ovirt-engine-appliance ova
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm? I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6. Thanks, Jingjie
If I'm not wrong, this rpm is being downloaded to one of the hosts during self-hosted engine's deployment.Why would you try to import a second self-hosted engine ? Best Regards,Strahil Nikolov В четвъртък, 11 юли 2019 г., 22:37:56 ч. Гринуич+3, <jingjie.jiang@oracle.com> написа: Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm? I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6. Thanks, Jingjie _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3...
Hi Strahil, Yes, you are right. After install ovirt-engine-appliance rpm, the ova file will be save at /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190610.1.el7.ova I was trying to understand what the ova file included. I thought it only has the CentOS7.6. I observed that ovirt-engine was installed during "host-engine --deploy" Is ovirt-engine-appliance-4.3-20190610.1.el7.ova only used for deploy host-engine? Is there a document about how to generate? Thanks, Jingjie On 7/11/19 4:20 PM, Strahil Nikolov wrote:
If I'm not wrong, this rpm is being downloaded to one of the hosts during self-hosted engine's deployment. Why would you try to import a second self-hosted engine ?
Best Regards, Strahil Nikolov
В четвъртък, 11 юли 2019 г., 22:37:56 ч. Гринуич+3, <jingjie.jiang@oracle.com> написа:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm? I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.
Thanks, Jingjie _______________________________________________ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org <mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3...
On Thu, Jul 11, 2019 at 10:46 PM <jingjie.jiang@oracle.com> wrote:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
You might want to check the project's source code: https://github.com/ovirt/ovirt-appliance/ Or study the logs of a CI build of it: https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86... I never tried building it myself locally, though.
I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova
No idea why this failed.
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.
It has CentOS + oVirt engine. The only major use for it is by hosted-engine --deploy. In theory you can try importing it elsewhere, but I do not recall reports about people that tried this and whether it works. Best regards, -- Didi
Hi David, Thanks for your info. Please check my reply inline. -Jingjie On 7/16/19 3:55 AM, Yedidyah Bar David wrote:
On Thu, Jul 11, 2019 at 10:46 PM <jingjie.jiang@oracle.com> wrote:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm? You might want to check the project's source code:
https://github.com/ovirt/ovirt-appliance/
Or study the logs of a CI build of it:
https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86...
I never tried building it myself locally, though.
I tried to build after checked out the source code from https://github.com/ovirt/ovirt-appliance/, but the build failed. /# make// //livemedia-creator --make-disk --ram=2048 --vcpus=4 --iso=boot.iso --ks=ovirt-engine-appliance.ks --qcow2 --image-name=ovirt-engine-appliance.qcow2// //2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1// //2019-07-22 12:34:00,154: disk_size = 51GiB// //2019-07-22 12:34:00,154: disk_img = /var/tmp/ovirt-engine-appliance.qcow2// //2019-07-22 12:34:00,154: install_log = /root/ovirt/ovirt-appliance/engine-appliance/virt-install.log// //mount: /dev/loop0 is write-protected, mounting read-only// //Formatting '/var/tmp/ovirt-engine-appliance.qcow2', fmt=qcow2 size=54760833024 encryption=off cluster_size=65536 lazy_refcounts=off // //2019-07-22 12:34:10,195: Running virt-install.// // //Starting install...// //Retrieving file vmlinuz... | 6.3 MB 00:00 // //Retrieving file initrd.img... | 50 MB 00:00 // //Domain installation still in progress. You can reconnect to // //the console to complete the installation process.// //......// //2019-07-22 12:35:15,281: Installation error detected. See logfile.// //2019-07-22 12:35:15,283: Shutting down LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55// //Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed// // //Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been undefined// // //2019-07-22 12:35:15,599: unmounting the iso// //2019-07-22 12:35:20,612: Install failed: virt_install failed// //2019-07-22 12:35:20,613: Removing bad disk image// //2019-07-22 12:35:20,613: virt_install failed// //make: *** [ovirt-engine-appliance.qcow2] Error 1/ In the log I found the error as following from virt-install.log: /16:35:07,472 ERR anaconda:CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection// //16:35:07,472 DEBUG anaconda:running handleException// //16:35:07,473 CRIT anaconda:Traceback (most recent call last):#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py", line 352, in _mainloop#012 prompt = last_screen.prompt(self._screens[-1][1])#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py", line 107, in prompt#012 raise CmdlineError(errtxt)#012#012CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection// //16:35:08,020 DEBUG anaconda:Gtk cannot be initialized// //16:35:08,020 DEBUG anaconda:In the main thread, running exception handler// //16:35:08,386 NOTICE multipathd:zram0: add path (uevent)// //16:35:08,386 NOTICE multipathd:zram0: spurious uevent, path already in pathvec// //16:35:08,386 NOTICE multipathd:zram0: HDIO_GETGEO failed with 25// //16:35:08,386 ERR multipathd:zram0: failed to get path uid// //16:35:08,388 ERR multipathd:uevent trigger error/ Can you help me to fix the issue?
