2:04 a.m.
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access the dashboard
in UI as there is only "Loading data..." displayed. There are postgres processes
running on the engine taking 100% cpu. One is running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_disks_resources_usage_samples
samples INNER JOIN v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS total,
AVG(used) AS used, MAX(previous_used) AS previous_used, MAX(previous_total) AS
previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_disks_resources_usage_samples
samples INNER JOIN v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC...
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
2:02 a.m.
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
*Regards,*
*Shani Leviim*
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to
access the dashboard in UI as there is only “Loading data…” displayed.
There are postgres processes running on the engine taking 100% cpu. One is
running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total)
AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
2:46 a.m.
Hi,
I am not using hosted engine but a dedicated installation. The upgrade was performed
with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
Von: Shani Leviim <sleviim(a)redhat.com>
Gesendet: Sonntag, 16. Juni 2019 09:03
An: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Cc: users(a)ovirt.org
Betreff: Re: [ovirt-users] Cannot access dashboard after upgrading to 4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
Regards,
Shani Leviim
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access the
dashboard in UI as there is only “Loading data…” displayed. There are postgres processes
running on the engine taking 100% cpu. One is running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS total,
AVG(used) AS used, MAX(previous_used) AS previous_used, MAX(previous_total) AS
previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
3:34 a.m.
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
Shirly Radco
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
<https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade
was performed with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
*Von:* Shani Leviim <sleviim(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 09:03
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* users(a)ovirt.org
*Betreff:* Re: [ovirt-users] Cannot access dashboard after upgrading to
4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
*Regards,*
*Shani Leviim*
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to
access the dashboard in UI as there is only “Loading data…” displayed.
There are postgres processes running on the engine taking 100% cpu. One is
running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total)
AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
4:04 a.m.
Hi,
Please attach here the result of the following query from the
ovirt_engine_history db:
SELECT id, version, script, checksum, installed_by, started_at, ended_at,
state, current, comment
FROM schema_version
ORDER BY version DESC limit 10 ;
Best regards,
--
Shirly Radco
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
<https://www.redhat.com/>
---------- Forwarded message ---------
From: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Date: Sun, Jun 16, 2019 at 11:42 AM
Subject: AW: [ovirt-users] Re: Cannot access dashboard after upgrading to
4.3.4
To: sradco(a)redhat.com <sradco(a)redhat.com>
Cc: sleviim(a)redhat.com <sleviim(a)redhat.com>, users(a)ovirt.org <
users(a)ovirt.org>
Hi,
rebooted oVirt engine VM (no hosted engine), same result. DHW packages
are:
ovirt-engine-dwh.noarch 4.3.0-1.el7 @ovirt-4.3
ovirt-engine-dwh-setup.noarch 4.3.0-1.el7 @ovirt-4.3
After reboot the following two queries start running again (they were
running for more than 24 hours before this reboot):
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total,
MAX(vm_disk_usage_percent) AS us
age_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0) AS previous_used,
COALESCE(MAX(previous_
total_size), 0) AS previous_total, CASE WHEN MAX(vm_disk_size_mb) = 0 THEN
0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb)
* 100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_
disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id INNER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id =
devices.vm_id INNER JO
IN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT vm_name,
AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_tota
l_size FROM (SELEC
All the best,
Oliver
*Von:* Shirly Radco <sradco(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 10:34
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* sleviim(a)redhat.com; users(a)ovirt.org
*Betreff:* Re: [ovirt-users] Re: Cannot access dashboard after upgrading to
4.3.4
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
*Shirly Radco*
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
[image: Das Bild wurde vom Absender entfernt.] <https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade
was performed with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
*Von:* Shani Leviim <sleviim(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 09:03
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* users(a)ovirt.org
*Betreff:* Re: [ovirt-users] Cannot access dashboard after upgrading to
4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
*Regards,*
*Shani Leviim*
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access
the dashboard in UI as there is only “Loading data…” displayed. There are
postgres processes running on the engine taking 100% cpu. One is running
for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS
total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
4:07 a.m.
