5:32 p.m.
Hello,
I am getting an error trying to add a "host" to oVirt where the Status says
"Install Failed"
Here is (a snipet ) the log from the oVirt server
(/var/log/ovirt/enginge.log)...I can provide more if needed
*===================================oVirt Server:
/var/log/ovirt/enginge.log=====================================
.
.
.
2012-04-13 08:16:08,182 ERROR
[org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8443-4)
[78088565] Cannot get vdsManager for
vdsid=9858f044-857b-11e1-b0d6-0016367ecdf0
2012-04-13 08:16:08,183 INFO
[org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand]
(http--0.0.0.0-8443-4) [78088565] START, RemoveVdsVDSCommand(vdsId =
9858f044-857b-11e1-b0d6-0016367ecdf0), log id: 6ff05534
2012-04-13 08:16:08,183 ERROR
[org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8443-4)
[78088565] Cannot get vdsManager for
vdsid=9858f044-857b-11e1-b0d6-0016367ecdf0
2012-04-13 08:16:08,184 INFO
[org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand]
(http--0.0.0.0-8443-4) [78088565] FINISH, RemoveVdsVDSCommand, log id:
6ff05534
2012-04-13 08:16:08,185 ERROR
[org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8443-4)
[78088565] Cannot get vdsManager for
vdsid=9858f044-857b-11e1-b0d6-0016367ecdf0
2012-04-13 08:16:08,185 INFO
[org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8443-4)
[78088565] START, AddVdsVDSCommand(vdsId =
9858f044-857b-11e1-b0d6-0016367ecdf0), log id: b6a0256
.
.
.
2012-04-13 08:16:19,057 INFO
[org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper]
(pool-5-thread-25) Invoking chmod +x
/tmp/vds_installer_2cf4050c-995f-41b2-8b5b-c03dc7efd206.py;
/tmp/vds_installer_2cf4050c-995f-41b2-8b5b-c03dc7efd206.py -c
'ssl=true;management_port=54321' -O '4over' -t 2012-04-13T15:16:08 -p
8080
-b -v http://ovirt.4over.com:8080/Components/vds/
http://ovirt.4over.com:8080/Components/vds/
bluejay.ovirt.4over.com2cf4050c-995f-41b2-8b5b-c03dc7efd206 False on
bluejay.ovirt.4over.com
2012-04-13 08:16:20,058 INFO [org.ovirt.engine.core.bll.VdsInstaller]
(pool-5-thread-25) [5a7938cc] Installation of bluejay.ovirt.4over.com.
Recieved message: <BSTRAP component='INSTALLER' status='OK'
message='Test
platform succeeded'/>
<BSTRAP component='INSTALLER LIB' status='OK' message='Install
library
already exists'/>
<BSTRAP component='INSTALLER' status='OK'
message='vds_bootstrap.py
download succeeded'/>
. FYI. (Stage: Running first installation script on Host)
2012-04-13 08:16:43,865 ERROR [org.ovirt.engine.core.bll.VdsInstaller]
(pool-5-thread-25) [5a7938cc] Installation of bluejay.ovirt.4over.com.
Recieved message: <BSTRAP component='RHN_REGISTRATION' status='OK'
message='Host properly registered with RHN/Satellite.'/>
<BSTRAP component='VDSM_MAJOR_VER' status='OK' message='Available
VDSM
matches requirements'/>
<BSTRAP component='VT_SVM' status='FAIL' processor='Intel'
message='Server
does not support virtualization'/>
<BSTRAP component='RHEV_INSTALL' status='FAIL'/>
. Error occured. (Stage: Running first installation script on Host)
2012-04-13 08:16:43,959 INFO
[org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper]
(pool-5-thread-25) RunSSHCommand returns true
2012-04-13 08:16:43,960 INFO [org.ovirt.engine.core.bll.VdsInstaller]
(pool-5-thread-25) [5a7938cc] RunScript ended:true
======================================================================================================
*
I checked on the host itself and it seems like I do have an Intel Hardware
Virt on the server (wasn't a surprise since I BOUGHT it that way...but
still checked)
*========================================= Node: /proc/cpuinfo
=============================================*
*[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor
ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts
tpr_shadow vnmi flexpriority*
*
======================================================================================================
*
Some things to note...
