I'm trying to test out the oVirt Hosted Engine, but am experiencing a failure early on and was hoping someone could point me in the right direction. I'm not familiar enough with the architecture of oVirt to start to debug this situation. Basically, I run the "hosted-engine --deploy" command and it outputs: ======================== [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine- setup/ovirt-hosted-engine-setup-20140122110741.log Version: otopi-1.2.0_beta (otopi-1.2.0-0.1.beta.fc19) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort. [ ERROR ] Failed to execute stage 'Environment customization': [Errno 111] Connection refused [ INFO ] Stage: Clean up [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination ======================== /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log has: ======================== 2014-01-22 11:07:57 DEBUG otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._check_existing_pools:631 getConnectedStoragePoolsList 2014-01-22 11:07:57 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../ plugins/ovirt-hosted-engine-setup/storage/storage.py", line 729, in _customization self._check_existing_pools() File "/usr/share/ovirt-hosted-engine-setup/scripts/../ plugins/ovirt-hosted-engine-setup/storage/storage.py", line 632, in _check_existing_pools pools = self.serv.s.getConnectedStoragePoolsList() File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ return self.__send(self.__name, args) File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request verbose=self.__verbose File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request self.send_content(h, request_body) File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content connection.endheaders(request_body) File "/usr/lib64/python2.7/httplib.py", line 969, in endheaders self._send_output(message_body) File "/usr/lib64/python2.7/httplib.py", line 829, in _send_output self.send(msg) File "/usr/lib64/python2.7/httplib.py", line 791, in send self.connect() File "/usr/lib64/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line 188, in connect sock = socket.create_connection((self.host, self.port), self.timeout) File "/usr/lib64/python2.7/socket.py", line 571, in create_connection raise err error: [Errno 111] Connection refused 2014-01-22 11:07:57 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment customization': [Errno 111] Connection refused ======================== Unfortunately I do not know what service this is trying to connect to, or what hostname or port to try to start debugging that. Some other useful information about my environment: - Fedora 19 (64bit), minimal install, selected 'standard' add-on utilities. This was a fresh install just for this test. - 512MB /boot ext4 - 80GB / ext4 in LVM, 220GB free in VG - "yum -y update" performed to get all latest updates - SElinux in permissive mode - Hardware: - Supermicro 1026T-URF barebones - single CPU populated (Xeon E5630 4x2.53GHz) - 12GB ECC DDR3 RAM - H/W Raid with SSDs - Networking: - Network Manager DISABLED - 4 GbE ports (p2p1, p2p2, em1, em2) - all 4 ports configured in a bond (bond0) using balance-alb - ovirtmgmt bridge pre-created with 'bond0' as the only member, assigned a static IP address - firewall DISABLED - /etc/yum.repos.d/ovirt.rep has ONLY the 3.4.0 beta repo enabled: [ovirt-3.4.0-beta] name=3.4.0 beta testing repo for the oVirt project baseurl=http://ovirt.org/releases/3.4.0-beta/rpm/Fedora/$releasever/ enabled=1 skip_if_unavailable=1 gpgcheck=0 - only other packages installed were "ntp" and "screen" - performed "yum install ovirt-hosted-engine-setup" then "screen" then "hosted-engine --deploy" Any guidance or things to test would be _greatly_ appreciated. Thanks! -Brad _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

On 01/22/2014 05:42 PM, Andrew Lau wrote: > Hi, > > This looks like this BZ which I reported https://bugzilla.redhat.com/ > show_bug.cgi?id=1055153 > > Did you customize your nics before you tried running hosted-engine > --deploy? > > Thanks, > Andrew > Yes, I created all the /etc/sysconfig/network-scripts/ifcfg-* for my 4 NICs in the bond, then also created the ifcfg-bond0, as well as an ifcfg-ovirtmgmt which uses the bond0. So the ovirt management interface should be fully configured before even running the hosted-engine --deploy ... when I was testing the all-in-one (non-hosted) I had to do that, so figured it was a good idea for hosted too. I'm trying to understand your BZ 1055153, did you actually get it to work? Or did you get stuck at that point? I have seen the same issue as your BZ 1055129 as well. -Brad _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

On 1/22/14 11:42 PM, Andrew Lau wrote: > That sounds exactly what I did, do you mind putting those log files into > the BZ saves me from having to find some > hardware and replicate it again. > > So what i did was I ended up just nuking the whole OS, and getting a > clean start. First after doing all your initial > prep EXCEPT configuring your 4 NICs run the "hosted-engine --deploy" > command twice. Assuming the first run fails always > like in my case, else once you get to the "Configure Storage" phase press > Ctrl + D to exit. > > Now configure your NICs (also configure ovirtmgmt manually as there is > another BZ about it not being able to create the > bridge) and rerun "hosted-engine --deploy" and you should be back in > action. This should get you to a working > hosted-engine solution. > > P.S. could you add me in the CC when you reply, I would've seen your > message sooner. > Weird, very very weird. I'll give it a shot and see what happens. Thanks! -Brad