New subject: Cannot access dashboard after upgrading to 4.3.4
Hi,
ovirt_engine_history=# SELECT id, version, script, checksum, installed_by, started_at,
ended_at, state, current, comment
FROM schema_version
ORDER BY version DESC limit 10 ;
id | version | script |
checksum | installed_by | started_at |
ended_at | state | current |
comment
----+----------+-------------------------------------------------------------------+----------------------------------+----------------------+----------------------------+----------------------------+-----------+---------+-----------
--------------------
50 | 04030020 | upgrade/04_03_0020_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2019-06-14 18:14:44.960503 |
2019-06-14 18:14:44.991593 | SKIPPED | t | Installed
already by 04020040
49 | 04030010 | upgrade/04_03_0010_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2019-06-14 18:14:44.904426 |
2019-06-14 18:14:44.935725 | SKIPPED | f | Installed
already by 04020030
48 | 04020040 | upgrade/04_02_0040_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2018-07-07 14:34:42.505446 |
2018-07-07 14:36:31.662577 | INSTALLED | f |
47 | 04020030 | upgrade/04_02_0030_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2018-07-07 14:34:42.438056 |
2018-07-07 14:34:42.482705 | INSTALLED | f |
46 | 04020020 | upgrade/04_02_0020__updated_vm_interface_history_id_to_bigint.sql |
58a8afa29fc720dc87f37b7f9c9e0151 | ovirt_engine_history | 2018-04-18 17:17:04.908667 |
2018-04-18 17:17:39.111339 | INSTALLED | f |
45 | 04020010 | upgrade/04_02_0010_updated_vm_template_name_length.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2018-01-05 09:56:39.213757 |
2018-01-05 09:56:39.238775 | SKIPPED | f | Installed
already by 04010020
44 | 04010020 | upgrade/04_01_0020_updated_vm_template_name_lentgh.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2017-10-05 13:53:04.225474 |
2017-10-05 13:53:04.269508 | INSTALLED | f |
43 | 04010010 | upgrade/04_01_0010_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2017-02-03 13:16:18.29672 |
2017-02-03 13:16:18.320728 | SKIPPED | f | Installed
already by 04000050
42 | 04000050 | upgrade/04_00_0050_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2016-10-03 15:13:33.856501 |
2016-10-03 15:13:34.010135 | INSTALLED | f |
41 | 04000040 | upgrade/04_00_0040_drop_all_history_db_foreign_keys.sql |
ed8b2c02bea97d0ee21f737614a2d5e3 | ovirt_engine_history | 2016-10-03 15:13:33.763905 |
2016-10-03 15:13:33.839532 | INSTALLED | f |
(10 rows)
All the best,
Oliver
Von: Shirly Radco <sradco(a)redhat.com>
Gesendet: Sonntag, 16. Juni 2019 11:04
An: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Cc: sleviim(a)redhat.com; users(a)ovirt.org; Eli Mesika <emesika(a)redhat.com>; Yedidyah
Bar David <didi(a)redhat.com>
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please attach here the result of the following query from the ovirt_engine_history db:
SELECT id, version, script, checksum, installed_by, started_at, ended_at, state, current,
comment
FROM schema_version
ORDER BY version DESC limit 10 ;
Best regards,
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
<https://www.redhat.com/>
---------- Forwarded message ---------
From: Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Date: Sun, Jun 16, 2019 at 11:42 AM
Subject: AW: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
To: sradco@redhat.com<mailto:sradco@redhat.com>
<sradco@redhat.com<mailto:sradco@redhat.com>>
Cc: sleviim@redhat.com<mailto:sleviim@redhat.com>
<sleviim@redhat.com<mailto:sleviim@redhat.com>>,
users@ovirt.org<mailto:users@ovirt.org>
<users@ovirt.org<mailto:users@ovirt.org>>
Hi,
rebooted oVirt engine VM (no hosted engine), same result. DHW packages are:
ovirt-engine-dwh.noarch 4.3.0-1.el7 @ovirt-4.3
ovirt-engine-dwh-setup.noarch 4.3.0-1.el7 @ovirt-4.3
After reboot the following two queries start running again (they were running for more
than 24 hours before this reboot):
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_usage_percent) AS us
age_percent FROM (SELECT history_datetime, vms.vm_name AS name, SUM(vm_disk_size_mb) AS
total, SUM(vm_disk_actual_size_mb) AS used, COALESCE(MAX(previous_actual_size), 0) AS
previous_used, COALESCE(MAX(previous_
total_size), 0) AS previous_total, CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) * 100) END AS
vm_disk_usage_percent FROM v4_2_statistics_vms_
