5:53 a.m.
Has anyone had any success installing the docker Cinder interface for oVirt3.6 on
Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo "/start.sh"
4 days ago Restarting (127) 11 minutes ago ?
The Kolla project changed the way it distributed it's docker instances to use Ansible
to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and recommends using
the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start guide
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos docker package
which does seem to be the correct version, rather than build the very latest Docker as
recommended.
The error seems to indicate that the client has moved past the server version
recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version: 1.21, server API
version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something. It's
not obvious from the documentation exactly what I must do to get a usable image to test
Ceph on oVirt.
I think I need to just configure the container but it seems I have build a complete
Openstack Kolla implementation from source and load it into my own docker registry and
then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended only for the
addressee and may contain legally privileged, personal, sensitive or confidential
information. If you are not the intended addressee, and have received this email, any
transmission, distribution, downloading, printing or photocopying of the contents of this
message or attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed by reason of
delivery to any person other than intended addressee. If you have received this message
and are not the intended addressee you should notify the sender by return email and
destroy all copies of the message and any attachments. Unless expressly attributed, the
views expressed in this email do not necessarily represent the views of the company.
12:55 p.m.
I would contact their devs for help, configuring OSP is not something we
can really help with.
At least until we integrate with the Ansible deployment.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary(a)redhat.com
IRC : ydary
On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl <dbond(a)nrggos.com.au> wrote:
Has anyone had any success installing the docker Cinder interface
for
oVirt3.6 on Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo
"/start.sh" 4 days ago Restarting (127) 11 minutes
ago ?
The Kolla project changed the way it distributed it's docker instances to
use Ansible to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and
recommends using the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start
guide https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos
docker package which does seem to be the correct version, rather than build
the very latest Docker as recommended.
The error seems to indicate that the client has moved past the server
version recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version:
1.21, server API version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something.
It's not obvious from the documentation exactly what I must do to get a
usable image to test Ceph on oVirt.
I think I need to just configure the container but it seems I have build a
complete Openstack Kolla implementation from source and load it into my own
docker registry and then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended
only for the addressee and may contain legally privileged, personal,
sensitive or confidential information. If you are not the intended
addressee, and have received this email, any transmission, distribution,
downloading, printing or photocopying of the contents of this message or
attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed
by reason of delivery to any person other than intended addressee. If you
have received this message and are not the intended addressee you should
notify the sender by return email and destroy all copies of the message and
any attachments. Unless expressly attributed, the views expressed in this
email do not necessarily represent the views of the company.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:30 a.m.
Yaniv,
I don't want to build OSP, I just want a working cinder container to test oVirt Ceph
integration.
I am trying to follow the oVirt 3.6 release notes regarding the Cinder support:
>'Experimental Docker Integration
>oVirt Engine setup now provides experimental Cinder and Glance automated deployment
using Docker
>Cinder and Glance images are from kollaglue project.
https://github.com/openstack/kolla kollaglue is 'the official' effort from
openstack project to provide production-ready containers and deployment tools for
operating
>OpenStack clouds. The kollaglue Docker images are built by the Kolla project
maintainers. On oVirt side we have an optional plugin for oVirt engine-setup to pull and
deploy their ready to use containers (glance and cinder
>only) and automatically adding them into your oVirt engine isntance.
>Recently the cinder container setup for oVirt got broken cause
they introduced the use of Ansible's playbooks to customize and complete the container
setup and unfortunately we are still not ready for that. You should be
>able to manually setup cinder with that containers following this guides:
https://github.com/openstack/kolla/blob/master/doc/ansible-deployment.rst...
>guide.rst
>Glance container setup and its oVirt integration are still
working.
'
The ansible-deployment link is broken and the only thing that looks similar is their
quickstart guide.
I am simply asking if anyone has had any success manually setting it up.
Regards
Darryl
________________________________
From: Yaniv Dary <ydary(a)redhat.com>
Sent: Monday, 7 December 2015 9:55 PM
To: Bond, Darryl
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure
I would contact their devs for help, configuring OSP is not something we can really help
with.
At least until we integrate with the Ansible deployment.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary@redhat.com<mailto:ydary@redhat.com>
IRC : ydary
On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl
<dbond@nrggos.com.au<mailto:dbond@nrggos.com.au>> wrote:
Has anyone had any success installing the docker Cinder interface for oVirt3.6 on
Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo "/start.sh"
4 days ago Restarting (127) 11 minutes ago ?
