12:32 p.m.
When I try to activate a host to the engine I get the error non responsive.
I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
12:33 p.m.
check iptables.
in any case, you have a communication problem between the engine and the
hosts.
when engine cannot get status on the vdsm, hosts will move to
non-responsive.
On 01/03/2014 06:32 PM, Zach Underwood wrote:
When I try to activate a host to the engine I get the error non
responsive. I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Dafna Ron
12:37 p.m.
I ran "iptables -F" on the engine and host no luck. The engine and the two
hosts are on the same /24 layer 2 network. I can ping both ways.
On Fri, Jan 3, 2014 at 1:33 PM, Dafna Ron <dron(a)redhat.com> wrote:
check iptables.
in any case, you have a communication problem between the engine and the
hosts.
when engine cannot get status on the vdsm, hosts will move to
non-responsive.
On 01/03/2014 06:32 PM, Zach Underwood wrote:
> When I try to activate a host to the engine I get the error non
> responsive. I can ping the hosts but I cant connect with ssh.
>
> oVirt Engine Version: 3.3.2-1.el6
>
> ovirt-node-iso-3.0.3-1.1.vdsm.fc19
>
>
>
>
> --
> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
> My website <http://zachunderwood.me>
> My photos <http://zunder1990.openphoto.me>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
12:39 p.m.
before you wrote that you can't ping but you can ssh so that's a
progress :)
look at the engine log and check the vdsm service status on the host
(you can even restart it)
On 01/03/2014 06:37 PM, Zach Underwood wrote:
I ran "iptables -F" on the engine and host no luck. The
engine and the
two hosts are on the same /24 layer 2 network. I can ping both ways.
On Fri, Jan 3, 2014 at 1:33 PM, Dafna Ron <dron(a)redhat.com
<mailto:dron@redhat.com>> wrote:
check iptables.
in any case, you have a communication problem between the engine
and the hosts.
when engine cannot get status on the vdsm, hosts will move to
non-responsive.
On 01/03/2014 06:32 PM, Zach Underwood wrote:
When I try to activate a host to the engine I get the error
non responsive. I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Dafna Ron
12:44 p.m.
Here are the two errors from engine.log
"2014-01-03 13:40:19,348 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-78) Command GetCapabilitiesVDS execution
failed. Exception: VDSNetworkException: java.net.ConnectException:
Connection refused
2014-01-03 13:40:20,459 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-86) Command GetCapabilitiesVDS execution
failed. Exception: VDSNetworkException:
sun.security.provider.certpath.SunCertPathBuilderException: unable to find
valid certification path to requested target"
I dont have a vdsm service on the nodes. I see a vhostmd is that the same?
On Fri, Jan 3, 2014 at 1:39 PM, Dafna Ron <dron(a)redhat.com> wrote:
before you wrote that you can't ping but you can ssh so
that's a progress
:)
look at the engine log and check the vdsm service status on the host (you
can even restart it)
On 01/03/2014 06:37 PM, Zach Underwood wrote:
> I ran "iptables -F" on the engine and host no luck. The engine and the
> two hosts are on the same /24 layer 2 network. I can ping both ways.
>
>
> On Fri, Jan 3, 2014 at 1:33 PM, Dafna Ron <dron(a)redhat.com <mailto:
> dron(a)redhat.com>> wrote:
>
> check iptables.
> in any case, you have a communication problem between the engine
> and the hosts.
> when engine cannot get status on the vdsm, hosts will move to
> non-responsive.
>
>
>
> On 01/03/2014 06:32 PM, Zach Underwood wrote:
>
> When I try to activate a host to the engine I get the error
> non responsive. I can ping the hosts but I cant connect with ssh.
>
> oVirt Engine Version: 3.3.2-1.el6
>
> ovirt-node-iso-3.0.3-1.1.vdsm.fc19
>
>
>
>
> -- Zach Underwood (RHCE,RHCSA,RHCT,UACA)
> My website <http://zachunderwood.me>
> My photos <http://zunder1990.openphoto.me>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> -- Dafna Ron
>
>
>
>
> --
> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
> My website <http://zachunderwood.me>
> My photos <http://zunder1990.openphoto.me>
>
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
12:51 p.m.
--_000_2CB4E8C8E00E594EA06D4AC427E42992353482fabamailserverfab_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Zach,
I had a similar problem. I temporarily disabled SELinux on the hosts usin=
g "setenforce 0". Let me know if this helps.
