2:55 a.m.
--=_afabac77-ef64-44d9-8f8e-f48f95661dc2
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hello, currently I'm using kvms with pcs&drbd on vms... is there any ovirt
solution for ha with two nodes (storage on local disks) without pcs& drbd for storage?
I know about gluster storage but it needs third host;/
--=_afabac77-ef64-44d9-8f8e-f48f95661dc2
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html><body><div style="font-family: arial, helvetica, sans-serif;
font-size: 12pt; color: #000000"><div> <!--StartFragment-->Hello,
currently I'm using kvms with pcs&drbd on vms... is there any ovirt solution
for ha with two nodes (storage on local disks) without pcs& drbd for storage? I
know about gluster storage but it needs third host;/<!--EndFragment-->
</div></div></body></html>
--=_afabac77-ef64-44d9-8f8e-f48f95661dc2--
6:03 a.m.
2017-12-15 8:55 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
Hello, currently I'm using kvms with pcs&drbd on vms... is
there any ovirt
solution for ha with two nodes (storage on local disks) without pcs& drbd
for storage? I know about gluster storage but it needs third host;/
Did you check
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.3...
?
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
6:53 a.m.
--=_ba41fc08-a36b-4ece-81dc-bf1d52d96cb0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Yes, I checked it but it seems I still need three nodes - 2 for storage and=
one smaller for arbiter.=20
Is it safe to deploy it only on two nodes?=20
Am I wrong?=20
From: "Sandro Bonazzola" <sbonazzo(a)redhat.com>=20
To: "Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>=20
Cc: "users" <users(a)ovirt.org>=20
Sent: Friday, December 15, 2017 12:03:24 PM=20
Subject: Re: [ovirt-users] Two node configuration.=20
2017-12-15 8:55 GMT+01:00 Jarek < [ mailto:jaru@jaru.eu.org | jaru(a)jaru.eu.=
org ] > :=20
Hello, currently I'm using kvms with pcs&drbd on vms... is there any ovirt =
solution for ha with two nodes (storage on local disks) without pcs& drbd f=
or storage? I know about gluster storage but it needs third host;/=20
Did you check [ https://access.redhat.com/documentation/en-us/red_hat_glust=
er_storage/3.3/html/administration_guide/creating_arbitrated_replicated_vol=
umes | https://access.redhat.com/documentation/en-us/red_hat_gluster_storag=
e/3.3/html/administration_guide/creating_arbitrated_replicated_volumes ] ?=
=20
BQ_BEGIN
_______________________________________________=20
Users mailing list=20
[ mailto:Users@ovirt.org | Users(a)ovirt.org ]=20
[ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/ma=
ilman/listinfo/users ]=20
BQ_END
--=20
SANDRO BONAZZOLA=20
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D=20
[ https://www.redhat.com/ | Red Hat=C2=A0EMEA ]=20
[ https://red.ht/sig ]=20
=09
[ https://redhat.com/trusted | TRIED. TESTED. TRUSTED. ]=20
--=_ba41fc08-a36b-4ece-81dc-bf1d52d96cb0
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: arial, helvetica, sans-serif;
font-s=
ize: 12pt; color: #000000"><div>Yes, I checked it but it seems I still
need=
three nodes - 2 for storage and one smaller for
arbiter.<br></div><div>Is =
it safe to deploy it only on two nodes?<br
data-mce-bogus=3D"1"></div><div>=
Am I wrong?<br
data-mce-bogus=3D"1"></div><div><br></div><hr
id=3D"zwchr" d=
ata-marker=3D"__DIVIDER__"><div
data-marker=3D"__HEADERS__"><b>From: </b>"S=
andro Bonazzola" &lt;sbonazzo(a)redhat.com&gt;<br><b>To:
</b>"Jaroslaw August=
ynowicz" &lt;jaru(a)jaru.eu.org&gt;<br><b>Cc:
</b>"users" &lt;users(a)ovirt.org=
><br><b>Sent: </b>Friday, December 15, 2017 12:03:24
PM<br><b>Subject: <=
/b>Re: [ovirt-users] Two node configuration.<br></div><br><div
data-marker=
=3D"__QUOTED_TEXT__"><div dir=3D"ltr"><br><div
class=3D"gmail_extra"><br><d=
iv class=3D"gmail_quote">2017-12-15 8:55 GMT+01:00 Jarek <span
dir=3D"ltr">=
<<a href=3D"mailto:jaru@jaru.eu.org"
target=3D"_blank">jaru(a)jaru.eu.org<=
/a>></span>:<br><blockquote class=3D"gmail_quote"
style=3D"margin:0px 0p=
x 0px 0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><div><=
div style=3D"font-family:arial,helvetica,sans-serif;font-size:12pt;color:rg=
b(0,0,0)"><div> Hello, currently I'm using kvms with pcs&drbd on
vms...=
is there any ovirt solution for ha with two nodes (storage on local disks)=
without pcs& drbd for storage? I know about gluster storage but it nee=
ds third
host;/</div></div></div></blockquote><br><div>Did you
check <=
a href=3D"https://access.redhat.com/documentation/en-us/red_hat_gluste...
rage/3.3/html/administration_guide/creating_arbitrated_replicated_volumes" =
target=3D"_blank">https://access.redhat.com/documentation/en...
ster_storage/3.3/html/administration_guide/creating_arbitrated_replicated_v=
olumes</a>
?</div><br><br><div> </div><blockquote
class=3D"gmail_quote=
" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);=
padding-left:1ex"><div><div
style=3D"font-family:arial,helvetica,sans-serif=
;font-size:12pt;color:rgb(0,0,0)"><div>
</div></div></div><br>_____________=
__________________________________<br Users
mailing list<br <a
href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users(a)ovirt.org</a><br=
<a
href=3D"http://lists.ovirt.org/mailman/listinfo/users" rel=3D"noreferrer=
"
target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/us... <br></blockquote></div><br><br
clear=3D"all"><br>-- <br><div class=3D"gmail=
_signature"><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><d=
iv><div dir=3D"ltr"><div><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"=
</div></div><br></div></div></body></html --=_ba41fc08-a36b-4ece-81dc-bf1d52d96cb0--
<div dir=3D"ltr"><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-se=
rif;font-weight:bold;margin:0px;padding:0px;font-size:14px;text-transform:u=
ppercase"><span>SANDRO</span> <span>BONAZZOLA</span></p><p
style=3D"co=
lor:rgb(0,0,0);font-family:overpass,sans-serif;font-size:10px;margin:0px 0p=
x 4px;text-transform:uppercase"><span>ASSOCIATE MANAGER, SOFTWARE
ENGINEERI=
NG, EMEA ENG VIRTUALIZATION R&D</span></p><p
style=3D"font-family:overp=
ass,sans-serif;margin:0px;font-size:10px;color:rgb(153,153,153)"><a href=3D=
"https://www.redhat.com/" style=3D"color:rgb(0,136,206);margin:0px"
target=
=3D"_blank">Red Hat <span>EMEA</span></a><br
data-mce-bogus=3D"1"></p>=
<table style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:=
medium" border=3D"0"><tbody><tr><td
width=3D"100px"><a href=3D"https://red.=
ht/sig" target=3D"_blank"><img
src=3D"https://www.redhat.com/profiles/rh/th=
emes/redhatdotcom/img/logo-red-hat-black.png" width=3D"90"
height=3D"auto">=
</a><br data-mce-bogus=3D"1"></td><td
style=3D"font-size:10px"><div><a href=
=3D"https://redhat.com/trusted"
style=3D"color:rgb(204,0,0);font-weight:bol=
d" target=3D"_blank">TRIED. TESTED. TRUSTED.</a><br
data-mce-bogus=3D"1"></=
div></td></tr></tbody></table><br></div></div></div></div></div></div></div=
></div></div></div></div></div></div
7:02 a.m.
This is a multi-part message in MIME format.
------------1605a0da24624bb2768b1bd18
Content-Type: text/plain; format=flowed; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
No it is not safe to only use two nodes as you can end up with split brai=
n.
So two nodes and an arbiter node is needed. The arbiter doesn't need to =
be=20
that fancy.
Also the installer if installed with gluster as hosted storage (storage f=
or=20
the engine) will complain if replica is less than 3.
