5:43 a.m.
Hello,
I have problems with installing ovirt node (2.6.1). I think, it fails
during grub install. The only ERROR in ovirt.log is "Root partition not
found". I booted to live-cd and running from it fine, but I want to try
to run installation, but I dont know which command to run to install.
Do anybody know?
Thank you,
Jakub Bittner
8:17 a.m.
On 07/22/2013 06:43 AM, Jakub Bittner wrote:
Hello,
I have problems with installing ovirt node (2.6.1). I think, it fails
during grub install. The only ERROR in ovirt.log is "Root partition not
found". I booted to live-cd and running from it fine, but I want to try
to run installation, but I dont know which command to run to install.
Can you walk me through the process you went through to install?
Booting from cd should give you the installer. Once it installs, there
should be logs in either /var/log/ovirt*log and possibly in
/tmp/ovirt*log. If you can get those, then that will help debugging.
Thanks
Mike
Do anybody know?
Thank you,
Jakub Bittner
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:01 a.m.
Dne 22.7.2013 15:17, Mike Burns napsal(a):
On 07/22/2013 06:43 AM, Jakub Bittner wrote:
> Hello,
>
> I have problems with installing ovirt node (2.6.1). I think, it fails
> during grub install. The only ERROR in ovirt.log is "Root partition not
> found". I booted to live-cd and running from it fine, but I want to try
> to run installation, but I dont know which command to run to install.
Can you walk me through the process you went through to install?
Booting from cd should give you the installer. Once it installs,
there should be logs in either /var/log/ovirt*log and possibly in
/tmp/ovirt*log. If you can get those, then that will help debugging.
Thanks
Mike
>
> Do anybody know?
>
> Thank you,
> Jakub Bittner
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
Hello Mike,
last time it was little weird for me.... I put install cd and booted
ovirt 2.6.1 and choosed install in low graphics mode.
It went ok, i typed password and so, but it failed on 85% (I think
during grub install).
Then I switched booting mode from BIOS to UEFI, booted same iso and
strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I choose it
and then the CD booted into shell with admin login.
I tryed password from failed installation and it works. Thats little
strange. That is why I want to run install dialog to get some errors log
from failed install. I have been looking on failed install logs, but
only error was like can not find root partition.
9:03 a.m.
On 07/22/2013 10:01 AM, Jakub Bittner wrote:
Dne 22.7.2013 15:17, Mike Burns napsal(a):
> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>> Hello,
>>
>> I have problems with installing ovirt node (2.6.1). I think, it fails
>> during grub install. The only ERROR in ovirt.log is "Root partition not
>> found". I booted to live-cd and running from it fine, but I want to try
>> to run installation, but I dont know which command to run to install.
>
> Can you walk me through the process you went through to install?
> Booting from cd should give you the installer. Once it installs,
> there should be logs in either /var/log/ovirt*log and possibly in
> /tmp/ovirt*log. If you can get those, then that will help debugging.
>
> Thanks
>
> Mike
>
>>
>> Do anybody know?
>>
>> Thank you,
>> Jakub Bittner
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
Hello Mike,
last time it was little weird for me.... I put install cd and booted
ovirt 2.6.1 and choosed install in low graphics mode.
It went ok, i typed password and so, but it failed on 85% (I think
during grub install).
Then I switched booting mode from BIOS to UEFI, booted same iso and
strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I choose it
and then the CD booted into shell with admin login.
I tryed password from failed installation and it works. Thats little
strange. That is why I want to run install dialog to get some errors log
from failed install. I have been looking on failed install logs, but
only error was like can not find root partition.
Can you try booting in EFI mode again, but choose reinstall (or simply
add reinstall to the default command line)?
Mike
9:44 a.m.
Dne 22.7.2013 16:03, Mike Burns napsal(a):
On 07/22/2013 10:01 AM, Jakub Bittner wrote:
> Dne 22.7.2013 15:17, Mike Burns napsal(a):
>> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>>> Hello,
>>>
>>> I have problems with installing ovirt node (2.6.1). I think, it fails
>>> during grub install. The only ERROR in ovirt.log is "Root partition
>>> not
>>> found". I booted to live-cd and running from it fine, but I want to
>>> try
>>> to run installation, but I dont know which command to run to install.
>>
>> Can you walk me through the process you went through to install?
