[hosted-engine] Setup broke host's network
Hi, I setup the host's network while installing CentOS 7 (GUI), so the network configuration is like this: eno1 --> bond0_slave1 --\ |--> bond0 eno2 --> bond0_slave2 --/ After I disabled NetworkManager and ran 'hosted-engine --deploy', the setup stuck at this line: [ INFO ] Configuring the management bridge Then the ssh connection is lost. I accessed the console and found this line after the line above: [ ERROR ] Failed to execute stage 'Misc configuration': Connection to storage server failed And the network is kinda break. I have to 1. delete MASTER=bond0 and SLAVE=yes line in ifcfg-eno{1,2} config files 2. re-config ifcfg-bond0 to get static IP 3. turnoff and delete ovirtmgmt bridge 4. restart the network in order to make it live again. Did this network configuration really break the setup or it was something else? If the network configuration is the cause, how can I proceed to install oVirt hosted-engine? I attached the answer file, installation log, vdsm.log and supervdsm.log with this email. Environment: - CentOS Linux release 7.2.1511 (Core) - ovirt-release36-003-1.noarch - ovirt-hosted-engine-setup-1.3.3.4-1.el7.centos.noarch - vdsm-4.17.23-1.el7.noarch Thank you, Wee --- ซอฟต์แวร์ Avast แอนตี้ไวรัสตรวจสอบหาไวรัสจากอีเมลนี้แล้ว https://www.avast.com/antivirus
On Thu, Mar 17, 2016 at 11:34 AM, Wee Sritippho <wee.s@forest.go.th> wrote:
Hi,
I setup the host's network while installing CentOS 7 (GUI), so the network configuration is like this:
eno1 --> bond0_slave1 --\ |--> bond0 eno2 --> bond0_slave2 --/
After I disabled NetworkManager and ran 'hosted-engine --deploy', the setup stuck at this line:
[ INFO ] Configuring the management bridge
Then the ssh connection is lost. I accessed the console and found this line after the line above:
[ ERROR ] Failed to execute stage 'Misc configuration': Connection to storage server failed
From the logs I saw that you tried to deploy on GlusterFS using the host where you are deploying hosted-engine host also for gluster: this setup is called hyper-converged but it's currently not supported, please wait for
Hi Wee, from the log it seams that the network configuration worked as expected. Your issue was different: 'Connection to storage server failed' simply means that your host lost its connection with the storage server in the middle of the deployment. the next major release to deploy in this scenario. In the mean time you can deploy hosted-engine pointing it to a gluster volume on other external hosts or with another storage type.
And the network is kinda break. I have to 1. delete MASTER=bond0 and SLAVE=yes line in ifcfg-eno{1,2} config files 2. re-config ifcfg-bond0 to get static IP 3. turnoff and delete ovirtmgmt bridge 4. restart the network in order to make it live again.
Did this network configuration really break the setup or it was something else? If the network configuration is the cause, how can I proceed to install oVirt hosted-engine?
I attached the answer file, installation log, vdsm.log and supervdsm.log with this email.
Environment: - CentOS Linux release 7.2.1511 (Core) - ovirt-release36-003-1.noarch - ovirt-hosted-engine-setup-1.3.3.4-1.el7.centos.noarch - vdsm-4.17.23-1.el7.noarch
Thank you, Wee
--- ซอฟต์แวร์ Avast แอนตี้ไวรัสตรวจสอบหาไวรัสจากอีเมลนี้แล้ว https://www.avast.com/antivirus
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (2)
-
Simone Tiraboschi -
Wee Sritippho