/Johan
On December 15, 2017 12:54:14 PM Jarek <jaru(a)jaru.eu.org> wrote:
<head </head
<body <div style=3D"color:
black;" <div style=3D"color:
black;" <p style=3D"margin: 0 0 1em
0; color: black;">No it is not safe to only use=
two nodes as you can end up with split brain.</p <p
style=3D"margin: 0 0 1em 0; color: black;"> So two nodes and an arbiter =
node is needed. The arbiter doesn't need to be that fancy.</p <p style=3D"margin: 0 0 1em 0; color:
black;">Also the installer if install=
ed with gluster as hosted storage (storage for the engine) will complain if=
replica is less than 3.</p <p style=3D"margin: 0 0 1em
0; color: black;">/Johan</p
</div <div style=3D"color:
black;" <p style=3D"color: black;
font-size: 10pt; font-family: Arial, sans-serif; =
margin: 10pt 0;">On December 15, 2017 12:54:14 PM Jarek &lt;jaru(a)jaru.eu.or=
g> wrote:</p <blockquote
type=3D"cite" class=3D"gmail_quote" style=3D"margin: 0 0 0 0.75=
ex; border-left: 1px solid #808080; padding-left: 0.75ex;" <div style=3D"font-family: arial, helvetica,
sans-serif; font-size: 12pt; c=
olor: #000000"><div>Yes, I checked it but it seems I still need three
nodes=
- 2 for storage and one smaller for arbiter.<br></div><div>Is it safe
to d=
eploy it only on two nodes?<br
data-mce-bogus=3D"1"></div><div>Am I wrong?<=
br data-mce-bogus=3D"1"></div><div><br></div><hr
id=3D"zwchr" data-marker=
=3D"__DIVIDER__"><div
data-marker=3D"__HEADERS__"><b>From: </b>"Sandro Bona=
zzola" &lt;sbonazzo(a)redhat.com&gt;<br><b>To:
</b>"Jaroslaw Augustynowicz" &=
lt;jaru(a)jaru.eu.org&gt;<br><b>Cc: </b>"users"
&lt;users(a)ovirt.org&gt;<br><b=
Users mailing list<br <a href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users(a)ovirt.org</a><br=
<a
href=3D"http://lists.ovirt.org/mailman/listinfo/users" rel=3D"noreferrer=
"
target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/us... <br></blockquote></div><br><br
clear=3D"all"><br>-- <br><div class=3D"gmail=
_signature"><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><d=
iv><div dir=3D"ltr"><div><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"=
</div></div><br></div></div _______________________________________________<br Users mailing list<br <a
class=3D"aqm-autolink aqm-autowrap"
href=3D"mailto:Users%40ovirt.org">Us=
ers(a)ovirt.org</a><br <a class=3D"aqm-autolink
aqm-autowrap" href=3D"http://lists.ovirt.org/mailm=
an/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users&... <br></blockquote
</div </div </body
</html
------------1605a0da24624bb2768b1bd18--
Yes, I checked it but it seems I still need three nodes - 2 for
storage=
and=20
one smaller for arbiter.
Is it safe to deploy it only on two nodes?
Am I wrong?
From: "Sandro Bonazzola" <sbonazzo(a)redhat.com To:
"Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org Cc:
"users" <users(a)ovirt.org Sent:
Friday, December 15, 2017 12:03:24 PM
Subject: Re: [ovirt-users] Two node configuration.
2017-12-15 8:55 GMT+01:00 Jarek < [ mailto:jaru@jaru.eu.org |=20
jaru(a)jaru.eu.org ] > :
Hello, currently I'm using kvms with pcs&drbd on vms... is there any ov=
irt=20
solution for ha with two nodes (storage on local disks) without
pcs& dr=
bd=20
for storage? I know about gluster storage but it needs third host;/
Did you check [=20
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3=
.3/html/administration_guide/creating_arbitrated_replicated_volumes=20
.3/html/administration_guide/creating_arbitrated_replicated_volumes=20
] ?
BQ_BEGIN
_______________________________________________
Users mailing list
[ mailto:Users@ovirt.org | Users(a)ovirt.org ]
[ http://lists.ovirt.org/mailman/listinfo/users |=20
http://lists.ovirt.org/mailman/listinfo/users ]
BQ_END
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
[ https://www.redhat.com/ | Red Hat=C2=A0EMEA ]
[ https://red.ht/sig ]
=09
[ https://redhat.com/trusted | TRIED. TESTED. TRUSTED. ]
----------
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
------------1605a0da24624bb2768b1bd18
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
<htmlSent: </b>Friday, December 15, 2017 12:03:24
PM<br><b>Subject: </b>Re: [ov=
irt-users] Two node
configuration.<br></div><br><div data-marker=3D"__QUOTE=
D_TEXT__"><div dir=3D"ltr"><br><div
class=3D"gmail_extra"><br><div class=3D=
"gmail_quote">2017-12-15 8:55 GMT+01:00 Jarek <span
dir=3D"ltr"><<a href=
=3D"mailto:jaru@jaru.eu.org"
target=3D"_blank">jaru(a)jaru.eu.org</a>&gt;</sp=
an>:<br><blockquote class=3D"gmail_quote" style=3D"margin:0px
0px 0px 0.8ex=
;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div
style=
=3D"font-family:arial,helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)"=
<div> Hello, currently I'm using kvms with pcs&drbd
on vms... is there=
any ovirt solution for ha with two nodes (storage on local
disks) without =
pcs& drbd for storage? I know about gluster storage but it needs third =
host;/</div></div></div></blockquote><br><div>Did you
check <a href=3D=
"https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.3/=
html/administration_guide/creating_arbitrated_replicated_volumes" target=3D=
"_blank">https://access.redhat.com/documentation/en-us/red_hat_gluster_stor=
age/3.3/html/administration_guide/creating_arbitrated_replicated_volumes</a=
?</div><br><br><div> </div><blockquote
class=3D"gmail_quote" style=
=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding=
-left:1ex"><div><div
style=3D"font-family:arial,helvetica,sans-serif;font-s=
ize:12pt;color:rgb(0,0,0)"><div>
</div></div></div><br>____________________=
___________________________<br<div dir=3D"ltr"><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-se=
rif;font-weight:bold;margin:0px;padding:0px;font-size:14px;text-transform:u=
ppercase"><span>SANDRO</span> <span>BONAZZOLA</span></p><p
style=3D"co=
lor:rgb(0,0,0);font-family:overpass,sans-serif;font-size:10px;margin:0px 0p=
x 4px;text-transform:uppercase"><span>ASSOCIATE MANAGER, SOFTWARE
ENGINEERI=
NG, EMEA ENG VIRTUALIZATION R&D</span></p><p
style=3D"font-family:overp=
ass,sans-serif;margin:0px;font-size:10px;color:rgb(153,153,153)"><a href=3D=
"https://www.redhat.com/" style=3D"color:rgb(0,136,206);margin:0px"
target=
=3D"_blank">Red Hat <span>EMEA</span></a><br
data-mce-bogus=3D"1"></p>=
<table style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:=
medium" border=3D"0"><tbody><tr><td
width=3D"100px"><a href=3D"https://red.=
ht/sig" target=3D"_blank"><img
src=3D"https://www.redhat.com/profiles/rh/th=
emes/redhatdotcom/img/logo-red-hat-black.png" width=3D"90"
height=3D"auto">=
</a><br data-mce-bogus=3D"1"></td><td
style=3D"font-size:10px"><div><a href=
=3D"https://redhat.com/trusted"
style=3D"color:rgb(204,0,0);font-weight:bol=
d" target=3D"_blank">TRIED. TESTED. TRUSTED.</a><br
data-mce-bogus=3D"1"></=
div></td></tr></tbody></table><br></div></div></div></div></div></div></div=
></div></div></div></div></div></div
7:05 a.m.
2017-12-15 12:53 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
Yes, I checked it but it seems I still need three nodes - 2 for
storage
and one smaller for arbiter.
Is it safe to deploy it only on two nodes?
the host arbiter can be even just a Raspberry PI as far as I can tell.
Adding Sahina.
Am I wrong?
