4:57 a.m.
As you are replacing an old brick, you have to recreate the old LV and mount it on the
same location.
Then you can use the gluster's "reset-brick" (i thing ovirt UI has that
option too) and all data will be replicated there.
You got also the "replace-brick" option if you decided to change the mount
location.
P.S.: with replica volumes your volume should be still working, in case it has stopped
- you have to investigate before proceeding.
Best Regards,
Strahil NikolovOn Oct 12, 2019 13:12, matteo fedeli <matmilan97(a)gmail.com> wrote:
Hi, I have in my ovirt HCI a volume that not work properly because one of three hdd fail.
I bought a new hdd, I recreate old lvm partitioning and mount point. Now, how can I attach
this empty new brick?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/U5XQ4M2K5RB...
6:47 a.m.
New subject: Damaged hard disk in volume replica gluster
doing reset-brick - get this error:
Errore durante l'esecuzione dell'azione Start Gluster Volume Reset Brick: Volume
reset brick start failed: rc=-1 out=() err=['brick:
asia_planet_bn:/gluster_bricks/data/data does not exist in volume: data']
6:50 a.m.
New subject: Damaged hard disk in volume replica gluster
What is the output of 'gluster volume info data' ?
Best Regards,Strahil Nikolov
В събота, 12 октомври 2019 г., 16:48:49 ч. Гринуич+3, matteo fedeli
<matmilan97(a)gmail.com> написа:
doing reset-brick - get this error:
Errore durante l'esecuzione dell'azione Start Gluster Volume Reset Brick: Volume
reset brick start failed: rc=-1 out=() err=['brick:
asia_planet_bn:/gluster_bricks/data/data does not exist in volume: data']
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RTN7MRXGWVL...
8:23 a.m.
New subject: Damaged hard disk in volume replica gluster
Volume Name: data
Type: Replicate
Volume ID: abcb0ee0-0e9d-4796-8d7d-143ea2692486
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: kansas.planet.bn:/gluster_bricks/data/data
Brick2: germany.planet.bn:/gluster_bricks/data/data
Brick3: singapore.planet.bn:/gluster_bricks/data/data
Options Reconfigured:
performance.client-io-threads: on
nfs.disable: on
transport.address-family: inet
performance.strict-o-direct: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.low-prio-threads: 32
network.remote-dio: off
cluster.eager-lock: enable
cluster.quorum-type: auto
cluster.server-quorum-type: server
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-max-threads: 8
cluster.shd-wait-qlength: 10000
features.shard: on
user.cifs: off
cluster.choose-local: off
client.event-threads: 4
server.event-threads: 4
network.ping-timeout: 30
storage.owner-uid: 36
storage.owner-gid: 36
cluster.granular-entry-heal: enable
diagnostics.latency-measurement: on
diagnostics.count-fop-hits: on
1:27 p.m.
New subject: Damaged hard disk in volume replica gluster
It seems that there is no 'asia_planet_bn:/gluster_bricks/data/data' in that
volume.Reset-brick expects that you have replaced the same brick and mounted it on the
same place (and is empty).If you want to replace with brick on another host - you should
use 'replace-brick' option .
Best Regards,Strahil Nikolov
В събота, 12 октомври 2019 г., 18:24:22 ч. Гринуич+3, matteo fedeli
<matmilan97(a)gmail.com> написа:
Volume Name: data
Type: Replicate
Volume ID: abcb0ee0-0e9d-4796-8d7d-143ea2692486
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: kansas.planet.bn:/gluster_bricks/data/data
Brick2: germany.planet.bn:/gluster_bricks/data/data
Brick3: singapore.planet.bn:/gluster_bricks/data/data
Options Reconfigured:
performance.client-io-threads: on
nfs.disable: on
transport.address-family: inet
performance.strict-o-direct: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.low-prio-threads: 32
network.remote-dio: off
cluster.eager-lock: enable
cluster.quorum-type: auto
cluster.server-quorum-type: server
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-max-threads: 8
cluster.shd-wait-qlength: 10000
features.shard: on
user.cifs: off
cluster.choose-local: off
client.event-threads: 4
server.event-threads: 4
network.ping-timeout: 30
storage.owner-uid: 36
storage.owner-gid: 36
cluster.granular-entry-heal: enable
diagnostics.latency-measurement: on
diagnostics.count-fop-hits: on
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G4QFBUIDY6A...