>> Booting from cd should give you the installer. Once it installs,
>> there should be logs in either /var/log/ovirt*log and possibly in
>> /tmp/ovirt*log. If you can get those, then that will help debugging.
>>
>> Thanks
>>
>> Mike
>>
>>>
>>> Do anybody know?
>>>
>>> Thank you,
>>> Jakub Bittner
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
> Hello Mike,
>
> last time it was little weird for me.... I put install cd and booted
> ovirt 2.6.1 and choosed install in low graphics mode.
> It went ok, i typed password and so, but it failed on 85% (I think
> during grub install).
> Then I switched booting mode from BIOS to UEFI, booted same iso and
> strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I choose it
> and then the CD booted into shell with admin login.
> I tryed password from failed installation and it works. Thats little
> strange. That is why I want to run install dialog to get some errors log
> from failed install. I have been looking on failed install logs, but
> only error was like can not find root partition.
Can you try booting in EFI mode again, but choose reinstall (or simply
add reinstall to the default command line)?
Mike
Hello Mike,
I did boot in EFI again with reinstall and I got blue console screen
with login (localhost login:)
5:19 p.m.
On 07/22/2013 10:44 AM, Jakub Bittner wrote:
Dne 22.7.2013 16:03, Mike Burns napsal(a):
> On 07/22/2013 10:01 AM, Jakub Bittner wrote:
>> Dne 22.7.2013 15:17, Mike Burns napsal(a):
>>> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>>>> Hello,
>>>>
>>>> I have problems with installing ovirt node (2.6.1). I think, it fails
>>>> during grub install. The only ERROR in ovirt.log is "Root partition
>>>> not
>>>> found". I booted to live-cd and running from it fine, but I want to
>>>> try
>>>> to run installation, but I dont know which command to run to install.
>>>
>>> Can you walk me through the process you went through to install?
>>> Booting from cd should give you the installer. Once it installs,
>>> there should be logs in either /var/log/ovirt*log and possibly in
>>> /tmp/ovirt*log. If you can get those, then that will help debugging.
>>>
>>> Thanks
>>>
>>> Mike
>>>
>>>>
>>>> Do anybody know?
>>>>
>>>> Thank you,
>>>> Jakub Bittner
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> Hello Mike,
>>
>> last time it was little weird for me.... I put install cd and booted
>> ovirt 2.6.1 and choosed install in low graphics mode.
>> It went ok, i typed password and so, but it failed on 85% (I think
>> during grub install).
>> Then I switched booting mode from BIOS to UEFI, booted same iso and
>> strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I choose it
>> and then the CD booted into shell with admin login.
>> I tryed password from failed installation and it works. Thats little
>> strange. That is why I want to run install dialog to get some errors log
>> from failed install. I have been looking on failed install logs, but
>> only error was like can not find root partition.
>
> Can you try booting in EFI mode again, but choose reinstall (or simply
> add reinstall to the default command line)?
>
> Mike
>
Hello Mike,
I did boot in EFI again with reinstall and I got blue console screen
with login (localhost login:)
can you boot with rootpw=<hashed_passwd> ?
<hashed_passwd> can be generated with
openssl passwd.
After you get to the login prompt, you can login as root with your
password. Then, can you capture the log files I mentioned above?
Thanks
Mike
12:56 a.m.
Dne 23.7.2013 00:19, Mike Burns napsal(a):
On 07/22/2013 10:44 AM, Jakub Bittner wrote:
> Dne 22.7.2013 16:03, Mike Burns napsal(a):
>> On 07/22/2013 10:01 AM, Jakub Bittner wrote:
>>> Dne 22.7.2013 15:17, Mike Burns napsal(a):
>>>> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>>>>> Hello,
>>>>>
>>>>> I have problems with installing ovirt node (2.6.1). I think, it
>>>>> fails
>>>>> during grub install. The only ERROR in ovirt.log is "Root
partition
>>>>> not
>>>>> found". I booted to live-cd and running from it fine, but I want
to
>>>>> try
>>>>> to run installation, but I dont know which command to run to
>>>>> install.
>>>>
>>>> Can you walk me through the process you went through to install?
>>>> Booting from cd should give you the installer. Once it installs,
>>>> there should be logs in either /var/log/ovirt*log and possibly in
>>>> /tmp/ovirt*log. If you can get those, then that will help debugging.
