10:13 a.m.
Hello oVirt guru`s !
How can I to add RAM to Hosted Engine VM?
Solution from "Fix: The recovery flow is:..." in
https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
oVirt Engine Version: 4.0.3-1.el7.centos
11:50 a.m.
I believe you can do it by editing this file: /var/run/ovirt-hosted-engine-ha/vm.conf and
then restarting the vm
Regards,
Logan
----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov aleksey.maksimov(a)it-kb.ru wrote:
| Hello oVirt guru`s !
|
| How can I to add RAM to Hosted Engine VM?
| Solution from "Fix: The recovery flow is:..." in
| https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
|
| oVirt Engine Version: 4.0.3-1.el7.centos
| _______________________________________________
| Users mailing list
| Users(a)ovirt.org
| http://lists.ovirt.org/mailman/listinfo/users
11:51 a.m.
Sorry hit send too quickly.
Move the shared storage version out of the way if you can. In my instance it was just an
NFS volume so it wasn't too hard to move it.
Regards,
Logan
----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
| I believe you can do it by editing this file:
| /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
|
| Regards,
| Logan
|
| ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov aleksey.maksimov(a)it-kb.ru
| wrote:
|
|| Hello oVirt guru`s !
||
|| How can I to add RAM to Hosted Engine VM?
|| Solution from "Fix: The recovery flow is:..." in
|| https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
||
|| oVirt Engine Version: 4.0.3-1.el7.centos
|| _______________________________________________
|| Users mailing list
|| Users(a)ovirt.org
| | http://lists.ovirt.org/mailman/listinfo/users
11:57 a.m.
My HE VM stored on FC Storage
24.09.2016, 19:51, "Logan Kuhn" <logank(a)wolfram.com>:
Sorry hit send too quickly.
Move the shared storage version out of the way if you can. In my instance it was just an
NFS volume so it wasn't too hard to move it.
Regards,
Logan
----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
| I believe you can do it by editing this file:
| /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
|
| Regards,
| Logan
|
| ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov aleksey.maksimov(a)it-kb.ru
| wrote:
|
|| Hello oVirt guru`s !
||
|| How can I to add RAM to Hosted Engine VM?
|| Solution from "Fix: The recovery flow is:..." in
|| https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
||
|| oVirt Engine Version: 4.0.3-1.el7.centos
|| _______________________________________________
|| Users mailing list
|| Users(a)ovirt.org
| | http://lists.ovirt.org/mailman/listinfo/users
1:14 a.m.
You need to edit the vm in the webui and increase the memory there. The
next cold boot of the machine will load it with the new config. Do note
that the engine has an interval which triggers the creation of the new
vm.conf. The interval config item can be checked using
```
engine-config -g OvfUpdateIntervalInMinutes
```
the vm.conf under the host is now always and extraction of the
configuration saved under your hosted_storage domain
On 24 September 2016 at 19:57, <aleksey.maksimov(a)it-kb.ru> wrote:
My HE VM stored on FC Storage
24.09.2016, 19:51, "Logan Kuhn" <logank(a)wolfram.com>:
> Sorry hit send too quickly.
>
> Move the shared storage version out of the way if you can. In my
instance it was just an NFS volume so it wasn't too hard to move it.
>
> Regards,
> Logan
>
> ----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
>
> | I believe you can do it by editing this file:
> | /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
> |
> | Regards,
> | Logan
> |
> | ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov
aleksey.maksimov(a)it-kb.ru
> | wrote:
> |
> || Hello oVirt guru`s !
> ||
> || How can I to add RAM to Hosted Engine VM?
> || Solution from "Fix: The recovery flow is:..." in
> || https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
> ||
> || oVirt Engine Version: 4.0.3-1.el7.centos
> || _______________________________________________
> || Users mailing list
> || Users(a)ovirt.org
> | | http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:57 a.m.
On Mon, Sep 26, 2016 at 7:56 AM, <aleksey.maksimov(a)it-kb.ru> wrote:
Thank you, Roy. It works. Just do not understand why this information
is
not available in the online documentation.
Sadly the online documentation within oVirt project is not well maintained.
If you have a github account and you want to contribute to
https://github.com/oVirt/ovirt-site, any documentation pull request is
welcome.