1:39 p.m.
New subject: Damaged hard disk in volume replica gluster
What do you mean by same place? before this hdd was on /dev/md0 now on /dev/sdc. Now if I
do lsblk the lvm configurantion and mount point are the same...
My target is replace a damaged hard disk, so on the same hosts.
1:56 p.m.
New subject: Damaged hard disk in volume replica gluster
According to your message you have these bricks:Bricks:
Brick1: kansas.planet.bn:/gluster_bricks/data/data
Brick2: germany.planet.bn:/gluster_bricks/data/data
Brick3: singapore.planet.bn:/gluster_bricks/data/data
And you tried to reset-brick 'asia.planet.bn:/gluster_bricks/data/data'which is
not in the brick list. The actual name of the device is not important , you just need to
mount it on the same location on the same server - otherwise you need the replace-brick
operation.As you haven't mention which brick is broken , I will give you a fictional
one.
For example,the disk/disks at server 'singapore.planet.bn' and mounted at
'/gluster_bricks/data/data' has broken.You replace the disk/disks and mount them
at same mount point, so server 'singapore.planet.bn' has a mounted block device at
'/gluster_bricks/data/data' and is completely empty.
Then you just run :
gluster volume reset-brick data singapore.planet.bn:/gluster_bricks/data/data startWhich
should stop the brick process (if you haven't rebooted the server)
gluster volume reset-brick
data singapore.planet.bn:/gluster_bricks/data/data singapore.planet.bn:/gluster_bricks/data/data
commit
To restart the processes. You may have to add "force" at the end.
And last ,force a heal:gluster volume heal data full
Best Regards,Strahil Nikolov
В събота, 12 октомври 2019 г., 23:40:49 ч. Гринуич+3, matteo fedeli
<matmilan97(a)gmail.com> написа:
What do you mean by same place? before this hdd was on /dev/md0 now on /dev/sdc. Now if I
do lsblk the lvm configurantion and mount point are the same...
My target is replace a damaged hard disk, so on the same hosts.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ASK42LHKCJA...
2:18 p.m.
New subject: Damaged hard disk in volume replica gluster
HI Strahil,
I am also running into an issue trying to replace a brick.
1.-/dev/sdd failed which is our /gluster_bricks/data2/data2 brick, hat disk was taken out
of the array controller and added a new one.
2.-there are quite a bit of entries related to /dev/sdd , i.e.
[root@host1]# dmsetup info |grep sdd
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd-tpool
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd_tdata
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd_tmeta
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd
Name: gluster_vg_sdd-gluster_lv_data2
this causes the OS to see the new disk as /dev/sde (the controller presents it as
/dev/sde)
array C
Logical Drive: 3
Size: 2.7 TB
...
Disk Name: /dev/sde
Mount Points: None
.....
Drive Type: Data
LD Acceleration Method: Controller Cache
If i just remove all the thinpool entries (if i find them) do you think that might do the
trick?
thanks,
Adrian
8:51 p.m.
New subject: Damaged hard disk in volume replica gluster
On February 18, 2020 12:18:24 AM GMT+02:00, adrianquintero(a)gmail.com wrote:
HI Strahil,
I am also running into an issue trying to replace a brick.
1.-/dev/sdd failed which is our /gluster_bricks/data2/data2 brick, hat
disk was taken out of the array controller and added a new one.
2.-there are quite a bit of entries related to /dev/sdd , i.e.
[root@host1]# dmsetup info |grep sdd
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd-tpool
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd_tdata
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd_tmeta
Name: gluster_vg_sdd-gluster_thinpool_gluster_vg_sdd
Name: gluster_vg_sdd-gluster_lv_data2
this causes the OS to see the new disk as /dev/sde (the controller
presents it as /dev/sde)
array C
Logical Drive: 3
Size: 2.7 TB
...
Disk Name: /dev/sde
Mount Points: None
.....
Drive Type: Data
LD Acceleration Method: Controller Cache
If i just remove all the thinpool entries (if i find them) do you think
that might do the trick?
thanks,
Adrian
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QGJ3JNK7CF2...
Hi Adrian,
I don't understand yoiur layout.