On the Node (under the /etc/vdsm/vdsm.conf file) I have the "fake_kvm_support
= true" to see if that would make the node install (didn't work)...also I
have "ssl = false" to see if it might be a cert error (still didn't work).
And, yes, I've even tried removing and adding the node again...still no
luck =\
What are my next steps? Any help would be greatly appreciated!
--Christian
6:52 p.m.
On 04/13/2012 06:32 PM, Christian Hernandez wrote:
Hello,
I am getting an error trying to add a "host" to oVirt where the Status
says "Install Failed"
Here is (a snipet ) the log from the oVirt server
(/var/log/ovirt/enginge.log)...I can provide more if needed
/===================================oVirt Server:
...
<BSTRAP component='VT_SVM' status='FAIL'
processor='Intel'
message='Server does not support virtualization'/>
this is causing the host to fail install.
...
/
I checked on the host itself and it seems like I do have an Intel
Hardware Virt on the server (wasn't a surprise since I BOUGHT it that
way...but still checked)
are you sure it is enabled at bios level?
did you perform a cold boot post changing it?
/========================================= Node: /proc/cpuinfo
=============================================/
/[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm
dts tpr_shadow vnmi flexpriority/
/======================================================================================================/
Some things to note...
On the Node (under the /etc/vdsm/vdsm.conf file) I have the
"fake_kvm_support = true" to see if that would make the node install
(didn't work)...also I have "ssl = false" to see if it might be a cert
error (still didn't work).
is this an ovirt node or regular fedora?
And, yes, I've even tried removing and adding the node again...still no
luck =\
What are my next steps? Any help would be greatly appreciated!
--Christian
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:58 p.m.
are you sure it is enabled at bios level?
did you perform a cold boot post changing it?
I am using CentOS 6.2 on both oVirt server and Host client
And IN FACT you are right; I looked in the BIOS and it was disabled! The
node was added successfully now; thank you
--Christian
On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim <iheim(a)redhat.com> wrote:
> On 04/13/2012 06:32 PM, Christian Hernandez wrote:
>
>> Hello,
>>
>> I am getting an error trying to add a "host" to oVirt where the Status
>> says "Install Failed"
>>
>> Here is (a snipet ) the log from the oVirt server
>> (/var/log/ovirt/enginge.log)..**.I can provide more if needed
>>
>> /=============================**======oVirt Server:
>>
> ...
>
>
> <BSTRAP component='VT_SVM' status='FAIL'
processor='Intel'
>> message='Server does not support virtualization'/>
>>
>
> this is causing the host to fail install.
>
> ...
>
> /
>>
>> I checked on the host itself and it seems like I do have an Intel
>> Hardware Virt on the server (wasn't a surprise since I BOUGHT it that
>> way...but still checked)
>>
>
are you sure it is enabled at bios level?
did you perform a cold boot post changing it?
>
>
>> /=============================**============ Node: /proc/cpuinfo
>> ==============================**===============/
>>
>> /[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
>>
>> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov
>> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm
>> constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64
>> monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm
>> dts tpr_shadow vnmi flexpriority/
>>
>> /=============================**==============================**
>> ==============================**=============/
>>
>>
>> Some things to note...
>>
>> On the Node (under the /etc/vdsm/vdsm.conf file) I have the
>> "fake_kvm_support = true" to see if that would make the node install
>> (didn't work)...also I have "ssl = false" to see if it might be a
cert
>> error (still didn't work).
>>
>
> is this an ovirt node or regular fedora?
>
>
>> And, yes, I've even tried removing and adding the node again...still no
>> luck =\
>>
>> What are my next steps? Any help would be greatly appreciated!