I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova No idea why this failed.
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6. It has CentOS + oVirt engine.
The only major use for it is by hosted-engine --deploy. In theory you can try importing it elsewhere, but I do not recall reports about people that tried this and whether it works.
Best regards,
On Mon, Jul 22, 2019 at 11:53 PM Jingjie Jiang <jingjie.jiang@oracle.com> wrote:
Hi David,
(Actually it's "Yedidyah" or "Didi")
Thanks for your info.
Please check my reply inline.
-Jingjie On 7/16/19 3:55 AM, Yedidyah Bar David wrote:
On Thu, Jul 11, 2019 at 10:46 PM <jingjie.jiang@oracle.com> <jingjie.jiang@oracle.com> wrote:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
You might want to check the project's source code: https://github.com/ovirt/ovirt-appliance/
Or study the logs of a CI build of it: https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86...
I never tried building it myself locally, though.
I tried to build after checked out the source code from https://github.com/ovirt/ovirt-appliance/,
but the build failed.
*# make* *livemedia-creator --make-disk --ram=2048 --vcpus=4 --iso=boot.iso --ks=ovirt-engine-appliance.ks --qcow2 --image-name=ovirt-engine-appliance.qcow2* *2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1* *2019-07-22 12:34:00,154: disk_size = 51GiB* *2019-07-22 12:34:00,154: disk_img = /var/tmp/ovirt-engine-appliance.qcow2* *2019-07-22 12:34:00,154: install_log = /root/ovirt/ovirt-appliance/engine-appliance/virt-install.log* *mount: /dev/loop0 is write-protected, mounting read-only* *Formatting '/var/tmp/ovirt-engine-appliance.qcow2', fmt=qcow2 size=54760833024 encryption=off cluster_size=65536 lazy_refcounts=off * *2019-07-22 12:34:10,195: Running virt-install.*
*Starting install...* *Retrieving file vmlinuz... | 6.3 MB 00:00 * *Retrieving file initrd.img... | 50 MB 00:00 * *Domain installation still in progress. You can reconnect to * *the console to complete the installation process.* *......* *2019-07-22 12:35:15,281: Installation error detected. See logfile.* *2019-07-22 12:35:15,283: Shutting down LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55* *Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed*
*Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been undefined*
*2019-07-22 12:35:15,599: unmounting the iso* *2019-07-22 12:35:20,612: Install failed: virt_install failed* *2019-07-22 12:35:20,613: Removing bad disk image* *2019-07-22 12:35:20,613: virt_install failed* *make: *** [ovirt-engine-appliance.qcow2] Error 1*
In the log I found the error as following from virt-install.log:
*16:35:07,472 ERR anaconda:CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection* *16:35:07,472 DEBUG anaconda:running handleException* *16:35:07,473 CRIT anaconda:Traceback (most recent call last):#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py", line 352, in _mainloop#012 prompt = last_screen.prompt(self._screens[-1][1])#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py", line 107, in prompt#012 raise CmdlineError(errtxt)#012#012CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection* *16:35:08,020 DEBUG anaconda:Gtk cannot be initialized* *16:35:08,020 DEBUG anaconda:In the main thread, running exception handler* *16:35:08,386 NOTICE multipathd:zram0: add path (uevent)* *16:35:08,386 NOTICE multipathd:zram0: spurious uevent, path already in pathvec* *16:35:08,386 NOTICE multipathd:zram0: HDIO_GETGEO failed with 25* *16:35:08,386 ERR multipathd:zram0: failed to get path uid* *16:35:08,388 ERR multipathd:uevent trigger error*
Can you help me to fix the issue?
Sorry, I never tried to build it myself, nor have experience with livemedia-creator. As I wrote above, I suggest to compare your output/result with that of oVirt CI. Otherwise, I'd probably start debugging by searching the net for the error messages you received. Good luck and best regards,
I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova
No idea why this failed.
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.
It has CentOS + oVirt engine.
The only major use for it is by hosted-engine --deploy. In theory you can try importing it elsewhere, but I do not recall reports about people that tried this and whether it works.