All the best,
Oliver
Von: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] Im Auftrag vo=
n Zach Underwood
Gesendet: Freitag, 03. J=E4nner 2014 19:32
An: users(a)ovirt.org
Betreff: [Users] all hosts are Non responsive
When I try to activate a host to the engine I get the error non responsive.=
I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website<http://zachunderwood.me>
My photos<http://zunder1990.openphoto.me>
--_000_2CB4E8C8E00E594EA06D4AC427E42992353482fabamailserverfab_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word"
=
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml"
xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html;
charset=3Diso-8859-=
1">
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered
medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.E-MailFormatvorlage17
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 2.0cm 70.85pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"DE-AT" link=3D"blue" vlink=3D"purple">
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span
style=3D"font-size:11.0pt;font-family:"Ca=
libri","sans-serif";color:#1F497D;mso-fareast-language:EN-US=
">Zach,
<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"font-size:11.0pt;font-family:"Ca=
libri","sans-serif";color:#1F497D;mso-fareast-language:EN-US=
"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"
style=3D"font-size:11.0pt;font-=
family:"Calibri","sans-serif";color:#1F497D;mso-fareast=
-language:EN-US"> I had a similar problem. I temporarily disabled SEL=
inux on the hosts using “setenforce 0”. Let me know if this hel=
ps.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"
style=3D"font-size:11.0pt;font-=
family:"Calibri","sans-serif";color:#1F497D"><o:p> =
;</o:p></span></p>
<p class=3D"MsoNormal"><span
style=3D"font-size:11.0pt;font-family:"Ca=
libri","sans-serif";color:#1F497D">All the
best,<o:p></o:p><=
/span></p>
<p class=3D"MsoNormal"><span
style=3D"font-size:11.0pt;font-family:"Ca=
libri","sans-serif";color:#1F497D">Oliver<o:p></o:p></span><=
/p>
<p class=3D"MsoNormal"><span
style=3D"mso-fareast-language:EN-US"><o:p>&nbs=
p;</o:p></span></p>
<p class=3D"MsoNormal"><b><span lang=3D"DE"
style=3D"font-size:11.0pt;font-=
family:"Calibri","sans-serif"">Von:</span></b><span
lan=
g=3D"DE"
style=3D"font-size:11.0pt;font-family:"Calibri","sa=
ns-serif""> users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org]
<b>Im Auftrag von </b>Zach Underwood<br>
<b>Gesendet:</b> Freitag, 03. J=E4nner 2014 19:32<br>
<b>An:</b> users(a)ovirt.org<br>
<b>Betreff:</b> [Users] all hosts are Non
responsive<o:p></o:p></span></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<div>
<p class=3D"MsoNormal">When I try to activate a host to the
engine I g=
et the error non responsive. I can ping the hosts but I cant connect =
with ssh.<o:p></o:p></p>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<div>
<p class=3D"MsoNormal">oVirt Engine Version:
3.3.2-1.el6<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p
class=3D"MsoNormal">ovirt-node-iso-3.0.3-1.1.vdsm.fc19<o:p></o:p></p>
</div>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<div>
<table class=3D"MsoNormalTable" border=3D"0"
cellpadding=3D"0">
<tbody>
<tr>
<td style=3D"padding:.75pt .75pt .75pt .75pt"></td>
</tr>
</tbody>
</table>
</div>
<p class=3D"MsoNormal">-- <o:p></o:p></p>
<div>
<p class=3D"MsoNormal"><span
style=3D"font-family:"Arial","s=
ans-serif";color:black;background:white">Zach Underwood (RHCE,RHCSA,RH=
CT,UACA)</span><o:p></o:p></p>
<div>
<p class=3D"MsoNormal"><span
style=3D"font-family:"Arial","s=
ans-serif";color:black;background:white"><a
href=3D"http://zachunderwo=
od.me" target=3D"_blank">My
website</a></span><o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><a
href=3D"http://zunder1990.openphoto.me" target=3D=
"_blank"><span
style=3D"font-family:"Arial","sans-serif"=
;;color:black;background:white">My
photos</span></a><o:p></o:p></p>
</div>
</div>
</div>
</div>
</div>
</body>
</html>
--_000_2CB4E8C8E00E594EA06D4AC427E42992353482fabamailserverfab_--
12:55 p.m.
disable slinux=no change
On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver <Oliver.Albl(a)fabasoft.com>wrote:
Zach,
I had a similar problem. I temporarily disabled SELinux on the hosts
using “setenforce 0”. Let me know if this helps.
