[Users] bug with ovirt nightlies and engine-setup-2 script
* * Hi, I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables: -A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't). So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work. Log file - enclosed. Hetz
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "users@oVirt.org" <users@ovirt.org> Cc: "Sandro Bonazzola" <sbonazzo@redhat.com>, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
Thanks for the patch. I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually? תודה, *חץ בן חמו* "*חץ ביז <http://www.hetz.biz>*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו <http://vps-consulting.info> [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * * 2013/7/17 Alon Bar-Lev <alonbl@redhat.com>
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "users@oVirt.org" <users@ovirt.org> Cc: "Sandro Bonazzola" <sbonazzo@redhat.com>, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: "users@oVirt.org" <users@ovirt.org>, "Sandro Bonazzola" <sbonazzo@redhat.com> Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script
Thanks for the patch.
I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?
Is it clean installation? If it does, try to clean database first using engine-cleanup-2.
תודה, *חץ בן חמו* "*חץ ביז <http://www.hetz.biz>*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו <http://vps-consulting.info> [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * *
2013/7/17 Alon Bar-Lev <alonbl@redhat.com>
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "users@oVirt.org" <users@ovirt.org> Cc: "Sandro Bonazzola" <sbonazzo@redhat.com>, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of engine-setup-2 (in the Setup Validation), I got this message. btw I'm on the irc there, look at the window ;) תודה, *חץ בן חמו* "*חץ ביז <http://www.hetz.biz>*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו <http://vps-consulting.info> [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * * 2013/7/17 Alon Bar-Lev <alonbl@redhat.com>
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: "users@oVirt.org" <users@ovirt.org>, "Sandro Bonazzola" < sbonazzo@redhat.com> Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script
Thanks for the patch.
I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?
Is it clean installation? If it does, try to clean database first using engine-cleanup-2.
תודה, *חץ בן חמו* "*חץ ביז <http://www.hetz.biz>*"- שרותי פרילאנס לניהול ותחזוקת שרתי
ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו <http://vps-consulting.info> [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * *
2013/7/17 Alon Bar-Lev <alonbl@redhat.com>
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "users@oVirt.org" <users@ovirt.org> Cc: "Sandro Bonazzola" <sbonazzo@redhat.com>, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script.
it
detects the plugin, and I'm using the iptables option. problem is
Linux that it
writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 12:00:52 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of engine-setup-2 (in the Setup Validation), I got this message.
Hi , you have a taskcleaner.sh utility under the dbutils directory that can help you to clean those tasks
btw I'm on the irc there, look at the window ;)
תודה, חץ בן חמו " חץ ב י ז "- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "Alon Bar-Lev" < alonbl@redhat.com > Cc: "users@oVirt.org" < users@ovirt.org >, "Sandro Bonazzola" < sbonazzo@redhat.com > Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script
Thanks for the patch.
I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?
Is it clean installation? If it does, try to clean database first using engine-cleanup-2.
תודה, *חץ בן חמו* "*חץ ביז < http://www.hetz.biz >*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו < http://vps-consulting.info > [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * *
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "users@oVirt.org" < users@ovirt.org > Cc: "Sandro Bonazzola" < sbonazzo@redhat.com >, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
----- Original Message -----
From: "Eli Mesika" <emesika@redhat.com> To: "Hetz Ben Hamo" <hetz@hetz.biz> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 12:06:38 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 12:00:52 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of engine-setup-2 (in the Setup Validation), I got this message.
Hi , you have a taskcleaner.sh utility under the dbutils directory that can help you to clean those tasks
happened to me as well, if the above didn't help try removing ~/ovirt-engine dir and try again.
btw I'm on the irc there, look at the window ;)
תודה, חץ בן חמו " חץ ב י ז "- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "Alon Bar-Lev" < alonbl@redhat.com > Cc: "users@oVirt.org" < users@ovirt.org >, "Sandro Bonazzola" < sbonazzo@redhat.com > Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script
Thanks for the patch.
I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?
Is it clean installation? If it does, try to clean database first using engine-cleanup-2.
תודה, *חץ בן חמו* "*חץ ביז < http://www.hetz.biz >*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו < http://vps-consulting.info > [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * *
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "users@oVirt.org" < users@ovirt.org > Cc: "Sandro Bonazzola" < sbonazzo@redhat.com >, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
----- Original Message -----
From: "Omer Frenkel" <ofrenkel@redhat.com> To: "Eli Mesika" <emesika@redhat.com>, "Hetz Ben Hamo" <hetz@hetz.biz> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 9:20:02 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
----- Original Message -----
From: "Eli Mesika" <emesika@redhat.com> To: "Hetz Ben Hamo" <hetz@hetz.biz> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 12:06:38 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
----- Original Message -----
From: "Hetz Ben Hamo" <hetz@hetz.biz> To: "Alon Bar-Lev" <alonbl@redhat.com> Cc: "users@oVirt.org" <users@ovirt.org> Sent: Thursday, July 18, 2013 12:00:52 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script
I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of engine-setup-2 (in the Setup Validation), I got this message.
Hi , you have a taskcleaner.sh utility under the dbutils directory that can help you to clean those tasks
happened to me as well, if the above didn't help try removing ~/ovirt-engine dir and try again.
Hi, This was not development environment. The problem was that it was a dirty system so setup assume this is an upgrade and tried to access database at early stage. Thanks for everyone help, Alon
btw I'm on the irc there, look at the window ;)
תודה, חץ בן חמו " חץ ב י ז "- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "Alon Bar-Lev" < alonbl@redhat.com > Cc: "users@oVirt.org" < users@ovirt.org >, "Sandro Bonazzola" < sbonazzo@redhat.com > Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script
Thanks for the patch.
I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?
Is it clean installation? If it does, try to clean database first using engine-cleanup-2.
תודה, *חץ בן חמו* "*חץ ביז < http://www.hetz.biz >*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו < http://vps-consulting.info > [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * *
2013/7/17 Alon Bar-Lev < alonbl@redhat.com >
----- Original Message -----
From: "Hetz Ben Hamo" < hetz@hetz.biz > To: "users@oVirt.org" < users@ovirt.org > Cc: "Sandro Bonazzola" < sbonazzo@redhat.com >, alonbl@redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script
* * Hi,
I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables:
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT
iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).
Confirmed, thanks! Patch is available[1].
So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.
You can select no firewall to workaround this.
Log file - enclosed.
Hetz
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (4)
-
Alon Bar-Lev -
Eli Mesika -
Hetz Ben Hamo -
Omer Frenkel