>>
>> --Christian
>>
>>
>> ______________________________**_________________
>> Users mailing list
>> Users(a)ovirt.org
>>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>>
>
>
7 p.m.
On 04/13/2012 07:58 PM, Christian Hernandez wrote:
> are you sure it is enabled at bios level?
> did you perform a cold boot post changing it?
I am using CentOS 6.2 on both oVirt server and Host client
And IN FACT you are right; I looked in the BIOS and it was disabled! The
node was added successfully now; thank you
can you please check what did the error show in the engine when standing
on the host in install failed status (under the subtab of events) - if
you didn't remove the host and just re-installed it should still be
there, or in the main events tab?
thanks,
Itamar
--Christian
On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>> wrote:
On 04/13/2012 06:32 PM, Christian Hernandez wrote:
Hello,
I am getting an error trying to add a "host" to oVirt where the
Status
says "Install Failed"
Here is (a snipet ) the log from the oVirt server
(/var/log/ovirt/enginge.log)..__.I can provide more if needed
/=============================__======oVirt Server:
...
<BSTRAP component='VT_SVM' status='FAIL'
processor='Intel'
message='Server does not support virtualization'/>
this is causing the host to fail install.
...
/
I checked on the host itself and it seems like I do have an Intel
Hardware Virt on the server (wasn't a surprise since I BOUGHT it
that
way...but still checked)
are you sure it is enabled at bios level?
did you perform a cold boot post changing it?
/=============================__============ Node: /proc/cpuinfo
==============================__===============/
/[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge
mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave
lahf_lm
dts tpr_shadow vnmi flexpriority/
/=============================__==============================__==============================__=============/
Some things to note...
On the Node (under the /etc/vdsm/vdsm.conf file) I have the
"fake_kvm_support = true" to see if that would make the node install
(didn't work)...also I have "ssl = false" to see if it might be
a cert
error (still didn't work).
is this an ovirt node or regular fedora?
And, yes, I've even tried removing and adding the node
again...still no
luck =\
What are my next steps? Any help would be greatly appreciated!
--Christian
_________________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/__mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
7:07 p.m.
The error was in the /tmp/vds_bootstrap.675074.log on the host
*
Fri, 13 Apr 2012 09:26:48 DEBUG **** Start VDS Validation ****
Fri, 13 Apr 2012 09:26:48 DEBUG Entered VdsValidation(subject = '
bluejay.ovirt.4over.com', random_num =
'7952f4a3-a7cd-4a46-8dbc-0b3f5b201102', rev_num = 'None',
installVirtualizationService = 'True', installGlusterService = 'False')
Fri, 13 Apr 2012 09:26:48 DEBUG Setting up Package Sacks
Fri, 13 Apr 2012 09:26:48 DEBUG yumSearch: found vdsm entries:
[<YumAvailablePackageSqlite : vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64
(0x29bee50)>]
Fri, 13 Apr 2012 09:26:48 DEBUG Host properly registered with
RHN/Satellite.
Fri, 13 Apr 2012 09:26:48 DEBUG <BSTRAP component='RHN_REGISTRATION'
status='OK' message='Host properly registered with RHN/Satellite.'/>
Fri, 13 Apr 2012 09:26:49 DEBUG yumSearchVersion: pkg
vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64 starts with: vdsm-4.9
Fri, 13 Apr 2012 09:26:49 DEBUG Available VDSM matches requirements
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='VDSM_MAJOR_VER'
status='OK' message='Available VDSM matches requirements'/>
Fri, 13 Apr 2012 09:26:49 DEBUG virtExplorer testing
Fri, 13 Apr 2012 09:26:49 DEBUG CPU vendor is GenuineIntel
Fri, 13 Apr 2012 09:26:49 DEBUG virt support in cpu: True, in bios: False
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='VT_SVM'
status='FAIL'
processor='Intel' message='Server does not support virtualization'/>
Fri, 13 Apr 2012 09:26:49 ERROR virtExplorer test failed
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='RHEV_INSTALL'
status='FAIL'/>
Fri, 13 Apr 2012 09:26:49 DEBUG **** End VDS Validation ****
*
On Fri, Apr 13, 2012 at 10:00 AM, Itamar Heim <iheim(a)redhat.com> wrote:
On 04/13/2012 07:58 PM, Christian Hernandez wrote:
> > are you sure it is enabled at bios level?