Can you clarify the following:
/dev/sdd was a PV
/dev/sdd was not the only PV in the VG
A thin LV was created from the VG
The Thin LV was used as a gluster brick.
I don't get why you want the new disk to become /dev/sdd again, as it won't have
the necesary LVM metadata.
Gluster works with miunt points . You can mount whatever you wish at /gluster_bricks/data2
and it will try to use that. As the brick doesn't exist any more - you will have to
use 'reset-brick' or 'replace-brick' commands.
Best Regards,
Strahil Nikolov
12:31 p.m.
New subject: Damaged hard disk in volume replica gluster
Strahil,
Let me take a step back and provide a bit more context of what we need to achieve.
We have a 3 node HCI setup, and host1 has a failed drive (/dev/sdd) that is used entirely
for 1 brick ( /gluster_bricks/data2/data2), this is a Replica 3 brick setup.
The issue we have is that we don't have any more drive bays in our enclosure cages to
add an extra disk and use it to replace the bad drive/Brick (/dev/sdd).
What would be the best way to replace the drive/brick in this situation? and what is the
order in which the steps need to be completed?
I think I know how to replace a bad brick with a different brick and get things up and
running, but in this case as mentioned above I have not more drive bays to allocate a new
drive.
1:48 p.m.
New subject: Damaged hard disk in volume replica gluster
On February 19, 2020 10:31:04 PM GMT+02:00, adrianquintero(a)gmail.com wrote:
Strahil,
Let me take a step back and provide a bit more context of what we need
to achieve.
We have a 3 node HCI setup, and host1 has a failed drive (/dev/sdd)
that is used entirely for 1 brick ( /gluster_bricks/data2/data2), this
is a Replica 3 brick setup.
The issue we have is that we don't have any more drive bays in our
enclosure cages to add an extra disk and use it to replace the bad
drive/Brick (/dev/sdd).
What would be the best way to replace the drive/brick in this
situation? and what is the order in which the steps need to be
completed?
I think I know how to replace a bad brick with a different brick and
get things up and running, but in this case as mentioned above I have
not more drive bays to allocate a new drive.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HQPQKTP5LUO...
Hm...
What about LVM setup.
I will assume some stuff, but this doesn't mean that it is right.
Asumptions:
/dev/sdd is the only PV in the VG
You have thin pool ontop /dev/sdd
When /dev/sdd is missing -> the VG disappeared
You have excluded /dev/sdd from multipath.
So, you need to:
1. Remove broken disk (anyway it's useless)
2. Push the new one
3. If you have a raid controller - create a logical lun with only the new disk
4. The new disk will be somwthing like /dev/sdz
5. Create new PV, VG , LV
vgcreate OLD_VG /dev/sdz
Note: If you use filters - pick the proper disk name
lvcreate -l 100%FREE -T OLD_VG/OLD_THINPOOL
lvcreate -V <old_size>G -T OLD_VG/OLD_THINPOOL -n OLD_THIN_VOL_NAME
6. Create a filesystem
mkfs.xfs /dev/OLD_VG/OLD_THIN_VOL_NAME
Note: you might get errors on all LVM commands complaining about /dev/sdd.To get rid of
that , you have to delete that disk:
echo 1 > /sys/block/sdd/device/delete
7. Update /etc/fstab or systemd unit if the old FS was not XFS
8. Mount the brick:
mount /gluster_bricks/data2
mkdir /gluster_bricks/data2/data2
restorecon -RFvv /gluster_bricks/data2
9. Reset the brick
A) You can do it from oVirt UI -> Storage -> Volumes -> Bricks -> Reset Brick
(up left)
B) gluster volume reset-brick data2 node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
C) gluster volume replace-brick data2 node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
Note: I had a bad experience with 'reset-brick' in gluster v3 , so I prefer to
use replace-brick
Note2: What's the difference between B & C -> replace brick allows the
desitination to be another server and/or another directory. Reset-brick doesn't allow
that.
Once the brick is up - we should be ready to go.
Best Regards,
Strahil Nikolov
3:19 p.m.
New subject: Damaged hard disk in volume replica gluster
This is just my opinion but I would be to attach external storage and dd the drive using
the command to ignore errors. Then replace the drive(s) and dd back to the replacement
drive.
I don't know if gluster has snapshot or backup of this drive that would rebuild it for
you.
This is just my opinion.
