 12:17 PM, Matt . <yamakasi.014@gmail.com> wrote:
OK, I just found out that it's not possible to change the network name when the network is attached to VM's as well. I wonder why that is because for VM's it's only DB stuff being done.
Can't this be changed ?
Thanks,
Matt
2017-02-16 13:58 GMT+01:00 Matt . <yamakasi.014@gmail.com>:
Hi,
OK good to know. Why would it not be possible to change the name as well ? I think it's not that difficult in the same command ?
Cheers,
Matt
2017-02-16 13:54 GMT+01:00 Michael Burman <mburman@redhat.com>: > Hi Matt > > Are you trying to change the network's name? if this is the case, > then > it > doesn't allowed while network is attached to host/s. > > Yes, it is a bug in the error message when trying to rename network > while it > is attached to multiple hosts. I will report a bug for this issue. > > Thanks! > > On Thu, Feb 16, 2017 at 2:41 PM, Matt . <yamakasi.014@gmail.com> > wrote: >> >> Hi Micheal, >> >> I trying pro process the change the issue is that I still get the >> message (with some variable bug in it) that some hosts have the >> logical network in usage. Is this Only on the name of the network ? >> >> I'm on Ovirt 4.0.6 >> >> Error while executing action: Cannot edit Network. This logical >> network is used by hosts: >> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}): >> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST} >> - Please detach hosts using this logical network and try again. >> >> Thanks, >> >> Matt >> >> 2017-02-15 9:46 GMT+01:00 Matt . <yamakasi.014@gmail.com>: >> > HI Micheal, >> > >> > Thanks! it looks like it's what I need, checking out! >> > >> > Thank you very much! >> > >> > Matt >> > >> > 2017-02-15 7:12 GMT+01:00 Michael Burman <mburman@redhat.com>: >> >> Check this feature page as well) >> >> >> >> >> >> >> >> >> >> http://www.ovirt.org/develop/release-management/features/network/multihostne... >> >> >> >> >> >> >> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman >> >> <mburman@redhat.com> >> >> wrote: >> >>> >> >>> Hello Matt >> >>> >> >>> Yes, there is a way, it can be done as part of our MultiHost >> >>> Network >> >>> feature(since 3.4). >> >>> If you have the same logical network attached to multiple hosts >> >>> in >> >>> your >> >>> DC, you can update their vlan IDs via the 'Networks' main tab >> >>> and >> >>> this >> >>> will >> >>> send a setup networks command through all of your hosts in the >> >>> DC >> >>> and >> >>> update >> >>> the logical network with the new vlan ID. >> >>> - Note that this can be done when the VMs are running on the >> >>> host/s as >> >>> well. >> >>> >> >>> Good luck) >> >>> >> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt . >> >>> <yamakasi.014@gmail.com> >> >>> wrote: >> >>>> >> >>>> Hi Guys, >> >>>> >> >>>> Is there a way to change Vlan ID's which are connected to the >> >>>> Hosts >> >>>> when the VM's on it are down ? >> >>>> >> >>>> As i need to change a lot of them it would be create if the >> >>>> engine >> >>>> can >> >>>> perform some process which allows me to hammer my hosts with >> >>>> the >> >>>> new >> >>>> vlan ID's for their bridges. >> >>>> >> >>>> I hope someone has an idea. >> >>>> >> >>>> Thanks! >> >>>> >> >>>> Matt >> >>>> _______________________________________________ >> >>>> Users mailing list >> >>>> Users@ovirt.org >> >>>> http://lists.ovirt.org/mailman/listinfo/users >> >>> >> >>> >> >>> >> >>> >> >>> -- >> >>> Michael Burman >> >>> RedHat Israel, RHV-M Network QE >> >>> >> >>> Mobile: 054-5355725 >> >>> IRC: mburman >> >> >> >> >> >> >> >> >> >> -- >> >> Michael Burman >> >> RedHat Israel, RHV-M Network QE >> >> >> >> Mobile: 054-5355725 >> >> IRC: mburman > > > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (3)
-
Alona Kaplan -
Matt . -
Michael Burman