>>>>
>>>> Thanks
>>>>
>>>> Mike
>>>>
>>>>>
>>>>> Do anybody know?
>>>>>
>>>>> Thank you,
>>>>> Jakub Bittner
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>> Hello Mike,
>>>
>>> last time it was little weird for me.... I put install cd and booted
>>> ovirt 2.6.1 and choosed install in low graphics mode.
>>> It went ok, i typed password and so, but it failed on 85% (I think
>>> during grub install).
>>> Then I switched booting mode from BIOS to UEFI, booted same iso and
>>> strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I
>>> choose it
>>> and then the CD booted into shell with admin login.
>>> I tryed password from failed installation and it works. Thats little
>>> strange. That is why I want to run install dialog to get some
>>> errors log
>>> from failed install. I have been looking on failed install logs, but
>>> only error was like can not find root partition.
>>
>> Can you try booting in EFI mode again, but choose reinstall (or simply
>> add reinstall to the default command line)?
>>
>> Mike
>>
> Hello Mike,
>
> I did boot in EFI again with reinstall and I got blue console screen
> with login (localhost login:)
can you boot with rootpw=<hashed_passwd> ?
<hashed_passwd> can be generated with
openssl passwd.
After you get to the login prompt, you can login as root with your
password. Then, can you capture the log files I mentioned above?
Thanks
Mike
I did.
/var/log/ovirt.log is here http://pastebin.com/SdrixevG
/tmp/ovirt.log is here http://pastebin.com/0b0Fj1sD
and
/tmp/ovirt.debug.log is here http://pastebin.com/YSjcxpDf
If there will be nothing, I can change boot from EFI to BIOS and post
logs from failed installation.
Thank you.
2:45 a.m.
This is a multi-part message in MIME format.
--------------020105010102060909060803
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dne 23.7.2013 07:56, Jakub Bittner napsal(a):
Dne 23.7.2013 00:19, Mike Burns napsal(a):
> On 07/22/2013 10:44 AM, Jakub Bittner wrote:
>> Dne 22.7.2013 16:03, Mike Burns napsal(a):
>>> On 07/22/2013 10:01 AM, Jakub Bittner wrote:
>>>> Dne 22.7.2013 15:17, Mike Burns napsal(a):
>>>>> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>>>>>> Hello,
>>>>>>
>>>>>> I have problems with installing ovirt node (2.6.1). I think, it
>>>>>> fails
>>>>>> during grub install. The only ERROR in ovirt.log is "Root
partition
>>>>>> not
>>>>>> found". I booted to live-cd and running from it fine, but I
want to
>>>>>> try
>>>>>> to run installation, but I dont know which command to run to
>>>>>> install.
>>>>>
>>>>> Can you walk me through the process you went through to install?
>>>>> Booting from cd should give you the installer. Once it installs,
>>>>> there should be logs in either /var/log/ovirt*log and possibly in
>>>>> /tmp/ovirt*log. If you can get those, then that will help
>>>>> debugging.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Mike
>>>>>
>>>>>>
>>>>>> Do anybody know?
>>>>>>
>>>>>> Thank you,
>>>>>> Jakub Bittner
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>> Hello Mike,
>>>>
>>>> last time it was little weird for me.... I put install cd and booted
>>>> ovirt 2.6.1 and choosed install in low graphics mode.
>>>> It went ok, i typed password and so, but it failed on 85% (I think
>>>> during grub install).
>>>> Then I switched booting mode from BIOS to UEFI, booted same iso and
>>>> strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I
>>>> choose it
>>>> and then the CD booted into shell with admin login.
>>>> I tryed password from failed installation and it works. Thats little
>>>> strange. That is why I want to run install dialog to get some
>>>> errors log
>>>> from failed install. I have been looking on failed install logs, but
>>>> only error was like can not find root partition.
>>>
>>> Can you try booting in EFI mode again, but choose reinstall (or simply
>>> add reinstall to the default command line)?
>>>
>>> Mike
>>>
>> Hello Mike,
>>
>> I did boot in EFI again with reinstall and I got blue console screen
>> with login (localhost login:)
>
> can you boot with rootpw=<hashed_passwd> ?
>
> <hashed_passwd> can be generated with
>
> openssl passwd.
>
> After you get to the login prompt, you can login as root with your
> password. Then, can you capture the log files I mentioned above?
