10:03 p.m.
This is a multi-part message in MIME format.
------=_NextPart_000_0001_01CEB317.E27BD8B0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
I created ovirt node ISO but it is not 100% right. Boots, media check is
fine, the UI executes, can select disk device as expected, enter password,
etc. When the install sequence starts. it just stops at 0% "Starting." then
nothing happens. Tried it with IDE, SATA, even SCSI, all local attached,
even tried it in a VM (nesting enabled, etc.), and same issue appears to
freeze. Jumping to alternate consoles, all blank. Tried to run install in
text mode, removed quiet and rhgb options from boot command-line, but the UI
takes over so no help. When I generated the ISO image, did not notice any
errors, source platform for ISO image was Fedora 19 minimal install plus all
the adds as outlined on the ovirt node build documentation web page. Anyone
run into the same odd issue? Am able to install Fedora 19 on same hardware,
so can't see why node install would fail, since am able to select disk
drive, but can't write to it? Very odd.
------=_NextPart_000_0001_01CEB317.E27BD8B0
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 12 =
(filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DEN-US
link=3Dblue =
vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal>I created =
ovirt node ISO but it is not 100% right. Boots, media check is =
fine, the UI executes, can select disk device as expected, enter =
password, etc. When the install sequence starts… it just =
stops at 0% “Starting…” then nothing happens. Tried it =
with IDE, SATA, even SCSI, all local attached, even tried it in a VM =
(nesting enabled, etc.), and same issue appears to freeze. Jumping =
to alternate consoles, all blank. Tried to run install in text =
mode, removed quiet and rhgb options from boot command-line, but the UI =
takes over so no help. When I generated the ISO image, did not =
notice any errors, source platform for ISO image was Fedora 19 minimal =
install plus all the adds as outlined on the ovirt node build =
documentation web page. Anyone run into the same odd issue? =
Am able to install Fedora 19 on same hardware, so can’t see why =
node install would fail, since am able to select disk drive, but =
can’t write to it? Very =
odd.<o:p></o:p></p></div></body></html>
------=_NextPart_000_0001_01CEB317.E27BD8B0--
8:13 a.m.
Am Montag, den 16.09.2013, 20:03 -0700 schrieb Schorschi:
I created ovirt node ISO but it is not 100% right. Boots, media
check
is fine, the UI executes, can select disk device as expected, enter
password, etc. When the install sequence starts… it just stops at 0%
“Starting…” then nothing happens. Tried it with IDE, SATA, even SCSI,
all local attached, even tried it in a VM (nesting enabled, etc.), and
same issue appears to freeze. Jumping to alternate consoles, all
blank. Tried to run install in text mode, removed quiet and rhgb
options from boot command-line, but the UI takes over so no help.
When I generated the ISO image, did not notice any errors, source
platform for ISO image was Fedora 19 minimal install plus all the adds
as outlined on the ovirt node build documentation web page. Anyone
run into the same odd issue? Am able to install Fedora 19 on same
hardware, so can’t see why node install would fail, since am able to
select disk drive, but can’t write to it? Very odd.
Hey,
could it be that you build the iso using the git master branch of that
day?
Because it sounds much like [0] (which is fixed by now, in master).
You should be able to build a working node using the release tags
(ovirt-node-3.0.1 is the latest). Building from master is not guaranteed
to produce a working iso.
Greetings
fabian
---
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1007811
4113
days inactive
4114
days old
1 comments
2 participants
participants (2)
-
Fabian Deutsch -
Schorschi