I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso. When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server. But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine. I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node. Regards -- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify> Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339 hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14. If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
but which version can i used with hosted-engine iso, because i want it in production enviroment.. Regards On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339
hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14.
If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify> Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Which is the correct iso to do hosted-engine from ovirt-node image ¿? and do not loose any data after reboot http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ On Mon, Dec 22, 2014 at 11:44 AM, rino <villadalmine@gmail.com> wrote:
but which version can i used with hosted-engine iso, because i want it in production enviroment..
Regards
On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339
hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14.
If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify>
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify> Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Simone Tiraboschi" <stirabos@redhat.com> Cc: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:49:05 PM Subject: Re: [ovirt-users] Problem wiht ovirt-node
Which is the correct iso to do hosted-engine from ovirt-node image ¿? and do not loose any data after reboot
ovirt-3.5-pre/ was for 3.5 beta so it's quite old. You can find the latest node build at http://jenkins.ovirt.org/job/ovirt-node-iso_master_merged/ but it's just a nightly build and so it's still not that tested for production but you still can help us testing it. The general availability of 3.5.1 is due to the mid of January.
On Mon, Dec 22, 2014 at 11:44 AM, rino <villadalmine@gmail.com> wrote:
but which version can i used with hosted-engine iso, because i want it in production enviroment..
Regards
On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release ovirt-node 3.5 iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339
hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14.
If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify>
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA <https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify>
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
Looks like that 12/22 ISO doesn't run the installer that I can tell. I really haven't had any good luck with any of the recent ovirt-node stuff which is such a shame. My last installation using the 3.5-pre ISO would install and then fail at grub/boot afterwards. I'm not sure if I'm doing something wrong there, but I'm more or less taking all defaults in the install, so it is unexpected. I feel like enterprise-level virtualization relies upon having the minimal OS/install in order to match the other hypervisors. I hate to think of just going to minimal CentOS/RHEL installs, but perhaps that's my best bet to get up and testing. What can the community do to help this along? Perhaps requiring equivalent ovirt-node releases along with every release of ovirt may put the motivation behind it? I'm willing to help test, however I can't put my original environment in a constant state of change, obviously. I'm willing to build up some scenarios if that helps get to a stable/installable/functioning ovirt-node. Those of us trying to prove this out vs. vmware/ESX need this. Chris On Mon, Dec 22, 2014 at 10:00 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Simone Tiraboschi" <stirabos@redhat.com> Cc: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:49:05 PM Subject: Re: [ovirt-users] Problem wiht ovirt-node
Which is the correct iso to do hosted-engine from ovirt-node image ¿? and do not loose any data after reboot
ovirt-3.5-pre/ was for 3.5 beta so it's quite old. You can find the latest node build at http://jenkins.ovirt.org/job/ovirt-node-iso_master_merged/ but it's just a nightly build and so it's still not that tested for production but you still can help us testing it.
The general availability of 3.5.1 is due to the mid of January.
On Mon, Dec 22, 2014 at 11:44 AM, rino <villadalmine@gmail.com> wrote:
but which version can i used with hosted-engine iso, because i want it in production enviroment..
Regards
On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi < stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release
ovirt-node
3.5
iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339
hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14.
If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA < https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA < https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Hey Chhristopher, please see my inline replies. ----- Original Message -----
Looks like that 12/22 ISO doesn't run the installer that I can tell. I really haven't had any good luck with any of the recent ovirt-node stuff which is such a shame. My last installation using the 3.5-pre ISO would install and then fail at grub/boot afterwards. I'm not sure if I'm doing something wrong there, but I'm more or less taking all defaults in the install, so it is unexpected.
Can you give some details on the exact failure? Besides that we know (and this is actually the reason why there is still no official Node 3.5 release) that there are issues with a lot of hardware, due to changes to udev, device-mapper, multipath, and kernel. And it took some time to really identify and solve those issues with changes in our code. Some recent patches (which landed just before and after christmas), are addressing these issues. We are currently in progress of giving this patches some wider testing, but we are optimistic that these changes will address most of the hardware problems. And we'll also do another scratch build to allow you to test those patches as well.
I feel like enterprise-level virtualization relies upon having the minimal OS/install in order to match the other hypervisors. I hate to think of just going to minimal CentOS/RHEL installs, but perhaps that's my best bet to get up and testing.
What can the community do to help this along? Perhaps requiring equivalent ovirt-node releases along with every release of ovirt may put the motivation behind it? I'm willing to help test, however I can't put my original environment in a constant state of change, obviously. I'm willing to build up some scenarios if that helps get to a stable/installable/functioning ovirt-node. Those of us trying to prove this out vs. vmware/ESX need this.
There are many ways to help. Testing - like you did - are an important (but sometimes painful) aspect, and I really appreciate that you continue to test! So as mentioned above, there will be a new scratch build with more fixes related to hardware support, and please watch this list for the link to the build. That build will also pickup some recent hosted-engine fixes. Thanks fabian
Chris
On Mon, Dec 22, 2014 at 10:00 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Simone Tiraboschi" <stirabos@redhat.com> Cc: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:49:05 PM Subject: Re: [ovirt-users] Problem wiht ovirt-node
Which is the correct iso to do hosted-engine from ovirt-node image ¿? and do not loose any data after reboot
ovirt-3.5-pre/ was for 3.5 beta so it's quite old. You can find the latest node build at http://jenkins.ovirt.org/job/ovirt-node-iso_master_merged/ but it's just a nightly build and so it's still not that tested for production but you still can help us testing it.
The general availability of 3.5.1 is due to the mid of January.
On Mon, Dec 22, 2014 at 11:44 AM, rino <villadalmine@gmail.com> wrote:
but which version can i used with hosted-engine iso, because i want it in production enviroment..
Regards
On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi < stirabos@redhat.com> wrote:
----- Original Message -----
From: "rino" <villadalmine@gmail.com> To: "Users@ovirt.org List" <users@ovirt.org> Sent: Monday, December 22, 2014 3:14:36 PM Subject: [ovirt-users] Problem wiht ovirt-node
I installed ovirt node with hosted-engine using pre-release
ovirt-node
3.5
iso.
When i shutdown the ovirt-node from menu everything down ok, ( i register it as node in vm ). When i turn on the server next day, ovirt-node come up with no vm was installed ( i use other server as storage with nfs). Nfs is working fine i see all resource if i do showmount -e nfs.server.
But if i try to do hosted-engine --vm-status or any command with hosted-engine it suggest me to do a new deploy, but i have all enviroment configured en my engine.
I need to configure two ovirt-node, and then move it to datacenter, but after shutdown vm engine is not seen by ovirt-node.
It's a know bug, it was recently fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1151339
hosted-engine in 3.5.1 will include this fix. General availability it's scheduled for 2015-01-14.
If you want to test it, you can try with a recent snapshot. http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
Feel free to add your self for oVirt 3.5.1 TestDay: https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
regards, Simone
Regards
-- --- Rondan Rino Certificado en LPIC-2 LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA
Blog: http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA < https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
-- --- Rondan Rino Certificado en LPIC-2 <https://cs.lpi.org/caf/Xamman/certification> LPI ID:LPI000209832 Verification Code:gbblvwyfxu Red Hat Certified Engineer -- RHCE -- RHCVA < https://www.redhat.com/wapps/training/certification/verify.html?certNumber=120-175-658&verify=Verify
Blog:http://www.itrestauracion.com.ar Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/> http://counter.li.org Linux User -> #517918 Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (4)
-
Christopher Young -
Fabian Deutsch -
rino -
Simone Tiraboschi