Eric Evans
Digital Data Services LLC.
304.660.9080
-----Original Message-----
From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Sent: Wednesday, February 19, 2020 4:48 PM
To: users(a)ovirt.org; adrianquintero(a)gmail.com
Subject: [ovirt-users] Re: Damaged hard disk in volume replica gluster
On February 19, 2020 10:31:04 PM GMT+02:00, adrianquintero(a)gmail.com wrote:
Strahil,
Let me take a step back and provide a bit more context of what we need
to achieve.
We have a 3 node HCI setup, and host1 has a failed drive (/dev/sdd)
that is used entirely for 1 brick ( /gluster_bricks/data2/data2), this
is a Replica 3 brick setup.
The issue we have is that we don't have any more drive bays in our
enclosure cages to add an extra disk and use it to replace the bad
drive/Brick (/dev/sdd).
What would be the best way to replace the drive/brick in this
situation? and what is the order in which the steps need to be
completed?
I think I know how to replace a bad brick with a different brick and
get things up and running, but in this case as mentioned above I have
not more drive bays to allocate a new drive.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy
Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HQPQKTP5L
UOEUQITPIIIS6TBDRYJ5T5O/
Hm...
What about LVM setup.
I will assume some stuff, but this doesn't mean that it is right.
Asumptions:
/dev/sdd is the only PV in the VG
You have thin pool ontop /dev/sdd
When /dev/sdd is missing -> the VG disappeared You have excluded /dev/sdd from
multipath.
So, you need to:
1. Remove broken disk (anyway it's useless) 2. Push the new one 3. If you have a raid
controller - create a logical lun with only the new disk 4. The new disk will be
somwthing like /dev/sdz 5. Create new PV, VG , LV vgcreate OLD_VG /dev/sdz
Note: If you use filters - pick the proper disk name lvcreate -l 100%FREE -T
OLD_VG/OLD_THINPOOL lvcreate -V <old_size>G -T OLD_VG/OLD_THINPOOL -n
OLD_THIN_VOL_NAME 6. Create a filesystem mkfs.xfs /dev/OLD_VG/OLD_THIN_VOL_NAME
Note: you might get errors on all LVM commands complaining about /dev/sdd.To get rid of
that , you have to delete that disk:
echo 1 > /sys/block/sdd/device/delete
7. Update /etc/fstab or systemd unit if the old FS was not XFS 8. Mount the brick:
mount /gluster_bricks/data2
mkdir /gluster_bricks/data2/data2
restorecon -RFvv /gluster_bricks/data2
9. Reset the brick
A) You can do it from oVirt UI -> Storage -> Volumes -> Bricks -> Reset Brick
(up left)
B) gluster volume reset-brick data2 node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
C) gluster volume replace-brick data2 node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
Note: I had a bad experience with 'reset-brick' in gluster v3 , so I prefer to
use replace-brick
Note2: What's the difference between B & C -> replace brick allows the
desitination to be another server and/or another directory. Reset-brick doesn't allow
that.
Once the brick is up - we should be ready to go.
Best Regards,
Strahil Nikolov
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DMJPC7UHYXA...
8:39 p.m.
New subject: Damaged hard disk in volume replica gluster
On February 20, 2020 1:19:41 AM GMT+02:00, eevans(a)digitaldatatechs.com wrote:
This is just my opinion but I would be to attach external storage and
dd the drive using the command to ignore errors. Then replace the
drive(s) and dd back to the replacement drive.
I don't know if gluster has snapshot or backup of this drive that would
rebuild it for you.
This is just my opinion.
Eric Evans
Digital Data Services LLC.
304.660.9080
-----Original Message-----
From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Sent: Wednesday, February 19, 2020 4:48 PM
To: users(a)ovirt.org; adrianquintero(a)gmail.com
Subject: [ovirt-users] Re: Damaged hard disk in volume replica gluster
On February 19, 2020 10:31:04 PM GMT+02:00, adrianquintero(a)gmail.com
wrote:
>Strahil,
>Let me take a step back and provide a bit more context of what we need
>to achieve.
>
>We have a 3 node HCI setup, and host1 has a failed drive (/dev/sdd)
>that is used entirely for 1 brick ( /gluster_bricks/data2/data2), this
>is a Replica 3 brick setup.
