[Users] Ovirt 3.3.3 to 3.3.4 upgrade issues Centos 6
I have tested an upgrade from engine 3.3.3 to 3.3.4 under centos 6. It seems that the vdsm nodes are now showing as non-operational and the only way I have been able to cure this was to: - Upgrade the vdsm version on a node to 4.13.3-4 - install vdsm-gluster - start glusterd service We are only currently using ISCSI. I cannot get a node running vdsm-4.13.3-3 to show as being operational under engine 3.3.4 Has anyone been able to get 3.3.4 functioning with previous version vdsm nodes ? This issue may hinder our progress when it comes time to upgrade our production engine / nodes when putting hosts into maintenance mode and performing migrations etc. Thanks *Gary Lloyd* ---------------------------------- IT Services Keele University -----------------------------------
On 03/19/2014 05:19 PM, Gary Lloyd wrote:
I have tested an upgrade from engine 3.3.3 to 3.3.4 under centos 6. It seems that the vdsm nodes are now showing as non-operational and the only way I have been able to cure this was to:
- Upgrade the vdsm version on a node to 4.13.3-4 - install vdsm-gluster - start glusterd service
Did you check "Enable Gluster Service" for your cluster? If so, you need vdsm-gluster installed on all hosts. If you don't use GlusterFS on your hosts, disable this setting for your cluster. Regards, René
We are only currently using ISCSI. I cannot get a node running vdsm-4.13.3-3 to show as being operational under engine 3.3.4
Has anyone been able to get 3.3.4 functioning with previous version vdsm nodes ?
This issue may hinder our progress when it comes time to upgrade our production engine / nodes when putting hosts into maintenance mode and performing migrations etc.
Thanks
/Gary Lloyd/ ---------------------------------- IT Services Keele University -----------------------------------
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
This issue aside, the new point release should still support older vdsm versions. I haven't done the upgrade in my dev environment yet so I'm glad for the report. Maybe worth filing a BZ (after some more investigation)? Am 19.03.2014 18:15, schrieb René Koch:
Did you check "Enable Gluster Service" for your cluster? If so, you need vdsm-gluster installed on all hosts. If you don't use GlusterFS on your hosts, disable this setting for your cluster.
-- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
participants (3)
-
Gary Lloyd -
René Koch -
Sven Kieske