Best regards,
-- Didi
What system are you running `make` on ? There's some logic before that iirc (like which repos to install from etc). Basically, ovirt-appliance/automation/build-artifacts.sh is the place to go. On Tuesday, July 23, 2019, Yedidyah Bar David <didi@redhat.com> wrote:
On Mon, Jul 22, 2019 at 11:53 PM Jingjie Jiang <jingjie.jiang@oracle.com> wrote:
Hi David,
(Actually it's "Yedidyah" or "Didi")
Thanks for your info.
Please check my reply inline.
-Jingjie On 7/16/19 3:55 AM, Yedidyah Bar David wrote:
On Thu, Jul 11, 2019 at 10:46 PM <jingjie.jiang@oracle.com> <jingjie.jiang@oracle.com> wrote:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
You might want to check the project's source code: https://github.com/ovirt/ovirt-appliance/
Or study the logs of a CI build of it: https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86...
I never tried building it myself locally, though.
I tried to build after checked out the source code from https://github.com/ovirt/ovirt-appliance/,
but the build failed.
*# make* *livemedia-creator --make-disk --ram=2048 --vcpus=4 --iso=boot.iso --ks=ovirt-engine-appliance.ks --qcow2 --image-name=ovirt-engine-appliance.qcow2* *2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1* *2019-07-22 12:34:00,154: disk_size = 51GiB* *2019-07-22 12:34:00,154: disk_img = /var/tmp/ovirt-engine-appliance.qcow2* *2019-07-22 12:34:00,154: install_log = /root/ovirt/ovirt-appliance/engine-appliance/virt-install.log* *mount: /dev/loop0 is write-protected, mounting read-only* *Formatting '/var/tmp/ovirt-engine-appliance.qcow2', fmt=qcow2 size=54760833024 encryption=off cluster_size=65536 lazy_refcounts=off * *2019-07-22 12:34:10,195: Running virt-install.*
*Starting install...* *Retrieving file vmlinuz... | 6.3 MB 00:00 * *Retrieving file initrd.img... | 50 MB 00:00 * *Domain installation still in progress. You can reconnect to * *the console to complete the installation process.* *......* *2019-07-22 12:35:15,281: Installation error detected. See logfile.* *2019-07-22 12:35:15,283: Shutting down LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55* *Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed*
*Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been undefined*
*2019-07-22 12:35:15,599: unmounting the iso* *2019-07-22 12:35:20,612: Install failed: virt_install failed* *2019-07-22 12:35:20,613: Removing bad disk image* *2019-07-22 12:35:20,613: virt_install failed* *make: *** [ovirt-engine-appliance.qcow2] Error 1*
In the log I found the error as following from virt-install.log:
*16:35:07,472 ERR anaconda:CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection* *16:35:07,472 DEBUG anaconda:running handleException* *16:35:07,473 CRIT anaconda:Traceback (most recent call last):#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py", line 352, in _mainloop#012 prompt = last_screen.prompt(self._screens[-1][1])#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py", line 107, in prompt#012 raise CmdlineError(errtxt)#012#012CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection* *16:35:08,020 DEBUG anaconda:Gtk cannot be initialized* *16:35:08,020 DEBUG anaconda:In the main thread, running exception handler* *16:35:08,386 NOTICE multipathd:zram0: add path (uevent)* *16:35:08,386 NOTICE multipathd:zram0: spurious uevent, path already in pathvec* *16:35:08,386 NOTICE multipathd:zram0: HDIO_GETGEO failed with 25* *16:35:08,386 ERR multipathd:zram0: failed to get path uid* *16:35:08,388 ERR multipathd:uevent trigger error*
Can you help me to fix the issue?
Sorry, I never tried to build it myself, nor have experience with livemedia-creator. As I wrote above, I suggest to compare your output/result with that of oVirt CI. Otherwise, I'd probably start debugging by searching the net for the error messages you received.
Good luck and best regards,
I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova
No idea why this failed.
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.
It has CentOS + oVirt engine.
The only major use for it is by hosted-engine --deploy. In theory you can try importing it elsewhere, but I do not recall reports about people that tried this and whether it works.
Best regards,
-- Didi
Hi Didi, Thanks for your reply. I was running "make" from CentOS 7 on x86_64 hardware. # head /etc/os-release NAME="CentOS Linux" VERSION="7 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="7" PRETTY_NAME="CentOS Linux 7 (Core)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:7" HOME_URL="https://www.centos.org/" BUG_REPORT_URL="https://bugs.centos.org/" -Jingjie On 7/24/19 2:11 PM, Yuval Turgeman wrote:
What system are you running `make` on ? There's some logic before that iirc (like which repos to install from etc). Basically, ovirt-appliance/automation/build-artifacts.sh is the place to go.