>
>The issue we have is that we don't have any more drive bays in our
>enclosure cages to add an extra disk and use it to replace the bad
>drive/Brick (/dev/sdd).
>
>What would be the best way to replace the drive/brick in this
>situation? and what is the order in which the steps need to be
>completed?
>
>I think I know how to replace a bad brick with a different brick and
>get things up and running, but in this case as mentioned above I have
>not more drive bays to allocate a new drive.
>_______________________________________________
>Users mailing list -- users(a)ovirt.org
>To unsubscribe send an email to users-leave(a)ovirt.org Privacy
>Statement: https://www.ovirt.org/site/privacy-policy/
>oVirt Code of Conduct:
>https://www.ovirt.org/community/about/community-guidelines/
>List Archives:
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/HQPQKTP5L
>UOEUQITPIIIS6TBDRYJ5T5O/
Hm...
What about LVM setup.
I will assume some stuff, but this doesn't mean that it is right.
Asumptions:
/dev/sdd is the only PV in the VG
You have thin pool ontop /dev/sdd
When /dev/sdd is missing -> the VG disappeared You have excluded
/dev/sdd from multipath.
So, you need to:
1. Remove broken disk (anyway it's useless) 2. Push the new one 3. If
you have a raid controller - create a logical lun with only the new
disk 4. The new disk will be somwthing like /dev/sdz 5. Create new PV,
VG , LV vgcreate OLD_VG /dev/sdz
Note: If you use filters - pick the proper disk name lvcreate -l
100%FREE -T OLD_VG/OLD_THINPOOL lvcreate -V <old_size>G -T
OLD_VG/OLD_THINPOOL -n OLD_THIN_VOL_NAME 6. Create a filesystem
mkfs.xfs /dev/OLD_VG/OLD_THIN_VOL_NAME
Note: you might get errors on all LVM commands complaining about
/dev/sdd.To get rid of that , you have to delete that disk:
echo 1 > /sys/block/sdd/device/delete
7. Update /etc/fstab or systemd unit if the old FS was not XFS 8.
Mount the brick:
mount /gluster_bricks/data2
mkdir /gluster_bricks/data2/data2
restorecon -RFvv /gluster_bricks/data2
9. Reset the brick
A) You can do it from oVirt UI -> Storage -> Volumes -> Bricks -> Reset
Brick (up left)
B) gluster volume reset-brick data2
node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
C) gluster volume replace-brick data2
node_name:/gluster_bricks/data2/data2
node_name:/gluster_bricks/data2/data2 commit force
Note: I had a bad experience with 'reset-brick' in gluster v3 , so I
prefer to use replace-brick
Note2: What's the difference between B & C -> replace brick allows the
desitination to be another server and/or another directory.
Reset-brick doesn't allow that.
Once the brick is up - we should be ready to go.
Best Regards,
Strahil Nikolov
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy
Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DMJPC7UHYXA...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KL3HA2PQJVG...
Hi Eric,
As this is replica volume , you already have the data at 2 other locations. You don't
need the broken's disk data - you can access the other bricks and backup from there.
Gluster is not interested of anything but the mount point. You can set a new brick on the
same or different path and -> replace-brick option will take care.
Beet Regards,
Strahil Nikolov
7:14 a.m.
New subject: Damaged hard disk in volume replica gluster
Strahil,
Something that just came to my attention is that we have a second cluster with VDO
enabled, is there something out there that can explain the process to accomplish a disk
replacement with VDO?
Thanks,
Adrian
9:35 a.m.
New subject: Damaged hard disk in volume replica gluster
On February 25, 2020 5:14:24 PM GMT+02:00, adrianquintero(a)gmail.com wrote:
Strahil,
Something that just came to my attention is that we have a second
cluster with VDO enabled, is there something out there that can explain
the process to accomplish a disk replacement with VDO?
Thanks,
Adrian
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D4VLQ673HYL...
Hi Adrian,
I'm also using VDO and thus my bricks are mounted via a '.mount' unit.
From Gluster perspective - it just requires a directory with enough space.
If the brick name is the same (same host) you have 2 options 'reset-brick' &
'replace-brick'.
So in your case you need:
1. VDO starts first
2. LVM scans the VDO and activates the VG using the VDO as PV
3. Systemd '.mount' unit mounts the brick
Note: Define in the mount unit requirements for the VDO service (or if you have a custom
VDO service for this VDO device only)
4. You replace the brick in order to restore the volume
Best Regards,
Strahil Nikolov
10:18 a.m.