The Kolla project changed the way it distributed it's docker instances to use Ansible
to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and recommends using
the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start guide
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos docker package
which does seem to be the correct version, rather than build the very latest Docker as
recommended.
The error seems to indicate that the client has moved past the server version
recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version: 1.21, server API
version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something. It's
not obvious from the documentation exactly what I must do to get a usable image to test
Ceph on oVirt.
I think I need to just configure the container but it seems I have build a complete
Openstack Kolla implementation from source and load it into my own docker registry and
then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended only for the
addressee and may contain legally privileged, personal, sensitive or confidential
information. If you are not the intended addressee, and have received this email, any
transmission, distribution, downloading, printing or photocopying of the contents of this
message or attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed by reason of
delivery to any person other than intended addressee. If you have received this message
and are not the intended addressee you should notify the sender by return email and
destroy all copies of the message and any attachments. Unless expressly attributed, the
views expressed in this email do not necessarily represent the views of the company.
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
11:22 a.m.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary(a)redhat.com
IRC : ydary
On Tue, Dec 8, 2015 at 5:30 AM, Bond, Darryl <dbond(a)nrggos.com.au> wrote:
Yaniv,
I don't want to build OSP, I just want a working cinder container to test
oVirt Ceph integration.
I am trying to follow the oVirt 3.6 release notes regarding the Cinder
support:
>>'Experimental Docker Integration
>>oVirt Engine setup now provides experimental Cinder and Glance automated
deployment using Docker
>>Cinder and Glance images are from kollaglue project.
https://github.com/openstack/kolla kollaglue is 'the official' effort
from openstack project to provide production-ready containers and
deployment tools for operating
>>OpenStack clouds. The kollaglue Docker images are built by the Kolla
project maintainers. On oVirt side we have an optional plugin for oVirt
engine-setup to pull and deploy their ready to use containers (glance and
cinder
>>only) and automatically adding them into your oVirt engine isntance.
>>Recently the cinder container setup for oVirt got broken cause they
introduced the use of Ansible's playbooks to customize and complete the
container setup and unfortunately we are still not ready for that. You
should be
>>able to manually setup cinder with that containers following this
guides:
https://github.com/openstack/kolla/blob/master/doc/ansible-deployment.rst...
>>guide.rst
>>Glance container setup and its oVirt integration are still working.
'
The ansible-deployment link is broken and the only thing that looks
similar is their quickstart guide.
This is the correct links:
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
https://github.com/openstack/kolla/blob/master/doc/ceph-guide.rst
I am simply asking if anyone has had any success manually setting it up.
Regards
Darryl
________________________________
From: Yaniv Dary <ydary(a)redhat.com>
Sent: Monday, 7 December 2015 9:55 PM
To: Bond, Darryl
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure
I would contact their devs for help, configuring OSP is not something we
can really help with.
At least until we integrate with the Ansible deployment.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary@redhat.com<mailto:ydary@redhat.com>
IRC : ydary
On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl <dbond(a)nrggos.com.au<mailto:
dbond(a)nrggos.com.au>> wrote:
Has anyone had any success installing the docker Cinder interface for
oVirt3.6 on Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo
"/start.sh" 4 days ago Restarting (127) 11 minutes
ago ?
The Kolla project changed the way it distributed it's docker instances to
use Ansible to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and
recommends using the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start
guide https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos
docker package which does seem to be the correct version, rather than build
the very latest Docker as recommended.
The error seems to indicate that the client has moved past the server
version recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version:
1.21, server API version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something.
It's not obvious from the documentation exactly what I must do to get a
usable image to test Ceph on oVirt.
I think I need to just configure the container but it seems I have build a
complete Openstack Kolla implementation from source and load it into my own
docker registry and then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended
only for the addressee and may contain legally privileged, personal,
sensitive or confidential information. If you are not the intended
addressee, and have received this email, any transmission, distribution,
downloading, printing or photocopying of the contents of this message or
attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed
by reason of delivery to any person other than intended addressee. If you
have received this message and are not the intended addressee you should
notify the sender by return email and destroy all copies of the message and
any attachments. Unless expressly attributed, the views expressed in this
email do not necessarily represent the views of the company.
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
10:15 p.m.
Yes, those are the links I have been trying to use. I don't need the ceph guide as I
already have a working ceph cluster.
Has anyone had any success setting up a cinder container with those links?