On Tuesday, July 23, 2019, Yedidyah Bar David <didi@redhat.com <mailto:didi@redhat.com>> wrote:
On Mon, Jul 22, 2019 at 11:53 PM Jingjie Jiang <jingjie.jiang@oracle.com <mailto:jingjie.jiang@oracle.com>> wrote:
Hi David,
(Actually it's "Yedidyah" or "Didi")
Thanks for your info.
Please check my reply inline.
-Jingjie
On 7/16/19 3:55 AM, Yedidyah Bar David wrote:
On Thu, Jul 11, 2019 at 10:46 PM<jingjie.jiang@oracle.com> <mailto:jingjie.jiang@oracle.com> wrote:
Hi, Can someone tell me how to generate ovirt-engine-appliance ova file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
You might want to check the project's source code:
https://github.com/ovirt/ovirt-appliance/ <https://github.com/ovirt/ovirt-appliance/>
Or study the logs of a CI build of it:
https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86... <https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/>
I never tried building it myself locally, though.
I tried to build after checked out the source code from https://github.com/ovirt/ovirt-appliance/ <https://github.com/ovirt/ovirt-appliance/>,
but the build failed.
/# make// //livemedia-creator --make-disk --ram=2048 --vcpus=4 --iso=boot.iso --ks=ovirt-engine-appliance.ks --qcow2 --image-name=ovirt-engine-appliance.qcow2// //2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1// //2019-07-22 12:34:00,154: disk_size = 51GiB// //2019-07-22 12:34:00,154: disk_img = /var/tmp/ovirt-engine-appliance.qcow2// //2019-07-22 12:34:00,154: install_log = /root/ovirt/ovirt-appliance/engine-appliance/virt-install.log// //mount: /dev/loop0 is write-protected, mounting read-only// //Formatting '/var/tmp/ovirt-engine-appliance.qcow2', fmt=qcow2 size=54760833024 encryption=off cluster_size=65536 lazy_refcounts=off // //2019-07-22 12:34:10,195: Running virt-install.// // //Starting install...// //Retrieving file vmlinuz... | 6.3 MB 00:00 // //Retrieving file initrd.img... | 50 MB 00:00 // //Domain installation still in progress. You can reconnect to // //the console to complete the installation process.// //......// //2019-07-22 12:35:15,281: Installation error detected. See logfile.// //2019-07-22 12:35:15,283: Shutting down LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55// //Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed// // //Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been undefined// // //2019-07-22 12:35:15,599: unmounting the iso// //2019-07-22 12:35:20,612: Install failed: virt_install failed// //2019-07-22 12:35:20,613: Removing bad disk image// //2019-07-22 12:35:20,613: virt_install failed// //make: *** [ovirt-engine-appliance.qcow2] Error 1/
In the log I found the error as following from virt-install.log:
/16:35:07,472 ERR anaconda:CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection// //16:35:07,472 DEBUG anaconda:running handleException// //16:35:07,473 CRIT anaconda:Traceback (most recent call last):#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py", line 352, in _mainloop#012 prompt = last_screen.prompt(self._screens[-1][1])#012#012 File "/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py", line 107, in prompt#012 raise CmdlineError(errtxt)#012#012CmdlineError: The following mandatory spokes are not completed:#012Installation source#012Software selection// //16:35:08,020 DEBUG anaconda:Gtk cannot be initialized// //16:35:08,020 DEBUG anaconda:In the main thread, running exception handler// //16:35:08,386 NOTICE multipathd:zram0: add path (uevent)// //16:35:08,386 NOTICE multipathd:zram0: spurious uevent, path already in pathvec// //16:35:08,386 NOTICE multipathd:zram0: HDIO_GETGEO failed with 25// //16:35:08,386 ERR multipathd:zram0: failed to get path uid// //16:35:08,388 ERR multipathd:uevent trigger error/
Can you help me to fix the issue?
Sorry, I never tried to build it myself, nor have experience with livemedia-creator. As I wrote above, I suggest to compare your output/result with that of oVirt CI. Otherwise, I'd probably start debugging by searching the net for the error messages you received.
Good luck and best regards,
I tried to import ovirt-engine-appliance ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got error as following: Failed to load VM configuration from OVA file: /var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova
No idea why this failed.
I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.
It has CentOS + oVirt engine.
The only major use for it is by hosted-engine --deploy. In theory you can try importing it elsewhere, but I do not recall reports about people that tried this and whether it works.
Best regards,
-- Didi
participants (5)
-
Jingjie Jiang -
jingjie.jiang＠oracle.com
-
Strahil Nikolov -
Yedidyah Bar David -
Yuval Turgeman