------------------------------
*From: *"Sandro Bonazzola" <sbonazzo(a)redhat.com>
*To: *"Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>
*Cc: *"users" <users(a)ovirt.org>
*Sent: *Friday, December 15, 2017 12:03:24 PM
*Subject: *Re: [ovirt-users] Two node configuration.
2017-12-15 8:55 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
> Hello, currently I'm using kvms with pcs&drbd on vms... is there any
> ovirt solution for ha with two nodes (storage on local disks) without pcs&
> drbd for storage? I know about gluster storage but it needs third host;/
>
Did you check https://access.redhat.com/documentation/en-us/red_
hat_gluster_storage/3.3/html/administration_guide/creating_
arbitrated_replicated_volumes ?
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
10:37 a.m.
------V9SJVW1V1NICNHFJD5OIS7KTISNRVZ
Content-Type: text/plain;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
It can be good idea:
2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms wi=
th pcs and drbd for arbiter=2E
I'll test it=2E=20
Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <sbonazzo@redhat=2Ecom=
napisa=C5=82(a):
2017-12-15 12:53 GMT+01:00 Jarek <jaru@jaru=2Eeu=2Eorg>:
> Yes, I checked it but it seems I still need three nodes - 2 for
storage
> and one smaller for arbiter=2E
> Is it safe to deploy it only on two nodes?
>
the host arbiter can be even just a Raspberry PI as far as I can tell=2E
Adding Sahina=2E
> Am I wrong?
>
> ------------------------------
> *From: *"Sandro Bonazzola" <sbonazzo@redhat=2Ecom>
> *To: *"Jaroslaw Augustynowicz" <jaru@jaru=2Eeu=2Eorg>
> *Cc: *"users" <users@ovirt=2Eorg>
> *Sent: *Friday, December 15, 2017 12:03:24 PM
> *Subject: *Re: [ovirt-users] Two node configuration=2E
>
>
>
> 2017-12-15 8:55 GMT+01:00 Jarek <jaru@jaru=2Eeu=2Eorg>:
>
>> Hello, currently I'm using kvms with pcs&drbd on vms=2E=2E=2E is there=
any
>> ovirt solution for ha with two nodes (storage on local
disks)
without pcs&
>> drbd for storage? I know about gluster storage but it needs third
host;/
>>
>
> Did you check https://access=2Eredhat=2Ecom/documentation/en-us/red_
> hat_gluster_storage/3=2E3/html/administration_guide/creating_
> arbitrated_replicated_volumes ?
>
>
>
>
>>
>> _______________________________________________
>> Users mailing list
>> Users@ovirt=2Eorg
>> http://lists=2Eovirt=2Eorg/mailman/listinfo/users
>>
>>
>
>
> --
>
> SANDRO BONAZZOLA
>
> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>
> Red Hat EMEA <https://www=2Eredhat=2Ecom/>
> <https://red=2Eht/sig>
> TRIED=2E TESTED=2E TRUSTED=2E <https://redhat=2Ecom/trusted>
>
>
>
--=20
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www=2Eredhat=2Ecom/>
<https://red=2Eht/sig>
TRIED=2E TESTED=2E TRUSTED=2E <https://redhat=2Ecom/trusted>
------V9SJVW1V1NICNHFJD5OIS7KTISNRVZ
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head></head><body>It can be good idea:<br>
2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms wi=
th pcs and drbd for arbiter=2E<br>
I'll test it=2E <br><br><div
class=3D"gmail_quote">Dnia 15 grudnia 201=
7 13:05:08 CET, Sandro Bonazzola <sbonazzo@redhat=2Ecom> napisa=C5=82=
(a):<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt
0=2E8ex;=
border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div dir=3D"ltr"><br /><div
class=3D"gmail_extra"><br /><div class=3D"gmai=
l_quote">2017-12-15 12:53 GMT+01:00 Jarek <span
dir=3D"ltr"><<a href=3D"=
mailto:jaru@jaru=2Eeu=2Eorg"
target=3D"_blank">jaru@jaru=2Eeu=2Eorg</a>>=
</span>:<br /><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 0 =2E8e=
x;border-left:1px #ccc solid;padding-left:1ex"><div><div
style=3D"font-fami=
ly:arial,helvetica,sans-serif;font-size:12pt;color:#000000"><div>Yes, I
che=
cked it but it seems I still need three nodes - 2 for storage and one small=
er for arbiter=2E<br /></div><div>Is it safe to deploy it only on two
nodes=
?<br /></div></div></div></blockquote><div><br
/></div><div>the host arbite=
r can be even just a Raspberry PI as far as I can tell=2E</div><div>Adding =
Sahina=2E</div><div><br
/></div><div> </div><blockquote class=3D"gmail=
_quote" style=3D"margin:0 0 0 =2E8ex;border-left:1px #ccc solid;padding-lef=
t:1ex"><div><div
style=3D"font-family:arial,helvetica,sans-serif;font-size:=
12pt;color:#000000"><div></div><div>Am I wrong?<br
/></div><div><br /></div=
<hr id=3D"m_7739355658544100534zwchr"
/><div><b>From: </b>"Sandro Bon=
azzola"
<<a href=3D"mailto:sbonazzo@redhat=2Ecom"
target=3D"_blank"=
sbonazzo@redhat=2Ecom</a>><br /><b>To:
</b>"Jaroslaw Augustynowicz=
" <<a
href=3D"mailto:jaru@jaru=2Eeu=2Eorg" target=3D"_blank">jaru@j=
aru=2Eeu=2Eorg</a>><br /><b>Cc:
</b>"users" <<a href=3D"mai=
lto:users@ovirt=2Eorg"
target=3D"_blank">users@ovirt=2Eorg</a>><br /><b>=
Sent: </b>Friday, December 15, 2017 12:03:24 PM<br /><b>Subject:
</b>Re: [o=
virt-users] Two node configuration=2E<br /></div><div><div
class=3D"h5"><br=
/><div><div dir=3D"ltr"><br /><div
class=3D"gmail_extra"><br /><div class=
=3D"gmail_quote">2017-12-15 8:55 GMT+01:00 Jarek <span
dir=3D"ltr"><<a h=
ref=3D"mailto:jaru@jaru=2Eeu=2Eorg"
target=3D"_blank">jaru@jaru=2Eeu=2Eorg<=
/a>></span>:<br /><blockquote class=3D"gmail_quote"
style=3D"margin:0px =
0px 0px 0=2E8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><d=
iv><div style=3D"font-family:arial,helvetica,sans-serif;font-size:12pt;colo=
r:rgb(0,0,0)"><div> Hello, currently I'm using kvms with
pcs&drbd on vm=
s=2E=2E=2E is there any ovirt solution for ha with two nodes (storage on lo=
cal disks) without pcs& drbd for storage? I know about gluster storage =
but it needs third host;/</div></div></div></blockquote><br
/><div>Did you =
check <a href=3D"https://access=2Eredhat=2Ecom/documentation/en-us/red=
_hat_gluster_storage/3=2E3/html/administration_guide/creating_arbitrated_re=
plicated_volumes" target=3D"_blank">https://access=2Eredhat=2E<wbr
/>com/do=
cumentation/en-us/red_<wbr />hat_gluster_storage/3=2E3/html/<wbr />administ=
ration_guide/creating_<wbr />arbitrated_replicated_volumes</a>
?</div><br /=
<br /><div> </div><blockquote
class=3D"gmail_quote" style=3D"margin:0=
px 0px 0px
0=2E8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"=
<div><div
style=3D"font-family:arial,helvetica,sans-serif;font-size:12pt;c=
olor:rgb(0,0,0)"><div> </div></div></div><br
/>____________________________=
__<wbr />_________________<br />
Users mailing list<br />
<a href=3D"mailto:Users@ovirt=2Eorg"
target=3D"_blank">Users@ovirt=2Eorg</=
a><br />
<a href=3D"http://lists=2Eovirt=2Eorg/mailman/listinfo/users"
rel=3D"noref=
errer" target=3D"_blank">http://lists=2Eovirt=2Eorg/<wbr
/>mailman/listinfo=
/users</a><br />
<br /></blockquote></div><br /><br clear=3D"all"
/><br />-- <br /><div cla=
ss=3D"m_7739355658544100534gmail_signature"><div
dir=3D"ltr"><div><div dir=
=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr">=
