From: "Cristian Falcas" <cristi.falcas(a)gmail.com&gt; To: dougsland(a)redhat.com Cc: users(a)ovirt.org Sent: Wednesday, December 5, 2012 10:25:07 PM Subject: Re: [Users] can't add hosts with latest ovirt nightly (3.2) On Wed, Dec 5, 2012 at 8:05 PM, Douglas Landgraf < dougsland(a)redhat.com > wrote: Hi Christian, On 12/05/2012 09:54 AM, Cristian Falcas wrote: Hi, The latest otopi installer is failing with the following error: virtualization support AuthenticAMD (cpu: True, bios: False) and RuntimeError: Hardware does not support virtualization Running rdmsr also says that virtualization is not enabled in bios: ./rdmsr --bitfield 4:4 0xc0010114 0 Is the bios flag mandatory for virtualization? On the same machine virt-manager works and can start virtual machines. oVirt is based on KVM which requires full virtualization (bios flag enabled). In your case, looks like virt-manager is using pure qemu to emulate. I can't check now what is in bios, but I will update with the status when I have a chance to check. Sure. -- Cheers Douglas I checked and I had virtualization enabled in bios. Also, I was mistaken and the result from rdmsr means bios is ok: result is supposed to be 0 (based on kvm-ok script). I did the test with and without virtualization enabled in bios and I got this: - enabled = 00000100 - disabled= 00011000 From internet: Bit 4 of MSR 0xc0010114 returns 0 means virtualization enabled Based on this, I think that the check in /usr/share/ovirt-host-deploy/plugins/ovirt-host-deploy/vdsm/hardware.py it should not be != 0, but: def _svm_enabled_by_bios(self): .... (vm_cr & (1 << SVM_VM_CR_SVM_DISABLE)) == 0 I think the above means (8 & (1 << 4)) which is 0?

Best regards, _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users