Darryl
________________________________
From: Yaniv Dary <ydary(a)redhat.com>
Sent: Tuesday, 8 December 2015 8:22 PM
To: Bond, Darryl
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary@redhat.com<mailto:ydary@redhat.com>
IRC : ydary
On Tue, Dec 8, 2015 at 5:30 AM, Bond, Darryl
<dbond@nrggos.com.au<mailto:dbond@nrggos.com.au>> wrote:
Yaniv,
I don't want to build OSP, I just want a working cinder container to test oVirt Ceph
integration.
I am trying to follow the oVirt 3.6 release notes regarding the Cinder support:
>'Experimental Docker Integration
>oVirt Engine setup now provides experimental Cinder and Glance automated deployment
using Docker
>Cinder and Glance images are from kollaglue project.
https://github.com/openstack/kolla kollaglue is 'the official' effort from
openstack project to provide production-ready containers and deployment tools for
operating
>OpenStack clouds. The kollaglue Docker images are built by the Kolla project
maintainers. On oVirt side we have an optional plugin for oVirt engine-setup to pull and
deploy their ready to use containers (glance and cinder
>only) and automatically adding them into your oVirt engine isntance.
>Recently the cinder container setup for oVirt got broken cause
they introduced the use of Ansible's playbooks to customize and complete the container
setup and unfortunately we are still not ready for that. You should be
>able to manually setup cinder with that containers following this guides:
https://github.com/openstack/kolla/blob/master/doc/ansible-deployment.rst...
>guide.rst
>Glance container setup and its oVirt integration are still
working.
'
The ansible-deployment link is broken and the only thing that looks similar is their
quickstart guide.
This is the correct links:
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
https://github.com/openstack/kolla/blob/master/doc/ceph-guide.rst
I am simply asking if anyone has had any success manually setting it up.
Regards
Darryl
________________________________
From: Yaniv Dary <ydary@redhat.com<mailto:ydary@redhat.com>>
Sent: Monday, 7 December 2015 9:55 PM
To: Bond, Darryl
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: Re: [ovirt-users] Cinder docker installation failure
I would contact their devs for help, configuring OSP is not something we can really help
with.
At least until we integrate with the Ansible deployment.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306<tel:%2B972%20%289%29%207692306>
8272306
Email:
ydary@redhat.com<mailto:ydary@redhat.com><mailto:ydary@redhat.com<mailto:ydary@redhat.com>>
IRC : ydary
On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl
<dbond@nrggos.com.au<mailto:dbond@nrggos.com.au><mailto:dbond@nrggos.com.au<mailto:dbond@nrggos.com.au>>>
wrote:
Has anyone had any success installing the docker Cinder interface for oVirt3.6 on
Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo "/start.sh"
4 days ago Restarting (127) 11 minutes ago ?
The Kolla project changed the way it distributed it's docker instances to use Ansible
to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and recommends using
the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start guide
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos docker package
which does seem to be the correct version, rather than build the very latest Docker as
recommended.
The error seems to indicate that the client has moved past the server version
recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version: 1.21, server API
version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something. It's
not obvious from the documentation exactly what I must do to get a usable image to test
Ceph on oVirt.
I think I need to just configure the container but it seems I have build a complete
Openstack Kolla implementation from source and load it into my own docker registry and
then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended only for the
addressee and may contain legally privileged, personal, sensitive or confidential
information. If you are not the intended addressee, and have received this email, any
transmission, distribution, downloading, printing or photocopying of the contents of this
message or attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed by reason of
delivery to any person other than intended addressee. If you have received this message
and are not the intended addressee you should notify the sender by return email and
destroy all copies of the message and any attachments. Unless expressly attributed, the
views expressed in this email do not necessarily represent the views of the company.
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org><mailto:Users@ovirt.org<mailto:Users@ovirt.org>>
http://lists.ovirt.org/mailman/listinfo/users
2:01 a.m.
Crickets...
Well I suppose it answers my question.
If no-one is trying to use Kolla docker Cinder on Centos, what platform are they using for
all the bug reports for Cinder integration???
Darryl
________________________________________
From: users-bounces(a)ovirt.org <users-bounces(a)ovirt.org> on behalf of Bond, Darryl
<dbond(a)nrggos.com.au>
Sent: Wednesday, 9 December 2015 7:15 AM
To: Yaniv Dary
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure
Yes, those are the links I have been trying to use. I don't need the ceph guide as I
already have a working ceph cluster.
Has anyone had any success setting up a cinder container with those links?
