3:48 p.m.
Hi Friends of oVirt
I'm trying to migrate my company from VMware to oVirt.
In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
The Virtual Machines in these VLANs, can be reached from the external IPs
from the net range,
but from the Virtual machines only can ping the Host with the Bridge and
itself, can't reach the gateway. ¿?
I configured a IP Forwarding in the Host with the virtual machine, and
nothing changes...
Any idea ? This is the last duty before embrace oVirt in the company.
Look to the VLAN 100 configuration (My desired VM Network):
http://postimg.org/image/7hrog0a2n/
http://postimg.org/image/68b40i1vr/
http://postimg.org/image/lu6mlshgp/
http://postimg.org/image/540o1qc0t/
http://postimg.org/image/4kyg787bt/
http://postimg.org/image/v7ralh7zb/
http://postimg.org/image/kn903cl03/
For any idea, thanks in advance
5:51 p.m.
Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag
sticks to the host bridge, but is being stripped off when it leaves the
host.... Is your switch in access mode or trunk?
Hi Friends of oVirt
I'm trying to migrate my company from VMware to oVirt.
In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
The Virtual Machines in these VLANs, can be reached from the external IPs
from the net range,
but from the Virtual machines only can ping the Host with the Bridge and
itself, can't reach the gateway. ¿?
I configured a IP Forwarding in the Host with the virtual machine, and
nothing changes...
Any idea ? This is the last duty before embrace oVirt in the company.
Look to the VLAN 100 configuration (My desired VM Network):
http://postimg.org/image/7hrog0a2n/
http://postimg.org/image/68b40i1vr/
http://postimg.org/image/lu6mlshgp/
http://postimg.org/image/540o1qc0t/
http://postimg.org/image/4kyg787bt/
http://postimg.org/image/v7ralh7zb/
http://postimg.org/image/kn903cl03/
For any idea, thanks in advance
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:28 p.m.
Hi Donny
We have HP Switches (HP 5406zl) and they are configurated on trunk mode.
(VMware is configurated to use that).
Any suggestion ?
Thanks for your response.
:)
2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me>:
Vlans are layer 2, sounds like a tagging problem. Cisco switches? The
tag
sticks to the host bridge, but is being stripped off when it leaves the
host.... Is your switch in access mode or trunk?
Hi Friends of oVirt
I'm trying to migrate my company from VMware to oVirt.
In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
The Virtual Machines in these VLANs, can be reached from the external IPs
from the net range,
but from the Virtual machines only can ping the Host with the Bridge and
itself, can't reach the gateway. ¿?
I configured a IP Forwarding in the Host with the virtual machine, and
nothing changes...
Any idea ? This is the last duty before embrace oVirt in the company.
Look to the VLAN 100 configuration (My desired VM Network):
http://postimg.org/image/7hrog0a2n/
http://postimg.org/image/68b40i1vr/
http://postimg.org/image/lu6mlshgp/
http://postimg.org/image/540o1qc0t/
http://postimg.org/image/4kyg787bt/
http://postimg.org/image/v7ralh7zb/
http://postimg.org/image/kn903cl03/
For any idea, thanks in advance
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
8:11 p.m.
Are you configuring the vms interface with the vlan or tagging at the host.
On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote:
Hi Donny
We have HP Switches (HP 5406zl) and they are configurated on trunk mode.
(VMware is configurated to use that).
Any suggestion ?
Thanks for your response.
:)
2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me>:
> Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag
> sticks to the host bridge, but is being stripped off when it leaves the
> host.... Is your switch in access mode or trunk?
> Hi Friends of oVirt
>
> I'm trying to migrate my company from VMware to oVirt.
> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
> The Virtual Machines in these VLANs, can be reached from the external IPs
> from the net range,
> but from the Virtual machines only can ping the Host with the Bridge and
> itself, can't reach the gateway. ¿?
>
> I configured a IP Forwarding in the Host with the virtual machine, and
> nothing changes...
>
> Any idea ? This is the last duty before embrace oVirt in the company.
>
> Look to the VLAN 100 configuration (My desired VM Network):
>
> http://postimg.org/image/7hrog0a2n/
>
> http://postimg.org/image/68b40i1vr/
>
> http://postimg.org/image/lu6mlshgp/
>
> http://postimg.org/image/540o1qc0t/
>
> http://postimg.org/image/4kyg787bt/
>
> http://postimg.org/image/v7ralh7zb/
>
> http://postimg.org/image/kn903cl03/
>
> For any idea, thanks in advance
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
6:30 a.m.
On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
Hi Friends of oVirt
I'm trying to migrate my company from VMware to oVirt.
We'd like to help you do this!
In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
The Virtual Machines in these VLANs, can be reached from the external IPs
from the net range,
but from the Virtual machines only can ping the Host with the Bridge and
itself, can't reach the gateway. ¿?
I configured a IP Forwarding in the Host with the virtual machine, and
nothing changes...
Any idea ? This is the last duty before embrace oVirt in the company.
Look to the VLAN 100 configuration (My desired VM Network):
http://postimg.org/image/7hrog0a2n/
http://postimg.org/image/68b40i1vr/
http://postimg.org/image/lu6mlshgp/
I must admit that I don't understand your problem yet. When you ping
from inside your guest, where are your packets dropped?
I'd like to point that your "Hosting" network, as most VM networks, is
better off left without an IP address. The benefit of this is better
security (host TCP stack is not accessible from VMs) and less chances of
routing collisions from the host.
So unless you need to use the same network for something other than VM
communication, try to clear its address.
Regards,
Dan.
7:51 a.m.
Hi,
To make it easier to understand what the situation is, it would help to
see your bridging configuration and your interface configration.
Something like:
#> ip addr
And
#> brctl show
Regards
Soeren
On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan Kenigsberg"
<users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
> Hi Friends of oVirt
>
> I'm trying to migrate my company from VMware to oVirt.
We'd like to help you do this!
> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
> The Virtual Machines in these VLANs, can be reached from the external
>IPs
> from the net range,
> but from the Virtual machines only can ping the Host with the Bridge and
> itself, can't reach the gateway. ¿?
>
> I configured a IP Forwarding in the Host with the virtual machine, and
> nothing changes...
>
> Any idea ? This is the last duty before embrace oVirt in the company.
>
> Look to the VLAN 100 configuration (My desired VM Network):
>
> http://postimg.org/image/7hrog0a2n/
>
> http://postimg.org/image/68b40i1vr/
>
> http://postimg.org/image/lu6mlshgp/
I must admit that I don't understand your problem yet. When you ping
from inside your guest, where are your packets dropped?
I'd like to point that your "Hosting" network, as most VM networks, is
better off left without an IP address. The benefit of this is better
security (host TCP stack is not accessible from VMs) and less chances of
routing collisions from the host.
So unless you need to use the same network for something other than VM
communication, try to clear its address.
Regards,
Dan.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:06 p.m.
Hi Friends of oVirt
This the data required:
I have a HP Enclosure with a HP SAN.
