Do you really use Cinderlib ? If so , I think that someone of the DEv should take a look at: [ ERROR ] Failed to execute stage 'Environment setup': Cannot connect to ovirt cinderlib database using existing credentials: ovirt_cinderlib@localhost:5432

Best Regards, Strahil Nikolov В понеделник, 1 юли 2019 г., 9:42:18 ч. Гринуич-4, Christoph Köhler < koehler(a)luis.uni-hannover.de&gt; написа: Hello, we tried to migrate the hosted engine to a new storage but we ran into an error - in any attempt the same. What we did is: ° Version 4.3.4.3-1.el7 ° in the engine vm: systemctl stop ovirt-engine ° took backup with scope=all ° hosted-engine --set-maintenance --mode=global ° hosted-engine --vm-shutdown ° on a new host (not in the inventory of engineDB): hosted-engine ---deploy --restore-from-file=backup-file It ran fine until: // ERROR ] fatal: [localhost -> newhost]: FAILED! => {"changed": true, "cmd": ["engine-setup", "--accept-defaults", "--config-append=/root/ovirt-engine-answers", "--offline"], "delta": "0:00:00.801074", "end": "2019-06-27 12:13:49.157140", "msg": "non-zero return code", "rc": 1, "start": "2019-06-27 12:13:48.356066", "stderr": "", "stderr_lines": [], "stdout": "[ INFO ] Stage: Initializing\n[ INFO ] Stage: Environment setup\n Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/root/ovirt-engine-answers']\n Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log\n Version: otopi-1.8.2 (otopi-1.8.2-1.el7)\n[ ERROR ] Failed to execute stage 'Environment setup': Cannot connect to ovirt cinderlib database using existing credentials: ovirt_cinderlib@localhost:5432\n[ INFO ] Stage: Clean up\n Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log\n[ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20190627121349-setup.conf'\n[ INFO ] Stage: Pre-termination\n[ INFO ] Stage: Termination\n[ ERROR ] Execution of setup failed", "stdout_lines": ["[ INFO ] Stage: Initializing", "[ INFO ] Stage: Environment setup", " Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', '/root/ovirt-engine-answers']", " Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log", " Version: otopi-1.8.2 (otopi-1.8.2-1.el7)", "[ ERROR ] Failed to execute stage 'Environment setup': Cannot connect to ovirt cinderlib database using existing credentials: ovirt_cinderlib@localhost:5432", "[ INFO ] Stage: Clean up", " Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log", "[ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20190627121349-setup.conf'", "[ INFO ] Stage: Pre-termination", "[ INFO ] Stage: Termination", "[ ERROR ] Execution of setup failed"]} // The user and password hashes are okay and the same on old_engine and restore_file. Any ideas? regards, Chris _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BUCERUSB4PU... _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6CACNJX6KOR...

Hello! No, I do not use cinderlib!

It may be, that the restore process want to activate cinder per default in the new engine. So it could not find it's counterpart in die backup-file. If so, there should be an option like --no-cinder or so for the restore process. We continue testing... Greetings! On 01.07.19 17:53, Strahil Nikolov wrote: > Do you really use Cinderlib ? > > If so , I think that someone of the DEv should take a look at: > [ ERROR ] Failed to > execute stage 'Environment setup': Cannot connect to ovirt cinderlib > database using existing credentials: ovirt_cinderlib@localhost > <mailto:ovirt_cinderlib@localhost>:5432 > > Best Regards, > Strahil Nikolov > > В понеделник, 1 юли 2019 г., 9:42:18 ч. Гринуич-4, Christoph Köhler > <koehler(a)luis.uni-hannover.de&gt; написа: > > > Hello, > > we tried to migrate the hosted engine to a new storage but we ran into > an error - in any attempt the same. > > What we did is: > > ° Version 4.3.4.3-1.el7 > ° in the engine vm: systemctl stop ovirt-engine > ° took backup with scope=all > ° hosted-engine --set-maintenance --mode=global > ° hosted-engine --vm-shutdown > ° on a new host (not in the inventory of engineDB): hosted-engine > ---deploy --restore-from-file=backup-file > > It ran fine until: > > // > ERROR ] fatal: [localhost -> newhost]: FAILED! => {"changed": true, > "cmd": ["engine-setup", "--accept-defaults", > "--config-append=/root/ovirt-engine-answers", "--offline"], "delta": > "0:00:00.801074", "end": "2019-06-27 12:13:49.157140", "msg": "non-zero > return code", "rc": 1, "start": "2019-06-27 12:13:48.356066", "stderr": > "", "stderr_lines": [], "stdout": "[ INFO ] Stage: Initializing\n[ INFO > ] Stage: Environment setup\n Configuration files: > ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', > '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', > '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', > '/root/ovirt-engine-answers']\n Log file: > /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log\n > Version: otopi-1.8.2 (otopi-1.8.2-1.el7)\n[ ERROR ] Failed to > execute stage 'Environment setup': Cannot connect to ovirt cinderlib > database using existing credentials: ovirt_cinderlib@localhost > <mailto:ovirt_cinderlib@localhost>:5432\n[ > INFO ] Stage: Clean up\n Log file is located at > /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log\n[ > INFO ] Generating answer file > '/var/lib/ovirt-engine/setup/answers/20190627121349-setup.conf'\n[ INFO > ] Stage: Pre-termination\n[ INFO ] Stage: Termination\n[ ERROR ] > Execution of setup failed", "stdout_lines": ["[ INFO ] Stage: > Initializing", "[ INFO ] Stage: Environment setup", " > Configuration files: > ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', > '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', > '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf', > '/root/ovirt-engine-answers']", " Log file: > /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log", > " Version: otopi-1.8.2 (otopi-1.8.2-1.el7)", "[ ERROR ] Failed > to execute stage 'Environment setup': Cannot connect to ovirt cinderlib > database using existing credentials: ovirt_cinderlib@localhost > <mailto:ovirt_cinderlib@localhost>:5432", "[ > INFO ] Stage: Clean up", " Log file is located at > /var/log/ovirt-engine/setup/ovirt-engine-setup-20190627121348-48b6rw.log", > "[ INFO ] Generating answer file > '/var/lib/ovirt-engine/setup/answers/20190627121349-setup.conf'", "[ > INFO ] Stage: Pre-termination", "[ INFO ] Stage: Termination", "[ > ERROR ] Execution of setup failed"]} > // > > The user and password hashes are okay and the same on old_engine and > restore_file. > > Any ideas? > > regards, > Chris > > _______________________________________________ > Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org > <mailto:users-leave@ovirt.org> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BUCERUSB4PU... > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6CACNJX6KOR... > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XRRM2NMJREU...