disks_resources_usage_samples samples INNER JOIN v4_2_latest_configuration_vms_devices
devices ON devices.device_id = vm_disk_id INNER JOIN v4_2_latest_configuration_vms vms ON
vms.vm_id = devices.vm_id INNER JO
IN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT vm_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_tota
l_size FROM (SELEC
All the best,
Oliver
Von: Shirly Radco <sradco@redhat.com<mailto:sradco@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 10:34
An: Albl, Oliver <Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: sleviim@redhat.com<mailto:sleviim@redhat.com>;
users@ovirt.org<mailto:users@ovirt.org>
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
<https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade was performed
with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
Von: Shani Leviim <sleviim@redhat.com<mailto:sleviim@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 09:03
An: Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Betreff: Re: [ovirt-users] Cannot access dashboard after upgrading to 4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
Regards,
Shani Leviim
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access the
dashboard in UI as there is only “Loading data…” displayed. There are postgres processes
running on the engine taking 100% cpu. One is running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS total,
AVG(used) AS used, MAX(previous_used) AS previous_used, MAX(previous_total) AS
previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
5:07 a.m.
Hi,
Please open a bug with the details you added here.
Please attach setup logs (all of them since 4.2, including) and
ovirt-engine-dwh log so we can investigate this issue.
If you stop ovirt-engine-dwhd process, does pg calm down?
Thank you
--
Shirly Radco
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
<https://www.redhat.com/>
On Sun, Jun 16, 2019 at 12:07 PM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi,
ovirt_engine_history=# SELECT id, version, script, checksum, installed_by,
started_at, ended_at, state, current, comment
FROM schema_version
ORDER BY version DESC limit 10 ;
id | version |
script | checksum
| installed_by | started_at |
ended_at | state | current |
comment
----+----------+-------------------------------------------------------------------+----------------------------------+----------------------+----------------------------+----------------------------+-----------+---------+-----------
--------------------
50 | 04030020 |
upgrade/04_03_0020_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2019-06-14
18:14:44.960503 | 2019-06-14 18:14:44.991593 | SKIPPED | t |
Installed
already by 04020040
49 | 04030010 |
upgrade/04_03_0010_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2019-06-14
18:14:44.904426 | 2019-06-14 18:14:44.935725 | SKIPPED | f |
Installed
already by 04020030
48 | 04020040 |
upgrade/04_02_0040_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2018-07-07
14:34:42.505446 | 2018-07-07 14:36:31.662577 | INSTALLED | f |
47 | 04020030 |
upgrade/04_02_0030_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2018-07-07
14:34:42.438056 | 2018-07-07 14:34:42.482705 | INSTALLED | f |
46 | 04020020 |
upgrade/04_02_0020__updated_vm_interface_history_id_to_bigint.sql |
58a8afa29fc720dc87f37b7f9c9e0151 | ovirt_engine_history | 2018-04-18
17:17:04.908667 | 2018-04-18 17:17:39.111339 | INSTALLED | f |
45 | 04020010 |
upgrade/04_02_0010_updated_vm_template_name_length.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2018-01-05
09:56:39.213757 | 2018-01-05 09:56:39.238775 | SKIPPED | f |
Installed
already by 04010020
44 | 04010020 |
upgrade/04_01_0020_updated_vm_template_name_lentgh.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2017-10-05
13:53:04.225474 | 2017-10-05 13:53:04.269508 | INSTALLED | f |
43 | 04010010 |
upgrade/04_01_0010_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2017-02-03
13:16:18.29672 | 2017-02-03 13:16:18.320728 | SKIPPED | f |
Installed
already by 04000050
42 | 04000050 |
upgrade/04_00_0050_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2016-10-03
15:13:33.856501 | 2016-10-03 15:13:34.010135 | INSTALLED | f |
41 | 04000040 |
upgrade/04_00_0040_drop_all_history_db_foreign_keys.sql |
ed8b2c02bea97d0ee21f737614a2d5e3 | ovirt_engine_history | 2016-10-03