I can't change the net settings in the switch because we have VMware
Virtual Machines in production in the same enclosure.
The switch is in Trunk Mode and all the traffic are in Tagged VLAN's with
ID's: 1,50,90,91 and 100.
I can play with 6 blades.
I in the first Blade I installed oVirt in hosted engine mode.
The only S.O is CentOS 7.1
I used inxi to brig the data for you:
My First Host is the only host until now (SPM) is the first data domain
(NFS) and contains the hosted engine machine.
I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
without any VLAN Tagged configuration.
This the data for my first host:
http://pastebin.com/dfC0XTQM
This the data for the Engine:
http://pastebin.com/JdrMSbj0
This the data for the Virtual Machine created in VLAN 50:
S.O : CentOS 7.1
SELinux: Permissive
IP ADDRESS: 192.168.50.8
PREFIX: 27
GATEWAY: 192.168.50.1
Interface: eth0
The Virtual Machine hasn´t any VLAN configuration.
In the 3 S.O, Network Manager is stopped and disabled, connectivity is
managed by the network daemon.
This is the data for the Networking in the admin interface:
http://postimg.org/image/lbypejxrh/
http://postimg.org/image/jtkyhqs8f/
http://postimg.org/image/7dwf1nb9f/
http://postimg.org/image/6i9t75g33/
http://postimg.org/image/sm8e6lecv/
http://postimg.org/image/cvig7rjuv/
http://postimg.org/image/fxcthsrtl/
http://postimg.org/image/o6xjwwvyz/
http://postimg.org/image/pv5ar5v3j/
http://postimg.org/image/dx8br0gq7/
http://postimg.org/image/baixp4b0j/
This the case
With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
Machine can ping myself (192.168.50.8) but I can't reach the gateway, can't
reach the host, can't reach Internet.
Any help is appreciated
Thanks Friends of oVirt
2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net>:
Hi,
To make it easier to understand what the situation is, it would help to
see your bridging configuration and your interface configration.
Something like:
#> ip addr
And
#> brctl show
Regards
Soeren
On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan Kenigsberg"
<users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
>On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>> Hi Friends of oVirt
>>
>> I'm trying to migrate my company from VMware to oVirt.
>
>We'd like to help you do this!
>
>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>> The Virtual Machines in these VLANs, can be reached from the external
>>IPs
>> from the net range,
>> but from the Virtual machines only can ping the Host with the Bridge and
>> itself, can't reach the gateway. ¿?
>>
>> I configured a IP Forwarding in the Host with the virtual machine, and
>> nothing changes...
>>
>> Any idea ? This is the last duty before embrace oVirt in the company.
>>
>> Look to the VLAN 100 configuration (My desired VM Network):
>>
>> http://postimg.org/image/7hrog0a2n/
>>
>> http://postimg.org/image/68b40i1vr/
>>
>> http://postimg.org/image/lu6mlshgp/
>
>I must admit that I don't understand your problem yet. When you ping
>from inside your guest, where are your packets dropped?
>
>I'd like to point that your "Hosting" network, as most VM networks, is
>better off left without an IP address. The benefit of this is better
>security (host TCP stack is not accessible from VMs) and less chances of
>routing collisions from the host.
>
>So unless you need to use the same network for something other than VM
>communication, try to clear its address.
>
>Regards,
>Dan.
>_______________________________________________
>Users mailing list
>Users(a)ovirt.org
>http://lists.ovirt.org/mailman/listinfo/users
10:10 p.m.
This is a multi-part message in MIME format.
--------------000401010805090300040509
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit
I see the tap interface on the ovirtmgmt bridge which is in the
192.168.0.0/24 subnet but your vm has a 192.168.50.0/27 address. I
don't know why it's attached to that bridge though since it looks like
you've placed it on the dmz network. What happens if you change the IP
address in your test vm to something in 192.168.0.0/24 and then ping
your 192.168.0.1 gateway?
On 7/6/2015 1:06 PM, Julián Tete wrote:
Hi Friends of oVirt
This the data required:
I have a HP Enclosure with a HP SAN.
I can't change the net settings in the switch because we have VMware
Virtual Machines in production in the same enclosure.
The switch is in Trunk Mode and all the traffic are in Tagged VLAN's
with ID's: 1,50,90,91 and 100.
I can play with 6 blades.
I in the first Blade I installed oVirt in hosted engine mode.
The only S.O is CentOS 7.1
I used inxi to brig the data for you:
My First Host is the only host until now (SPM) is the first data
domain (NFS) and contains the hosted engine machine.
I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
without any VLAN Tagged configuration.
This the data for my first host:
http://pastebin.com/dfC0XTQM
This the data for the Engine:
http://pastebin.com/JdrMSbj0
This the data for the Virtual Machine created in VLAN 50:
S.O : CentOS 7.1
SELinux: Permissive
IP ADDRESS: 192.168.50.8
PREFIX: 27
GATEWAY: 192.168.50.1
Interface: eth0
The Virtual Machine hasnŽt any VLAN configuration.
In the 3 S.O, Network Manager is stopped and disabled, connectivity is
managed by the network daemon.
This is the data for the Networking in the admin interface:
http://postimg.org/image/lbypejxrh/
http://postimg.org/image/jtkyhqs8f/
http://postimg.org/image/7dwf1nb9f/
http://postimg.org/image/6i9t75g33/
http://postimg.org/image/sm8e6lecv/
http://postimg.org/image/cvig7rjuv/
http://postimg.org/image/fxcthsrtl/
http://postimg.org/image/o6xjwwvyz/
http://postimg.org/image/pv5ar5v3j/
http://postimg.org/image/dx8br0gq7/
http://postimg.org/image/baixp4b0j/
This the case
With No IP in the VLAN, and IP in the Virtual Machine, From the
Virtual Machine can ping myself (192.168.50.8) but I can't reach the
gateway, can't reach the host, can't reach Internet.
Any help is appreciated
Thanks Friends of oVirt
2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net
<mailto:soeren.malchow@mcon.net>>:
Hi,
To make it easier to understand what the situation is, it would
help to
see your bridging configuration and your interface configration.
Something like:
#> ip addr
And
#> brctl show
Regards
Soeren
On 06/07/15 13:30, "users-bounces(a)ovirt.org
<mailto:users-bounces@ovirt.org> on behalf of Dan Kenigsberg"
<users-bounces(a)ovirt.org <mailto:users-bounces@ovirt.org> on
behalf of danken(a)redhat.com <mailto:danken@redhat.com>> wrote:
>On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>> Hi Friends of oVirt
>>
>> I'm trying to migrate my company from VMware to oVirt.
>
>We'd like to help you do this!
>
>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>> The Virtual Machines in these VLANs, can be reached from the
external
>>IPs
>> from the net range,
>> but from the Virtual machines only can ping the Host with the
Bridge and
>> itself, can't reach the gateway. ¿?
>>
>> I configured a IP Forwarding in the Host with the virtual
machine, and
>> nothing changes...