<div dir=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><p style=3D"color:rgb(0,=
0,0);font-family:overpass,sans-serif;font-weight:bold;margin:0px;padding:0p=
x;font-size:14px;text-transform:uppercase"><span>SANDRO</span> <span>B=
ONAZZOLA</span></p><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-s=
erif;font-size:10px;margin:0px 0px
4px;text-transform:uppercase"><span>ASSO=
CIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D</span>=
</p><p
style=3D"font-family:overpass,sans-serif;margin:0px;font-size:10px;c=
olor:rgb(153,153,153)"><a href=3D"https://www=2Eredhat=2Ecom/"
style=3D"col=
or:rgb(0,136,206);margin:0px" target=3D"_blank">Red
Hat <span>EMEA</sp=
an></a><br /></p><table
style=3D"color:rgb(0,0,0);font-family:overpass,sans=
-serif;font-size:medium" border=3D"0"><tbody><tr><td
width=3D"100px"><a hre=
f=3D"https://red=2Eht/sig" target=3D"_blank"><img
width=3D"90" height=3D"au=
to" /></a><br /></td><td
style=3D"font-size:10px"><div><a href=3D"https://r=
edhat=2Ecom/trusted" style=3D"color:rgb(204,0,0);font-weight:bold" target=
=3D"_blank">TRIED=2E TESTED=2E TRUSTED=2E</a><br
/></div></td></tr></tbody>=
</table><br
/></div></div></div></div></div></div></div></div></div></div><=
/div></div></div>
</div></div><br
/></div></div></div></div></div></blockquote></div><br
/><=
br clear=3D"all" /><div><br /></div>-- <br /><div
class=3D"gmail_signature"=
data-smartmail=3D"gmail_signature"><div
dir=3D"ltr"><div><div dir=3D"ltr">=
<div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><div dir=
=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><p style=3D"color:rgb(0,0,0);fon=
t-family:overpass,sans-serif;font-weight:bold;margin:0px;padding:0px;font-s=
ize:14px;text-transform:uppercase"><span>SANDRO</span> <span>BONAZZOLA=
</span></p><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;fon=
t-size:10px;margin:0px 0px 4px;text-transform:uppercase"><span>ASSOCIATE
MA=
NAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION
R&D</span></p><p s=
tyle=3D"font-family:overpass,sans-serif;margin:0px;font-size:10px;color:rgb=
(153,153,153)"><a href=3D"https://www=2Eredhat=2Ecom/"
style=3D"color:rgb(0=
,136,206);margin:0px" target=3D"_blank">Red
Hat <span>EMEA</span></a><=
/p><table border=3D"0"
style=3D"color:rgb(0,0,0);font-family:overpass,sans-=
serif;font-size:medium"><tbody><tr><td
width=3D"100px"><a href=3D"https://r=
ed=2Eht/sig" target=3D"_blank"><img
src=3D"https://www=2Eredhat=2Ecom/profi=
les/rh/themes/redhatdotcom/img/logo-red-hat-black=2Epng" width=3D"90"
heigh=
t=3D"auto" /></a></td><td
style=3D"font-size:10px"><div><a href=3D"https://=
redhat=2Ecom/trusted" style=3D"color:rgb(204,0,0);font-weight:bold"
target=
=3D"_blank">TRIED=2E TESTED=2E
TRUSTED=2E</a></div></td></tr></tbody></tabl=
e><br
/></div></div></div></div></div></div></div></div></div></div></div><=
/div></div>
</div></div>
</blockquote></div></body></html>
------V9SJVW1V1NICNHFJD5OIS7KTISNRVZ--
10:43 a.m.
2017-12-15 16:37 GMT+01:00 Jarosław Augustynowicz <jaru(a)jaru.eu.org>:
It can be good idea:
2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms
with pcs and drbd for arbiter.
Just be sure to not run the kvm vms arbiters on the same real hosts or it
may become a mess.
I'll test it.
Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <sbonazzo(a)redhat.com>
napisał(a):
>
>
>
> 2017-12-15 12:53 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
>
>> Yes, I checked it but it seems I still need three nodes - 2 for storage
>> and one smaller for arbiter.
>> Is it safe to deploy it only on two nodes?
>>
>
> the host arbiter can be even just a Raspberry PI as far as I can tell.
> Adding Sahina.
>
>
>
>> Am I wrong?
>>
>> ------------------------------
>> *From: *"Sandro Bonazzola" <sbonazzo(a)redhat.com>
>> *To: *"Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>
>> *Cc: *"users" <users(a)ovirt.org>
>> *Sent: *Friday, December 15, 2017 12:03:24 PM
>> *Subject: *Re: [ovirt-users] Two node configuration.
>>
>>
>>
>> 2017-12-15 8:55 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
>>
>>> Hello, currently I'm using kvms with pcs&drbd on vms... is there any
>>> ovirt solution for ha with two nodes (storage on local disks) without
pcs&
>>> drbd for storage? I know about gluster storage but it needs third host;/
>>>
>>
>> Did you check https://access.redhat.com/documentation/en-us/red_hat_
>> gluster_storage/3.3/html/administration_guide/creating_arbit
>> rated_replicated_volumes ?
>>
>>
>>
>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>>
>> --
>>
>> SANDRO BONAZZOLA
>>
>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>>
>> Red Hat EMEA <https://www.redhat.com/>
>> <https://red.ht/sig>
>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>
>>
>>
>
>
> --
>
> SANDRO BONAZZOLA
>
> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>
> Red Hat EMEA <https://www.redhat.com/>
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
>
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
10:44 a.m.
------XLJVOXVAINNT81XRF57OTQ78GO4I69
Content-Type: text/plain;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
Yes, sure :)=20
Dnia 15 grudnia 2017 16:43:10 CET, Sandro Bonazzola <sbonazzo@redhat=2Ecom=
napisa=C5=82(a):
2017-12-15 16:37 GMT+01:00 Jaros=C5=82aw Augustynowicz <jaru@jaru=2Eeu=2E=
org>:
> It can be good idea:
> 2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm
vms
> with pcs and drbd for arbiter=2E
>
Just be sure to not run the kvm vms arbiters on the same real hosts or
it
may become a mess=2E
> I'll test it=2E
>
> Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola
<sbonazzo@redhat=2Ecom>
> napisa=C5=82(a):
>>
>>
>>
>> 2017-12-15 12:53 GMT+01:00 Jarek <jaru@jaru=2Eeu=2Eorg>:
>>
>>> Yes, I checked it but it seems I still need three nodes - 2 for
storage
>>> and one smaller for arbiter=2E
>>> Is it safe to deploy it only on two nodes?
>>>
>>
>> the host arbiter can be even just a Raspberry PI as far as I can
tell=2E
>> Adding Sahina=2E
>>
>>
>>
>>> Am I wrong?
>>>
>>> ------------------------------
>>> *From: *"Sandro Bonazzola" <sbonazzo@redhat=2Ecom>
>>> *To: *"Jaroslaw Augustynowicz" <jaru@jaru=2Eeu=2Eorg>
>>> *Cc: *"users" <users@ovirt=2Eorg>
>>> *Sent: *Friday, December 15, 2017 12:03:24 PM
>>> *Subject: *Re: [ovirt-users] Two node configuration=2E
>>>
>>>
>>>
>>> 2017-12-15 8:55 GMT+01:00 Jarek <jaru@jaru=2Eeu=2Eorg>:
>>>
>>>> Hello, currently I'm using kvms with pcs&drbd on vms=2E=2E=2E is
the=
re
any
>>>> ovirt solution for ha with two nodes (storage on local disks)
without pcs&
>>>> drbd for storage? I know about gluster storage but it needs third
host;/
>>>>
>>>
>>> Did you check
https://access=2Eredhat=2Ecom/documentation/en-us/red_hat_
>>> gluster_storage/3=2E3/html/administration_guide/creating_arbit
>>> rated_replicated_volumes ?
