Thanks Donny, Tomorrow I'm going to try this. :) 2015-06-30 21:12 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: > That tells me that there is a tagging issue between the host and the > switch. > Untagged traffic flows without issue via the same interface as tagged > traffic. > As a personal best practice I separate access ports(untagged) and trunk > ports (tagged) traffic on different physical ports. > Can you setup a separate phys interface for the tagged traffic, or must > you be able to pass both on the same interface. > On Jun 30, 2015 10:05 PM, "Julián Tete" <danteconrad14(a)gmail.com&gt; wrote: > >> My mgmt network works wonderfully, Virtual Machines created on the mgmt >> even can reach Internet. But my company wants the traffic separated. >> >> Thanks Donny, I'm a RHCSA from Colombia, but I'm learning about oVirt. >> (oVirt is a new thing in my country) >> >> P.S : I want to put VMware in the Trash Can too. ^_ ^ >> >> 2015-06-30 20:59 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: >> >>> There is a special place in my DC for vmware. TrashCan...lol >>> On Jun 30, 2015 9:50 PM, "Julián Tete" <danteconrad14(a)gmail.com&gt; wrote: >>> >>>> I'm going to check it out... but how the host can reach the Gateway >>>> and the Virtual Machine inside doesn't ? >>>> >>>> Donny you are very kind, this the last step to free my DataCenter from >>>> VMware. >>>> >>>> 2015-06-30 20:46 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: >>>> >>>>> Does your switch have an IP on that vlan... I would step things out >>>>> VM>host>switch>rtr >>>>> >>>>> You have already confirmed VM to host. >>>>> >>>>> I'm going to look at your screens again to make sure I didn't miss >>>>> anything >>>>> On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconrad14(a)gmail.com&gt; >>>>> wrote: >>>>> >>>>>> Thanks for the explanation :) >>>>>> >>>>>> I set everything of the VLANs at oVirt, After I put a IP on the >>>>>> Virtual Machine. But the Virtual Machine can't reach the gateway, The host >>>>>> can do. The Virtual Machine only can reach the host. All the machines of >>>>>> the range of net can reach the Virtual Machine. >>>>>> >>>>>> 2015-06-30 20:36 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: >>>>>> >>>>>>> I'm asking if your setting the vlan on the VM or at ovirt. >>>>>>> >>>>>>> More than likely if you are coming from VMware you have the Vlans >>>>>>> set at the hypervisor. This does work in ovirt, I am doing it right now >>>>>>> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconrad14(a)gmail.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> Mmmm I'm new in oVirt :( >>>>>>>> >>>>>>>> VMs Interface is Virtual MachineS Interface or VM Network >>>>>>>> Interface in the host ? >>>>>>>> >>>>>>>> I configured the IP of the VLAN in the host. >>>>>>>> >>>>>>>> I double check: the NIC of the Host has the VLAN assigned. >>>>>>>> >>>>>>>> Can you help me ? >>>>>>>> >>>>>>>> 2015-06-30 20:11 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: >>>>>>>> >>>>>>>>> Are you configuring the vms interface with the vlan or tagging at >>>>>>>>> the host. >>>>>>>>> On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconrad14(a)gmail.com&gt; >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hi Donny >>>>>>>>>> >>>>>>>>>> We have HP Switches (HP 5406zl) and they are configurated on >>>>>>>>>> trunk mode. (VMware is configurated to use that). >>>>>>>>>> >>>>>>>>>> Any suggestion ? >>>>>>>>>> >>>>>>>>>> Thanks for your response. >>>>>>>>>> >>>>>>>>>> :) >>>>>>>>>> >>>>>>>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me&gt;: >>>>>>>>>> >>>>>>>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco >>>>>>>>>>> switches? The tag sticks to the host bridge, but is being stripped off when >>>>>>>>>>> it leaves the host.... Is your switch in access mode or trunk? >>>>>>>>>>> Hi Friends of oVirt >>>>>>>>>>> >>>>>>>>>>> I'm trying to migrate my company from VMware to oVirt. >>>>>>>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) >>>>>>>>>>> The Virtual Machines in these VLANs, can be reached from the >>>>>>>>>>> external IPs from the net range, >>>>>>>>>>> but from the Virtual machines only can ping the Host with the >>>>>>>>>>> Bridge and itself, can't reach the gateway. ¿? >>>>>>>>>>> >>>>>>>>>>> I configured a IP Forwarding in the Host with the virtual >>>>>>>>>>> machine, and nothing changes... >>>>>>>>>>> >>>>>>>>>>> Any idea ? This is the last duty before embrace oVirt in the >>>>>>>>>>> company. >>>>>>>>>>> >>>>>>>>>>> Look to the VLAN 100 configuration (My desired VM Network): >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/7hrog0a2n/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/68b40i1vr/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/lu6mlshgp/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/540o1qc0t/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/4kyg787bt/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/v7ralh7zb/ >>>>>>>>>>> >>>>>>>>>>> http://postimg.org/image/kn903cl03/ >>>>>>>>>>> >>>>>>>>>>> For any idea, thanks in advance >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Users mailing list >>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>> >>>> >>