>>
>> Any idea ? This is the last duty before embrace oVirt in the
company.
>>
>> Look to the VLAN 100 configuration (My desired VM Network):
>>
>> http://postimg.org/image/7hrog0a2n/
>>
>> http://postimg.org/image/68b40i1vr/
>>
>> http://postimg.org/image/lu6mlshgp/
>
>I must admit that I don't understand your problem yet. When you ping
>from inside your guest, where are your packets dropped?
>
>I'd like to point that your "Hosting" network, as most VM
networks, is
>better off left without an IP address. The benefit of this is better
>security (host TCP stack is not accessible from VMs) and less
chances of
>routing collisions from the host.
>
>So unless you need to use the same network for something other
than VM
>communication, try to clear its address.
>
>Regards,
>Dan.
>_______________________________________________
>Users mailing list
>Users(a)ovirt.org <mailto:Users@ovirt.org>
>http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--------------000401010805090300040509
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
I see the tap interface on the ovirtmgmt bridge which is in the
192.168.0.0/24 subnet but your vm has a 192.168.50.0/27 address. I
don't know why it's attached to that bridge though since it looks
like you've placed it on the dmz network. What happens if you
change the IP address in your test vm to something in 192.168.0.0/24
and then ping your 192.168.0.1 gateway?<br>
<br>
<div class="moz-cite-prefix">On 7/6/2015 1:06 PM, Julián Tete
wrote:<br>
</div>
<blockquote
cite="mid:CAHEzQNvCvBmzByrbUyoWKQ5HZfh1baaNMOkzaLE3K7eiYgGLFQ@mail.gmail.com"
type="cite">
<div dir="ltr">Hi Friends of oVirt<br>
<br>
This the data required:<br>
<br>
I have a HP Enclosure with a HP SAN.<br>
I can't change the net settings in the switch because we have
VMware Virtual Machines in production in the same enclosure.<br>
The switch is in Trunk Mode and all the traffic are in Tagged
VLAN's with ID's: 1,50,90,91 and 100.<br>
I can play with 6 blades.<br>
I in the first Blade I installed oVirt in hosted engine mode.<br>
The only S.O is CentOS 7.1<br>
<br>
I used inxi to brig the data for you:<br>
<br>
My First Host is the only host until now (SPM) is the first data
domain (NFS) and contains the hosted engine machine.<br>
I installed oVirt with ovirtmgmt in VLAN 1, over the interface
eno1, without any VLAN Tagged configuration.<br>
<br>
This the data for my first host:<br>
<br>
<a moz-do-not-send="true"
href="http://pastebin.com/dfC0XTQM">http://pastebin.com/dfC0...
<br>
This the data for the Engine:<br>
<br>
<a moz-do-not-send="true"
href="http://pastebin.com/JdrMSbj0">http://pastebin.com/JdrM...
<br>
This the data for the Virtual Machine created in VLAN 50:<br>
<br>
S.O : CentOS 7.1<br>
SELinux: Permissive<br>
IP ADDRESS: 192.168.50.8<br>
PREFIX: 27<br>
GATEWAY: 192.168.50.1<br>
Interface: eth0<br>
<br>
The Virtual Machine hasnŽt any VLAN configuration.<br>
<br>
In the 3 S.O, Network Manager is stopped and disabled,
connectivity is managed by the network daemon.<br>
<br>
This is the data for the Networking in the admin interface:<br>
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/lbypejxrh/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/jtkyhqs8f/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/7dwf1nb9f/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/6i9t75g33/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/sm8e6lecv/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/cvig7rjuv/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/fxcthsrtl/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/o6xjwwvyz/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/pv5ar5v3j/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/dx8br0gq7/">http://postimg.or...
<br>
<a moz-do-not-send="true"
href="http://postimg.org/image/baixp4b0j/">http://postimg.or...
<br>
This the case<br>
<br>
With No IP in the VLAN, and IP in the Virtual Machine, From the
Virtual Machine can ping myself (192.168.50.8) but I can't reach
the gateway, can't reach the host, can't reach Internet.<br>
<br>
Any help is appreciated<br>
<br>
Thanks Friends of oVirt<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">2015-07-06 7:51 GMT-05:00 Soeren
Malchow <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:soeren.malchow@mcon.net"
target="_blank">soeren.malchow@mcon.net</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<br>
To make it easier to understand what the situation is, it
would help to<br>
see your bridging configuration and your interface
configration.<br>
<br>
Something like:<br>
<br>
#> ip addr<br>
<br>
And<br>
<br>
#> brctl show<br>
<br>
Regards<br>
Soeren<br>
<br>
On 06/07/15 13:30, "<a moz-do-not-send="true"
href="mailto:users-bounces@ovirt.org">users-bounces@ovirt.org</a>
on behalf of Dan Kenigsberg"<br>
<div class="HOEnZb">
<div class="h5"><<a
moz-do-not-send="true"
href="mailto:users-bounces@ovirt.org">users-bounces@ovirt.org</a>
on behalf of <a moz-do-not-send="true"
href="mailto:danken@redhat.com">danken@redhat.com</a>>
wrote:<br>
<br>
>On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián
Tete wrote:<br>
>> Hi Friends of oVirt<br>
>><br>
>> I'm trying to migrate my company from VMware to
oVirt.<br>
><br>
>We'd like to help you do this!<br>
><br>
>> In my final tests, I set up 2 more VLANs in
oVirt, (VM VLANs)<br>
>> The Virtual Machines in these VLANs, can be
reached from the external<br>
>>IPs<br>
>> from the net range,<br>
>> but from the Virtual machines only can ping the
Host with the Bridge and<br>
>> itself, can't reach the gateway. ¿?<br>
>><br>
>> I configured a IP Forwarding in the Host with
the virtual machine, and<br>
>> nothing changes...<br>
>><br>
>> Any idea ? This is the last duty before embrace
oVirt in the company.<br>
>><br>
>> Look to the VLAN 100 configuration (My desired
VM Network):<br>
>><br>
>> <a moz-do-not-send="true"
href="http://postimg.org/image/7hrog0a2n/"
rel="noreferrer"
target="_blank">http://postimg.org/image/7hrog0a2n/</a>...
>><br>
>> <a moz-do-not-send="true"
href="http://postimg.org/image/68b40i1vr/"
rel="noreferrer"
target="_blank">http://postimg.org/image/68b40i1vr/</a>...
>><br>
>> <a moz-do-not-send="true"
href="http://postimg.org/image/lu6mlshgp/"
rel="noreferrer"
target="_blank">http://postimg.org/image/lu6mlshgp/</a>...