>>>
>>>
>>>
>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users@ovirt=2Eorg
>>>> http://lists=2Eovirt=2Eorg/mailman/listinfo/users
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>> SANDRO BONAZZOLA
>>>
>>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION
R&D
>>>
>>> Red Hat EMEA <https://www=2Eredhat=2Ecom/>
>>> <https://red=2Eht/sig>
>>> TRIED=2E TESTED=2E TRUSTED=2E <https://redhat=2Ecom/trusted>
>>>
>>>
>>>
>>
>>
>> --
>>
>> SANDRO BONAZZOLA
>>
>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>>
>> Red Hat EMEA <https://www=2Eredhat=2Ecom/>
>> <https://red=2Eht/sig>
>> TRIED=2E TESTED=2E TRUSTED=2E <https://redhat=2Ecom/trusted>
>>
>>
--=20
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www=2Eredhat=2Ecom/>
<https://red=2Eht/sig>
TRIED=2E TESTED=2E TRUSTED=2E <https://redhat=2Ecom/trusted>
------XLJVOXVAINNT81XRF57OTQ78GO4I69
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head></head><body>Yes, sure :) <br><br><div
class=3D"gmail_quote">Dn=
ia 15 grudnia 2017 16:43:10 CET, Sandro Bonazzola <sbonazzo@redhat=2Ecom=
> napisa=C5=82(a):<blockquote class=3D"gmail_quote"
style=3D"margin: 0pt=
0pt 0pt 0=2E8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: =
1ex;">
<div dir=3D"ltr"><br /><div
class=3D"gmail_extra"><br /><div class=3D"gmai=
l_quote">2017-12-15 16:37 GMT+01:00 Jaros=C5=82aw Augustynowicz <span dir=
=3D"ltr"><<a href=3D"mailto:jaru@jaru=2Eeu=2Eorg"
target=3D"_blank">jaru=
@jaru=2Eeu=2Eorg</a>></span>:<br /><blockquote
class=3D"gmail_quote" sty=
le=3D"margin:0 0 0 =2E8ex;border-left:1px #ccc
solid;padding-left:1ex"><div=
It can be good idea:<br />
2 physical nodes with local
disks (raid6) as gluster bricks + 2 kvm vms wi=
th pcs and drbd for arbiter=2E<br /></div></blockquote><div><br
/></div><di=
v>Just be sure to not run the kvm vms arbiters on the same real hosts or it=
may become a mess=2E</div><div> </div><blockquote
class=3D"gmail_quot=
e" style=3D"margin:0 0 0 =2E8ex;border-left:1px #ccc solid;padding-left:1ex=
"><div>
I'll test it=2E <br /><div><div class=3D"h5"><br
/><div class=3D"gmail_quo=
te">Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <<a
href=3D"mail=
to:sbonazzo@redhat=2Ecom"
target=3D"_blank">sbonazzo@redhat=2Ecom</a>> n=
apisa=C5=82(a):<blockquote class=3D"gmail_quote" style=3D"margin:0pt 0pt
0p=
t 0=2E8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"ltr"><br /><div
class=3D"gmail_extra"><br /><div class=3D"gmai=
l_quote">2017-12-15 12:53 GMT+01:00 Jarek <span
dir=3D"ltr"><<a href=3D"=
mailto:jaru@jaru=2Eeu=2Eorg"
target=3D"_blank">jaru@jaru=2Eeu=2Eorg</a>>=
</span>:<br /><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 0 =2E8e=
x;border-left:1px #ccc solid;padding-left:1ex"><div><div
style=3D"font-fami=
ly:arial,helvetica,sans-serif;font-size:12pt;color:#000000"><div>Yes, I
che=
cked it but it seems I still need three nodes - 2 for storage and one small=
er for arbiter=2E<br /></div><div>Is it safe to deploy it only on two
nodes=
?<br /></div></div></div></blockquote><div><br
/></div><div>the host arbite=
r can be even just a Raspberry PI as far as I can tell=2E</div><div>Adding =
Sahina=2E</div><div><br
/></div><div> </div><blockquote class=3D"gmail=
_quote" style=3D"margin:0 0 0 =2E8ex;border-left:1px #ccc solid;padding-lef=
t:1ex"><div><div
style=3D"font-family:arial,helvetica,sans-serif;font-size:=
12pt;color:#000000"><div></div><div>Am I wrong?<br
/></div><div><br /></div=
<hr
id=3D"m_5656871801167454730m_7739355658544100534zwchr"
/><div><b>From:=
</b>"Sandro Bonazzola"
<<a href=3D"mailto:sbonazzo@redhat=2Ec=
om" target=3D"_blank">sbonazzo@redhat=2Ecom</a>><br
/><b>To: </b>"J=
aroslaw Augustynowicz" <<a
href=3D"mailto:jaru@jaru=2Eeu=2Eorg" tar=
get=3D"_blank">jaru@jaru=2Eeu=2Eorg</a>><br /><b>Cc:
</b>"users&quo=
t; <<a href=3D"mailto:users@ovirt=2Eorg"
target=3D"_blank">users@ovirt=
=2Eorg</a>><br /><b>Sent: </b>Friday, December 15, 2017
12:03:24 PM<br /=
<b>Subject: </b>Re: [ovirt-users] Two node
configuration=2E<br /></div><di=
v><div
class=3D"m_5656871801167454730h5"><br /><div><div
dir=3D"ltr"><br />=
<div class=3D"gmail_extra"><br /><div
class=3D"gmail_quote">2017-12-15 8:55=
GMT+01:00 Jarek <span dir=3D"ltr"><<a
href=3D"mailto:jaru@jaru=2Eeu=2Eo=
rg"
target=3D"_blank">jaru@jaru=2Eeu=2Eorg</a>></span>:<br
/><blockquote=
class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0=2E8ex;border-left:1px
=
solid rgb(204,204,204);padding-left:1ex"><div><div
style=3D"font-family:ari=
al,helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)"><div> Hello,
curre=
ntly I'm using kvms with pcs&drbd on vms=2E=2E=2E is there any ovirt so=
lution for ha with two nodes (storage on local disks) without pcs& drbd=
for storage? I know about gluster storage but it needs third host;/</div><=
/div></div></blockquote><br /><div>Did you check <a
href=3D"https://ac=
cess=2Eredhat=2Ecom/documentation/en-us/red_hat_gluster_storage/3=2E3/html/=
administration_guide/creating_arbitrated_replicated_volumes" target=3D"_bla=
nk">https://access=2Eredhat=2Eco<wbr />m/documentation/en-us/red_hat_<wbr
/=
gluster_storage/3=2E3/html/admin<wbr
/>istration_guide/creating_arbit<wbr =
/>rated_replicated_volumes</a>
?</div><br /><br /><div> </div><blockqu=
ote class=3D"gmail_quote" style=3D"margin:0px 0px 0px
0=2E8ex;border-left:1=
px solid rgb(204,204,204);padding-left:1ex"><div><div
style=3D"font-family:=
arial,helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)"><div>
</div></d=
iv></div><br />______________________________<wbr
/>_________________<br />
Users mailing list<br />
<a href=3D"mailto:Users@ovirt=2Eorg"
target=3D"_blank">Users@ovirt=2Eorg</=
a><br />
<a href=3D"http://lists=2Eovirt=2Eorg/mailman/listinfo/users"
rel=3D"noref=
errer" target=3D"_blank">http://lists=2Eovirt=2Eorg/mailman<wbr
/>/listinfo=
/users</a><br />
<br /></blockquote></div><br /><br clear=3D"all"
/><br />-- <br /><div cla=
ss=3D"m_5656871801167454730m_7739355658544100534gmail_signature"><div
dir=
=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr">=
<div><div dir=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"><p=
style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-weight:bold=
;margin:0px;padding:0px;font-size:14px;text-transform:uppercase"><span>SAND=
RO</span> <span>BONAZZOLA</span></p><p
style=3D"color:rgb(0,0,0);font-=
family:overpass,sans-serif;font-size:10px;margin:0px 0px 4px;text-transform=
:uppercase"><span>ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG
VIRTUAL=
IZATION R&D</span></p><p
style=3D"font-family:overpass,sans-serif;margi=
n:0px;font-size:10px;color:rgb(153,153,153)"><a
href=3D"https://www=2Eredha=
t=2Ecom/" style=3D"color:rgb(0,136,206);margin:0px"
target=3D"_blank">Red H=
at <span>EMEA</span></a><br /></p><table
style=3D"color:rgb(0,0,0);fon=
t-family:overpass,sans-serif;font-size:medium"
border=3D"0"><tbody><tr><td =
width=3D"100px"><a href=3D"https://red=2Eht/sig"
target=3D"_blank"><img wid=
th=3D"90" height=3D"auto" /></a><br /></td><td
style=3D"font-size:10px"><di=
v><a href=3D"https://redhat=2Ecom/trusted"
style=3D"color:rgb(204,0,0);font=
-weight:bold" target=3D"_blank">TRIED=2E TESTED=2E
TRUSTED=2E</a><br /></di=
v></td></tr></tbody></table><br