25.09.2016, 09:14, "Roy Golan" <rgolan(a)redhat.com>:
You need to edit the vm in the webui and increase the memory there. The
next cold boot of the machine will load it with the new config. Do note
that the engine has an interval which triggers the creation of the new
vm.conf. The interval config item can be checked using
```
engine-config -g OvfUpdateIntervalInMinutes
```
the vm.conf under the host is now always and extraction of the
configuration saved under your hosted_storage domain
On 24 September 2016 at 19:57, <aleksey.maksimov(a)it-kb.ru> wrote:
My HE VM stored on FC Storage
24.09.2016, 19:51, "Logan Kuhn" <logank(a)wolfram.com>:
> Sorry hit send too quickly.
>
> Move the shared storage version out of the way if you can. In my
instance it was just an NFS volume so it wasn't too hard to move it.
>
> Regards,
> Logan
>
> ----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
>
> | I believe you can do it by editing this file:
> | /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
> |
> | Regards,
> | Logan
> |
> | ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov
aleksey.maksimov(a)it-kb.ru
> | wrote:
> |
> || Hello oVirt guru`s !
> ||
> || How can I to add RAM to Hosted Engine VM?
> || Solution from "Fix: The recovery flow is:..." in
> || https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
> ||
> || oVirt Engine Version: 4.0.3-1.el7.centos
> || _______________________________________________
> || Users mailing list
> || Users(a)ovirt.org
> | | http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
<https://www.redhat.com/it/about/events/red-hat-open-source-day-2016>
4:10 a.m.
> 25.09.2016, 09:14, "Roy Golan" <rgolan(a)redhat.com>:
>
> You need to edit the vm in the webui and increase the memory there. The
> next cold boot of the machine will load it with the new config. Do note
> that the engine has an interval which triggers the creation of the new
> vm.conf. The interval config item can be checked using
>
> ```
>
>
Hello, from which version?
In my case I have "oVirt Engine Version: 4.0.2.7-1.el7.centos" and I get
this error if I try to modify from web admin, but I don't understand if it
could be related with something different....
https://drive.google.com/file/d/0BwoPbcrMv8mvdHRHamZJZm5iRkU/view?usp=sha...
Currently general pane for hosted engine vm is this one, so that OS appears
as "Other OS" (the engien vm was installed from appliance initially):
https://drive.google.com/file/d/0BwoPbcrMv8mvbkkyejJ4V1gxd2M/view?usp=sha...
Thanks,
Gianluca
7:02 a.m.
On Mon, Sep 26, 2016 at 11:10 AM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com
wrote:
>
>> 25.09.2016, 09:14, "Roy Golan" <rgolan(a)redhat.com>:
>>
>> You need to edit the vm in the webui and increase the memory there. The
>> next cold boot of the machine will load it with the new config. Do note
>> that the engine has an interval which triggers the creation of the new
>> vm.conf. The interval config item can be checked using
>>
>> ```
>>
>>
>
>
Hello, from which version?
In my case I have "oVirt Engine Version: 4.0.2.7-1.el7.centos" and I get
this error if I try to modify from web admin, but I don't understand if it
could be related with something different....
https://drive.google.com/file/d/0BwoPbcrMv8mvdHRHamZJZm5iRkU/
view?usp=sharing
Currently general pane for hosted engine vm is this one, so that OS
appears as "Other OS" (the engien vm was installed from appliance
initially):
https://drive.google.com/file/d/0BwoPbcrMv8mvbkkyejJ4V1gxd2M/
view?usp=sharing
Hi Gianluca,
are you able to recall or verify which version of ovirt-hosted-engine-setup
did you used when you initially created your hosted-engine env?
I suspect that your issue could be somehow related to
https://bugzilla.redhat.com/show_bug.cgi?id=1328921 and
https://bugzilla.redhat.com/show_bug.cgi?id=1339306 which have been fixed
which patch http://gerrit.ovirt.org/57906 for new deployment but not for
who deployed before that and than simply upgraded engine rpms over his
working engine VM.
For 4.1 we are thinking at a mechanism to upgrade also engine VM definition
when running engine-setup, currently it's not available.
Probably the best option to fix it right now is something like:
- set global maintenance mode
- manually removing the engine VM from the engine DB (to let the
auto-import procedure trigger again)
- shutdown the engine VM
- copy your /var/run/ovirt-hosted-engine-ha/vm.conf somewhere
- edit it adding the required devices
- start the engine VM with hosted-engine --vm-start --vm-conf=myvm.conf
- wait for the auto-import procedure to kick in and re-import the engine VM
with the additional devices
- exit global maintenance mode
Roy, do you see something simpler to achieve the same result?
Thanks,
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
7:37 a.m.
On Mon, Sep 26, 2016 at 2:02 PM, Simone Tiraboschi <stirabos(a)redhat.com>
wrote:
>
>
Hi Gianluca,
are you able to recall or verify which version of
ovirt-hosted-engine-setup did you used when you initially created your
hosted-engine env?