><br>
>I must admit that I don't understand your problem
yet. When you ping<br>
>from inside your guest, where are your packets
dropped?<br>
><br>
>I'd like to point that your "Hosting" network, as
most VM networks, is<br>
>better off left without an IP address. The benefit
of this is better<br>
>security (host TCP stack is not accessible from VMs)
and less chances of<br>
>routing collisions from the host.<br>
><br>
>So unless you need to use the same network for
something other than VM<br>
>communication, try to clear its address.<br>
><br>
>Regards,<br>
>Dan.<br>
</div>
</div>
<div class="HOEnZb">
<div
class="h5">>_______________________________________________<br>
>Users mailing list<br>
><a moz-do-not-send="true"
href="mailto:Users@ovirt.org">Users@ovirt.org</a><br>
><a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<br>
</div>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</body>
</html>
--------------000401010805090300040509--
11:26 a.m.
Perhaps us are affected by the following error :
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968
I will keep you informed
Thanks Friends
2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
Hi Friends of oVirt
This the data required:
I have a HP Enclosure with a HP SAN.
I can't change the net settings in the switch because we have VMware
Virtual Machines in production in the same enclosure.
The switch is in Trunk Mode and all the traffic are in Tagged VLAN's with
ID's: 1,50,90,91 and 100.
I can play with 6 blades.
I in the first Blade I installed oVirt in hosted engine mode.
The only S.O is CentOS 7.1
I used inxi to brig the data for you:
My First Host is the only host until now (SPM) is the first data domain
(NFS) and contains the hosted engine machine.
I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
without any VLAN Tagged configuration.
This the data for my first host:
http://pastebin.com/dfC0XTQM
This the data for the Engine:
http://pastebin.com/JdrMSbj0
This the data for the Virtual Machine created in VLAN 50:
S.O : CentOS 7.1
SELinux: Permissive
IP ADDRESS: 192.168.50.8
PREFIX: 27
GATEWAY: 192.168.50.1
Interface: eth0
The Virtual Machine hasn´t any VLAN configuration.
In the 3 S.O, Network Manager is stopped and disabled, connectivity is
managed by the network daemon.
This is the data for the Networking in the admin interface:
http://postimg.org/image/lbypejxrh/
http://postimg.org/image/jtkyhqs8f/
http://postimg.org/image/7dwf1nb9f/
http://postimg.org/image/6i9t75g33/
http://postimg.org/image/sm8e6lecv/
http://postimg.org/image/cvig7rjuv/
http://postimg.org/image/fxcthsrtl/
http://postimg.org/image/o6xjwwvyz/
http://postimg.org/image/pv5ar5v3j/
http://postimg.org/image/dx8br0gq7/
http://postimg.org/image/baixp4b0j/
This the case
With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
Machine can ping myself (192.168.50.8) but I can't reach the gateway, can't
reach the host, can't reach Internet.
Any help is appreciated
Thanks Friends of oVirt
2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net>:
> Hi,
>
> To make it easier to understand what the situation is, it would help to
> see your bridging configuration and your interface configration.
>
> Something like:
>
> #> ip addr
>
> And
>
> #> brctl show
>
> Regards
> Soeren
>
> On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan Kenigsberg"
> <users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
>
> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
> >> Hi Friends of oVirt
> >>
> >> I'm trying to migrate my company from VMware to oVirt.
> >
> >We'd like to help you do this!
> >
> >> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
> >> The Virtual Machines in these VLANs, can be reached from the external
> >>IPs
> >> from the net range,
> >> but from the Virtual machines only can ping the Host with the Bridge
> and
> >> itself, can't reach the gateway. ¿?
> >>
> >> I configured a IP Forwarding in the Host with the virtual machine, and
> >> nothing changes...
> >>
> >> Any idea ? This is the last duty before embrace oVirt in the company.
> >>
> >> Look to the VLAN 100 configuration (My desired VM Network):
> >>
> >> http://postimg.org/image/7hrog0a2n/
> >>
> >> http://postimg.org/image/68b40i1vr/
> >>
> >> http://postimg.org/image/lu6mlshgp/
> >
> >I must admit that I don't understand your problem yet. When you ping
> >from inside your guest, where are your packets dropped?
> >
> >I'd like to point that your "Hosting" network, as most VM networks,
is
> >better off left without an IP address. The benefit of this is better
> >security (host TCP stack is not accessible from VMs) and less chances of
> >routing collisions from the host.
> >
> >So unless you need to use the same network for something other than VM
> >communication, try to clear its address.
> >
> >Regards,
> >Dan.
> >_______________________________________________
> >Users mailing list
> >Users(a)ovirt.org
> >http://lists.ovirt.org/mailman/listinfo/users
>
>
11:29 a.m.
I found the reason of my Problem: the virtual machines can't write the ARP
table ¡¡¿?!!
When I manually use the command:
arp -s 192.168.XXX.XX 00:09:XX:XX:XX:XX
I can reach the gateway
I can't reach anything from my net segment but i can reach Internet (Double
¡¡¿?!!)
For the moment I wrote a script, but is awful to do this.
Any idea ?
Thanks in advance :)
2015-07-10 11:26 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
Perhaps us are affected by the following error :
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968
I will keep you informed
Thanks Friends
2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
> Hi Friends of oVirt
>
> This the data required:
>
> I have a HP Enclosure with a HP SAN.
> I can't change the net settings in the switch because we have VMware
> Virtual Machines in production in the same enclosure.
> The switch is in Trunk Mode and all the traffic are in Tagged VLAN's with
> ID's: 1,50,90,91 and 100.
> I can play with 6 blades.
> I in the first Blade I installed oVirt in hosted engine mode.
> The only S.O is CentOS 7.1
>
> I used inxi to brig the data for you:
>
> My First Host is the only host until now (SPM) is the first data domain
> (NFS) and contains the hosted engine machine.
> I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
> without any VLAN Tagged configuration.
>
> This the data for my first host:
>
> http://pastebin.com/dfC0XTQM
>
> This the data for the Engine:
>
> http://pastebin.com/JdrMSbj0
>
> This the data for the Virtual Machine created in VLAN 50:
>
> S.O : CentOS 7.1
> SELinux: Permissive
> IP ADDRESS: 192.168.50.8
> PREFIX: 27
> GATEWAY: 192.168.50.1
> Interface: eth0
>
> The Virtual Machine hasn´t any VLAN configuration.
>
> In the 3 S.O, Network Manager is stopped and disabled, connectivity is
> managed by the network daemon.
>
> This is the data for the Networking in the admin interface:
>
> http://postimg.org/image/lbypejxrh/
>
> http://postimg.org/image/jtkyhqs8f/
>
> http://postimg.org/image/7dwf1nb9f/
>
> http://postimg.org/image/6i9t75g33/
>
> http://postimg.org/image/sm8e6lecv/
>
> http://postimg.org/image/cvig7rjuv/
>
> http://postimg.org/image/fxcthsrtl/
>
> http://postimg.org/image/o6xjwwvyz/
>
> http://postimg.org/image/pv5ar5v3j/
>
> http://postimg.org/image/dx8br0gq7/
>
> http://postimg.org/image/baixp4b0j/
>
> This the case
>
> With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
> Machine can ping myself (192.168.50.8) but I can't reach the gateway, can't
> reach the host, can't reach Internet.