>
> Thanks
>
> Mike
I did.
/var/log/ovirt.log is here http://pastebin.com/SdrixevG
/tmp/ovirt.log is here http://pastebin.com/0b0Fj1sD
and
/tmp/ovirt.debug.log is here http://pastebin.com/YSjcxpDf
If there will be nothing, I can change boot from EFI to BIOS and post
logs from failed installation.
Thank you.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
In meantime I ran ovirt-node-iso in BIOS mode on same testing server and
uploaded logs with failure. If you need more info or logs, this server
is still booted, so I can send it. Here is the log:
http://pastebin.com/hCkCVdTL (3 logs /tmp/ovirt.log and
/var/log/vdsm/vdsm.log and /var/log/libvirt.log)
--------------020105010102060909060803
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Dne 23.7.2013 07:56, Jakub Bittner
napsal(a):<br>
</div>
<blockquote cite="mid:51EE1B16.3050900@nbu.cz"
type="cite">Dne
23.7.2013 00:19, Mike Burns napsal(a):
<br>
<blockquote type="cite">On 07/22/2013 10:44 AM, Jakub Bittner
wrote:
<br>
<blockquote type="cite">Dne 22.7.2013 16:03, Mike Burns
napsal(a):
<br>
<blockquote type="cite">On 07/22/2013 10:01 AM, Jakub Bittner
wrote:
<br>
<blockquote type="cite">Dne 22.7.2013 15:17, Mike Burns
napsal(a):
<br>
<blockquote type="cite">On 07/22/2013 06:43 AM, Jakub
Bittner wrote:
<br>
<blockquote type="cite">Hello,
<br>
<br>
I have problems with installing ovirt node (2.6.1). I
think, it fails
<br>
during grub install. The only ERROR in ovirt.log is
"Root partition
<br>
not
<br>
found". I booted to live-cd and running from it fine,
but I want to
<br>
try
<br>
to run installation, but I dont know which command to
run to install.
<br>
</blockquote>
<br>
Can you walk me through the process you went through to
install?
<br>
Booting from cd should give you the installer. Once it
installs,
<br>
there should be logs in either /var/log/ovirt*log and
possibly in
<br>
/tmp/ovirt*log. If you can get those, then that will
help debugging.
<br>
<br>
Thanks
<br>
<br>
Mike
<br>
<br>
<blockquote type="cite">
<br>
Do anybody know?
<br>
<br>
Thank you,
<br>
Jakub Bittner
<br>
_______________________________________________
<br>
Users mailing list
<br>
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<br>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
<br>
</blockquote>
<br>
</blockquote>
Hello Mike,
<br>
<br>
last time it was little weird for me.... I put install cd
and booted
<br>
ovirt 2.6.1 and choosed install in low graphics mode.
<br>
It went ok, i typed password and so, but it failed on 85%
(I think
<br>
during grub install).
<br>
Then I switched booting mode from BIOS to UEFI, booted
same iso and
<br>
strange grub dialog occurs (with only boot oVirt 3.2.1 ),
so I choose it
<br>
and then the CD booted into shell with admin login.
<br>
I tryed password from failed installation and it works.
Thats little
<br>
strange. That is why I want to run install dialog to get
some errors log
<br>
from failed install. I have been looking on failed install
logs, but
<br>
only error was like can not find root partition.
<br>
</blockquote>
<br>
Can you try booting in EFI mode again, but choose reinstall
(or simply
<br>
add reinstall to the default command line)?
<br>
<br>
Mike
<br>
<br>
</blockquote>
Hello Mike,
<br>
<br>
I did boot in EFI again with reinstall and I got blue console
screen
<br>
with login (localhost login:)
<br>
</blockquote>
<br>
can you boot with rootpw=<hashed_passwd> ?
<br>
<br>
<hashed_passwd> can be generated with
<br>
<br>
openssl passwd.
<br>
<br>
After you get to the login prompt, you can login as root with
your password. Then, can you capture the log files I mentioned
above?
<br>
<br>
Thanks
<br>
<br>
Mike
<br>
</blockquote>
<br>
<br>
I did.
<br>
<br>
/var/log/ovirt.log is here <a class="moz-txt-link-freetext"
href="http://pastebin.com/SdrixevG">http://pastebin.com/Sdri...