New subject: Damaged hard disk in volume replica gluster
Strahil,
In our case the VDO was created during oVirt HCI setup. So I am trying to determine how it
gets mounted
As far as I can tell this is the config is as follows:
[root@host1 ~]# vdo printConfigFile
config: !Configuration
vdos:
vdo_sdc: !VDOService
_operationState: finished
ackThreads: 1
activated: enabled
bioRotationInterval: 64
bioThreads: 4
blockMapCacheSize: 128M
blockMapPeriod: 16380
compression: enabled
cpuThreads: 2
deduplication: enabled
device: /dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44
hashZoneThreads: 1
indexCfreq: 0
indexMemory: 0.25
indexSparse: disabled
indexThreads: 0
logicalBlockSize: 512
logicalSize: 7200G
logicalThreads: 1
name: vdo_sdc
physicalSize: 781379416K
physicalThreads: 1
readCache: enabled
readCacheSize: 20M
slabSize: 32G
writePolicy: auto
version: 538380551
filename: /etc/vdoconf.yml
[root@host1 ~]# lsblk /dev/sdc
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdc 8:32 0 745.2G 0 disk
├─3600508b1001cd70935270813aca97c44 253:6 0 745.2G 0 mpath
└─vdo_sdc 253:21 0 7T 0 vdo
└─gluster_vg_sdc-gluster_lv_data 253:22 0 7T 0 lvm /gluster_bricks/data
I know that vdo_sdc is the TYPE="LVM2_member", this from /etc/fstab entries:
/dev/mapper/vdo_sdc: UUID="gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR"
TYPE="LVM2_member"
/dev/mapper/gluster_vg_sdc-gluster_lv_data:
UUID="8a94b876-baf2-442c-9e7f-6573308c8ef3" TYPE="xfs"
--- Physical volumes ---
PV Name /dev/mapper/vdo_sdc
PV UUID gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR
PV Status allocatable
Total PE / Free PE 1843199 / 0
Am am trying to piece things together, I am doing more research on VDO in an HCI oVirt
setup.
In the meantime any help is welcome.
Thanks again,
Adrian
10:35 a.m.
New subject: Damaged hard disk in volume replica gluster
On February 25, 2020 8:18:20 PM GMT+02:00, adrianquintero(a)gmail.com wrote:
Strahil,
In our case the VDO was created during oVirt HCI setup. So I am trying
to determine how it gets mounted
As far as I can tell this is the config is as follows:
[root@host1 ~]# vdo printConfigFile
config: !Configuration
vdos:
vdo_sdc: !VDOService
_operationState: finished
ackThreads: 1
activated: enabled
bioRotationInterval: 64
bioThreads: 4
blockMapCacheSize: 128M
blockMapPeriod: 16380
compression: enabled
cpuThreads: 2
deduplication: enabled
device: /dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44
hashZoneThreads: 1
indexCfreq: 0
indexMemory: 0.25
indexSparse: disabled
indexThreads: 0
logicalBlockSize: 512
logicalSize: 7200G
logicalThreads: 1
name: vdo_sdc
physicalSize: 781379416K
physicalThreads: 1
readCache: enabled
readCacheSize: 20M
slabSize: 32G
writePolicy: auto
version: 538380551
filename: /etc/vdoconf.yml
[root@host1 ~]# lsblk /dev/sdc
NAME MAJ:MIN RM SIZE RO TYPE
MOUNTPOINT
sdc 8:32 0 745.2G 0 disk
├─3600508b1001cd70935270813aca97c44 253:6 0 745.2G 0 mpath
└─vdo_sdc 253:21 0 7T 0 vdo
└─gluster_vg_sdc-gluster_lv_data 253:22 0 7T 0 lvm
/gluster_bricks/data
I know that vdo_sdc is the TYPE="LVM2_member", this from /etc/fstab
entries:
/dev/mapper/vdo_sdc: UUID="gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR"
TYPE="LVM2_member"
/dev/mapper/gluster_vg_sdc-gluster_lv_data:
UUID="8a94b876-baf2-442c-9e7f-6573308c8ef3" TYPE="xfs"
--- Physical volumes ---
PV Name /dev/mapper/vdo_sdc
PV UUID gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR
PV Status allocatable
Total PE / Free PE 1843199 / 0
Am am trying to piece things together, I am doing more research on VDO
in an HCI oVirt setup.