15:13:33.763905 | 2016-10-03 15:13:33.839532 | INSTALLED | f |
(10 rows)
All the best,
Oliver
*Von:* Shirly Radco <sradco(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 11:04
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* sleviim(a)redhat.com; users(a)ovirt.org; Eli Mesika <emesika(a)redhat.com>;
Yedidyah Bar David <didi(a)redhat.com>
*Betreff:* Re: [ovirt-users] Re: Cannot access dashboard after upgrading
to 4.3.4
Hi,
Please attach here the result of the following query from the
ovirt_engine_history db:
SELECT id, version, script, checksum, installed_by, started_at, ended_at,
state, current, comment
FROM schema_version
ORDER BY version DESC limit 10 ;
Best regards,
--
*Shirly Radco*
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
[image: Das Bild wurde vom Absender entfernt.] <https://www.redhat.com/>
---------- Forwarded message ---------
From: *Albl, Oliver* <Oliver.Albl(a)fabasoft.com>
Date: Sun, Jun 16, 2019 at 11:42 AM
Subject: AW: [ovirt-users] Re: Cannot access dashboard after upgrading to
4.3.4
To: sradco(a)redhat.com <sradco(a)redhat.com>
Cc: sleviim(a)redhat.com <sleviim(a)redhat.com>, users(a)ovirt.org <
users(a)ovirt.org>
Hi,
rebooted oVirt engine VM (no hosted engine), same result. DHW packages
are:
ovirt-engine-dwh.noarch 4.3.0-1.el7 @ovirt-4.3
ovirt-engine-dwh-setup.noarch 4.3.0-1.el7 @ovirt-4.3
After reboot the following two queries start running again (they were
running for more than 24 hours before this reboot):
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total,
MAX(vm_disk_usage_percent) AS us
age_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0) AS previous_used,
COALESCE(MAX(previous_
total_size), 0) AS previous_total, CASE WHEN MAX(vm_disk_size_mb) = 0 THEN
0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb)
* 100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_
disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id INNER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id =
devices.vm_id INNER JO
IN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT vm_name,
AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_tota
l_size FROM (SELEC
All the best,
Oliver
*Von:* Shirly Radco <sradco(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 10:34
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* sleviim(a)redhat.com; users(a)ovirt.org
*Betreff:* Re: [ovirt-users] Re: Cannot access dashboard after upgrading
to 4.3.4
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
*Shirly Radco*
BI Senior Software Engineer
Red Hat <https://www.redhat.com/>
[image: Das Bild wurde vom Absender entfernt.] <https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade
was performed with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
*Von:* Shani Leviim <sleviim(a)redhat.com>
*Gesendet:* Sonntag, 16. Juni 2019 09:03
*An:* Albl, Oliver <Oliver.Albl(a)fabasoft.com>
*Cc:* users(a)ovirt.org
*Betreff:* Re: [ovirt-users] Cannot access dashboard after upgrading to
4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
*Regards,*
*Shani Leviim*
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver <Oliver.Albl(a)fabasoft.com>
wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to
access the dashboard in UI as there is only “Loading data…” displayed.
There are postgres processes running on the engine taking 100% cpu. One is
running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total)
AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name
AS name, SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS
used, COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total,
CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id
INNER JOIN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id =
samples.vm_disk_id LEFT OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
6:46 a.m.
New subject: Cannot access dashboard after upgrading to 4.3.4
Hi,
I filed https://bugzilla.redhat.com/show_bug.cgi?id=1721481
Stopping ovirt-engine-dwhd does not terminate the long running queries.
All the best,
Oliver
Von: Shirly Radco <sradco(a)redhat.com>
Gesendet: Montag, 17. Juni 2019 12:08
An: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Cc: sleviim(a)redhat.com; users(a)ovirt.org; emesika(a)redhat.com; didi(a)redhat.com
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please open a bug with the details you added here.
