Hi Daniel, There is no failure when uploading the ISO. I tried to upload it both to NFS and to iSCSI. In both cases it completes the upload and the status remains "completed". I can use the ISO from the storage domain without any problems so there are no errors. On Thu, Feb 7, 2019 at 3:04 PM Daniel Erez <derez@redhat.com> wrote:

On Thu, Feb 7, 2019 at 9:26 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:

...

Il giorno gio 7 feb 2019 alle ore 01:12 Hetz Ben Hamo <hetz@hetz.biz> ha scritto:

...

Hi,

I've just uploaded the CentOS 1810 ISO to a domain. It worked. However, the status in the UI is "stuck" in the "complete" in the status column. Does it change to "OK" as others images in the domain?

Hi Hetz,

The disk should move back to 'OK' status after completing the operation. In case of a failure during the operation, the disk moves to 'PAUSED' state, in which it can be either resumes or cancelled.

* What is the current status of the disk? * Any failure message in the events tab? * Can you please attach engine/vdsm/proxy/daemon logs? * If the upload can't be cancelled or resumed, the disk can be manually unlocked using the 'unlock_entity' utility:

https://www.ovirt.org/develop/developer-guide/db-issues/helperutilities.html...

...

Daniel, Tal, do we have page data refresh issue there?

...

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K5FEKILG2D7PO3...

--

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV

Red Hat EMEA <https://www.redhat.com/>

sbonazzo@redhat.com <https://red.ht/sig>

see this screenshot: https://imgur.com/a/Mzpn6qY תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org> On Thu, Feb 7, 2019 at 3:21 PM Daniel Erez <derez@redhat.com> wrote:

On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

Hi Daniel,

There is no failure when uploading the ISO. I tried to upload it both to NFS and to iSCSI. In both cases it completes the upload and the status remains "completed". I can use the ISO from the storage domain without any problems so there are no errors.

Where do you see this status? In REST-API? What is the status of the disk? ('Disks' tab in the WebAdmin)

...

On Thu, Feb 7, 2019 at 3:04 PM Daniel Erez <derez@redhat.com> wrote:

...

On Thu, Feb 7, 2019 at 9:26 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:

...

Il giorno gio 7 feb 2019 alle ore 01:12 Hetz Ben Hamo <hetz@hetz.biz> ha scritto:

...

Hi,

I've just uploaded the CentOS 1810 ISO to a domain. It worked. However, the status in the UI is "stuck" in the "complete" in the status column. Does it change to "OK" as others images in the domain?

Hi Hetz,

The disk should move back to 'OK' status after completing the operation. In case of a failure during the operation, the disk moves to 'PAUSED' state, in which it can be either resumes or cancelled.

* What is the current status of the disk? * Any failure message in the events tab? * Can you please attach engine/vdsm/proxy/daemon logs? * If the upload can't be cancelled or resumed, the disk can be manually unlocked using the 'unlock_entity' utility:

https://www.ovirt.org/develop/developer-guide/db-issues/helperutilities.html...

...

Daniel, Tal, do we have page data refresh issue there?

...

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K5FEKILG2D7PO3...

--

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV

Red Hat EMEA <https://www.redhat.com/>

sbonazzo@redhat.com <https://red.ht/sig>

Sure, care to tell me the locations of those files? (I assume they are on the HE?) Thanks On Thu, Feb 7, 2019 at 3:30 PM Daniel Erez <derez@redhat.com> wrote:

On Thu, Feb 7, 2019 at 3:25 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

see this screenshot: https://imgur.com/a/Mzpn6qY

ok, so maybe there was a failure in the finalizing step that should unlock the disk as well. Can you please attach the relevant engine/vdsm/proxy/daemon logs?

...

תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>

On Thu, Feb 7, 2019 at 3:21 PM Daniel Erez <derez@redhat.com> wrote:

...

On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

Hi Daniel,

There is no failure when uploading the ISO. I tried to upload it both to NFS and to iSCSI. In both cases it completes the upload and the status remains "completed". I can use the ISO from the storage domain without any problems so there are no errors.

Where do you see this status? In REST-API? What is the status of the disk? ('Disks' tab in the WebAdmin)

...

On Thu, Feb 7, 2019 at 3:04 PM Daniel Erez <derez@redhat.com> wrote:

...

On Thu, Feb 7, 2019 at 9:26 AM Sandro Bonazzola <sbonazzo@redhat.com> wrote:

...

Il giorno gio 7 feb 2019 alle ore 01:12 Hetz Ben Hamo <hetz@hetz.biz> ha scritto:

> Hi, > > I've just uploaded the CentOS 1810 ISO to a domain. It worked. > However, the status in the UI is "stuck" in the "complete" in the > status column. Does it change to "OK" as others images in the domain? >

Hi Hetz,

The disk should move back to 'OK' status after completing the operation. In case of a failure during the operation, the disk moves to 'PAUSED' state, in which it can be either resumes or cancelled.

* What is the current status of the disk? * Any failure message in the events tab? * Can you please attach engine/vdsm/proxy/daemon logs? * If the upload can't be cancelled or resumed, the disk can be manually unlocked using the 'unlock_entity' utility:

https://www.ovirt.org/develop/developer-guide/db-issues/helperutilities.html...

...

Daniel, Tal, do we have page data refresh issue there?

> _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/K5FEKILG2D7PO3... >

--

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV

Red Hat EMEA <https://www.redhat.com/>

sbonazzo@redhat.com <https://red.ht/sig>

I enclose a gzipped engine.log. As you can see there, the transfer is successful. תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org> On Thu, Feb 7, 2019 at 3:45 PM Daniel Erez <derez@redhat.com> wrote:

On Thu, Feb 7, 2019 at 3:32 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

Sure, care to tell me the locations of those files? (I assume they are on the HE?)