In the meantime any help is welcome.
Thanks again,
Adrian
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HVCYYZSUJ7R...
Hi Adrian,
It seems that /dev/sdc (persistent name
/dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44) is a PV in Volume Group
'gluster_vg_sdc' and the LV 'gluster_lv_data' is mounted as your brick .
So you have:
Gluster Brick
gluster_lv_data -> LV
gluster_vg_sdc -> VG
gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR -> PV's UUID
/dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44 -> multipath with 1
leg
/dev/sdc -> block device
Note: You should avoid using multipath for local drvices.
In order to do that , you can put the following in your /etc/multipath.conf to prevent
vdsm from modifying it:
# VDSM PRIVATE
And you should blacklist the wwid:
blacklist {
wwid 3600508b1001cd70935270813aca97c44
}
To verify the multipath.conf run:
multipath -v3 and check for any errors .
Once you modify /etc/multupath.conf and you verified it with 'multipath -v3' ,
you should update the initramfs:
'dracut -f'
Best Regards,
Strahil Nikolov
10:37 a.m.
New subject: Damaged hard disk in volume replica gluster
On February 25, 2020 8:35:27 PM GMT+02:00, Strahil Nikolov <hunter86_bg(a)yahoo.com>
wrote:
On February 25, 2020 8:18:20 PM GMT+02:00, adrianquintero(a)gmail.com
wrote:
>Strahil,
>In our case the VDO was created during oVirt HCI setup. So I am trying
>to determine how it gets mounted
>
>As far as I can tell this is the config is as follows:
>
>
>[root@host1 ~]# vdo printConfigFile
>config: !Configuration
> vdos:
> vdo_sdc: !VDOService
> _operationState: finished
> ackThreads: 1
> activated: enabled
> bioRotationInterval: 64
> bioThreads: 4
> blockMapCacheSize: 128M
> blockMapPeriod: 16380
> compression: enabled
> cpuThreads: 2
> deduplication: enabled
> device: /dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44
> hashZoneThreads: 1
> indexCfreq: 0
> indexMemory: 0.25
> indexSparse: disabled
> indexThreads: 0
> logicalBlockSize: 512
> logicalSize: 7200G
> logicalThreads: 1
> name: vdo_sdc
> physicalSize: 781379416K
> physicalThreads: 1
> readCache: enabled
> readCacheSize: 20M
> slabSize: 32G
> writePolicy: auto
> version: 538380551
>filename: /etc/vdoconf.yml
>
>
>
>[root@host1 ~]# lsblk /dev/sdc
>NAME MAJ:MIN RM SIZE RO TYPE
>MOUNTPOINT
>sdc 8:32 0 745.2G 0 disk
>├─3600508b1001cd70935270813aca97c44 253:6 0 745.2G 0 mpath
>└─vdo_sdc 253:21 0 7T 0 vdo
>└─gluster_vg_sdc-gluster_lv_data 253:22 0 7T 0 lvm
>/gluster_bricks/data
>
>I know that vdo_sdc is the TYPE="LVM2_member", this from /etc/fstab
>entries:
>/dev/mapper/vdo_sdc: UUID="gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR"
>TYPE="LVM2_member"
>/dev/mapper/gluster_vg_sdc-gluster_lv_data:
>UUID="8a94b876-baf2-442c-9e7f-6573308c8ef3" TYPE="xfs"
>
> --- Physical volumes ---
> PV Name /dev/mapper/vdo_sdc
> PV UUID gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR
> PV Status allocatable
> Total PE / Free PE 1843199 / 0
>
>
>
>
>Am am trying to piece things together, I am doing more research on
VDO
>in an HCI oVirt setup.
>
>In the meantime any help is welcome.
>
>Thanks again,
>
>Adrian
>
>_______________________________________________
>Users mailing list -- users(a)ovirt.org
>To unsubscribe send an email to users-leave(a)ovirt.org
>Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>oVirt Code of Conduct:
>https://www.ovirt.org/community/about/community-guidelines/
>List Archives:
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/HVCYYZSUJ7RCRMKZLMUCTU537VFYCD76/
Hi Adrian,
It seems that /dev/sdc (persistent name
/dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44) is a PV in
Volume Group 'gluster_vg_sdc' and the LV 'gluster_lv_data' is mounted
as your brick .