<br>
/tmp/ovirt.log is here <a class="moz-txt-link-freetext"
href="http://pastebin.com/0b0Fj1sD">http://pastebin.com/0b0F...
<br>
and
<br>
/tmp/ovirt.debug.log is here <a class="moz-txt-link-freetext"
href="http://pastebin.com/YSjcxpDf">http://pastebin.com/YSjc...
<br>
<br>
If there will be nothing, I can change boot from EFI to BIOS and
post logs from failed installation.
<br>
<br>
Thank you.
<br>
_______________________________________________
<br>
Users mailing list
<br>
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<br>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
<br>
</blockquote>
<br>
In meantime I ran ovirt-node-iso in BIOS mode on same testing server
and uploaded logs with failure. If you need more info or logs, this
server is still booted, so I can send it. Here is the log:
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
<a
href="http://pastebin.com/hCkCVdTL">http://pastebin.com/hCkC...
(3 logs /tmp/ovirt.log and /var/log/vdsm/vdsm.log and
/var/log/libvirt.log)<br>
<br>
<br>
</body>
</html>
--------------020105010102060909060803--
7:05 a.m.
On 07/23/2013 01:56 AM, Jakub Bittner wrote:
Dne 23.7.2013 00:19, Mike Burns napsal(a):
> On 07/22/2013 10:44 AM, Jakub Bittner wrote:
>> Dne 22.7.2013 16:03, Mike Burns napsal(a):
>>> On 07/22/2013 10:01 AM, Jakub Bittner wrote:
>>>> Dne 22.7.2013 15:17, Mike Burns napsal(a):
>>>>> On 07/22/2013 06:43 AM, Jakub Bittner wrote:
>>>>>> Hello,
>>>>>>
>>>>>> I have problems with installing ovirt node (2.6.1). I think, it
>>>>>> fails
>>>>>> during grub install. The only ERROR in ovirt.log is "Root
partition
>>>>>> not
>>>>>> found". I booted to live-cd and running from it fine, but I
want to
>>>>>> try
>>>>>> to run installation, but I dont know which command to run to
>>>>>> install.
>>>>>
>>>>> Can you walk me through the process you went through to install?
>>>>> Booting from cd should give you the installer. Once it installs,
>>>>> there should be logs in either /var/log/ovirt*log and possibly in
>>>>> /tmp/ovirt*log. If you can get those, then that will help
debugging.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Mike
>>>>>
>>>>>>
>>>>>> Do anybody know?
>>>>>>
>>>>>> Thank you,
>>>>>> Jakub Bittner
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>> Hello Mike,
>>>>
>>>> last time it was little weird for me.... I put install cd and booted
>>>> ovirt 2.6.1 and choosed install in low graphics mode.
>>>> It went ok, i typed password and so, but it failed on 85% (I think
>>>> during grub install).
>>>> Then I switched booting mode from BIOS to UEFI, booted same iso and
>>>> strange grub dialog occurs (with only boot oVirt 3.2.1 ), so I
>>>> choose it
>>>> and then the CD booted into shell with admin login.
>>>> I tryed password from failed installation and it works. Thats little
>>>> strange. That is why I want to run install dialog to get some
>>>> errors log
>>>> from failed install. I have been looking on failed install logs, but
>>>> only error was like can not find root partition.
>>>
>>> Can you try booting in EFI mode again, but choose reinstall (or simply
>>> add reinstall to the default command line)?
>>>
>>> Mike
>>>
>> Hello Mike,
>>
>> I did boot in EFI again with reinstall and I got blue console screen
>> with login (localhost login:)
>
> can you boot with rootpw=<hashed_passwd> ?
>
> <hashed_passwd> can be generated with
>
> openssl passwd.
>
> After you get to the login prompt, you can login as root with your
> password. Then, can you capture the log files I mentioned above?
>
> Thanks
>
> Mike
I did.
/var/log/ovirt.log is here http://pastebin.com/SdrixevG
/tmp/ovirt.log is here http://pastebin.com/0b0Fj1sD
and
/tmp/ovirt.debug.log is here http://pastebin.com/YSjcxpDf
If there will be nothing, I can change boot from EFI to BIOS and post
logs from failed installation.
No, nothing else. I'll look through these logs and see if I can figure
it out.
Thanks
Mike
Thank you.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4312
days inactive
4313
days old
8 comments
2 participants
participants (2)
-
Jakub Bittner -
Mike Burns