Darryl
________________________________
From: Yaniv Dary <ydary(a)redhat.com>
Sent: Tuesday, 8 December 2015 8:22 PM
To: Bond, Darryl
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary@redhat.com<mailto:ydary@redhat.com>
IRC : ydary
On Tue, Dec 8, 2015 at 5:30 AM, Bond, Darryl
<dbond@nrggos.com.au<mailto:dbond@nrggos.com.au>> wrote:
Yaniv,
I don't want to build OSP, I just want a working cinder container to test oVirt Ceph
integration.
I am trying to follow the oVirt 3.6 release notes regarding the Cinder support:
>'Experimental Docker Integration
>oVirt Engine setup now provides experimental Cinder and Glance automated deployment
using Docker
>Cinder and Glance images are from kollaglue project.
https://github.com/openstack/kolla kollaglue is 'the official' effort from
openstack project to provide production-ready containers and deployment tools for
operating
>OpenStack clouds. The kollaglue Docker images are built by the Kolla project
maintainers. On oVirt side we have an optional plugin for oVirt engine-setup to pull and
deploy their ready to use containers (glance and cinder
>only) and automatically adding them into your oVirt engine isntance.
>Recently the cinder container setup for oVirt got broken cause
they introduced the use of Ansible's playbooks to customize and complete the container
setup and unfortunately we are still not ready for that. You should be
>able to manually setup cinder with that containers following this guides:
https://github.com/openstack/kolla/blob/master/doc/ansible-deployment.rst...
>guide.rst
>Glance container setup and its oVirt integration are still
working.
'
The ansible-deployment link is broken and the only thing that looks similar is their
quickstart guide.
This is the correct links:
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
https://github.com/openstack/kolla/blob/master/doc/ceph-guide.rst
I am simply asking if anyone has had any success manually setting it up.
Regards
Darryl
________________________________
From: Yaniv Dary <ydary@redhat.com<mailto:ydary@redhat.com>>
Sent: Monday, 7 December 2015 9:55 PM
To: Bond, Darryl
Cc: users@ovirt.org<mailto:users@ovirt.org>
Subject: Re: [ovirt-users] Cinder docker installation failure
I would contact their devs for help, configuring OSP is not something we can really help
with.
At least until we integrate with the Ansible deployment.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306<tel:%2B972%20%289%29%207692306>
8272306
Email:
ydary@redhat.com<mailto:ydary@redhat.com><mailto:ydary@redhat.com<mailto:ydary@redhat.com>>
IRC : ydary
On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl
<dbond@nrggos.com.au<mailto:dbond@nrggos.com.au><mailto:dbond@nrggos.com.au<mailto:dbond@nrggos.com.au>>>
wrote:
Has anyone had any success installing the docker Cinder interface for oVirt3.6 on
Centos7.1?
Using the current Engine installation ends up with a non-functioning cinder
a83ce47cef7e kollaglue/centos-rdo-cinder:kilo "/start.sh"
4 days ago Restarting (127) 11 minutes ago ?
The Kolla project changed the way it distributed it's docker instances to use Ansible
to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and recommends using
the Kolla documentation.
I have been beating my head against the kolla 'so called' quick start guide
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
I haven't followed the guide to the letter, eg I want to use the Centos docker package
which does seem to be the correct version, rather than build the very latest Docker as
recommended.
The error seems to indicate that the client has moved past the server version
recommended.
failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version: 1.21, server API
version: 1.20)
FATAL: all hosts have already failed -- aborting
I can't work out whether the build just broken or I have missed something. It's
not obvious from the documentation exactly what I must do to get a usable image to test
Ceph on oVirt.
I think I need to just configure the container but it seems I have build a complete
Openstack Kolla implementation from source and load it into my own docker registry and
then configure it????
Regards
Darryl
________________________________
The contents of this electronic message and any attachments are intended only for the
addressee and may contain legally privileged, personal, sensitive or confidential
information. If you are not the intended addressee, and have received this email, any
transmission, distribution, downloading, printing or photocopying of the contents of this
message or attachments is strictly prohibited. Any legal privilege or confidentiality
attached to this message and attachments is not waived, lost or destroyed by reason of
delivery to any person other than intended addressee. If you have received this message
and are not the intended addressee you should notify the sender by return email and
destroy all copies of the message and any attachments. Unless expressly attributed, the
views expressed in this email do not necessarily represent the views of the company.
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org><mailto:Users@ovirt.org<mailto:Users@ovirt.org>>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3077
days inactive
3085
days old
5 comments
2 participants
participants (2)
-
Bond, Darryl -
Yaniv Dary