Check on host 'node3' in the Network configuration if you have a network out of sync or any clues about the error . Best Regards, Strahil NikolovOn Nov 28, 2019 11:44, Kim Kargaard <Kim.Kargaard@noroff.no> wrote:
Hi,
I am getting the attached error when trying to move the Display from the one network to the other within the cluster. I can't see any place to set an IP for the vnic that I want to set as the display network.
Any thoughts?
Kim
On 28/11/2019, 06:41, "Strahil" <hunter86_bg@yahoo.com> wrote:
As far as I know , the engine plays a role as a proxy during the establishment of the connection. Check that you can reach both engine and the host from your system. For the same reason, I use noVNC - as you just need a single port to the engine in addition to the rest of the settings. Best Regards, Strahil NikolovOn Nov 27, 2019 11:27, kim.kargaard@noroff.no wrote: > > Hi, > > When trying to connect from a remote network on the spice console to a VM, I get the following error: > > (remote-viewer:80195): virt-viewer-WARNING **: 11:05:22.322: Channel error: Could not connect to proxy server xx.xx.xx.xx: Socket I/O timed out > > I found that the display is set to the management network and not the VM networkn in the cluster logical network. However, when I try to set the other vlan to be the display network, I get the following error: > > Error while executing action: Cannot edit Network. IP address has to be set for the NIC that bears a role network. Network: student-vlan100, Nic: p2p1.100 on host node3 violates that rule. > > I am not sure what this means. Any ideas? > > Kind regards > > Kim > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6YEI3I4NCAHQOT...
participants (1)
-
Strahil