I suspect that your issue could be somehow related to
https://bugzilla.redhat.com/show_bug.cgi?id=1328921 and
https://bugzilla.redhat.com/show_bug.cgi?id=1339306 which have been fixed
which patch http://gerrit.ovirt.org/57906 for new deployment but not for
who deployed before that and than simply upgraded engine rpms over his
working engine VM.
For 4.1 we are thinking at a mechanism to upgrade also engine VM
definition when running engine-setup, currently it's not available.
Probably the best option to fix it right now is something like:
- set global maintenance mode
- manually removing the engine VM from the engine DB (to let the
auto-import procedure trigger again)
- shutdown the engine VM
- copy your /var/run/ovirt-hosted-engine-ha/vm.conf somewhere
- edit it adding the required devices
- start the engine VM with hosted-engine --vm-start --vm-conf=myvm.conf
- wait for the auto-import procedure to kick in and re-import the engine
VM with the additional devices
- exit global maintenance mode
Roy, do you see something simpler to achieve the same result?
Hello,
yes at first it was created in 3.6.0 at beginning of November 2015.
The gradually upgraded to 3.6.1, 3.6.2, 3.6.5, 4.0, 4.0.2
1:14 a.m.
The right way is simply to edit the hosted engine VM memory settings from
the admin UI.
The file is not meant to be edited and may lead to issues in your setup.
On Sat, Sep 24, 2016 at 7:57 PM, <aleksey.maksimov(a)it-kb.ru> wrote:
My HE VM stored on FC Storage
24.09.2016, 19:51, "Logan Kuhn" <logank(a)wolfram.com>:
> Sorry hit send too quickly.
>
> Move the shared storage version out of the way if you can. In my
instance it was just an NFS volume so it wasn't too hard to move it.
>
> Regards,
> Logan
>
> ----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
>
> | I believe you can do it by editing this file:
> | /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
> |
> | Regards,
> | Logan
> |
> | ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov
aleksey.maksimov(a)it-kb.ru
> | wrote:
> |
> || Hello oVirt guru`s !
> ||
> || How can I to add RAM to Hosted Engine VM?
> || Solution from "Fix: The recovery flow is:..." in
> || https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
> ||
> || oVirt Engine Version: 4.0.3-1.el7.centos
> || _______________________________________________
> || Users mailing list
> || Users(a)ovirt.org
> | | http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:29 p.m.
Thank you all for the information.
I made a small wiki article [for the Russian-speaking oVirt users]
https://wiki.it-kb.ru/ovirt/ovirt-kvm-how-to-add-ram-memory-to-hosted-eng...
25.09.2016, 09:15, "Doron Fediuck" <dfediuck(a)redhat.com>:
The right way is simply to edit the hosted engine VM memory settings
from the admin UI.
The file is not meant to be edited and may lead to issues in your setup.
On Sat, Sep 24, 2016 at 7:57 PM, <aleksey.maksimov(a)it-kb.ru> wrote:
> My HE VM stored on FC Storage
>
> 24.09.2016, 19:51, "Logan Kuhn" <logank(a)wolfram.com>:
>> Sorry hit send too quickly.
>>
>> Move the shared storage version out of the way if you can. In my instance it was
just an NFS volume so it wasn't too hard to move it.
>>
>> Regards,
>> Logan
>>
>> ----- On Sep 24, 2016, at 11:50 AM, Logan Kuhn logank(a)wolfram.com wrote:
>>
>> | I believe you can do it by editing this file:
>> | /var/run/ovirt-hosted-engine-ha/vm.conf and then restarting the vm
>> |
>> | Regards,
>> | Logan
>> |
>> | ----- On Sep 24, 2016, at 10:13 AM, aleksey maksimov aleksey.maksimov(a)it-kb.ru
>> | wrote:
>> |
>> || Hello oVirt guru`s !
>> ||
>> || How can I to add RAM to Hosted Engine VM?
>> || Solution from "Fix: The recovery flow is:..." in
>> || https://bugzilla.redhat.com/show_bug.cgi?id=1309572 not working.
>> ||
>> || oVirt Engine Version: 4.0.3-1.el7.centos
>> || _______________________________________________
>> || Users mailing list
>> || Users(a)ovirt.org
>> | | http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
2981
days inactive
2983
days old
11 comments
7 participants
participants (7)
-
aleksey.maksimov＠it-kb.ru -
Doron Fediuck -
Gianluca Cecchi -
Logan Kuhn -
Roy Golan -
Sandro Bonazzola -
Simone Tiraboschi