12:46 p.m.
Hi. I'm new to oVirt.
Trying to install the first node with hosted engine on it.
The node bare install process from the iso image
(ovirt-node-ng-installer-4.5.1-2022062306.el9.iso) is fine on a Fujitsu server.
Accessing via browser the node cockpit at port 9090, on the left panel the entry
"Virtualization" is missing (installing Node version 4.4.6 it was present and
working), so I can't launch the hosted engine setup via UI.
Trying to deploy via command line ( $ hosted-engine --deploy ), the installation process
stops with the error:
[ ERROR ] {'changed': True, 'stdout': '', 'stderr':
'', 'rc': 1, 'cmd': "[ -r /etc/sysconfig/libvirtd ]
&& sed -i '/## beginning of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/d' /etc/sysconfig/libvirtd", 'start':
'2022-08-04 18:24:31.817314', 'end': '2022-08-04 18:24:31.819845',
'delta': '0:00:00.002531', 'failed': True, 'msg':
'non-zero return code', 'invocation': {'module_args':
{'warn': False, '_raw_params': "[ -r /etc/sysconfig/libvirtd ]
&& sed -i '/## beginning of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/d' /etc/sysconfig/libvirtd", '_uses_shell':
True, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv':
None, 'chdir': None, 'executable': None, 'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines': [],
'stderr_lines': [], '_ansible_no_log': False, 'item':
'/etc/sysconfig/libvirtd', 'ansible_loop_var': 'item',
'_ansible_
item_label': '/etc/sysconfig/libvirtd'}
I can't really understand what's going on ...
Can anyone please point me in the right direction to fix that? Is it a bug?
Thanks!!!
g
4:14 p.m.
Most probably is a bug. Is there a newer ISO ?If not, try with a version (or 2 older) .
Best Regards,Strahil Nikolov
Hi. I'm new to oVirt.
Trying to install the first node with hosted engine on it.
The node bare install process from the iso image
(ovirt-node-ng-installer-4.5.1-2022062306.el9.iso) is fine on a Fujitsu server.
Accessing via browser the node cockpit at port 9090, on the left panel the entry
"Virtualization" is missing (installing Node version 4.4.6 it was present and
working), so I can't launch the hosted engine setup via UI.
Trying to deploy via command line ( $ hosted-engine --deploy ), the installation process
stops with the error:
[ ERROR ] {'changed': True, 'stdout': '', 'stderr':
'', 'rc': 1, 'cmd': "[ -r /etc/sysconfig/libvirtd ]
&& sed -i '/## beginning of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/d' /etc/sysconfig/libvirtd", 'start':
'2022-08-04 18:24:31.817314', 'end': '2022-08-04 18:24:31.819845',
'delta': '0:00:00.002531', 'failed': True, 'msg':
'non-zero return code', 'invocation': {'module_args':
{'warn': False, '_raw_params': "[ -r /etc/sysconfig/libvirtd ]
&& sed -i '/## beginning of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of configuration section by
vdsm-4.[0-9]\\+.[0-9]\\+/d' /etc/sysconfig/libvirtd", '_uses_shell':
True, 'stdin_add_newline': True, 'strip_empty_ends': True, 'argv':
None, 'chdir': None, 'executable': None, 'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines': [],
'stderr_lines': [], '_ansible_no_log': False, 'item':
'/etc/sysconfig/libvirtd', 'ansible_loop_var': 'item',
'_ansible_
item_label': '/etc/sysconfig/libvirtd'}
I can't really understand what's going on ...
Can anyone please point me in the right direction to fix that? Is it a bug?
Thanks!!!
g
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GXZY77N466A...
4:56 p.m.
Thanks for reply.
I did was you suggested and installed 4.4.6 version. Many other troubles
arised (i.e. Centos8 repos were EOL), but the tab "Virtualization" was
in place :)
Too many problems with that olde vesion, so I ended installing 4.5.2
pre-release version. The tab "Virtualization" is in place, but Engine
depoly can't end succefully via GUI. I had to lauch it via CLI adding
the "--4" option to exclude IPv6 configuration leading to DNS errors.
Hope it helps some other having same issues.
Regards
Giuliano
On 09/08/22 22:14, Strahil Nikolov wrote:
Most probably is a bug. Is there a newer ISO ?
If not, try with a version (or 2 older) .
Best Regards,
Strahil Nikolov
Hi. I'm new to oVirt.
Trying to install the first node with hosted engine on it.
The node bare install process from the iso image
(ovirt-node-ng-installer-4.5.1-2022062306.el9.iso) is fine on a
Fujitsu server.
Accessing via browser the node cockpit at port 9090, on the left
panel the entry "Virtualization" is missing (installing Node
version 4.4.6 it was present and working), so I can't launch the
hosted engine setup via UI.
Trying to deploy via command line ( $ hosted-engine --deploy ),
the installation process stops with the error:
[ ERROR ] {'changed': True, 'stdout': '', 'stderr':
'', 'rc': 1,
'cmd': "[ -r /etc/sysconfig/libvirtd ] && sed -i '/##
beginning of
configuration section by vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of
configuration section by vdsm-4.[0-9]\\+.[0-9]\\+/d'
/etc/sysconfig/libvirtd", 'start': '2022-08-04
18:24:31.817314',
'end': '2022-08-04 18:24:31.819845', 'delta':
'0:00:00.002531',
'failed': True, 'msg': 'non-zero return code',
'invocation':
{'module_args': {'warn': False, '_raw_params': "[ -r
/etc/sysconfig/libvirtd ] && sed -i '/## beginning of
configuration section by vdsm-4.[0-9]\\+.[0-9]\\+/,/## end of
configuration section by vdsm-4.[0-9]\\+.[0-9]\\+/d'
/etc/sysconfig/libvirtd", '_uses_shell': True,
'stdin_add_newline': True, 'strip_empty_ends': True, 'argv':
None,
'chdir': None, 'executable': None, 'creates': None,
'removes':
None, 'stdin': None}}, 'stdout_lines': [], 'stderr_lines':
[],
'_ansible_no_log': False, 'item': '/etc/sysconfig/libvirtd',
'ansible_loop_var': 'item', '_ansible_
item_label': '/etc/sysconfig/libvirtd'}
I can't really understand what's going on ...
Can anyone please point me in the right direction to fix that? Is
it a bug?
Thanks!!!
g
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GXZY77N466A...
--
Giuliano David
Systems & Networks Administration
NV Group Noviservice S.r.l. | Novisolution S.r.l. | idPost S.r.l.
645
days inactive
650
days old
2 comments
3 participants
participants (3)
-
Giuliano David -
giuliano.david＠nvgroup.it
-
Strahil Nikolov