>
> Any help is appreciated
>
> Thanks Friends of oVirt
>
>
>
>
>
>
>
>
> 2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net>:
>
>> Hi,
>>
>> To make it easier to understand what the situation is, it would help to
>> see your bridging configuration and your interface configration.
>>
>> Something like:
>>
>> #> ip addr
>>
>> And
>>
>> #> brctl show
>>
>> Regards
>> Soeren
>>
>> On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan
Kenigsberg"
>> <users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
>>
>> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>> >> Hi Friends of oVirt
>> >>
>> >> I'm trying to migrate my company from VMware to oVirt.
>> >
>> >We'd like to help you do this!
>> >
>> >> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>> >> The Virtual Machines in these VLANs, can be reached from the external
>> >>IPs
>> >> from the net range,
>> >> but from the Virtual machines only can ping the Host with the Bridge
>> and
>> >> itself, can't reach the gateway. ¿?
>> >>
>> >> I configured a IP Forwarding in the Host with the virtual machine, and
>> >> nothing changes...
>> >>
>> >> Any idea ? This is the last duty before embrace oVirt in the company.
>> >>
>> >> Look to the VLAN 100 configuration (My desired VM Network):
>> >>
>> >> http://postimg.org/image/7hrog0a2n/
>> >>
>> >> http://postimg.org/image/68b40i1vr/
>> >>
>> >> http://postimg.org/image/lu6mlshgp/
>> >
>> >I must admit that I don't understand your problem yet. When you ping
>> >from inside your guest, where are your packets dropped?
>> >
>> >I'd like to point that your "Hosting" network, as most VM
networks, is
>> >better off left without an IP address. The benefit of this is better
>> >security (host TCP stack is not accessible from VMs) and less chances of
>> >routing collisions from the host.
>> >
>> >So unless you need to use the same network for something other than VM
>> >communication, try to clear its address.
>> >
>> >Regards,
>> >Dan.
>> >_______________________________________________
>> >Users mailing list
>> >Users(a)ovirt.org
>> >http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
2:43 a.m.
Julian,
Lets try a more systematic approach (similar to what Donny suggests):
Please disable your arp script, and reproduce the situation where your vm
cannot connect to the outside.
It will be also a good idea to have the failing machine be the only powered
on machine connected to the network (bridge).
* from the machine os run a ping to a pingable destination outside of your
network (8.8.8.8?)
* run tcpdump on the hypervisor on several interfaces:
* the vm tap device (vnet0? vnet1?)
* the vm network bridge device (hosting?), where the tap device is
attached to. This should be visible via brctl.
* the vlan device underneath the bridge (this one should have a name like
'eno1.50' where eno1 is the physical nic and 50 is the vlan tag)
* the physical device (the ethernet nic)
The tcpdump command requires root privileges and looks like this: "sudo
tcpdump -n -i <device_name> icmp or arp"
What I assume we will see are only icmp requests (pings) and no icmp
replies (pongs). There might be also be only arp requests and
no arp replies.
What I am interested at is the arp broadcasts, as the vm should broadcast
an arp request (who-is <my_gateway_ip>).
My first guess is that is no response or there is one but the vm cannot
hear it. This is why I used the arp filter in the tcpdump command.
This should shed some light on where the problem is and in which layer.
find out where the traffic is not forwarded.
Also, when you locate the point of failure, try and wait for the traffic to
'suddenly work' as you said and then figure out what was changed.
We would love to see the dumps and coontinue to help.
Thanks,
Ido
On Thu, Oct 8, 2015 at 7:29 PM, Julián Tete <danteconrad14(a)gmail.com> wrote:
I found the reason of my Problem: the virtual machines can't
write the ARP
table ¡¡¿?!!
When I manually use the command:
arp -s 192.168.XXX.XX 00:09:XX:XX:XX:XX
I can reach the gateway
I can't reach anything from my net segment but i can reach Internet
(Double ¡¡¿?!!)
For the moment I wrote a script, but is awful to do this.
Any idea ?
Thanks in advance :)
2015-07-10 11:26 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
> Perhaps us are affected by the following error :
>
> http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968
>
> I will keep you informed
>
> Thanks Friends
>
> 2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
>
>> Hi Friends of oVirt
>>
>> This the data required:
>>
>> I have a HP Enclosure with a HP SAN.
>> I can't change the net settings in the switch because we have VMware
>> Virtual Machines in production in the same enclosure.
>> The switch is in Trunk Mode and all the traffic are in Tagged VLAN's
>> with ID's: 1,50,90,91 and 100.
>> I can play with 6 blades.
>> I in the first Blade I installed oVirt in hosted engine mode.
>> The only S.O is CentOS 7.1
>>
>> I used inxi to brig the data for you:
>>
>> My First Host is the only host until now (SPM) is the first data domain
>> (NFS) and contains the hosted engine machine.
>> I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
>> without any VLAN Tagged configuration.
>>
>> This the data for my first host:
>>
>> http://pastebin.com/dfC0XTQM
>>
>> This the data for the Engine:
>>
>> http://pastebin.com/JdrMSbj0
>>
>> This the data for the Virtual Machine created in VLAN 50:
>>
>> S.O : CentOS 7.1
>> SELinux: Permissive
>> IP ADDRESS: 192.168.50.8
>> PREFIX: 27
>> GATEWAY: 192.168.50.1
>> Interface: eth0
>>
>> The Virtual Machine hasn´t any VLAN configuration.
>>
>> In the 3 S.O, Network Manager is stopped and disabled, connectivity is
>> managed by the network daemon.
>>
>> This is the data for the Networking in the admin interface:
>>
>> http://postimg.org/image/lbypejxrh/
>>
>> http://postimg.org/image/jtkyhqs8f/
>>
>> http://postimg.org/image/7dwf1nb9f/
>>
>> http://postimg.org/image/6i9t75g33/
>>
>> http://postimg.org/image/sm8e6lecv/
>>
>> http://postimg.org/image/cvig7rjuv/
>>
>> http://postimg.org/image/fxcthsrtl/
>>
>> http://postimg.org/image/o6xjwwvyz/
>>
>> http://postimg.org/image/pv5ar5v3j/
>>
>> http://postimg.org/image/dx8br0gq7/
>>
>> http://postimg.org/image/baixp4b0j/
>>
>> This the case
>>
>> With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
>> Machine can ping myself (192.168.50.8) but I can't reach the gateway,
can't
>> reach the host, can't reach Internet.
>>
>> Any help is appreciated
>>
>> Thanks Friends of oVirt
>>
>>
>>
>>
>>
>>
>>
>>
>> 2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net>:
>>
>>> Hi,
>>>
>>> To make it easier to understand what the situation is, it would help to
>>> see your bridging configuration and your interface configration.