Please attach setup logs (all of them since 4.2, including) and ovirt-engine-dwh log so we
can investigate this issue.
If you stop ovirt-engine-dwhd process, does pg calm down?
Thank you
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
[https://marketing-outfit-prod-images.s3-us-west-2.amazonaws.com/f5445ae0c...
On Sun, Jun 16, 2019 at 12:07 PM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi,
ovirt_engine_history=# SELECT id, version, script, checksum, installed_by, started_at,
ended_at, state, current, comment
FROM schema_version
ORDER BY version DESC limit 10 ;
id | version | script |
checksum | installed_by | started_at |
ended_at | state | current |
comment
----+----------+-------------------------------------------------------------------+----------------------------------+----------------------+----------------------------+----------------------------+-----------+---------+-----------
--------------------
50 | 04030020 | upgrade/04_03_0020_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2019-06-14 18:14:44.960503 |
2019-06-14 18:14:44.991593 | SKIPPED | t | Installed
already by 04020040
49 | 04030010 | upgrade/04_03_0010_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2019-06-14 18:14:44.904426 |
2019-06-14 18:14:44.935725 | SKIPPED | f | Installed
already by 04020030
48 | 04020040 | upgrade/04_02_0040_update_rx_tx_rate_percition.sql |
c480b070cc69681cf62fb853f3d7139f | ovirt_engine_history | 2018-07-07 14:34:42.505446 |
2018-07-07 14:36:31.662577 | INSTALLED | f |
47 | 04020030 | upgrade/04_02_0030_update_network_name_length.sql |
a1a0d75560575cdc60c0bbaad2cda773 | ovirt_engine_history | 2018-07-07 14:34:42.438056 |
2018-07-07 14:34:42.482705 | INSTALLED | f |
46 | 04020020 | upgrade/04_02_0020__updated_vm_interface_history_id_to_bigint.sql |
58a8afa29fc720dc87f37b7f9c9e0151 | ovirt_engine_history | 2018-04-18 17:17:04.908667 |
2018-04-18 17:17:39.111339 | INSTALLED | f |
45 | 04020010 | upgrade/04_02_0010_updated_vm_template_name_length.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2018-01-05 09:56:39.213757 |
2018-01-05 09:56:39.238775 | SKIPPED | f | Installed
already by 04010020
44 | 04010020 | upgrade/04_01_0020_updated_vm_template_name_lentgh.sql |
4b5391f40e8787e3b1033635aafe18a1 | ovirt_engine_history | 2017-10-05 13:53:04.225474 |
2017-10-05 13:53:04.269508 | INSTALLED | f |
43 | 04010010 | upgrade/04_01_0010_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2017-02-03 13:16:18.29672 |
2017-02-03 13:16:18.320728 | SKIPPED | f | Installed
already by 04000050
42 | 04000050 | upgrade/04_00_0050_added_seconds_in_status_to_sample_tables.sql |
be7a1b2fc7f03d263b45a613d5bced03 | ovirt_engine_history | 2016-10-03 15:13:33.856501 |
2016-10-03 15:13:34.010135 | INSTALLED | f |
41 | 04000040 | upgrade/04_00_0040_drop_all_history_db_foreign_keys.sql |
ed8b2c02bea97d0ee21f737614a2d5e3 | ovirt_engine_history | 2016-10-03 15:13:33.763905 |
2016-10-03 15:13:33.839532 | INSTALLED | f |
(10 rows)
All the best,
Oliver
Von: Shirly Radco <sradco@redhat.com<mailto:sradco@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 11:04
An: Albl, Oliver <Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: sleviim@redhat.com<mailto:sleviim@redhat.com>;
users@ovirt.org<mailto:users@ovirt.org>; Eli Mesika
<emesika@redhat.com<mailto:emesika@redhat.com>>; Yedidyah Bar David
<didi@redhat.com<mailto:didi@redhat.com>>
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please attach here the result of the following query from the ovirt_engine_history db:
SELECT id, version, script, checksum, installed_by, started_at, ended_at, state, current,
comment
FROM schema_version
ORDER BY version DESC limit 10 ;
Best regards,
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
[Das Bild wurde vom Absender entfernt.]<https://www.redhat.com/>
---------- Forwarded message ---------
From: Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Date: Sun, Jun 16, 2019 at 11:42 AM
Subject: AW: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
To: sradco@redhat.com<mailto:sradco@redhat.com>
<sradco@redhat.com<mailto:sradco@redhat.com>>
Cc: sleviim@redhat.com<mailto:sleviim@redhat.com>
<sleviim@redhat.com<mailto:sleviim@redhat.com>>,
users@ovirt.org<mailto:users@ovirt.org>
<users@ovirt.org<mailto:users@ovirt.org>>
Hi,
rebooted oVirt engine VM (no hosted engine), same result. DHW packages are:
