[Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine. --- Jeff
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy? ----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy?
Sure. Here's the error and some bits around it.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Can you please send the content of /proc/net/vlan? ----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: users@ovirt.org Sent: Saturday, February 16, 2013 2:01:44 AM Subject: Re: [Users] Host deployment on 3.2
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy?
Sure. Here's the error and some bits around it.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On 2/16/2013 2:00 AM, Alon Bar-Lev wrote:
Can you please send the content of /proc/net/vlan?
Here's a "cat /proc/net/vlan/em1_1.538". I attached it instead of pasting so you can get an exact copy with all the white space etc.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: users@ovirt.org Sent: Saturday, February 16, 2013 2:01:44 AM Subject: Re: [Users] Host deployment on 3.2
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy? Sure. Here's the error and some bits around it.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
------=_Part_1333502_643158811.1361004810048 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Thanks! Can you please check if the following fixes the problem? I can provide rpms if you like. ----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 10:29:43 AM Subject: Re: [Users] Host deployment on 3.2
On 2/16/2013 2:00 AM, Alon Bar-Lev wrote:
Can you please send the content of /proc/net/vlan?
Here's a "cat /proc/net/vlan/em1_1.538". I attached it instead of pasting so you can get an exact copy with all the white space etc.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: users@ovirt.org Sent: Saturday, February 16, 2013 2:01:44 AM Subject: Re: [Users] Host deployment on 3.2
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy? Sure. Here's the error and some bits around it.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
------=_Part_1333502_643158811.1361004810048 Content-Type: text/x-patch; name=0001-vdsm-bridge-proc-net-vlan-may-contain-tabs.patch Content-Disposition: attachment; filename=0001-vdsm-bridge-proc-net-vlan-may-contain-tabs.patch Content-Transfer-Encoding: base64 RnJvbSA3YTE2OGZlYjc5NWRmZjMwNGMwZGUyYWE4ZDY5ZjNmZDFmZmEwYzkxIE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiBBbG9uIEJhci1MZXYgPGFsb25ibEByZWRoYXQuY29tPgpEYXRl OiBTYXQsIDE2IEZlYiAyMDEzIDEwOjUxOjUwICswMjAwClN1YmplY3Q6IFtQQVRDSF0gdmRzbTog YnJpZGdlOiAvcHJvYy9uZXQvdmxhbiBtYXkgY29udGFpbiB0YWJzCgpDaGFuZ2UtSWQ6IEkxYWE1 ZjFkMWE4OGU0MTQ0N2VjZDFlYjIxMjFkNGI4MjlmNTg2YjI3ClNpZ25lZC1vZmYtYnk6IEFsb24g QmFyLUxldiA8YWxvbmJsQHJlZGhhdC5jb20+Ci0tLQogc3JjL3BsdWdpbnMvb3ZpcnQtaG9zdC1k ZXBsb3kvdmRzbS9icmlkZ2UucHkgfCAzICsrLQogMSBmaWxlIGNoYW5nZWQsIDIgaW5zZXJ0aW9u cygrKSwgMSBkZWxldGlvbigtKQoKZGlmZiAtLWdpdCBhL3NyYy9wbHVnaW5zL292aXJ0LWhvc3Qt ZGVwbG95L3Zkc20vYnJpZGdlLnB5IGIvc3JjL3BsdWdpbnMvb3ZpcnQtaG9zdC1kZXBsb3kvdmRz bS9icmlkZ2UucHkKaW5kZXggYzAwODM4Yy4uNGIwOTlhZiAxMDA2NDQKLS0tIGEvc3JjL3BsdWdp bnMvb3ZpcnQtaG9zdC1kZXBsb3kvdmRzbS9icmlkZ2UucHkKKysrIGIvc3JjL3BsdWdpbnMvb3Zp cnQtaG9zdC1kZXBsb3kvdmRzbS9icmlkZ2UucHkKQEAgLTEyOCw4ICsxMjgsOSBAQCBjbGFzcyBQ bHVnaW4ocGx1Z2luLlBsdWdpbkJhc2UpOgogICAgIF9SRV9WTEFOX0lEID0gcmUuY29tcGlsZSgK ICAgICAgICAgZmxhZ3M9cmUuVkVSQk9TRSwKICAgICAgICAgcGF0dGVybj1yIiIiCisgICAgICAg ICAgICBeCiAgICAgICAgICAgICAuKgotICAgICAgICAgICAgVklEOiAoWzAtOV0rKQorICAgICAg ICAgICAgXHNWSUQ6XHMoXGQrKVxzCiAgICAgICAgICAgICAuKgogICAgICAgICAgICAgIiIiCiAg ICAgKQotLSAKMS43LjEyLjQKCg== ------=_Part_1333502_643158811.1361004810048--
On 2/16/2013 3:53 AM, Alon Bar-Lev wrote:
Thanks! Can you please check if the following fixes the problem?