All the best,
Oliver
*Von:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *Im
Auftrag von *Zach Underwood
*Gesendet:* Freitag, 03. Jänner 2014 19:32
*An:* users(a)ovirt.org
*Betreff:* [Users] all hosts are Non responsive
When I try to activate a host to the engine I get the error non
responsive. I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
12:57 p.m.
what do you mean you don't have vdsm service?
did your host installation succeed?
On 01/03/2014 06:44 PM, Zach Underwood wrote:
Here are the two errors from engine.log
"2014-01-03 13:40:19,348 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-78) Command GetCapabilitiesVDS
execution failed. Exception: VDSNetworkException:
java.net.ConnectException: Connection refused
2014-01-03 13:40:20,459 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-86) Command GetCapabilitiesVDS
execution failed. Exception: VDSNetworkException:
sun.security.provider.certpath.SunCertPathBuilderException: unable to
find valid certification path to requested target"
I dont have a vdsm service on the nodes. I see a vhostmd is that the same?
On Fri, Jan 3, 2014 at 1:39 PM, Dafna Ron <dron(a)redhat.com
<mailto:dron@redhat.com>> wrote:
before you wrote that you can't ping but you can ssh so that's a
progress :)
look at the engine log and check the vdsm service status on the
host (you can even restart it)
On 01/03/2014 06:37 PM, Zach Underwood wrote:
I ran "iptables -F" on the engine and host no luck. The engine
and the two hosts are on the same /24 layer 2 network. I can
ping both ways.
On Fri, Jan 3, 2014 at 1:33 PM, Dafna Ron <dron(a)redhat.com
<mailto:dron@redhat.com> <mailto:dron@redhat.com
<mailto:dron@redhat.com>>> wrote:
check iptables.
in any case, you have a communication problem between the
engine
and the hosts.
when engine cannot get status on the vdsm, hosts will move to
non-responsive.
On 01/03/2014 06:32 PM, Zach Underwood wrote:
When I try to activate a host to the engine I get the
error
non responsive. I can ping the hosts but I cant
connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
-- Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
http://lists.ovirt.org/mailman/listinfo/users
-- Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Dafna Ron
12:59 p.m.
after reading logs on the node I found this
"vdsm vds error xml-rpc handler exception"
I installed the node from ISO named "ovirt-node-iso-3.0.3-1.1.vdsm.fc19"
On Fri, Jan 3, 2014 at 1:55 PM, Zach Underwood <zunder1990(a)gmail.com> wrote:
disable slinux=no change
On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver <Oliver.Albl(a)fabasoft.com>wrote:
> Zach,
>
>
>
> I had a similar problem. I temporarily disabled SELinux on the hosts
> using “setenforce 0”. Let me know if this helps.
>
>
>
> All the best,
>
> Oliver
>
>
>
> *Von:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *Im
> Auftrag von *Zach Underwood
> *Gesendet:* Freitag, 03. Jänner 2014 19:32
> *An:* users(a)ovirt.org
> *Betreff:* [Users] all hosts are Non responsive
>
>
>
> When I try to activate a host to the engine I get the error non
> responsive. I can ping the hosts but I cant connect with ssh.
>
>
>
> oVirt Engine Version: 3.3.2-1.el6
>
>
>
> ovirt-node-iso-3.0.3-1.1.vdsm.fc19
>
>
>
>
>
>
>
> --
>
> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>
> My website <http://zachunderwood.me>
>
> My photos <http://zunder1990.openphoto.me>
>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
1:03 p.m.
is the service up?
if vdsm is down or not installed than the engine will set host status as
non-responsive.
it seems as if there might have been an error during the host
installation? please look at the engine log and you should also have
deployment logs and see if everything was successful.
On 01/03/2014 06:59 PM, Zach Underwood wrote:
after reading logs on the node I found this
"vdsm vds error xml-rpc handler exception"
I installed the node from ISO named "ovirt-node-iso-3.0.3-1.1.vdsm.fc19"
On Fri, Jan 3, 2014 at 1:55 PM, Zach Underwood <zunder1990(a)gmail.com
<mailto:zunder1990@gmail.com>> wrote:
disable slinux=no change
On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver
<Oliver.Albl(a)fabasoft.com <mailto:Oliver.Albl@fabasoft.com>> wrote:
Zach,
I had a similar problem. I temporarily disabled SELinux on the
hosts using “setenforce 0”. Let me know if this helps.
