Hi all - trying to evaluate ovirt and having real problems with getting a self contained install running. I've followed the Quickstart guide at: http://www.ovirt.org/Download word for word using a fresh CentOS 6.4 install with all updates applied on a Intel based PC with 8GB Ram and two nics. It seems to all go well but when I get into the web interface, none of the storage is initially visible, neither the ISO_DOMAIN nor the local storage. Oddly if I refresh the browser (firefox & chrome) while on the storage page the ISO_DOMAIN appears but can't be attached to a datacenter - "None Available" If I go into the host page the host is there but not finished configuring. The network setup is unfinished, the management interface is not attached to a NIC. If I attach it to the active nic (NIC 0) it throws an exception on Save. I can attach it to nic 1 but its not actually hooked up to anything. I have successfully installed and run proxmox on this pc, so don;t think there are hardware problems. On a related note - I've also been trying to test ovirt at home, which means running it on KVM (setup with virt-manager). CentOS installs fine but on reboot just goes to a black screen with the hour glass. If anyone has suggestions on how to get past that it would help my test config a lot :) Host machine is Kubuntu 13.10. Thanks, _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com>> wrote: On 11/14/2013 03:51 PM, Lindsay Mathieson wrote: Hi all - trying to evaluate ovirt and having real problems with getting a self contained install running. I've followed the Quickstart guide at: any errors in the setup logs? in engine logs? Could you point me to the log locations? thanks -- Lindsay

I ran that, large number of logs collected - any ones in particualr you want to see? the sos.log consists of this: 2013-11-15 13:49:51,373 INFO: could not run command: /usr/bin/systool -v -c -b scsi 2013-11-15 13:49:53,699 INFO: error copying file /sys/bus/scsi/uevent (IOError) 2013-11-15 13:49:53,701 INFO: error copying file /sys/bus/scsi/drivers/sr/uevent (IOError) 2013-11-15 13:49:53,701 INFO: error copying file /sys/bus/scsi/drivers/sr/unbind (IOError) 2013-11-15 13:49:53,702 INFO: error copying file /sys/bus/scsi/drivers/sr/bind (IOError) 2013-11-15 13:49:53,702 INFO: error copying file /sys/bus/scsi/drivers_probe (IOError) 2013-11-15 13:49:54,113 INFO: could not run command: /usr/bin/cpufreq-info 2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c fc_host -v 2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c scsi_host -v 2013-11-15 13:49:55,215 INFO: error copying file /sys/module/ipmi_si/parameters/hotmod (IOError) 2013-11-15 13:49:55,232 INFO: error copying file /sys/module/md_mod/parameters/new_array (IOError) 2013-11-15 13:49:55,239 INFO: error copying file /sys/module/libfcoe/parameters/disable (IOError) 2013-11-15 13:49:55,239 INFO: error copying file /sys/module/libfcoe/parameters/enable (IOError) 2013-11-15 13:49:55,240 INFO: error copying file /sys/module/libfcoe/parameters/destroy (IOError) 2013-11-15 13:49:55,240 INFO: error copying file /sys/module/libfcoe/parameters/create_vn2vn (IOError) 2013-11-15 13:49:55,240 INFO: error copying file /sys/module/libfcoe/parameters/create (IOError) 2013-11-15 13:49:55,241 INFO: error copying file /sys/module/fcoe/parameters/disable (IOError) 2013-11-15 13:49:55,241 INFO: error copying file /sys/module/fcoe/parameters/enable (IOError) 2013-11-15 13:49:55,241 INFO: error copying file /sys/module/fcoe/parameters/destroy (IOError) 2013-11-15 13:49:55,241 INFO: error copying file /sys/module/fcoe/parameters/create (IOError) 2013-11-15 13:49:56,085 INFO: could not run command: /usr/sbin/dkms status NB:This was run in a XenServer VM so Host virtulisation and the all-in-one plugine weren't possible. On 15 November 2013 10:40, Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com>> wrote: On 11/14/2013 07:17 PM, Lindsay Mathieson wrote: On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com> <mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote: On 11/14/2013 03:51 PM, Lindsay Mathieson wrote: Hi all - trying to evaluate ovirt and having real problems with getting a self contained install running. I've followed the Quickstart guide at: any errors in the setup logs? in engine logs? Could you point me to the log locations? thanks -- Lindsay i don't remember them of the top of my head, but you can run the engine-log-collector and it will collec them for you. sandro - any wiki on troubleshooting/log locations? -- Lindsay

On 15 November 2013 15:51, Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com>> wrote: oh, was nested virt enabled? this is an all in one deployment, right? it needs VT extensions to work. you pasted the errors of the sos.log, not the content of the zip I've been testing in a mix of environments between home and work :) My oriignaltest was with real hardware but thats not available right now. This latest was on XenServer, so I don't think kvm can run nested on that. I was just trying the management interface out - I presumed the storage etc could be setup without a hostnode attached.

I'd do nested virt at home, CentOS installs via virt-manager fine, but just displays a black screen on startup.

thanks, -- Lindsay

On 15 November 2013 16:20, Itamar Heim wrote: > you can install the engine as a VM, but the download describes deploying the > all-in-one plugin - that deployes engine+vdsm(host) on same box. Yah, the plug was disabled as no kvm available. I thought the all-in-one was optional for that guide?

On 11/14/2013 07:17 PM, Lindsay Mathieson wrote: > On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com > <mailto:iheim@redhat.com>> wrote: > > On 11/14/2013 03:51 PM, Lindsay Mathieson wrote: > > Hi all - trying to evaluate ovirt and having real problems with > getting a self > contained install running. > > I've followed the Quickstart guide at: > > any errors in the setup logs? in engine logs? > > > > Could you point me to the log locations? > > thanks > > -- > Lindsay i don't remember them of the top of my head, but you can run the engine-log-collector and it will collec them for you. sandro - any wiki on troubleshooting/log locations?