/></div></div></div></div></div></div></div=
</div></div></div></div></div></div>
</div></div><br
/></div></div></div></div></div></blockquote></div><br
/><=
br clear=3D"all" /><div><br /></div>-- <br /><div
class=3D"m_56568718011674=
54730gmail_signature" data-smartmail=3D"gmail_signature"><div
dir=3D"ltr"><=
div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><div><div =
dir=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"><p style=3D"=
color:rgb(0,0,0);font-family:overpass,sans-serif;font-weight:bold;margin:0p=
x;padding:0px;font-size:14px;text-transform:uppercase"><span>SANDRO</span>&=
nbsp;<span>BONAZZOLA</span></p><p
style=3D"color:rgb(0,0,0);font-family:ove=
rpass,sans-serif;font-size:10px;margin:0px 0px 4px;text-transform:uppercase=
"><span>ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION
R&=
amp;D</span></p><p
style=3D"font-family:overpass,sans-serif;margin:0px;font=
-size:10px;color:rgb(153,153,153)"><a
href=3D"https://www=2Eredhat=2Ecom/" =
style=3D"color:rgb(0,136,206);margin:0px" target=3D"_blank">Red
Hat <s=
pan>EMEA</span></a></p><table border=3D"0"
style=3D"color:rgb(0,0,0);font-f=
amily:overpass,sans-serif;font-size:medium"><tbody><tr><td
width=3D"100px">=
<a href=3D"https://red=2Eht/sig" target=3D"_blank"><img
width=3D"90" height=
=3D"auto" /></a></td><td
style=3D"font-size:10px"><div><a href=3D"https://r=
edhat=2Ecom/trusted" style=3D"color:rgb(204,0,0);font-weight:bold" target=
=3D"_blank">TRIED=2E TESTED=2E
TRUSTED=2E</a></div></td></tr></tbody></tabl=
e><br
/></div></div></div></div></div></div></div></div></div></div></div><=
/div></div>
</div></div>
</blockquote></div></div></div></div></blockquote></div><br
/><br clear=3D=
"all" /><div><br /></div>-- <br /><div
class=3D"gmail_signature" data-smart=
mail=3D"gmail_signature"><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div d=
ir=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div dir=3D"ltr"><di=
v dir=3D"ltr"><div dir=3D"ltr"><p
style=3D"color:rgb(0,0,0);font-family:ove=
rpass,sans-serif;font-weight:bold;margin:0px;padding:0px;font-size:14px;tex=
t-transform:uppercase"><span>SANDRO</span> <span>BONAZZOLA</span></p><=
p style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:10px;=
margin:0px 0px 4px;text-transform:uppercase"><span>ASSOCIATE MANAGER,
SOFTW=
ARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D</span></p><p
style=3D"font=
-family:overpass,sans-serif;margin:0px;font-size:10px;color:rgb(153,153,153=
)"><a href=3D"https://www=2Eredhat=2Ecom/"
style=3D"color:rgb(0,136,206);ma=
rgin:0px" target=3D"_blank">Red
Hat <span>EMEA</span></a></p><table bo=
rder=3D"0"
style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-s=
ize:medium"><tbody><tr><td width=3D"100px"><a
href=3D"https://red=2Eht/sig"=
target=3D"_blank"><img
src=3D"https://www=2Eredhat=2Ecom/profiles/rh/theme=
s/redhatdotcom/img/logo-red-hat-black=2Epng" width=3D"90"
height=3D"auto" /=
</a></td><td
style=3D"font-size:10px"><div><a href=3D"https://redhat=2Ecom=
/trusted" style=3D"color:rgb(204,0,0);font-weight:bold"
target=3D"_blank">T=
RIED=2E TESTED=2E
TRUSTED=2E</a></div></td></tr></tbody></table><br
/></div=
></div></div></div></div></div></div</div></div></div></div></div></div>
</div></div>
</blockquote></div></body></html>
------XLJVOXVAINNT81XRF57OTQ78GO4I69--
3:59 a.m.
--=_e94912ce-faef-4238-b68c-2345be41fffd
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
One thing:=20
I have two nodes with sda3 partitions for gluster deploy and one node with =
for example vdd (arbiter).=20
How can I play with gdeploy config to change device name for arbiter node (=
without udevs)?=20
From: "Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>=20
To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>=20
Cc: "users" <users(a)ovirt.org>=20
Sent: Friday, December 15, 2017 4:44:50 PM=20
Subject: Re: [ovirt-users] Two node configuration.=20
Yes, sure :)=20
Dnia 15 grudnia 2017 16:43:10 CET, Sandro Bonazzola <sbonazzo(a)redhat.com> n=
apisa=C5=82(a):=20
2017-12-15 16:37 GMT+01:00 Jaros=C5=82aw Augustynowicz < [ mailto:jaru@jaru=
.eu.org | jaru(a)jaru.eu.org ] > :=20
BQ_BEGIN
It can be good idea:=20
2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms wit=
h pcs and drbd for arbiter.=20
Just be sure to not run the kvm vms arbiters on the same real hosts or it m=
ay become a mess.=20
BQ_BEGIN
I'll test it.=20
Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola < [ mailto:sbonazzo@red=
hat.com | sbonazzo(a)redhat.com ] > napisa=C5=82(a):=20
BQ_BEGIN
2017-12-15 12:53 GMT+01:00 Jarek < [ mailto:jaru@jaru.eu.org | jaru(a)jaru.eu=
.org ] > :=20
BQ_BEGIN
Yes, I checked it but it seems I still need three nodes - 2 for storage and=
one smaller for arbiter.=20
Is it safe to deploy it only on two nodes?=20
BQ_END
the host arbiter can be even just a Raspberry PI as far as I can tell.=20
Adding Sahina.=20
BQ_BEGIN
Am I wrong?=20
From: "Sandro Bonazzola" < [ mailto:sbonazzo@redhat.com | sbonazzo(a)redhat.c=
om ] >=20
To: "Jaroslaw Augustynowicz" < [ mailto:jaru@jaru.eu.org | jaru(a)jaru.eu.org=
] >=20
Cc: "users" < [ mailto:users@ovirt.org | users(a)ovirt.org ] >=20
Sent: Friday, December 15, 2017 12:03:24 PM=20
Subject: Re: [ovirt-users] Two node configuration.=20
2017-12-15 8:55 GMT+01:00 Jarek < [ mailto:jaru@jaru.eu.org | jaru(a)jaru.eu.=
org ] > :=20
BQ_BEGIN
Hello, currently I'm using kvms with pcs&drbd on vms... is there any ovirt =
solution for ha with two nodes (storage on local disks) without pcs& drbd f=
or storage? I know about gluster storage but it needs third host;/=20
BQ_END
Did you check [ https://access.redhat.com/documentation/en-us/red_hat_glust=
er_storage/3.3/html/administration_guide/creating_arbitrated_replicated_vol=
umes | https://access.redhat.com/documentation/en-us/red_hat_gluster_storag=
e/3.3/html/administration_guide/creating_arbitrated_replicated_volumes ] ?=
=20
BQ_BEGIN
_______________________________________________=20
Users mailing list=20
[ mailto:Users@ovirt.org | Users(a)ovirt.org ]=20
[ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/ma=
ilman/listinfo/users ]=20
BQ_END
--=20
SANDRO BONAZZOLA=20
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D=20
[ https://www.redhat.com/ | Red Hat=C2=A0EMEA ]=20
[ https://red.ht/sig ]=20
=09
[ https://redhat.com/trusted | TRIED. TESTED. TRUSTED. ]=20
BQ_END
--=20
SANDRO BONAZZOLA=20
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D=20
[ https://www.redhat.com/ | Red Hat=C2=A0EMEA ]=20
[ https://red.ht/sig ]=20
=09
[ https://redhat.com/trusted | TRIED. TESTED. TRUSTED. ]=20
BQ_END
BQ_END
--=20
SANDRO BONAZZOLA=20
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D=20
[ https://www.redhat.com/ | Red Hat=C2=A0EMEA ]=20
[ https://red.ht/sig ]=20
=09
[ https://redhat.com/trusted | TRIED. TESTED. TRUSTED. ]=20
BQ_END
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
--=_e94912ce-faef-4238-b68c-2345be41fffd
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: arial, helvetica, sans-serif;
font-s=
ize: 12pt; color: #000000"><div>One
thing:<br></div><div><br data-mce-bogus=
=3D"1"></div><div>I have two nodes with sda3 partitions for
gluster deploy =
