Re: change he vm memoy size
Actually, you need to untar the OVF from the shared storage and check the configuration from the tar. Just keep it like that (running ) and tomorrow power down and then up the HostedEngine. Best Regards, Strahil NikolovOn May 30, 2019 12:06, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote:
Hello, Strahil. I've just tried with engine-config -s OvfUpdateIntervalInMinutes=1 systemctl restart ovirt-engine.service After that, i changed Memory Size in manager UI. And waited about 30 minutes. Then checked memSize in /var/run/ovirt-hosted-engine-ha/vm.conf (which if i right understand syncronized with ovf every minute) and saw memSize have not been changed. And Memory Size property (in manager UI) also remains initial. Thus i think that ovf dont changes. I return OvfUpdateIntervalInMinutes=60 and will wait till tomorrow, may be the setting will be magically aplyed.
-- Best regards Alexey
Hi Alexey, How much time did you check before rebooting. I have noticed ,that despite the default OVF update interval of 1 hour, it takes 5-6 hours for the engine to update the OVF.
Best Regards, Strahil Nikolov
On May 30, 2019 10:30, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote:
I try to increase memory of HE VM (oVirt 4.2.8). If i do it from manager UI, i see that hot plug works - new memory devices appear and corresponding memory increase appeares inside engine guest. But 'Memory Size' property of hosted engine (in manager UI) don't reflect that new amount of memory. Also after reboot of engine vm, memory size changes back to initial value. Is it possible to change memory size of HE vm ( as far as i know the settings stored in ovf on HE domain) and how i can make this change to be persistent.
-- Best regards Alexey
_______________________________________________
Users mailing list --
users@ovirt.org
To unsubscribe send an email to
users-leave@ovirt.org
Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IKID3B2TH3VR27...
Hi Alexey, better open a bug for that. If the Description is updated, but after a reboot the engine is still using the old values - it seems that it is a bug. Best Regards,Strahil Nikolov В четвъртък, 30 май 2019 г., 9:26:51 ч. Гринуич-4, Valkov, Alexey <Valkov.Alexey@knauf.ru> написа: Indeed, after edit HE VM settings via manager UI, ovf update triggered immediately (checked in /var/log/ovirt-engine/engine.log).I dumped HE ovf_store and untar <he_vm_id>.ovf fom it.And i checked that all changes i made for Descriprion, MaxMemorySizeMb, minGuaranteedMemoryMb applyed (written to ovf) and remains after reboot. It works as expected.But not for memory or Memory Size - this settings remained initial and not written to ovf. Well, memory hotplug works - via adding new memory devices, but after reboot this memory devices detached but Memory Size not increased. --Best regardsAlexey Actually, you need to untar the OVF from the shared storage and check the configuration from the tar. Just keep it like that (running ) and tomorrow power down and then up the HostedEngine. Best Regards, Strahil Nikolov On May 30, 2019 12:06, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote: Hello, Strahil. I've just tried with engine-config -s OvfUpdateIntervalInMinutes=1 systemctl restart ovirt-engine.service After that, i changed Memory Size in manager UI. And waited about 30 minutes. Then checked memSize in /var/run/ovirt-hosted-engine-ha/vm.conf (which if i right understand syncronized with ovf every minute) and saw memSize have not been changed. And Memory Size property (in manager UI) also remains initial. Thus i think that ovf dont changes. I return OvfUpdateIntervalInMinutes=60 and will wait till tomorrow, may be the setting will be magically aplyed. --Best regardsAlexey Hi Alexey, How much time did you check before rebooting. I have noticed ,that despite the default OVF update interval of 1 hour, it takes 5-6 hours for the engine to update the OVF. Best Regards, Strahil Nikolov On May 30, 2019 10:30, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote: I try to increase memory of HE VM (oVirt 4.2.8). If i do it from manager UI, i see that hot plug works - new memory devices appear and corresponding memory increase appeares inside engine guest. But 'Memory Size' property of hosted engine (in manager UI) don't reflect that new amount of memory. Also after reboot of engine vm, memory size changes back to initial value. Is it possible to change memory size of HE vm ( as far as i know the settings stored in ovf on HE domain) and how i can make this change to be persistent. --Best regardsAlexey _______________________________________________Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IKID3B2TH3VR27...