> > did you perform a cold boot post changing it?
>
> I am using CentOS 6.2 on both oVirt server and Host client
>
> And IN FACT you are right; I looked in the BIOS and it was disabled! The
> node was added successfully now; thank you
>
can you please check what did the error show in the engine when standing
on the host in install failed status (under the subtab of events) - if you
didn't remove the host and just re-installed it should still be there, or
in the main events tab?
thanks,
Itamar
>
> --Christian
>
>
> On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim <iheim(a)redhat.com
> <mailto:iheim@redhat.com>> wrote:
>
> On 04/13/2012 06:32 PM, Christian Hernandez wrote:
>
> Hello,
>
> I am getting an error trying to add a "host" to oVirt where the
> Status
> says "Install Failed"
>
> Here is (a snipet ) the log from the oVirt server
> (/var/log/ovirt/enginge.log)..**__.I can provide more if needed
>
> /=============================**__======oVirt Server:
>
>
> ...
>
>
> <BSTRAP component='VT_SVM' status='FAIL'
processor='Intel'
> message='Server does not support virtualization'/>
>
>
> this is causing the host to fail install.
>
> ...
>
> /
>
> I checked on the host itself and it seems like I do have an Intel
> Hardware Virt on the server (wasn't a surprise since I BOUGHT it
> that
> way...but still checked)
>
>
> are you sure it is enabled at bios level?
> did you perform a cold boot post changing it?
>
>
> /=============================**__============ Node: /proc/cpuinfo
> ==============================**__===============/
>
>
> /[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo | sort -u
>
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge
> mca cmov
> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
> syscall nx lm
> constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64
> monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave
> lahf_lm
> dts tpr_shadow vnmi flexpriority/
>
> /=============================**__============================**
> ==__==========================**====__=============/
>
>
>
> Some things to note...
>
> On the Node (under the /etc/vdsm/vdsm.conf file) I have the
> "fake_kvm_support = true" to see if that would make the node
> install
> (didn't work)...also I have "ssl = false" to see if it might be
> a cert
> error (still didn't work).
>
>
> is this an ovirt node or regular fedora?
>
>
> And, yes, I've even tried removing and adding the node
> again...still no
> luck =\
>
> What are my next steps? Any help would be greatly appreciated!
>
> --Christian
>
>
> ______________________________**___________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
>
http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.o...
>
<http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
> >
>
>
>
>
>
>
> ______________________________**_________________
> Users mailing list
> Users(a)ovirt.org
>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>
7:53 p.m.
On 04/13/2012 08:07 PM, Christian Hernandez wrote:
The error was in the /tmp/vds_bootstrap.675074.log on the host
thanks, but i'm asking about the events tab in the GUI (someplace a user
can see without digging out in the logs)
/
Fri, 13 Apr 2012 09:26:48 DEBUG **** Start VDS Validation ****
Fri, 13 Apr 2012 09:26:48 DEBUG Entered VdsValidation(subject =
'bluejay.ovirt.4over.com <http://bluejay.ovirt.4over.com>';, random_num =
'7952f4a3-a7cd-4a46-8dbc-0b3f5b201102', rev_num = 'None',
installVirtualizationService = 'True', installGlusterService = 'False')
Fri, 13 Apr 2012 09:26:48 DEBUG Setting up Package Sacks
Fri, 13 Apr 2012 09:26:48 DEBUG yumSearch: found vdsm entries:
[<YumAvailablePackageSqlite : vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64
(0x29bee50)>]
Fri, 13 Apr 2012 09:26:48 DEBUG Host properly registered with
RHN/Satellite.