All the best,
Oliver
*Von:*users-bounces@ovirt.org <mailto:users-bounces@ovirt.org>
[mailto:users-bounces@ovirt.org
<mailto:users-bounces@ovirt.org>] *Im Auftrag von *Zach Underwood
*Gesendet:* Freitag, 03. Jänner 2014 19:32
*An:* users(a)ovirt.org <mailto:users@ovirt.org>
*Betreff:* [Users] all hosts are Non responsive
When I try to activate a host to the engine I get the error
non responsive. I can ping the hosts but I cant connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Dafna Ron
1:04 p.m.
oh! and Oliver had issues before which were solved by a reboot of the
host - so were they rebooted after the installation?
On 01/03/2014 07:03 PM, Dafna Ron wrote:
is the service up?
if vdsm is down or not installed than the engine will set host status
as non-responsive.
it seems as if there might have been an error during the host
installation? please look at the engine log and you should also have
deployment logs and see if everything was successful.
On 01/03/2014 06:59 PM, Zach Underwood wrote:
> after reading logs on the node I found this
> "vdsm vds error xml-rpc handler exception"
>
> I installed the node from ISO named "ovirt-node-iso-3.0.3-1.1.vdsm.fc19"
>
>
> On Fri, Jan 3, 2014 at 1:55 PM, Zach Underwood <zunder1990(a)gmail.com
> <mailto:zunder1990@gmail.com>> wrote:
>
> disable slinux=no change
>
>
> On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver
> <Oliver.Albl(a)fabasoft.com <mailto:Oliver.Albl@fabasoft.com>> wrote:
>
> Zach,
>
> I had a similar problem. I temporarily disabled SELinux on the
> hosts using “setenforce 0”. Let me know if this helps.
>
> All the best,
>
> Oliver
>
> *Von:*users-bounces@ovirt.org <mailto:users-bounces@ovirt.org>
> [mailto:users-bounces@ovirt.org
> <mailto:users-bounces@ovirt.org>] *Im Auftrag von *Zach
> Underwood
> *Gesendet:* Freitag, 03. Jänner 2014 19:32
> *An:* users(a)ovirt.org <mailto:users@ovirt.org>
> *Betreff:* [Users] all hosts are Non responsive
>
> When I try to activate a host to the engine I get the error
> non responsive. I can ping the hosts but I cant connect with
> ssh.
>
> oVirt Engine Version: 3.3.2-1.el6
>
> ovirt-node-iso-3.0.3-1.1.vdsm.fc19
>
>
> --
> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>
> My website <http://zachunderwood.me>
>
> My photos <http://zunder1990.openphoto.me>
>
>
>
>
> -- Zach Underwood (RHCE,RHCSA,RHCT,UACA)
> My website <http://zachunderwood.me>
> My photos <http://zunder1990.openphoto.me>
>
>
>
>
> --
> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
> My website <http://zachunderwood.me>
> My photos <http://zunder1990.openphoto.me>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Dafna Ron
1:18 p.m.
I restarted the node and the engine and no change. Here is a list on the
services on the node(sorry for the screenshot I am using idrac)
[image: Inline image 1]
On Fri, Jan 3, 2014 at 2:04 PM, Dafna Ron <dron(a)redhat.com> wrote:
oh! and Oliver had issues before which were solved by a reboot of the
host
- so were they rebooted after the installation?
On 01/03/2014 07:03 PM, Dafna Ron wrote:
> is the service up?
> if vdsm is down or not installed than the engine will set host status as
> non-responsive.
> it seems as if there might have been an error during the host
> installation? please look at the engine log and you should also have
> deployment logs and see if everything was successful.
>
> On 01/03/2014 06:59 PM, Zach Underwood wrote:
>
>> after reading logs on the node I found this
>> "vdsm vds error xml-rpc handler exception"
>>
>> I installed the node from ISO named
"ovirt-node-iso-3.0.3-1.1.vdsm.fc19"
>>
>>
>> On Fri, Jan 3, 2014 at 1:55 PM, Zach Underwood
<zunder1990(a)gmail.com<mailto:
>> zunder1990(a)gmail.com>> wrote:
>>
>> disable slinux=no change
>>
>>
>> On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver
>> <Oliver.Albl(a)fabasoft.com <mailto:Oliver.Albl@fabasoft.com>>
wrote:
>>
>> Zach,
>>
>> I had a similar problem. I temporarily disabled SELinux on the
>> hosts using “setenforce 0”. Let me know if this helps.