>>>
>>> Something like:
>>>
>>> #> ip addr
>>>
>>> And
>>>
>>> #> brctl show
>>>
>>> Regards
>>> Soeren
>>>
>>> On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan
>>> Kenigsberg"
>>> <users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
>>>
>>> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>>> >> Hi Friends of oVirt
>>> >>
>>> >> I'm trying to migrate my company from VMware to oVirt.
>>> >
>>> >We'd like to help you do this!
>>> >
>>> >> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>>> >> The Virtual Machines in these VLANs, can be reached from the
external
>>> >>IPs
>>> >> from the net range,
>>> >> but from the Virtual machines only can ping the Host with the
Bridge
>>> and
>>> >> itself, can't reach the gateway. ¿?
>>> >>
>>> >> I configured a IP Forwarding in the Host with the virtual machine,
>>> and
>>> >> nothing changes...
>>> >>
>>> >> Any idea ? This is the last duty before embrace oVirt in the
company.
>>> >>
>>> >> Look to the VLAN 100 configuration (My desired VM Network):
>>> >>
>>> >> http://postimg.org/image/7hrog0a2n/
>>> >>
>>> >> http://postimg.org/image/68b40i1vr/
>>> >>
>>> >> http://postimg.org/image/lu6mlshgp/
>>> >
>>> >I must admit that I don't understand your problem yet. When you ping
>>> >from inside your guest, where are your packets dropped?
>>> >
>>> >I'd like to point that your "Hosting" network, as most VM
networks, is
>>> >better off left without an IP address. The benefit of this is better
>>> >security (host TCP stack is not accessible from VMs) and less chances
>>> of
>>> >routing collisions from the host.
>>> >
>>> >So unless you need to use the same network for something other than VM
>>> >communication, try to clear its address.
>>> >
>>> >Regards,
>>> >Dan.
>>> >_______________________________________________
>>> >Users mailing list
>>> >Users(a)ovirt.org
>>> >http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Thanks,
Ido Barkan
7:36 p.m.
Hello Friends of oVirt
I'm glad to get your help. I'm trying to build a community of oVirt in
Colombia.
This is the data requested:
#########HOST########
Software
OS Version: RHEL - 7 - 1.1503.el7.centos.2.8
Kernel Version: 3.10.0 - 229.14.1.el7.x86_64
KVM Version: 3.10.0 - 229.14.1.el7.x86_64
LIBVIRT Version: libvirt-1.2.8-16.el7_1.4
VDSM Version: vdsm-4.17.9-0.el7.centos
SPICE Version: 0.12.4 - 9.el7_1.3
GlusterFS Version: glusterfs-3.7.5-1.el7
CEPH Version: librbd1-0.80.7-2.el7
Hardware
Manufacturer: HP
Family: ProLiant
Product Name: ProLiant BL460c Gen8
Version: [N/A]
UUID: 2197C286-BC9C-4CF3-99CB-......
Serial Number: VCX.....
CPU Model: Intel(R) Xeon(R) CPU E5-2667 v2 @ 3.30GHz
CPU Type: Intel SandyBridge Family
CPU Sockets: 2
CPU Cores per Socket: 8
CPU Threads per Core: 2 (SMT Enabled)
Model name: QMH2572 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine
HBA, NFF
Device type: FC
Model name: QMH2572 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine
HBA, NFF
Device type: FC
The rest of the data is here:
http://pastebin.com/Snc27Jgn
Thank very much
I love oVirt 3.6, so far so good.
This is the last detail to dump VMware
:)
2015-10-13 2:43 GMT-05:00 Ido Barkan <ibarkan(a)redhat.com>:
Julian,
Lets try a more systematic approach (similar to what Donny suggests):
Please disable your arp script, and reproduce the situation where your vm
cannot connect to the outside.
It will be also a good idea to have the failing machine be the only
powered on machine connected to the network (bridge).
* from the machine os run a ping to a pingable destination outside of your
network (8.8.8.8?)
* run tcpdump on the hypervisor on several interfaces:
* the vm tap device (vnet0? vnet1?)
* the vm network bridge device (hosting?), where the tap device is
attached to. This should be visible via brctl.
* the vlan device underneath the bridge (this one should have a name
like 'eno1.50' where eno1 is the physical nic and 50 is the vlan tag)
* the physical device (the ethernet nic)
The tcpdump command requires root privileges and looks like this: "sudo
tcpdump -n -i <device_name> icmp or arp"
What I assume we will see are only icmp requests (pings) and no icmp
replies (pongs). There might be also be only arp requests and
no arp replies.
What I am interested at is the arp broadcasts, as the vm should broadcast
an arp request (who-is <my_gateway_ip>).
My first guess is that is no response or there is one but the vm cannot
hear it. This is why I used the arp filter in the tcpdump command.
This should shed some light on where the problem is and in which layer.
find out where the traffic is not forwarded.
Also, when you locate the point of failure, try and wait for the traffic
to 'suddenly work' as you said and then figure out what was changed.
We would love to see the dumps and coontinue to help.
Thanks,
Ido
On Thu, Oct 8, 2015 at 7:29 PM, Julián Tete <danteconrad14(a)gmail.com>
wrote:
> I found the reason of my Problem: the virtual machines can't write the
> ARP table ¡¡¿?!!
>
> When I manually use the command:
>
> arp -s 192.168.XXX.XX 00:09:XX:XX:XX:XX
>
> I can reach the gateway
>
> I can't reach anything from my net segment but i can reach Internet
> (Double ¡¡¿?!!)
>
> For the moment I wrote a script, but is awful to do this.
>
> Any idea ?
>
> Thanks in advance :)
>
> 2015-07-10 11:26 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
>
>> Perhaps us are affected by the following error :
>>
>> http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968
>>
>> I will keep you informed
>>
>> Thanks Friends
>>
>> 2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
>>
>>> Hi Friends of oVirt
>>>
>>> This the data required:
>>>
>>> I have a HP Enclosure with a HP SAN.
>>> I can't change the net settings in the switch because we have VMware
>>> Virtual Machines in production in the same enclosure.
>>> The switch is in Trunk Mode and all the traffic are in Tagged VLAN's
>>> with ID's: 1,50,90,91 and 100.
>>> I can play with 6 blades.
>>> I in the first Blade I installed oVirt in hosted engine mode.
>>> The only S.O is CentOS 7.1
>>>
>>> I used inxi to brig the data for you:
>>>
>>> My First Host is the only host until now (SPM) is the first data domain
>>> (NFS) and contains the hosted engine machine.
>>> I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
>>> without any VLAN Tagged configuration.
>>>
>>> This the data for my first host:
>>>
>>> http://pastebin.com/dfC0XTQM
>>>
>>> This the data for the Engine:
>>>
>>> http://pastebin.com/JdrMSbj0
>>>
>>> This the data for the Virtual Machine created in VLAN 50:
>>>
>>> S.O : CentOS 7.1
>>> SELinux: Permissive
>>> IP ADDRESS: 192.168.50.8
>>> PREFIX: 27
>>> GATEWAY: 192.168.50.1
>>> Interface: eth0
>>>
>>> The Virtual Machine hasn´t any VLAN configuration.
