On Thu, Sep 1, 2016 at 10:45 PM, Bryan Sockel <Bryan.Sockel(a)altn.com&gt; wrote: > Having some issues with my Hosted Engine Appliance, I am able to get it > up and running, and i can access it only from the server that is hosting > it. The host server can ping the appliance, and the appliance can ping the > host server. The host server can ping the rest of my network and get out > to the internet. > > This is a nested setup i am using for testing and poc and is running on a > vmware platform. > I'm not a VMWare expert but I suspect that you forgot enabling the Promiscuous Mode on the vSwitch where your virtual host is connected. vSwitch doesn't implement a MAC Learning algorithm and so only the frame addressed to a well known MAC address (such as the interfaces of host which is running as a VMWare virtual machine) will be sent over the right virtual port, other frames (the ones addressed to the hosted-engine nested VM for instance) will be lost. Promiscuous Mode mode will fix this behavior but of course it will also impact on the performance. > Server IP Config: > > eno16777984: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > ether 00:50:56:01:0d:48 txqueuelen 1000 (Ethernet) > RX packets 572078 bytes 673729777 (642.5 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 342235 bytes 191490802 (182.6 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > loop txqueuelen 0 (Local Loopback) > RX packets 831524 bytes 6927010219 (6.4 GiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 831524 bytes 6927010219 (6.4 GiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > ovirtmgmt: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 10.20.42.3 netmask 255.255.252.0 broadcast 10.20.43.255 > ether 00:50:56:01:0d:48 txqueuelen 0 (Ethernet) > RX packets 957838 bytes 796793041 (759.8 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 795846 bytes 4627811240 (4.3 GiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > ether fe:16:3e:20:fc:a2 txqueuelen 500 (Ethernet) > RX packets 3434 bytes 11065518 (10.5 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 9008 bytes 2493747 (2.3 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > default gw-lab.colo.test 0.0.0.0 UG 0 0 0 > ovirtmgmt > 10.20.40.0 0.0.0.0 255.255.252.0 U 0 0 0 > ovirtmgmt > link-local 0.0.0.0 255.255.0.0 U 1004 0 0 > ovirtmgmt > > > Appliance: > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 10.20.42.17 netmask 255.255.252.0 broadcast 10.20.43.255 > ether 00:16:3e:20:fc:a2 txqueuelen 1000 (Ethernet) > RX packets 9489 bytes 2674331 (2.5 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 3655 bytes 11370881 (10.8 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > loop txqueuelen 0 (Local Loopback) > RX packets 67298 bytes 36550074 (34.8 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 67298 bytes 36550074 (34.8 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > default ovirt1.test.lab 0.0.0.0 UG 100 0 0 > eth0 > 10.20.40.0 0.0.0.0 255.255.252.0 U 100 0 0 > eth0 > > Your server has a different gateway: gw-lab.colo.test

> > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users