So you have:
Gluster Brick
gluster_lv_data -> LV
gluster_vg_sdc -> VG
gsaPfw-agoW-HZ3o-ly0W-wjb3-YqvL-266SnR -> PV's UUID
/dev/disk/by-id/scsi-3600508b1001cd70935270813aca97c44 -> multipath
with 1 leg
/dev/sdc -> block device
Note: You should avoid using multipath for local drvices.
In order to do that , you can put the following in your
/etc/multipath.conf to prevent vdsm from modifying it:
# VDSM PRIVATE
And you should blacklist the wwid:
blacklist {
wwid 3600508b1001cd70935270813aca97c44
}
To verify the multipath.conf run:
multipath -v3 and check for any errors .
Once you modify /etc/multupath.conf and you verified it with
'multipath -v3' , you should update the initramfs:
'dracut -f'
Best Regards,
Strahil Nikolov
Hm...
I forgot to describe the VDO - it is above the mpath and below the PV layer.
Best Regards,
Strahil Nikolov
1:01 p.m.
New subject: Damaged hard disk in volume replica gluster
Thanks Strahil,
I made a mistake in this 3 node cluster, I use this cluster for testing, in our Prod
environment we do have the blacklist but it is as follows:
# VDSM REVISION 1.8
# VDSM PRIVATE
blacklist {
devnode "*"
}
However we did not add each individual local disk to the blacklist entries, would this
still be the case where I would have to add the individual blacklist entries as you
suggested? I thought 'devnode "*" ' achieved this...
From another post you mentioned something similart to:
# VDSM PRIVATE
blacklist {
devnode "*"
wwid Crucial_CT256MX100SSD1_14390D52DCF5
wwid WDC_WD5000AZRX-00A8LB0_WD-WCC1U0056126
wwid WDC_WD5003ABYX-01WERA0_WD-WMAYP2335378
wwid nvme.1cc1-324a31313230303131353936-414441544120535838323030504e50-00000001
}
My production host:
[root@host18 ~]# multipath -v2 -d
[root@host18 ~]#
Thoughts?
Thanks,
Adrian
2 p.m.
New subject: Damaged hard disk in volume replica gluster
On February 25, 2020 11:01:47 PM GMT+02:00, adrianquintero(a)gmail.com wrote:
Thanks Strahil,
I made a mistake in this 3 node cluster, I use this cluster for
testing, in our Prod environment we do have the blacklist but it is as
follows:
# VDSM REVISION 1.8
# VDSM PRIVATE
blacklist {
devnode "*"
}
However we did not add each individual local disk to the blacklist
entries, would this still be the case where I would have to add the
individual blacklist entries as you suggested? I thought 'devnode "*" '
achieved this...
From another post you mentioned something similart to:
# VDSM PRIVATE
blacklist {
devnode "*"
wwid Crucial_CT256MX100SSD1_14390D52DCF5
wwid WDC_WD5000AZRX-00A8LB0_WD-WCC1U0056126
wwid WDC_WD5003ABYX-01WERA0_WD-WMAYP2335378
wwid
nvme.1cc1-324a31313230303131353936-414441544120535838323030504e50-00000001
}
My production host:
[root@host18 ~]# multipath -v2 -d
[root@host18 ~]#
Thoughts?
Thanks,
Adrian
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UJPRAUG5VBZ...
'devnode *' will blacklist all /dev/XYZ devices, which is only acceptable if you
do not plan to use SAN or iSCSI .
Otherwise, you should just blacklist local devices and the rest will be under mpath.
Best Regards,
Strahil Nikolov
2:06 p.m.
New subject: Damaged hard disk in volume replica gluster
We are not planning on using SAN/iSCSI at all.
I will try out your suggested steps for VDO and see if I can create a procedure for our
current scenario.
thanks I will let you know the outcome.
regards,
Adrian
1522
days inactive
1658
days old
20 comments
5 participants
participants (5)
-
adrianquintero＠gmail.com -
eevans＠digitaldatatechs.com -
matteo fedeli -
Strahil -
Strahil Nikolov