and one node with for example vdd (arbiter).<br
data-mce-bogus=3D"1"></div>=
<div>How can I play with gdeploy config to change device name for arbiter n=
ode (without udevs)?<br></div><hr id=3D"zwchr"
data-marker=3D"__DIVIDER__">=
<div data-marker=3D"__HEADERS__"><b>From: </b>"Jaroslaw
Augustynowicz" <=
jaru(a)jaru.eu.org&gt;<br><b>To: </b>"Sandro Bonazzola"
&lt;sbonazzo(a)redhat.c=
om><br><b>Cc: </b>"users"
&lt;users(a)ovirt.org&gt;<br><b>Sent: </b>Friday=
, December 15, 2017 4:44:50 PM<br><b>Subject: </b>Re: [ovirt-users] Two
nod=
e configuration.<br></div><br><div
data-marker=3D"__QUOTED_TEXT__">Yes, sur=
e :) <br><br><div class=3D"gmail_quote">Dnia 15 grudnia 2017
16:43:10 CET, =
Sandro Bonazzola &lt;sbonazzo(a)redhat.com&gt; napisa=C5=82(a):<blockquote cl=
ass=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt 0.8ex; border-left: 1px
so=
lid rgb(204, 204, 204); padding-left: 1ex;" <div
dir=3D"ltr"><br><div
class=3D"gmail_extra"><br><div class=3D"gmail_quo=
te">2017-12-15 16:37 GMT+01:00 Jaros=C5=82aw Augustynowicz <span
dir=3D"ltr=
"><<a href=3D"mailto:jaru@jaru.eu.org"
target=3D"_blank">jaru(a)jaru.eu.or=
g</a>></span>:<br><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 =
0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>It can be good
ide=
a:<br 2 physical nodes with local disks
(raid6) as gluster bricks + 2 kvm vms wit=
h pcs and drbd for
arbiter.<br></div></blockquote><br><div>Just be sure to =
not run the kvm vms arbiters on the same real hosts or it may become a mess=
.</div><div> </div><blockquote
class=3D"gmail_quote" style=3D"margin:0=
0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div I'll test it. <br><div><div
class=3D"h5"><br><div class=3D"gmail_quote">Dni=
a 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <<a href=3D"mailto:sbon=
azzo(a)redhat.com" target=3D"_blank">sbonazzo(a)redhat.com</a>&gt;
napisa=C5=82=
(a):<blockquote class=3D"gmail_quote" style=3D"margin:0pt 0pt 0pt
0.8ex;bor=
der-left:1px solid rgb(204,204,204);padding-left:1ex" <div
dir=3D"ltr"><br><div
class=3D"gmail_extra"><br><div class=3D"gmail_quo=
te">2017-12-15 12:53 GMT+01:00 Jarek <span
dir=3D"ltr"><<a href=3D"mailt=
o:jaru@jaru.eu.org"
target=3D"_blank">jaru@jaru.eu.org</a>></span>:<br><=
blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1px=
#ccc solid;padding-left:1ex"><div><div
style=3D"font-family:arial,helvetic=
a,sans-serif;font-size:12pt;color:#000000"><div>Yes, I checked it but it
se=
ems I still need three nodes - 2 for storage and one smaller for arbiter.<b=
r></div><div>Is it safe to deploy it only on two
nodes?<br></div></div></di=
v></blockquote><br><div>the host arbiter can be even just a Raspberry
PI as=
far as I can tell.</div><div>Adding
Sahina.</div><br><div> </div><blo=
ckquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px
#c=
cc solid;padding-left:1ex"><div><div
style=3D"font-family:arial,helvetica,s=
ans-serif;font-size:12pt;color:#000000"><div>Am I
wrong?<br></div><br><hr i=
d=3D"m_5656871801167454730m_7739355658544100534zwchr"><div><b>From:
</b>"Sa=
ndro Bonazzola" <<a href=3D"mailto:sbonazzo@redhat.com"
target=3D"_blank=
">sbonazzo(a)redhat.com</a>&gt;<br><b>To:
</b>"Jaroslaw Augustynowicz" <<a=
href=3D"mailto:jaru@jaru.eu.org"
target=3D"_blank">jaru(a)jaru.eu.org</a>&gt=
;<br><b>Cc: </b>"users" <<a
href=3D"mailto:users@ovirt.org" target=3D"_b=
lank">users(a)ovirt.org</a>&gt;<br><b>Sent: </b>Friday,
December 15, 2017 12:=
03:24 PM<br><b>Subject: </b>Re: [ovirt-users] Two node
configuration.<br></=
div><div><div
class=3D"m_5656871801167454730h5"><br><div><div
dir=3D"ltr"><=
br><div class=3D"gmail_extra"><br><div
class=3D"gmail_quote">2017-12-15 8:5=
5 GMT+01:00 Jarek <span dir=3D"ltr"><<a
href=3D"mailto:jaru@jaru.eu.org"=
target=3D"_blank">jaru@jaru.eu.org</a>></span>:<br><blockquote
class=3D=
"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid
rgb(2=
04,204,204);padding-left:1ex"><div><div
style=3D"font-family:arial,helvetic=
a,sans-serif;font-size:12pt;color:rgb(0,0,0)"><div> Hello, currently I'm
us=
ing kvms with pcs&drbd on vms... is there any ovirt solution for ha wit=
h two nodes (storage on local disks) without pcs& drbd for storage? I k=
now about gluster storage but it needs third
host;/</div></div></div></bloc=
kquote><br><div>Did you check <a
href=3D"https://access.redhat.com/doc=
umentation/en-us/red_hat_gluster_storage/3.3/html/administration_guide/crea=
ting_arbitrated_replicated_volumes"
target=3D"_blank">https://access.redhat=
.com/documentation/en-us/red_hat_gluster_storage/3.3/html/administration_gu=
ide/creating_arbitrated_replicated_volumes</a>
?</div><br><br><div> </=
div><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px
0.8ex;bor=
der-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div
style=3D"fo=
nt-family:arial,helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)"><div>=
</div></div></div><br>_______________________________________________<br Users mailing list<br <a
href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users(a)ovirt.org</a><br=
<a
href=3D"http://lists.ovirt.org/mailman/listinfo/users" rel=3D"noreferrer=
"
target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/us... <br></blockquote></div><br><br
clear=3D"all"><br>-- <br><div class=3D"m_565=
6871801167454730m_7739355658544100534gmail_signature"><div
dir=3D"ltr"><div=
</div></div><br></div></div></div></div></div></blockquote></div><br><br
cl=
ear=3D"all"><br>-- <br><div
class=3D"m_5656871801167454730gmail_signature">=
<div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=
=3D"ltr"><div><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"><div dir=
=3D"ltr"><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-=
weight:bold;margin:0px;padding:0px;font-size:14px;text-transform:uppercase"=
</div></div
</blockquote></div></div></div></div></blockquote></div><br><br
clear=3D"al=
l"><br>-- <br><div class=3D"gmail_signature"><div
dir=3D"ltr"><div><div dir=
=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr">=
<div dir=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><p style=3D"color:rgb(0,=
0,0);font-family:overpass,sans-serif;font-weight:bold;margin:0px;padding:0p=
x;font-size:14px;text-transform:uppercase"><span>SANDRO</span> <span>B=
ONAZZOLA</span></p><p
style=3D"color:rgb(0,0,0);font-family:overpass,sans-s=
erif;font-size:10px;margin:0px 0px
4px;text-transform:uppercase"><span>ASSO=
CIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D</span>=
</p><p
style=3D"font-family:overpass,sans-serif;margin:0px;font-size:10px;c=
olor:rgb(153,153,153)"><a href=3D"https://www.redhat.com/"
style=3D"color:r=
gb(0,136,206);margin:0px" target=3D"_blank">Red
Hat <span>EMEA</span><=
/a><br data-mce-bogus=3D"1"></p><table
style=3D"color:rgb(0,0,0);font-famil=
y:overpass,sans-serif;font-size:medium"
border=3D"0"><tbody><tr><td width=
=3D"100px"><a href=3D"https://red.ht/sig"
target=3D"_blank"><img src=3D"htt=
ps://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.=
png" width=3D"90" height=3D"auto"></a><br
data-mce-bogus=3D"1"></td><td sty=
le=3D"font-size:10px"><div><a
href=3D"https://redhat.com/trusted" style=3D"=
color:rgb(204,0,0);font-weight:bold" target=3D"_blank">TRIED. TESTED.