ovirt-engine-dwh.noarch 4.3.0-1.el7 @ovirt-4.3
ovirt-engine-dwh-setup.noarch 4.3.0-1.el7 @ovirt-4.3
After reboot the following two queries start running again (they were running for more
than 24 hours before this reboot):
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_usage_percent) AS us
age_percent FROM (SELECT history_datetime, vms.vm_name AS name, SUM(vm_disk_size_mb) AS
total, SUM(vm_disk_actual_size_mb) AS used, COALESCE(MAX(previous_actual_size), 0) AS
previous_used, COALESCE(MAX(previous_
total_size), 0) AS previous_total, CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) * 100) END AS
vm_disk_usage_percent FROM v4_2_statistics_vms_
disks_resources_usage_samples samples INNER JOIN v4_2_latest_configuration_vms_devices
devices ON devices.device_id = vm_disk_id INNER JOIN v4_2_latest_configuration_vms vms ON
vms.vm_id = devices.vm_id INNER JO
IN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT vm_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_tota
l_size FROM (SELEC
All the best,
Oliver
Von: Shirly Radco <sradco@redhat.com<mailto:sradco@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 10:34
An: Albl, Oliver <Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: sleviim@redhat.com<mailto:sleviim@redhat.com>;
users@ovirt.org<mailto:users@ovirt.org>
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
[Das Bild wurde vom Absender entfernt.]<https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade was performed
with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
Von: Shani Leviim <sleviim@redhat.com<mailto:sleviim@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 09:03
An: Albl, Oliver <Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Betreff: Re: [ovirt-users] Cannot access dashboard after upgrading to 4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
Regards,
Shani Leviim
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access the dashboard
in UI as there is only “Loading data…” displayed. There are postgres processes running on
the engine taking 100% cpu. One is running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_disks_resources_usage_samples
samples INNER JOIN v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS total,
AVG(used) AS used, MAX(previous_used) AS previous_used, MAX(previous_total) AS
previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM v4_2_statistics_vms_disks_resources_usage_samples
samples INNER JOIN v4_2_latest_configuration_vms_devices devices ON devices.device_id =
vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size) AS
previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
3:46 a.m.
New subject: Cannot access dashboard after upgrading to 4.3.4
Hi,
rebooted oVirt engine VM (no hosted engine), same result. DHW packages are:
ovirt-engine-dwh.noarch 4.3.0-1.el7 @ovirt-4.3
ovirt-engine-dwh-setup.noarch 4.3.0-1.el7 @ovirt-4.3
After reboot the following two queries start running again (they were running for more
than 24 hours before this reboot):
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS previous_used,
MAX(previous_total) AS previous_total, MAX(vm_disk_usage_percent) AS us
age_percent FROM (SELECT history_datetime, vms.vm_name AS name, SUM(vm_disk_size_mb) AS
total, SUM(vm_disk_actual_size_mb) AS used, COALESCE(MAX(previous_actual_size), 0) AS
previous_used, COALESCE(MAX(previous_
total_size), 0) AS previous_total, CASE WHEN MAX(vm_disk_size_mb) = 0 THEN 0 ELSE
(CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/ MAX(vm_disk_size_mb) * 100) END AS
vm_disk_usage_percent FROM v4_2_statistics_vms_
disks_resources_usage_samples samples INNER JOIN v4_2_latest_configuration_vms_devices
devices ON devices.device_id = vm_disk_id INNER JOIN v4_2_latest_configuration_vms vms ON
vms.vm_id = devices.vm_id INNER JO
IN v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT vm_name, AVG(previous_actual_size) AS previous_actual_size,
AVG(previous_total_size) AS previous_tota
l_size FROM (SELEC
All the best,
Oliver
Von: Shirly Radco <sradco(a)redhat.com>
Gesendet: Sonntag, 16. Juni 2019 10:34
An: Albl, Oliver <Oliver.Albl(a)fabasoft.com>
Cc: sleviim(a)redhat.com; users(a)ovirt.org
Betreff: Re: [ovirt-users] Re: Cannot access dashboard after upgrading to 4.3.4
Hi,
Please try to restart postgres an ovirt-engine-dwhd.
