12:55 p.m.
Hi,
I have an old oVirt 3.2 setup and I have to change the ip address of the
data storage domain (NFS). Even if I shut down all vms I can't detach
the data storage domain and reimport it as vms and templates are
configured in oVirt which have their disk on this storage domain.
Is there a way to change the ip? Maybe using the database?
Would this be possible in 3.3 or 3.4?
Thanks a lot for tips!
--
Best Regards
René Koch
Senior Solution Architect
============================================
LIS-Linuxland GmbH
Brünner Straße 163, A-1210 Vienna
Phone: +43 1 236 91 60
Mobile: +43 660 / 512 21 31
E-Mail: rkoch(a)linuxland.at
============================================
1:31 p.m.
HI Rene,
I think you can change it in table storage_server_connections
-John
On Wed, Mar 19, 2014 at 12:55 PM, René Koch <rkoch(a)linuxland.at> wrote:
Hi,
I have an old oVirt 3.2 setup and I have to change the ip address of the
data storage domain (NFS). Even if I shut down all vms I can't detach the
data storage domain and reimport it as vms and templates are configured in
oVirt which have their disk on this storage domain.
Is there a way to change the ip? Maybe using the database?
Would this be possible in 3.3 or 3.4?
Thanks a lot for tips!
--
Best Regards
René Koch
Senior Solution Architect
============================================
LIS-Linuxland GmbH
Brünner Straße 163, A-1210 Vienna
Phone: +43 1 236 91 60
Mobile: +43 660 / 512 21 31
E-Mail: rkoch(a)linuxland.at
============================================
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:01 p.m.
It's a rare occasion, but shouldn't this be editable from the web interface?
On Wed, Mar 19, 2014 at 6:31 PM, John Taylor <jtt77777(a)gmail.com> wrote:
HI Rene,
I think you can change it in table storage_server_connections
-John
On Wed, Mar 19, 2014 at 12:55 PM, René Koch <rkoch(a)linuxland.at> wrote:
> Hi,
>
> I have an old oVirt 3.2 setup and I have to change the ip address of the
> data storage domain (NFS). Even if I shut down all vms I can't detach the
> data storage domain and reimport it as vms and templates are configured
in
> oVirt which have their disk on this storage domain.
>
> Is there a way to change the ip? Maybe using the database?
> Would this be possible in 3.3 or 3.4?
>
> Thanks a lot for tips!
>
>
> --
> Best Regards
>
> René Koch
> Senior Solution Architect
>
> ============================================
> LIS-Linuxland GmbH
> Brünner Straße 163, A-1210 Vienna
>
> Phone: +43 1 236 91 60
> Mobile: +43 660 / 512 21 31
> E-Mail: rkoch(a)linuxland.at
> ============================================
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Met vriendelijke groeten / With kind regards,
Johan Kooijman
T +31(0) 6 43 44 45 27
F +31(0) 162 82 00 01
E mail(a)johankooijman.com
3:24 p.m.
Yes, Johan, I should have pointed that out
http://www.ovirt.org/Features/Manage_Storage_Connections
is feature page for storage connections management. I think it landed in 3.3
http://www.ovirt.org/OVirt_3.3_release-management
On Wed, Mar 19, 2014 at 3:01 PM, Johan Kooijman <mail(a)johankooijman.com> wrote:
It's a rare occasion, but shouldn't this be editable from the
web interface?
On Wed, Mar 19, 2014 at 6:31 PM, John Taylor <jtt77777(a)gmail.com> wrote:
>
> HI Rene,
> I think you can change it in table storage_server_connections
>
> -John
>
>
>
> On Wed, Mar 19, 2014 at 12:55 PM, René Koch <rkoch(a)linuxland.at> wrote:
> > Hi,
> >
> > I have an old oVirt 3.2 setup and I have to change the ip address of the
> > data storage domain (NFS). Even if I shut down all vms I can't detach
> > the
> > data storage domain and reimport it as vms and templates are configured
> > in
> > oVirt which have their disk on this storage domain.
> >
> > Is there a way to change the ip? Maybe using the database?
> > Would this be possible in 3.3 or 3.4?
> >
> > Thanks a lot for tips!
> >
> >
> > --
> > Best Regards
> >
> > René Koch
> > Senior Solution Architect
> >
> > ============================================
> > LIS-Linuxland GmbH
> > Brünner Straße 163, A-1210 Vienna
> >
> > Phone: +43 1 236 91 60
> > Mobile: +43 660 / 512 21 31
> > E-Mail: rkoch(a)linuxland.at
> > ============================================
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Met vriendelijke groeten / With kind regards,
Johan Kooijman
T +31(0) 6 43 44 45 27
F +31(0) 162 82 00 01
E mail(a)johankooijman.com
4:05 a.m.
On 03/19/2014 08:24 PM, John Taylor wrote:
Yes, Johan, I should have pointed that out
http://www.ovirt.org/Features/Manage_Storage_Connections
is feature page for storage connections management. I think it landed in 3.3
http://www.ovirt.org/OVirt_3.3_release-management
Thanks a lot for the hint. I never needed to change the IP until now, so
I totally missed this features. In my oVirt 3.4 environment this seem to
be possible (didn't test it as the system is in production).
Unfortunately I can't upgrade this environment from 3.2 to 3.3 (yet).
On Wed, Mar 19, 2014 at 3:01 PM, Johan Kooijman <mail(a)johankooijman.com> wrote:
> It's a rare occasion, but shouldn't this be editable from the web interface?
>
>
> On Wed, Mar 19, 2014 at 6:31 PM, John Taylor <jtt77777(a)gmail.com> wrote:
>>
>> HI Rene,
>> I think you can change it in table storage_server_connections
Do you know if I only have to change it in this table (and maybe restart
oVirt engine) or if there are more steps to do?
Of course I would put the storage domain into maintenance before doing
db changes and reactivate it afterwards to make sure host will mount the
storage from the new I.
>>
>> -John
>>
>>
>>
>> On Wed, Mar 19, 2014 at 12:55 PM, René Koch <rkoch(a)linuxland.at> wrote:
>>> Hi,
>>>
>>> I have an old oVirt 3.2 setup and I have to change the ip address of the
>>> data storage domain (NFS). Even if I shut down all vms I can't detach
>>> the
>>> data storage domain and reimport it as vms and templates are configured
>>> in
>>> oVirt which have their disk on this storage domain.
>>>
>>> Is there a way to change the ip? Maybe using the database?
>>> Would this be possible in 3.3 or 3.4?
>>>
>>> Thanks a lot for tips!
>>>
>>>
>>> --
>>> Best Regards
>>>
>>> René Koch
>>> Senior Solution Architect
>>>
>>> ============================================
>>> LIS-Linuxland GmbH
>>> Brünner Straße 163, A-1210 Vienna
>>>
>>> Phone: +43 1 236 91 60
>>> Mobile: +43 660 / 512 21 31
>>> E-Mail: rkoch(a)linuxland.at
>>> ============================================
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
> Met vriendelijke groeten / With kind regards,
> Johan Kooijman
>
> T +31(0) 6 43 44 45 27
> F +31(0) 162 82 00 01
> E mail(a)johankooijman.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3750
days inactive
3751
days old
4 comments
3 participants
participants (3)
-
Johan Kooijman -
John Taylor -
René Koch