Fri, 13 Apr 2012 09:26:48 DEBUG <BSTRAP component='RHN_REGISTRATION'
status='OK' message='Host properly registered with RHN/Satellite.'/>
Fri, 13 Apr 2012 09:26:49 DEBUG yumSearchVersion: pkg
vdsm-4.9.6-0.53.gitd2dab50.el6.x86_64 starts with: vdsm-4.9
Fri, 13 Apr 2012 09:26:49 DEBUG Available VDSM matches requirements
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='VDSM_MAJOR_VER'
status='OK' message='Available VDSM matches requirements'/>
Fri, 13 Apr 2012 09:26:49 DEBUG virtExplorer testing
Fri, 13 Apr 2012 09:26:49 DEBUG CPU vendor is GenuineIntel
Fri, 13 Apr 2012 09:26:49 DEBUG * virt support in cpu: True, in bios:
False*
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='VT_SVM'
status='FAIL'
processor='Intel' message='Server does not support virtualization'/>
Fri, 13 Apr 2012 09:26:49 ERROR virtExplorer test failed
Fri, 13 Apr 2012 09:26:49 DEBUG <BSTRAP component='RHEV_INSTALL'
status='FAIL'/>
Fri, 13 Apr 2012 09:26:49 DEBUG **** End VDS Validation ****
/
On Fri, Apr 13, 2012 at 10:00 AM, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>> wrote:
On 04/13/2012 07:58 PM, Christian Hernandez wrote:
> are you sure it is enabled at bios level?
> did you perform a cold boot post changing it?
I am using CentOS 6.2 on both oVirt server and Host client
And IN FACT you are right; I looked in the BIOS and it was
disabled! The
node was added successfully now; thank you
can you please check what did the error show in the engine when
standing on the host in install failed status (under the subtab of
events) - if you didn't remove the host and just re-installed it
should still be there, or in the main events tab?
thanks,
Itamar
--Christian
On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>
<mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote:
On 04/13/2012 06:32 PM, Christian Hernandez wrote:
Hello,
I am getting an error trying to add a "host" to oVirt
where the
Status
says "Install Failed"
Here is (a snipet ) the log from the oVirt server
(/var/log/ovirt/enginge.log)..____.I can provide more if
needed
/=============================____======oVirt Server:
...
<BSTRAP component='VT_SVM' status='FAIL'
processor='Intel'
message='Server does not support virtualization'/>
this is causing the host to fail install.
...
/
I checked on the host itself and it seems like I do have
an Intel
Hardware Virt on the server (wasn't a surprise since I
BOUGHT it
that
way...but still checked)
are you sure it is enabled at bios level?
did you perform a cold boot post changing it?
/=============================____============ Node:
/proc/cpuinfo
==============================____===============/
/[root@bluejay ~]# egrep --color 'svm|vmx' /proc/cpuinfo
| sort -u
flags : fpu vme de pse tsc msr pae mce cx8 apic
mtrr pge
mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm
constant_tsc arch_perfmon pebs bts rep_good aperfmperf
pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca
sse4_1 xsave
lahf_lm
dts tpr_shadow vnmi flexpriority/
/=============================____============================__==__==========================__====__=============/
Some things to note...
On the Node (under the /etc/vdsm/vdsm.conf file) I have the
"fake_kvm_support = true" to see if that would make the node install
(didn't work)...also I have "ssl = false" to see if it
might be
a cert
error (still didn't work).
is this an ovirt node or regular fedora?
And, yes, I've even tried removing and adding the node
again...still no
luck =\
What are my next steps? Any help would be greatly
appreciated!
--Christian
___________________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org
<mailto:Users@ovirt.org>>
http://lists.ovirt.org/____mailman/listinfo/users
<http://lists.ovirt.org/__mailman/listinfo/users>
<http://lists.ovirt.org/__mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>>
_________________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/__mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4388
days inactive
4389
days old
5 comments
2 participants
participants (2)
-
Christian Hernandez -
Itamar Heim