I'm trying to test out the oVirt Hosted Engine, but am experiencing a failure early on and was hoping someone could point me in the right direction. I'm not familiar enough with the architecture of oVirt to start to debug this situation. Basically, I run the "hosted-engine --deploy" command and it outputs: ======================== [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log Version: otopi-1.2.0_beta (otopi-1.2.0-0.1.beta.fc19) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort. [ ERROR ] Failed to execute stage 'Environment customization': [Errno 111] Connection refused [ INFO ] Stage: Clean up [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination ======================== /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log has: ======================== 2014-01-22 11:07:57 DEBUG otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._check_existing_pools:631 getConnectedStoragePoolsList 2014-01-22 11:07:57 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 142, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 729, in _customization self._check_existing_pools() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", line 632, in _check_existing_pools pools = self.serv.s.getConnectedStoragePoolsList() File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ return self.__send(self.__name, args) File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request verbose=self.__verbose File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request self.send_content(h, request_body) File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content connection.endheaders(request_body) File "/usr/lib64/python2.7/httplib.py", line 969, in endheaders self._send_output(message_body) File "/usr/lib64/python2.7/httplib.py", line 829, in _send_output self.send(msg) File "/usr/lib64/python2.7/httplib.py", line 791, in send self.connect() File "/usr/lib64/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line 188, in connect sock = socket.create_connection((self.host, self.port), self.timeout) File "/usr/lib64/python2.7/socket.py", line 571, in create_connection raise err error: [Errno 111] Connection refused 2014-01-22 11:07:57 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Environment customization': [Errno 111] Connection refused ========================

Unfortunately I do not know what service this is trying to connect to, or what hostname or port to try to start debugging that. Some other useful information about my environment: - Fedora 19 (64bit), minimal install, selected 'standard' add-on utilities. This was a fresh install just for this test. - 512MB /boot ext4 - 80GB / ext4 in LVM, 220GB free in VG - "yum -y update" performed to get all latest updates - SElinux in permissive mode - Hardware: - Supermicro 1026T-URF barebones - single CPU populated (Xeon E5630 4x2.53GHz) - 12GB ECC DDR3 RAM - H/W Raid with SSDs - Networking: - Network Manager DISABLED - 4 GbE ports (p2p1, p2p2, em1, em2) - all 4 ports configured in a bond (bond0) using balance-alb - ovirtmgmt bridge pre-created with 'bond0' as the only member, assigned a static IP address - firewall DISABLED - /etc/yum.repos.d/ovirt.rep has ONLY the 3.4.0 beta repo enabled: [ovirt-3.4.0-beta] name=3.4.0 beta testing repo for the oVirt project baseurl=http://ovirt.org/releases/3.4.0-beta/rpm/Fedora/$releasever/ enabled=1 skip_if_unavailable=1 gpgcheck=0 - only other packages installed were "ntp" and "screen" - performed "yum install ovirt-hosted-engine-setup" then "screen" then "hosted-engine --deploy" Any guidance or things to test would be _greatly_ appreciated. Thanks! -Brad _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

On 01/23/2014 08:30 AM, Sandro Bonazzola wrote: > It seems that VDSM is not working on your system. > Can you attach vdsm logs? > vdsm log is empty # ls -l /var/log/vdsm/vdsm.log -rw-r--r-- 1 root root 0 Jan 20 10:13 /var/log/vdsm/vdsm.log # ps -ef | grep -i vdsm root 1628 1 0 09:16 ? 00:00:00 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock # service vdsmd status Redirecting to /bin/systemctl status vdsmd.service vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled) Active: failed (Result: start-limit) since Thu 2014-01-23 09:16:38 EST; 1min 26s ago Process: 2387 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS) Process: 2380 ExecStart=/usr/share/vdsm/daemonAdapter -0 /dev/null -1 /dev/null -2 /dev/null /usr/share/vdsm/vdsm (code=exited, status=1/FAILURE) Process: 2328 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Unit vdsmd.service entered failed state. Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: vdsmd.service holdoff time over, scheduling restart. Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Stopping Virtual Desktop Server Manager... Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Starting Virtual Desktop Server Manager... Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: vdsmd.service start request repeated too quickly, refusing to start.

Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Failed to start Virtual Desktop Server Manager. Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Unit vdsmd.service entered failed state. I've attached the supervdsm.log and ovirt-hosted-engine-setup-20140123091611.log incase that's helpful. Thanks. -Brad

On 01/23/2014 09:24 AM, Sandro Bonazzola wrote: >> # service vdsmd status >> >Redirecting to /bin/systemctl status vdsmd.service >> >vdsmd.service - Virtual Desktop Server Manager >> > Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled) >> > Active: failed (Result: start-limit) since Thu 2014-01-23 09:16:38 EST; 1min 26s ago >> > Process: 2387 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh --post-stop (code=exited, status=0/SUCCESS) >> > Process: 2380 ExecStart=/usr/share/vdsm/daemonAdapter -0 /dev/null -1 /dev/null -2 /dev/null /usr/share/vdsm/vdsm (code=exited, status=1/FAILURE) >> > Process: 2328 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh --pre-start (code=exited, status=0/SUCCESS) >> > >> >Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Unit vdsmd.service entered failed state. >> >Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: vdsmd.service holdoff time over, scheduling restart. >> >Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Stopping Virtual Desktop Server Manager... >> >Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: Starting Virtual Desktop Server Manager... >> >Jan 23 09:16:38 ovirttest.internal.monetra.com systemd[1]: vdsmd.service start request repeated too quickly, refusing to start. > what's this ^^^^. It's the first start of vdsmd! I'm not sure I understand the meaning of this reply :/

Thanks. -Brad

Where/how do you change the "Defined Memory" after a VM is created?