Yes, should be on /var/log folder. If you just want to unlock the disk in the mean time, you can use the 'unlock_entity' utility:

https://www.ovirt.org/develop/developer-guide/db-issues/helperutilities.html...

...

Thanks

On Thu, Feb 7, 2019 at 3:30 PM Daniel Erez <derez@redhat.com> wrote:

...

On Thu, Feb 7, 2019 at 3:25 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

see this screenshot: https://imgur.com/a/Mzpn6qY

ok, so maybe there was a failure in the finalizing step that should unlock the disk as well. Can you please attach the relevant engine/vdsm/proxy/daemon logs?

...

תודה, *חץ בן חמו* אתם מוזמנים לבקר בבלוג היעוץ <http://linvirtstor.net/> או בבלוג הפרטי שלי <http://benhamo.org>

On Thu, Feb 7, 2019 at 3:21 PM Daniel Erez <derez@redhat.com> wrote:

...

On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo <hetz@hetz.biz> wrote:

...

Hi Daniel,

There is no failure when uploading the ISO. I tried to upload it both to NFS and to iSCSI. In both cases it completes the upload and the status remains "completed". I can use the ISO from the storage domain without any problems so there are no errors.

Where do you see this status? In REST-API? What is the status of the disk? ('Disks' tab in the WebAdmin)

...

On Thu, Feb 7, 2019 at 3:04 PM Daniel Erez <derez@redhat.com> wrote:

> > > On Thu, Feb 7, 2019 at 9:26 AM Sandro Bonazzola <sbonazzo@redhat.com> > wrote: > >> >> >> Il giorno gio 7 feb 2019 alle ore 01:12 Hetz Ben Hamo < >> hetz@hetz.biz> ha scritto: >> >>> Hi, >>> >>> I've just uploaded the CentOS 1810 ISO to a domain. It worked. >>> However, the status in the UI is "stuck" in the "complete" in the >>> status column. Does it change to "OK" as others images in the domain? >>> >> > Hi Hetz, > > The disk should move back to 'OK' status after completing the > operation. > In case of a failure during the operation, the disk moves to > 'PAUSED' state, in which it can be either resumes or cancelled. > > * What is the current status of the disk? > * Any failure message in the events tab? > * Can you please attach engine/vdsm/proxy/daemon logs? > * If the upload can't be cancelled or resumed, the disk can be > manually unlocked using the 'unlock_entity' utility: > > https://www.ovirt.org/develop/developer-guide/db-issues/helperutilities.html... > > >> >> Daniel, Tal, do we have page data refresh issue there? >> >> >>> _______________________________________________ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-leave@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/K5FEKILG2D7PO3... >>> >> >> >> -- >> >> SANDRO BONAZZOLA >> >> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV >> >> Red Hat EMEA <https://www.redhat.com/> >> >> sbonazzo@redhat.com >> <https://red.ht/sig> >> >

On Fri, Feb 8, 2019 at 10:39 PM <ronjero@gmail.com> wrote:

...

On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo wrote:

Where do you see this status? In REST-API? What is the status of the disk? ('Disks' tab in the WebAdmin)

I am also seeing the same thing on a system I just upgraded from 4.2.8 to 4.3. After the upgrade, I uploaded a qcow2 image and it remains in the "Completed" state in the Disks tab of the WebAdmin.

The image itself works fine, I attached it to a new vm and it is running fine.

For Hetz it was due to a missing foreign key constraints in image_transfers table. Can you please check if 'fk_image_transfers_command_enitites'[*] exists by executing the following sql command: SELECT COUNT(1) FROM information_schema.table_constraints WHERE constraint_name='fk_image_transfers_command_enitites' AND table_name='image_transfers'; Also, can you please attach 'ovirt-engine-setup' log from after the upgrade to 4.3 [*] The constraint should be added by '04_03_0270_add_foreign_key_to_image_transfers.sql'

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L2EKJ6LYFCODW4...

On Sun, Feb 10, 2019 at 9:11 AM Hetz Ben Hamo <hetz@hetz.biz> wrote:

I've reinstalled the system yesterday. Now it automatically switches from "complete" to OK. Daniel, did you commit/push anything?

No, it should be fine on a clean installation. I suspect it's related only to upgrade. But need to see the setup logs from upgrade to understand to exact scenario.

On Sun, Feb 10, 2019 at 9:10 AM Daniel Erez <derez@redhat.com> wrote:

...

On Fri, Feb 8, 2019 at 10:39 PM <ronjero@gmail.com> wrote:

...

...

On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo wrote:

Where do you see this status? In REST-API? What is the status of the disk? ('Disks' tab in the WebAdmin)

I am also seeing the same thing on a system I just upgraded from 4.2.8 to 4.3. After the upgrade, I uploaded a qcow2 image and it remains in the "Completed" state in the Disks tab of the WebAdmin.

The image itself works fine, I attached it to a new vm and it is running fine.

For Hetz it was due to a missing foreign key constraints in image_transfers table. Can you please check if 'fk_image_transfers_command_enitites'[*] exists by executing the following sql command: SELECT COUNT(1) FROM information_schema.table_constraints WHERE constraint_name='fk_image_transfers_command_enitites' AND table_name='image_transfers';

Also, can you please attach 'ovirt-engine-setup' log from after the upgrade to 4.3

[*] The constraint should be added by '04_03_0270_add_foreign_key_to_image_transfers.sql'

...

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L2EKJ6LYFCODW4...

_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DRULD23ZP5SOCS...