It looks that this is a 4.2 query.
What version are the dwh packages?
Best,
--
Shirly Radco
BI Senior Software Engineer
Red Hat<https://www.redhat.com/>
<https://www.redhat.com/>
On Sun, Jun 16, 2019 at 11:10 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi,
I am not using hosted engine but a dedicated installation. The upgrade was performed
with following steps:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm
yum update "ovirt-*-setup*"
engine-setup
yum update
All the best,
Oliver
Von: Shani Leviim <sleviim@redhat.com<mailto:sleviim@redhat.com>>
Gesendet: Sonntag, 16. Juni 2019 09:03
An: Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Betreff: Re: [ovirt-users] Cannot access dashboard after upgrading to 4.3.4
Hi,
Did you run 'engine-setup' and 'yum update' after upgrading ovirt?
Taken from here as a reference:
https://ovirt.org/documentation/self-hosted/chap-upgrading_the_self-hoste...
Regards,
Shani Leviim
On Sat, Jun 15, 2019 at 10:26 AM Albl, Oliver
<Oliver.Albl@fabasoft.com<mailto:Oliver.Albl@fabasoft.com>> wrote:
Hi all,
I upgraded our installation from 4.2.8 to 4.3.4 and I am unable to access the
dashboard in UI as there is only “Loading data…” displayed. There are postgres processes
running on the engine taking 100% cpu. One is running for more than 14 hours:
SELECT name, AVG(total) AS total, AVG(used) AS used, MAX(previous_used) AS
previous_used, MAX(previous_total) AS previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_total_size FROM (SELEC
13783 | 2019-06-15 08:41:52.349769+02 | active | SELECT name, AVG(total) AS total,
AVG(used) AS used, MAX(previous_used) AS previous_used, MAX(previous_total) AS
previous_total, MAX(vm_disk_
usage_percent) AS usage_percent FROM (SELECT history_datetime, vms.vm_name AS name,
SUM(vm_disk_size_mb) AS total, SUM(vm_disk_actual_size_mb) AS used,
COALESCE(MAX(previous_actual_size), 0)
AS previous_used, COALESCE(MAX(previous_total_size), 0) AS previous_total, CASE WHEN
MAX(vm_disk_size_mb) = 0 THEN 0 ELSE (CAST(MAX(vm_disk_actual_size_mb) AS DECIMAL)/
MAX(vm_disk_size_mb) *
100) END AS vm_disk_usage_percent FROM
v4_2_statistics_vms_disks_resources_usage_samples samples INNER JOIN
v4_2_latest_configuration_vms_devices devices ON devices.device_id = vm_disk_id IN
NER JOIN v4_2_latest_configuration_vms vms ON vms.vm_id = devices.vm_id INNER JOIN
v4_2_latest_configuration_vms_disks disks ON disks.vm_disk_id = samples.vm_disk_id LEFT
OUTER JOIN (SELECT v
m_name, AVG(previous_actual_size) AS previous_actual_size, AVG(previous_total_size)
AS previous_total_size FROM (SELEC…
oVirt Engine is configured with 128 GB memory and 24 cores.
Please advice how to adress this.
Thank you and all the best,
Oliver
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJWRQKGCIHR...
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW6GWQ43ACO...
1767
days inactive
1770
days old
10 comments
3 participants
participants (3)
-
Albl, Oliver -
Shani Leviim -
Shirly Radco