On Thu, May 30, 2019 at 3:39 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:
Hi Alexey,
better open a bug for that. If the Description is updated, but after a reboot the engine is still using the old values - it seems that it is a bug.
Yes, absolutely. Thanks
Best Regards, Strahil Nikolov
В четвъртък, 30 май 2019 г., 9:26:51 ч. Гринуич-4, Valkov, Alexey < Valkov.Alexey@knauf.ru> написа:
Indeed, after edit HE VM settings via manager UI, ovf update triggered immediately (checked in /var/log/ovirt-engine/engine.log). I dumped HE ovf_store and untar <he_vm_id>.ovf fom it. And i checked that all changes i made for Descriprion, MaxMemorySizeMb, minGuaranteedMemoryMb applyed (written to ovf) and remains after reboot. It works as expected. But not for memory or Memory Size - this settings remained initial and not written to ovf. Well, memory hotplug works - via adding new memory devices, but after reboot this memory devices detached but Memory Size not increased.
-- Best regards Alexey
Actually, you need to untar the OVF from the shared storage and check the configuration from the tar. Just keep it like that (running ) and tomorrow power down and then up the HostedEngine.
Best Regards, Strahil Nikolov On May 30, 2019 12:06, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote:
Hello, Strahil. I've just tried with *engine-config -s OvfUpdateIntervalInMinutes=1 systemctl restart ovirt-engine.service* After that, i changed Memory Size in manager UI. And waited about 30 minutes. Then checked memSize in /var/run/ovirt-hosted-engine-ha/vm.conf (which if i right understand syncronized with ovf every minute) and saw memSize have not been changed. And Memory Size property (in manager UI) also remains initial. Thus i think that ovf dont changes. I return OvfUpdateIntervalInMinutes=60 and will wait till tomorrow, may be the setting will be magically aplyed.
-- Best regards Alexey
Hi Alexey, How much time did you check before rebooting. I have noticed ,that despite the default OVF update interval of 1 hour, it takes 5-6 hours for the engine to update the OVF.
Best Regards, Strahil Nikolov On May 30, 2019 10:30, "Valkov, Alexey" <Valkov.Alexey@knauf.ru> wrote:
I try to increase memory of HE VM (oVirt 4.2.8). If i do it from manager UI, i see that hot plug works - new memory devices appear and corresponding memory increase appeares inside engine guest. But 'Memory Size' property of hosted engine (in manager UI) don't reflect that new amount of memory. Also after reboot of engine vm, memory size changes back to initial value. Is it possible to change memory size of HE vm ( as far as i know the settings stored in ovf on HE domain) and how i can make this change to be persistent.
-- Best regards Alexey
_______________________________________________
Users mailing list --
<users@ovirt.org>
users@ovirt.org
To unsubscribe send an email to
<users-leave@ovirt.org>
users-leave@ovirt.org
Privacy Statement:
<https://www.ovirt.org/site/privacy-policy/>
https://www.ovirt.org/site/privacy-policy
/
oVirt Code of Conduct:
<https://www.ovirt.org/community/about/community-guidelines/>
https://www.ovirt.org/community/about/community-guidelines
/
List Archives:
<https://lists.ovirt.org/archives/list/users@ovirt.org/message/IKID3B2TH3VR273KZNQB4QC66WYC4PCQ/>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IKID3B2TH3VR27...
/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PKCLZCNLA2U7VX...
-- Simone Tiraboschi He / Him / His Principal Software Engineer Red Hat <https://www.redhat.com/> stirabos@redhat.com @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit>
participants (4)
-
Simone Tiraboschi -
Strahil -
Strahil Nikolov
-
Valkov, Alexey