Looks like that fixed it. Thanks.
I can provide rpms if you like.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 10:29:43 AM Subject: Re: [Users] Host deployment on 3.2
Can you please send the content of /proc/net/vlan? Here's a "cat /proc/net/vlan/em1_1.538". I attached it instead of
On 2/16/2013 2:00 AM, Alon Bar-Lev wrote: pasting so you can get an exact copy with all the white space etc.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: users@ovirt.org Sent: Saturday, February 16, 2013 2:01:44 AM Subject: Re: [Users] Host deployment on 3.2
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy? Sure. Here's the error and some bits around it.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:29:44 AM Subject: [Users] Host deployment on 3.2
I've hit a couple of small problems deploying an F18 minimal host with 3.2. The first problem was missing tar. Second, I had manually set up a vlan on the host for initial communication and the regular expression in bridge.py of the otopi plugin couldn't determine the vlan id. After tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was fine.
--- Jeff
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
commit 44f16ba2411e29a8bc9f3c14054993e9782f5266 Author: Alon Bar-Lev <alonbl@redhat.com> Date: Sat Feb 16 18:38:03 2013 +0200 vdsm: bridge: cleanup bridge/vlan message Change-Id: Ic8778566a34808ac777510ab1c918c2cf92bae20 Signed-off-by: Alon Bar-Lev <alonbl@redhat.com> commit 780eebe76ed0687311caa7960073e4cd6eadacb4 Author: Alon Bar-Lev <alonbl@redhat.com> Date: Sat Feb 16 11:00:51 2013 +0200 commit 144e888903664c1eb38b97d955e0027e9b8aa1c6 Author: Alon Bar-Lev <alonbl@redhat.com> Date: Sat Feb 16 10:51:50 2013 +0200 vdsm: bridge: /proc/net/vlan may contain tabs Reference-Url: http://lists.ovirt.org/pipermail/users/2013-February/012365.html Reported-By: Jeff Bailey <bailey@cs.kent.edu> Change-Id: I1aa5f1d1a88e41447ecd1eb2121d4b829f586b27 Signed-off-by: Alon Bar-Lev <alonbl@redhat.com> ----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 1:41:17 PM Subject: Re: [Users] Host deployment on 3.2
On 2/16/2013 3:53 AM, Alon Bar-Lev wrote:
Thanks! Can you please check if the following fixes the problem?
Looks like that fixed it. Thanks.
I can provide rpms if you like.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: users@ovirt.org Sent: Saturday, February 16, 2013 10:29:43 AM Subject: Re: [Users] Host deployment on 3.2
Can you please send the content of /proc/net/vlan? Here's a "cat /proc/net/vlan/em1_1.538". I attached it instead of
On 2/16/2013 2:00 AM, Alon Bar-Lev wrote: pasting so you can get an exact copy with all the white space etc.
----- Original Message -----
From: "Jeff Bailey" <bailey@cs.kent.edu> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: users@ovirt.org Sent: Saturday, February 16, 2013 2:01:44 AM Subject: Re: [Users] Host deployment on 3.2
On 2/15/2013 6:42 PM, Alon Bar-Lev wrote:
Can you please provide the relevant log from /var/log/ovirt-engine/host-deploy? Sure. Here's the error and some bits around it.
----- Original Message ----- > From: "Jeff Bailey" <bailey@cs.kent.edu> > To: users@ovirt.org > Sent: Saturday, February 16, 2013 1:29:44 AM > Subject: [Users] Host deployment on 3.2 > > I've hit a couple of small problems deploying an F18 minimal > host > with > 3.2. The first problem was missing tar. Second, I had > manually > set > up > a vlan on the host for initial communication and the regular > expression > in bridge.py of the otopi plugin couldn't determine the vlan > id. > After > tweeking it a bit to make it similar to _RE_VLAN_DEVICE it was > fine. > > --- > Jeff > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (2)
-
Alon Bar-Lev -
Jeff Bailey