>>
>> All the best,
>>
>> Oliver
>>
>> *Von:*users-bounces@ovirt.org <mailto:users-bounces@ovirt.org>
>> [mailto:users-bounces@ovirt.org
>> <mailto:users-bounces@ovirt.org>] *Im Auftrag von *Zach
>> Underwood
>> *Gesendet:* Freitag, 03. Jänner 2014 19:32
>> *An:* users(a)ovirt.org <mailto:users@ovirt.org>
>> *Betreff:* [Users] all hosts are Non responsive
>>
>> When I try to activate a host to the engine I get the error
>> non responsive. I can ping the hosts but I cant connect with ssh.
>>
>> oVirt Engine Version: 3.3.2-1.el6
>>
>> ovirt-node-iso-3.0.3-1.1.vdsm.fc19
>>
>>
>> --
>> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>>
>> My website <http://zachunderwood.me>
>>
>> My photos <http://zunder1990.openphoto.me>
>>
>>
>>
>>
>> -- Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>> My website <http://zachunderwood.me>
>> My photos <http://zunder1990.openphoto.me>
>>
>>
>>
>>
>> --
>> Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>> My website <http://zachunderwood.me>
>> My photos <http://zunder1990.openphoto.me>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
2:44 p.m.
please re-install the hosts - I think your installation must have failed.
On 01/03/2014 07:18 PM, Zach Underwood wrote:
I restarted the node and the engine and no change. Here is a list on
the services on the node(sorry for the screenshot I am using idrac)
Inline image 1
On Fri, Jan 3, 2014 at 2:04 PM, Dafna Ron <dron(a)redhat.com
<mailto:dron@redhat.com>> wrote:
oh! and Oliver had issues before which were solved by a reboot of
the host - so were they rebooted after the installation?
On 01/03/2014 07:03 PM, Dafna Ron wrote:
is the service up?
if vdsm is down or not installed than the engine will set host
status as non-responsive.
it seems as if there might have been an error during the host
installation? please look at the engine log and you should
also have deployment logs and see if everything was successful.
On 01/03/2014 06:59 PM, Zach Underwood wrote:
after reading logs on the node I found this
"vdsm vds error xml-rpc handler exception"
I installed the node from ISO named
"ovirt-node-iso-3.0.3-1.1.vdsm.fc19"
On Fri, Jan 3, 2014 at 1:55 PM, Zach Underwood
<zunder1990(a)gmail.com <mailto:zunder1990@gmail.com>
<mailto:zunder1990@gmail.com
<mailto:zunder1990@gmail.com>>> wrote:
disable slinux=no change
On Fri, Jan 3, 2014 at 1:51 PM, Albl, Oliver
<Oliver.Albl(a)fabasoft.com
<mailto:Oliver.Albl@fabasoft.com>
<mailto:Oliver.Albl@fabasoft.com
<mailto:Oliver.Albl@fabasoft.com>>> wrote:
Zach,
I had a similar problem. I temporarily disabled
SELinux on the
hosts using “setenforce 0”. Let me know if this helps.
All the best,
Oliver
*Von:*users-bounces@ovirt.org
<mailto:users-bounces@ovirt.org>
<mailto:users-bounces@ovirt.org
<mailto:users-bounces@ovirt.org>>
[mailto:users-bounces@ovirt.org
<mailto:users-bounces@ovirt.org>
<mailto:users-bounces@ovirt.org
<mailto:users-bounces@ovirt.org>>] *Im Auftrag von *Zach
Underwood
*Gesendet:* Freitag, 03. Jänner 2014 19:32
*An:* users(a)ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
*Betreff:* [Users] all hosts are Non responsive
When I try to activate a host to the engine I get
the error
non responsive. I can ping the hosts but I cant
connect with ssh.
oVirt Engine Version: 3.3.2-1.el6
ovirt-node-iso-3.0.3-1.1.vdsm.fc19
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
-- Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--
Dafna Ron
--
Zach Underwood (RHCE,RHCSA,RHCT,UACA)
My website <http://zachunderwood.me>
My photos <http://zunder1990.openphoto.me>
--
Dafna Ron
3773
days inactive
3773
days old
12 comments
3 participants
participants (3)
-
Albl, Oliver -
Dafna Ron -
Zach Underwood