>>>
>>> In the 3 S.O, Network Manager is stopped and disabled, connectivity is
>>> managed by the network daemon.
>>>
>>> This is the data for the Networking in the admin interface:
>>>
>>> http://postimg.org/image/lbypejxrh/
>>>
>>> http://postimg.org/image/jtkyhqs8f/
>>>
>>> http://postimg.org/image/7dwf1nb9f/
>>>
>>> http://postimg.org/image/6i9t75g33/
>>>
>>> http://postimg.org/image/sm8e6lecv/
>>>
>>> http://postimg.org/image/cvig7rjuv/
>>>
>>> http://postimg.org/image/fxcthsrtl/
>>>
>>> http://postimg.org/image/o6xjwwvyz/
>>>
>>> http://postimg.org/image/pv5ar5v3j/
>>>
>>> http://postimg.org/image/dx8br0gq7/
>>>
>>> http://postimg.org/image/baixp4b0j/
>>>
>>> This the case
>>>
>>> With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
>>> Machine can ping myself (192.168.50.8) but I can't reach the gateway,
can't
>>> reach the host, can't reach Internet.
>>>
>>> Any help is appreciated
>>>
>>> Thanks Friends of oVirt
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow(a)mcon.net>:
>>>
>>>> Hi,
>>>>
>>>> To make it easier to understand what the situation is, it would help to
>>>> see your bridging configuration and your interface configration.
>>>>
>>>> Something like:
>>>>
>>>> #> ip addr
>>>>
>>>> And
>>>>
>>>> #> brctl show
>>>>
>>>> Regards
>>>> Soeren
>>>>
>>>> On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan
>>>> Kenigsberg"
>>>> <users-bounces(a)ovirt.org on behalf of danken(a)redhat.com> wrote:
>>>>
>>>> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>>>> >> Hi Friends of oVirt
>>>> >>
>>>> >> I'm trying to migrate my company from VMware to oVirt.
>>>> >
>>>> >We'd like to help you do this!
>>>> >
>>>> >> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>>>> >> The Virtual Machines in these VLANs, can be reached from the
>>>> external
>>>> >>IPs
>>>> >> from the net range,
>>>> >> but from the Virtual machines only can ping the Host with the
>>>> Bridge and
>>>> >> itself, can't reach the gateway. ¿?
>>>> >>
>>>> >> I configured a IP Forwarding in the Host with the virtual
machine,
>>>> and
>>>> >> nothing changes...
>>>> >>
>>>> >> Any idea ? This is the last duty before embrace oVirt in the
>>>> company.
>>>> >>
>>>> >> Look to the VLAN 100 configuration (My desired VM Network):
>>>> >>
>>>> >> http://postimg.org/image/7hrog0a2n/
>>>> >>
>>>> >> http://postimg.org/image/68b40i1vr/
>>>> >>
>>>> >> http://postimg.org/image/lu6mlshgp/
>>>> >
>>>> >I must admit that I don't understand your problem yet. When you
ping
>>>> >from inside your guest, where are your packets dropped?
>>>> >
>>>> >I'd like to point that your "Hosting" network, as most
VM networks, is
>>>> >better off left without an IP address. The benefit of this is better
>>>> >security (host TCP stack is not accessible from VMs) and less
chances
>>>> of
>>>> >routing collisions from the host.
>>>> >
>>>> >So unless you need to use the same network for something other than
VM
>>>> >communication, try to clear its address.
>>>> >
>>>> >Regards,
>>>> >Dan.
>>>> >_______________________________________________
>>>> >Users mailing list
>>>> >Users(a)ovirt.org
>>>> >http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
--
Thanks,
Ido Barkan
6:31 p.m.
Good News Everyone :)
I Change from the CentOS 7 kernel to kernel-ml from elrepo in the Host....
And oVirt 3.6 Release Candidate 3 works like a charm
Thank you pals :)
2015-10-21 19:36 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
Hello Friends of oVirt
I'm glad to get your help. I'm trying to build a community of oVirt in
Colombia.
This is the data requested:
#########HOST########
Software
OS Version: RHEL - 7 - 1.1503.el7.centos.2.8
Kernel Version: 3.10.0 - 229.14.1.el7.x86_64
KVM Version: 3.10.0 - 229.14.1.el7.x86_64
LIBVIRT Version: libvirt-1.2.8-16.el7_1.4
VDSM Version: vdsm-4.17.9-0.el7.centos
SPICE Version: 0.12.4 - 9.el7_1.3
GlusterFS Version: glusterfs-3.7.5-1.el7
CEPH Version: librbd1-0.80.7-2.el7
Hardware
Manufacturer: HP
Family: ProLiant
Product Name: ProLiant BL460c Gen8
Version: [N/A]
UUID: 2197C286-BC9C-4CF3-99CB-......
Serial Number: VCX.....
CPU Model: Intel(R) Xeon(R) CPU E5-2667 v2 @ 3.30GHz
CPU Type: Intel SandyBridge Family
CPU Sockets: 2
CPU Cores per Socket: 8
CPU Threads per Core: 2 (SMT Enabled)
Model name: QMH2572 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine
HBA, NFF
Device type: FC
Model name: QMH2572 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine
HBA, NFF
Device type: FC
The rest of the data is here:
http://pastebin.com/Snc27Jgn
Thank very much
I love oVirt 3.6, so far so good.
This is the last detail to dump VMware
:)
2015-10-13 2:43 GMT-05:00 Ido Barkan <ibarkan(a)redhat.com>:
> Julian,
> Lets try a more systematic approach (similar to what Donny suggests):
>
> Please disable your arp script, and reproduce the situation where your vm
> cannot connect to the outside.
> It will be also a good idea to have the failing machine be the only
> powered on machine connected to the network (bridge).
>
> * from the machine os run a ping to a pingable destination outside of
> your network (8.8.8.8?)
> * run tcpdump on the hypervisor on several interfaces:
> * the vm tap device (vnet0? vnet1?)
> * the vm network bridge device (hosting?), where the tap device is
> attached to. This should be visible via brctl.
> * the vlan device underneath the bridge (this one should have a name
> like 'eno1.50' where eno1 is the physical nic and 50 is the vlan tag)
> * the physical device (the ethernet nic)
>
> The tcpdump command requires root privileges and looks like this: "sudo
> tcpdump -n -i <device_name> icmp or arp"
>
> What I assume we will see are only icmp requests (pings) and no icmp
> replies (pongs). There might be also be only arp requests and
> no arp replies.
> What I am interested at is the arp broadcasts, as the vm should broadcast
> an arp request (who-is <my_gateway_ip>).
> My first guess is that is no response or there is one but the vm cannot
> hear it. This is why I used the arp filter in the tcpdump command.
>
> This should shed some light on where the problem is and in which layer.
> find out where the traffic is not forwarded.
>
> Also, when you locate the point of failure, try and wait for the traffic
> to 'suddenly work' as you said and then figure out what was changed.