TRUST=
ED.</a><br
data-mce-bogus=3D"1"></div></td></tr></tbody></table><br></div><=
/div></div></div></div></div></div></div></div></div></div></div></div </div></div
</blockquote></div><br>_______________________________________________<br>U=
sers mailing list<br>Users@ovirt.org<br>http://lists.ovirt.org/mailman/list=
info/users<br></div></div></body></html --=_e94912ce-faef-4238-b68c-2345be41fffd--
<div dir=3D"ltr"><div><div
dir=3D"ltr"><div><div dir=3D"ltr"><div><div
dir=
=3D"ltr"><div dir=3D"ltr"><div
dir=3D"ltr"><div dir=3D"ltr"><p style=3D"col=
or:rgb(0,0,0);font-family:overpass,sans-serif;font-weight:bold;margin:0px;p=
adding:0px;font-size:14px;text-transform:uppercase"><span>SANDRO</span>&nbs=
p;<span>BONAZZOLA</span></p><p
style=3D"color:rgb(0,0,0);font-family:overpa=
ss,sans-serif;font-size:10px;margin:0px 0px 4px;text-transform:uppercase"><=
span>ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&=
;D</span></p><p
style=3D"font-family:overpass,sans-serif;margin:0px;font-si=
ze:10px;color:rgb(153,153,153)"><a href=3D"https://www.redhat.com/"
style=
=3D"color:rgb(0,136,206);margin:0px" target=3D"_blank">Red
Hat <span>E=
MEA</span></a><br></p><table
style=3D"color:rgb(0,0,0);font-family:overpass=
,sans-serif;font-size:medium" border=3D"0"><tbody><tr><td
width=3D"100px"><=
a href=3D"https://red.ht/sig" target=3D"_blank"><img
width=3D"90" height=3D=
"auto"></a><br></td><td
style=3D"font-size:10px"><div><a href=3D"https://re=
dhat.com/trusted" style=3D"color:rgb(204,0,0);font-weight:bold"
target=3D"_=
blank">TRIED. TESTED.
TRUSTED.</a><br></div></td></tr></tbody></table><br><=
/div></div></div></div></div></div></div></div></div></div></div></div></di=
v<span>SANDRO</span> <span>BONAZZOLA</span></p><p
style=3D"color:rgb(0=
,0,0);font-family:overpass,sans-serif;font-size:10px;margin:0px 0px 4px;tex=
t-transform:uppercase"><span>ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA
=
ENG VIRTUALIZATION R&D</span></p><p
style=3D"font-family:overpass,sans-=
serif;margin:0px;font-size:10px;color:rgb(153,153,153)"><a
href=3D"https://=
www.redhat.com/" style=3D"color:rgb(0,136,206);margin:0px"
target=3D"_blank=
">Red Hat <span>EMEA</span></a><br
data-mce-bogus=3D"1"></p><table sty=
le=3D"color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:medium" bo=
rder=3D"0"><tbody><tr><td width=3D"100px"><a
href=3D"https://red.ht/sig" ta=
rget=3D"_blank"><img width=3D"90"
height=3D"auto"></a><br data-mce-bogus=3D=
"1"></td><td style=3D"font-size:10px"><div><a
href=3D"https://redhat.com/tr=
usted" style=3D"color:rgb(204,0,0);font-weight:bold"
target=3D"_blank">TRIE=
D. TESTED. TRUSTED.</a><br
data-mce-bogus=3D"1"></div></td></tr></tbody></t=
able><br></div></div></div></div></div></div></div></div></div></div></div>=
</div></div
8:53 a.m.
Hello Jarek,
As of today we cannot have gdeploy to work with different devices
on different nodes for deploying HC. Currently device name has to be same
on data and arbiter nodes.
Hope this helps !!
Thanks
kasturi
On Wed, Dec 20, 2017 at 2:29 PM, Jarek <jaru(a)jaru.eu.org> wrote:
One thing:
I have two nodes with sda3 partitions for gluster deploy and one node with
for example vdd (arbiter).
How can I play with gdeploy config to change device name for arbiter node
(without udevs)?
------------------------------
*From: *"Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>
*To: *"Sandro Bonazzola" <sbonazzo(a)redhat.com>
*Cc: *"users" <users(a)ovirt.org>
*Sent: *Friday, December 15, 2017 4:44:50 PM
*Subject: *Re: [ovirt-users] Two node configuration.
Yes, sure :)
Dnia 15 grudnia 2017 16:43:10 CET, Sandro Bonazzola <sbonazzo(a)redhat.com>
napisał(a):
>
>
>
> 2017-12-15 16:37 GMT+01:00 Jarosław Augustynowicz <jaru(a)jaru.eu.org>:
>
>> It can be good idea:
>> 2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms
>> with pcs and drbd for arbiter.
>>
>
> Just be sure to not run the kvm vms arbiters on the same real hosts or it
> may become a mess.
>
>
>> I'll test it.
>>
>> Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <sbonazzo(a)redhat.com>
>> napisał(a):
>>>
>>>
>>>
>>> 2017-12-15 12:53 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
>>>
>>>> Yes, I checked it but it seems I still need three nodes - 2 for
>>>> storage and one smaller for arbiter.
>>>> Is it safe to deploy it only on two nodes?
>>>>
>>>
>>> the host arbiter can be even just a Raspberry PI as far as I can tell.
>>> Adding Sahina.
>>>
>>>
>>>
>>>> Am I wrong?
>>>>
>>>> ------------------------------
>>>> *From: *"Sandro Bonazzola" <sbonazzo(a)redhat.com>
>>>> *To: *"Jaroslaw Augustynowicz" <jaru(a)jaru.eu.org>
>>>> *Cc: *"users" <users(a)ovirt.org>
>>>> *Sent: *Friday, December 15, 2017 12:03:24 PM
>>>> *Subject: *Re: [ovirt-users] Two node configuration.
>>>>
>>>>
>>>>
>>>> 2017-12-15 8:55 GMT+01:00 Jarek <jaru(a)jaru.eu.org>:
>>>>
>>>>> Hello, currently I'm using kvms with pcs&drbd on vms... is
there any
>>>>> ovirt solution for ha with two nodes (storage on local disks) without
pcs&
>>>>> drbd for storage? I know about gluster storage but it needs third
host;/
>>>>>
>>>>
>>>> Did you check https://access.redhat.com/documentation/en-us/red_
>>>> hat_gluster_storage/3.3/html/administration_guide/creating_
>>>> arbitrated_replicated_volumes ?
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> SANDRO BONAZZOLA
>>>>
>>>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>>>>
>>>> Red Hat EMEA <https://www.redhat.com/>
>>>> <https://red.ht/sig>
>>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>> SANDRO BONAZZOLA
>>>
>>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>>>
>>> Red Hat EMEA <https://www.redhat.com/>
>>> <https://red.ht/sig>
>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>>
>>>
>
>
> --
>
> SANDRO BONAZZOLA
>
> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>
> Red Hat EMEA <https://www.redhat.com/>
> <https://red.ht/sig>
> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2560
days inactive
2565
days old
9 comments
5 participants
participants (5)
-
Jarek -
Jarosław Augustynowicz
-
Johan Bernhardsson -
Kasturi Narra -
Sandro Bonazzola