>
> We would love to see the dumps and coontinue to help.
>
> Thanks,
> Ido
>
>
> On Thu, Oct 8, 2015 at 7:29 PM, Julián Tete <danteconrad14(a)gmail.com>
> wrote:
>
>> I found the reason of my Problem: the virtual machines can't write the
>> ARP table ¡¡¿?!!
>>
>> When I manually use the command:
>>
>> arp -s 192.168.XXX.XX 00:09:XX:XX:XX:XX
>>
>> I can reach the gateway
>>
>> I can't reach anything from my net segment but i can reach Internet
>> (Double ¡¡¿?!!)
>>
>> For the moment I wrote a script, but is awful to do this.
>>
>> Any idea ?
>>
>> Thanks in advance :)
>>
>> 2015-07-10 11:26 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
>>
>>> Perhaps us are affected by the following error :
>>>
>>> http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968
>>>
>>> I will keep you informed
>>>
>>> Thanks Friends
>>>
>>> 2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14(a)gmail.com>:
>>>
>>>> Hi Friends of oVirt
>>>>
>>>> This the data required:
>>>>
>>>> I have a HP Enclosure with a HP SAN.
>>>> I can't change the net settings in the switch because we have VMware
>>>> Virtual Machines in production in the same enclosure.
>>>> The switch is in Trunk Mode and all the traffic are in Tagged VLAN's
>>>> with ID's: 1,50,90,91 and 100.
>>>> I can play with 6 blades.
>>>> I in the first Blade I installed oVirt in hosted engine mode.
>>>> The only S.O is CentOS 7.1
>>>>
>>>> I used inxi to brig the data for you:
>>>>
>>>> My First Host is the only host until now (SPM) is the first data
>>>> domain (NFS) and contains the hosted engine machine.
>>>> I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
>>>> without any VLAN Tagged configuration.
>>>>
>>>> This the data for my first host:
>>>>
>>>> http://pastebin.com/dfC0XTQM
>>>>
>>>> This the data for the Engine:
>>>>
>>>> http://pastebin.com/JdrMSbj0
>>>>
>>>> This the data for the Virtual Machine created in VLAN 50:
>>>>
>>>> S.O : CentOS 7.1
>>>> SELinux: Permissive
>>>> IP ADDRESS: 192.168.50.8
>>>> PREFIX: 27
>>>> GATEWAY: 192.168.50.1
>>>> Interface: eth0
>>>>
>>>> The Virtual Machine hasn´t any VLAN configuration.
>>>>
>>>> In the 3 S.O, Network Manager is stopped and disabled, connectivity is
>>>> managed by the network daemon.
>>>>
>>>> This is the data for the Networking in the admin interface:
>>>>
>>>> http://postimg.org/image/lbypejxrh/
>>>>
>>>> http://postimg.org/image/jtkyhqs8f/
>>>>
>>>> http://postimg.org/image/7dwf1nb9f/
>>>>
>>>> http://postimg.org/image/6i9t75g33/
>>>>
>>>> http://postimg.org/image/sm8e6lecv/
>>>>
>>>> http://postimg.org/image/cvig7rjuv/
>>>>
>>>> http://postimg.org/image/fxcthsrtl/
>>>>
>>>> http://postimg.org/image/o6xjwwvyz/
>>>>
>>>> http://postimg.org/image/pv5ar5v3j/
>>>>
>>>> http://postimg.org/image/dx8br0gq7/
>>>>
>>>> http://postimg.org/image/baixp4b0j/
>>>>
>>>> This the case
>>>>
>>>> With No IP in the VLAN, and IP in the Virtual Machine, From the
>>>> Virtual Machine can ping myself (192.168.50.8) but I can't reach the
>>>> gateway, can't reach the host, can't reach Internet.
>>>>
>>>> Any help is appreciated
>>>>
>>>> Thanks Friends of oVirt
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 2015-07-06 7:51 GMT-05:00 Soeren Malchow
<soeren.malchow(a)mcon.net>:
>>>>
>>>>> Hi,
>>>>>
>>>>> To make it easier to understand what the situation is, it would help
>>>>> to
>>>>> see your bridging configuration and your interface configration.
>>>>>
>>>>> Something like:
>>>>>
>>>>> #> ip addr
>>>>>
>>>>> And
>>>>>
>>>>> #> brctl show
>>>>>
>>>>> Regards
>>>>> Soeren
>>>>>
>>>>> On 06/07/15 13:30, "users-bounces(a)ovirt.org on behalf of Dan
>>>>> Kenigsberg"
>>>>> <users-bounces(a)ovirt.org on behalf of danken(a)redhat.com>
wrote:
>>>>>
>>>>> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>>>>> >> Hi Friends of oVirt
>>>>> >>
>>>>> >> I'm trying to migrate my company from VMware to oVirt.
>>>>> >
>>>>> >We'd like to help you do this!
>>>>> >
>>>>> >> In my final tests, I set up 2 more VLANs in oVirt, (VM
VLANs)
>>>>> >> The Virtual Machines in these VLANs, can be reached from
the
>>>>> external
>>>>> >>IPs
>>>>> >> from the net range,
>>>>> >> but from the Virtual machines only can ping the Host with
the
>>>>> Bridge and
>>>>> >> itself, can't reach the gateway. ¿?
>>>>> >>
>>>>> >> I configured a IP Forwarding in the Host with the virtual
machine,
>>>>> and
>>>>> >> nothing changes...
>>>>> >>
>>>>> >> Any idea ? This is the last duty before embrace oVirt in
the
>>>>> company.
>>>>> >>
>>>>> >> Look to the VLAN 100 configuration (My desired VM Network):
>>>>> >>
>>>>> >> http://postimg.org/image/7hrog0a2n/
>>>>> >>
>>>>> >> http://postimg.org/image/68b40i1vr/
>>>>> >>
>>>>> >> http://postimg.org/image/lu6mlshgp/
>>>>> >
>>>>> >I must admit that I don't understand your problem yet. When
you ping
>>>>> >from inside your guest, where are your packets dropped?
>>>>> >
>>>>> >I'd like to point that your "Hosting" network, as
most VM networks,
>>>>> is
>>>>> >better off left without an IP address. The benefit of this is
better
>>>>> >security (host TCP stack is not accessible from VMs) and less
>>>>> chances of
>>>>> >routing collisions from the host.
>>>>> >
>>>>> >So unless you need to use the same network for something other
than
>>>>> VM
>>>>> >communication, try to clear its address.
>>>>> >
>>>>> >Regards,
>>>>> >Dan.
>>>>> >_______________________________________________
>>>>> >Users mailing list
>>>>> >Users(a)ovirt.org
>>>>> >http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
> Thanks,
> Ido Barkan
>
3115
days inactive
3229
days old
12 comments
6 participants
participants (6)
-
Dan Kenigsberg -
Donny Davis -
Ido Barkan -
Jeff Bailey -
Julián Tete -
Soeren Malchow